Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1428

Reformat results as: short short into frame detailed detailed into frame

_id	9c41
authors	Ahmad Rafi, M.E., Chee W.K., Mai, N., Ken, T.-K. N. and Sharifah Nur, A.S.A. (Eds.)
year	2002
title	CAADRIA 2002 [Conference Proceedings]
doi	https://doi.org/10.52842/conf.caadria.2002.
source	Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X / Cyberjaya (Malaysia) 18–20 April 2002, 370 p.
summary	Evolution of trends in the realm of computer aided architectural design (CAAD) has seen the convergence of technologies – complementing traditional tools with emerging sciences like Information Technology (IT) and multimedia applications. This appliqué of technologies has not just expanded the scope and enhanced the realm of CAAD research and practice, but is also breaking new frontiers. This creative nexus will be realised at the 7th International Conference on Computer Aided Architectural Design Research In Asia (CAADRIA 2002) to be held at the Faculty of Creative Multimedia, Multimedia University, Malaysia, between 18th-20th April, 2002. CAADRIA 2002’s theme, "Redefining Content", seeks to recognise and infuse these emerging components in the field of architecture and design with a holistic approach towards online, digital and interactive systems. The 41 papers compiled were selected through a blind review process conducted by an international review panel. To reflect the multi-disciplinary nature of this year's conference, the chapters are arranged topically to facilitate the in-depth study of key components. The component sessions include: // Web Design, Database and Networks // CAD, Modelling and Tools // Collaborative Design, Creative Design and Case Reasoning // Simulation and Prototyping // Virtual Environment and Knowledge Management // Design Education, Teaching and Learning /// We believe that this specialised approach will provide a deeper and more illuminating feel of the various components and their critical convergence in the field of architecture and design.
series	CAADRIA
email
more	www.caadria.org
last changed	2022/06/07 07:54

_id	ddssup0201
id	ddssup0201
authors	Alexiou, K. and Zamenopoulos, T.
year	2002
title	Artificial Design and Planning Support: Interactive Plan Generation andCoordination in Distributed Decision-Making
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	In this paper we discuss some basic issues pertaining to artificial plan design as a paradigm for architectural design and urban planning support. We present a model for artificial design generation based on learning control methodologies. Plan design is seen as a search for "coordinated" solutions (changes) that satisfy distributed domain requirements and views expressed by human or artificial agents. Learning control is used as a method to search for solutions that direct partial descriptionsproduced by agents, to follow their dynamically defined targets -despite conflicting requirements. The model is simulated for land use and layout plan design, involving decisions for the location and physical configuration of a hypothetical housing and retail development.
series	DDSS
last changed	2003/11/21 15:15

_id	fce1
authors	Anumba, C.J. and Ruikar, K.
year	2002
title	Electronic commerce in construction-trends and prospects
source	Automation in Construction 11 (3) (2002) pp. 265-275
summary	There is growing interest in the conduct of business transactions by electronic means through the Internet and/or dedicated networks; this is often referred to as electronic commerce. This paper reviews developments in electronic commerce, with a particular focus on its applicability and uptake within the construction industry. Electronic commerce business models are reviewed and the enablers and barriers to their uptake in the construction sector presented. The paper concludes with future trends in electronic commerce and the need for construction organisations to make the necessary investments that will enable them to take advantage of these.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ga0217
id	ga0217
authors	Bentley, Katie A.
year	2002
title	Exploring Aesthetic Pattern Formation
source	International Conference on Generative Art
summary	This paper is an exploration of an interdisciplinary nature. Through studies in fine art, pattern formation in nature, and artificial life, a mechanism for the artistic process is presented. Asynchronous updating schemes implemented in cellular automata and pheromonal agent swarms were evolved to produce aesthetic patterns and compared favourably to non-evolved synchronous production methods. The curious adaptive properties of the resulting patterns were investigated.
series	other
email
more	http://www.generativeart.com/
last changed	2003/11/21 15:16

_id	59ca
authors	Bhavnani, S.K. and Bates, M.J.
year	2002
title	Separating the Knowledge Layers: Cognitive Analysis of Search Knowledge Through Hierarchical Goal Decompositions
source	Proceedings of the ASIST'2002 (2002), 204-213
summary	Hierarchical goal decompositions have proved to be a useful method to make explicit the knowledge required by users to perform tasks in a wide range of applications such as computeraided drafting (CAD) systems. This analysis method progressively decomposes a given task starting from the task layer on the top of the decomposition, to the keystroke layer at the bottom. The analysis enables a close inspection of the knowledge required to perform the task at each layer of the decomposition. In this paper we show how the method of hierarchical goal decomposition can be used to understand more precisely the knowledge that is required to perform information search tasks. The analysis pinpoints: (1) the critical strategies in the intermediate layers of knowledge that are known by experts searchers; (2) why such knowledge is difficult to acquire by novice searchers; (3) how the analysis provides testable predictions of behavior based on the acquisition of different types of knowledge. We conclude by discussing the advantages provided by hierarchical goal decompositions, and how such an approach can lead to the design of systems and training.
series	other
email
last changed	2003/11/21 15:16

_id	b13d
authors	Broek, J.J., Horváth, I., Smit, B. de, Lennings, A.F., Rusák, Z. and Vergeest, J.S.M.
year	2002
title	Free-form thick layer object manufacturing technology for large-sized physical models
source	Automation in Construction 11 (3) (2002) pp. 335-347
summary	Large-sized free-form objects of different materials are widely used in various industrial applications. Currently, layered rapid prototyping technologies are not suitable for the fabrication of this kind of objects, due to the necessity of a large number of layers and the limitations in size. This paper reports a novel approach of layered manufacturing that is more appropriate for the fabrication of these large objects. A method of thick-layered object manufacturing is presented, which is based on a higher order approximation of the shape and application of a flexible curved cutting tool.The method allows the production of physical prototypes, which need little or no finishing. In order to meet the designer's intend, as closely as possible, some feasible system characteristics are introduced. The process is ordered in a sequential way and provides a highly automated process. A hierarchical decomposition of the CAD geometry takes place into components, segments, layers and sectors, based on morphological analysis. This method enables the manufacturing and the re-assembly of the parts to produce the physical prototypes without affecting the requested functionality. Due to the possibility of obtaining multiple solutions in the physical model, much attention must be paid to the efficiency of the process.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	e8d7
authors	Cagan, J. Shimada, K. and Yin, S.
year	2002
title	A survey of computational approaches to three-dimensional layout problems
source	Computer-Aided Design, Vol. 34 (8) (2002) pp. 597-611
summary	The component layout or packaging problem requires efficient search of large, discontinuous spaces. This survey paper reviews the state-of-the-art in product layoutalgorithms. The focus on optimization and geometric interference calculation strategies addresses the common aspects of the layout problem for all applications.
keywords	Intelligent Packaging, Product Layout, Optimization, Stochastic Optimization
series	journal paper
last changed	2003/05/15 21:33

_id	82ac
authors	Caldas, Luisa Gama and Norford, Leslie K.
year	2002
title	A design optimization tool based on a genetic algorithm
source	Automation in Construction 11 (2) (2002) pp. 173-184
summary	Much interest has been recently devoted to generative processes in design. Advances in computational tools for design applications, coupled with techniques from the field of artificial intelligence, have lead to new possibilities in the way computers can inform and actively interact with the design process.In this paper, we use the concepts of generative and goal-oriented design to propose a computer tool that can help the designer to generate and evaluate certain aspects of a solution towards an optimized behavior of the final configuration. This work focuses mostly on those aspects related to the environmental performance of buildings.Genetic Algorithms (GAs) are applied as a generative and search procedure to look for optimized design solutions in terms of thermal and lighting performance in a building. The GA is first used to generate possible design solutions, which are then evaluated in terms of lighting and thermal behavior using a detailed thermal analysis program (DOE2.1E). The results from the simulations are subsequently used to further guide the GA search towards finding low-energy solutions to the problem under study. Solutions can be visualized using an AutoLisp routine.The specific problem addressed in this study is the placing and sizing of windows in an office building. The same method is applicable to a wide range of design problems like the choice of construction materials, design of shading elements, or sizing of lighting and mechanical systems for buildings.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	2cd9
authors	Ceccato, C. Fischer, Th., Li Chun-Man, G. and Frazer, J.
year	2002
title	A Large-Scale Computing Infrastructure for Design Education
doi	https://doi.org/10.52842/conf.ecaade.2002.282
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 282-289
summary	Most departmental computing infrastructure reflects the state of networking technology and available funds at the time of construction, which converge in a preconceived notion of homogeneity of network architecture and usage patterns. The DMAN (Digital Media Access Network) project, a large-scale server and network foundation for The Hong Kong Polytechnic University’s School of Design, was created as a platform that would support a highly complex academic environment while giving maximum freedom to students, faculty and researchers through simplicity and ease of use. As a centralized multi-user computation backbone, DMAN faces an extremely heterogeneous user and application profile, exceeding implementation and maintenance challenges of typical enterprise, and even most academic server set-ups. This paper summarizes the specification, implementation and application of the system while describing its significance for design education in a computational context.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	c82f
authors	Chang, Yu-Li
year	2002
title	Exploring syntax and semantics of spatial structure - A study on Traditional Taiwanese City form in Chi’i’ng Dynasty
doi	https://doi.org/10.52842/conf.ecaade.2002.412
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 412-416
summary	Abstract. In this paper, we want to figure out the relations of complex semantics and syntax on five traditional Taiwanese cities in Chi’i’ng Dynasty by using a language approach. The issues of traditional Taiwanese central city in Chi’ing Dynasty had been interpreting by historical, social, and cultural research but had lacked the explicit construction of spatial structure on semantics-syntax. Therefore, we use a data modeling on knowledge level to describe the relationship between syntax and semantics. Through the research of Chi’ing Dynasty‘s history, we find out the spatial relations of Taiwanese traditional city to establish the functional categories of spatial structures. Then the language of semantics components and the meaning’s attributes are coded as logical statements to map the elements of syntax on architectural form, political vocabularies, spatial layout, and spatial myth. We argue that using this approach several social and spatial structures of cities can be clearly defined and understood.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	7f0a
authors	Chen, K.-Z.,Feng, X.-A. and Ding, L.
year	2002
title	Intelligent approaches for generating assembly drawings from 3-D computer models of mechanical products
source	Computer-Aided Design, Vol. 34 (5) (2002) pp. 347-355
summary	In order to reduce the time of mechanical product design and ensure the high quality of their assembly drawings, this paper develops an intelligent approach for generatingassembly drawings automatically from three-dimensional (3-D) computer assembly models of mechanical products by simulating the experienced human designer's thinkingmode with the aid of computer graphics and knowledge-based expert system. The key issues include the strategies and methods for selecting the necessary views in anassembly drawing, determining necessary sectional views in each view, eliminating the unreasonable projective overlap of the components in each view, and minimizing thenumbers of both the views in an assembly drawing and the sectional views in each view. Based on the approach, corresponding software prototype was developed. Finally, itis demonstrated, from an example of the fixture in a modularized drilling machine, that its assembly drawing was generated successfully using this intelligent softwareprototype.
keywords	CAD, Intelligent CAD, Expert System, Artificial Intelligence, Assembly, Drawing
series	journal paper
email
last changed	2003/05/15 21:33

_id	c840
authors	Cheung, S.-O., Tong, T.K.-L. and Tam, C.-M.
year	2001
title	Site pre-cast yard layout arrangement through genetic algorithms
source	Automation in Construction 11 (1) (2002) pp. 35-46
summary	The use of modular construction has gained wide acceptance in the housing sector. Standardized modular units are often pre-cast on site. The establishment of site pre-cast yard, in particular arranging the pre-cast facilities within the compound, presents real challenge to site management. This complex task is further aggregated with the involvement of several resources with different transport cost. A GA-model is developed for the search for a near optimal layout solution. The fitness function is to minimize the total transport cost for a pre-determined daily output. The use of the model is illustrated by an example. When compared with the best solution within the initial population, 18.45% reduction in cost for resources flow was achieved by the near optimal layout arrangement arrived at the 673rd trial. It is also suggested that the model can be extended to other layout problems such as warehouse and production line.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	2a84
authors	Donath, D. Hansen, St. and Richter, K.
year	2002
title	Architectural Window - Computer networks as planning and integration tools
doi	https://doi.org/10.52842/conf.ecaade.2002.302
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 302-305
summary	As building projects become increasingly more complex, the number of project participants increases as does their spatial distribution. An effective decentralised work process and co-operation is of increasing importance. The global computer network, the internet, has great potential and recent times have seen the development of a variety of techniques in this field. The project proposal described here is based upon this approach and also takes it a step further. A specific analysis of the subject and the subsequent identification of potential approaches formed the basis for an architectural application that brings the architect in contact with other project participants using the internet as a powerful yet simple and easy to use medium. The project is currently (2002) undergoing practice tests and academic investigation and is installed on a freely-accessible server.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	adf8
authors	Donath, D., Hansen, St. and Richter, K.
year	2002
title	Architectural Content System - ACS Internet Based Support for Architectural Planning Proceses
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 121-123
summary	As building projects become increasingly more complex, the number of project participants increases as does their spatial distribution. An effective decentralised work process and co-operation is of increasing importance. The global computer network, the internet, has great potential and recent times have seen the development of a variety of techniques in this field. The project proposal described here is based upon this approach and also takes it a step further. A specific analysis of the subject and the subsequent identification of potential approaches formed the basis for an architectural application that brings the architect in contact with other project participants using the internet as a powerful yet simple and easy to use medium.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	1df8
authors	Fedeski, M. and Sidawi, B.
year	2002
title	The Management of Internet Use, in UK Architectural Practices
doi	https://doi.org/10.52842/conf.acadia.2002.357
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 357-364
summary	The architectural profession has been slow to adopt new innovations in such areas as buildingtechnology, management, and CAD, as earlier research has shown. The Internet presents a particularchallenge. With even greater changes to the Internet expected in the near future, it is timely to ask howthe profession is adapting.Field research conducted by the author has found shortcomings in the way that architects use Internettechnology in the U.K. These involve the decisions to adopt the Internet, the management of its dailyuse, and forward planning for future adaptation. U.K. architects under-use the services available, andexperience problems with the services they do use. Their resultant dissatisfaction with what the Internetcan offer leads to a reluctance to adopt and use further Internet services.This paper discusses one aspect of that research, which is how architects are managing Internetresources in their practices. It argues that many of the difficulties that architects have are related topractice management. The paper presents these under the headings of the knowledge and attitude ofthe staff, and the decisions made by practice managers. The paper highlights features that needattention from practices and from the architects who guide them.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	ecaade2024_230
id	ecaade2024_230
authors	Fekar, Hugo; Novák, Jan; Míèa, Jakub; Žigmundová, Viktória; Suleimanova, Diana; Tsikoliya, Shota; Vasko, Imrich
year	2024
title	Fabrication with Residual Wood through Scanning Optimization and Robotic Milling
doi	https://doi.org/10.52842/conf.ecaade.2024.1.025
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 1, pp. 25–34
summary	The project deals with the use of residual wood of tree stumps and roots through scanning, optimization and robotic milling. Wood logging residue makes up to 50 percent of the trees harvested biomass. (Hakkila and Parikka 2002). Among prevailing strategies is leaving residue on site, and recovering residue for bioenergy. (Perlack and others 2005). The project explores the third strategy, using parts of the logging residue for fabrication, which may reduce the overall amount of wood logging volume. Furthermore approach aims for applying residue in its natural form and taking advantage of specific local characteristics of wood (Desch and Dinwoodie 1996). The project applies the strategy on working with stump and roots of an oak tree. Due to considerations of scale, available milling technics and available resources, chosen goal of the approach is to create a functioning chair prototype. Among the problems of the approach is the complex shape of the residue, uneven quality of wood, varying humidity and contamination with soil. After cleaning and drying, the stump is scanned and a 3D model is created. The 3D model od a stump is confronted with a 3D modelled limits of the goal typology (height, width, length, sitting surface area and overal volume of a chair) and topological optimization algorithm is used to iteratively reach the desired geometry. Unlike in established topological optimization proces, which aims for a minimal volume, the project attempts to achieve required qualities with removing minimal amount of wood. Due to geometric complexity of both stump and goal object, milling with an 6axis industrial robotic arm and a rotary table was chosen as a fabrication method. The object was clamped to the board (then connected to a rotary table) in order to provide precise location and orientation in 3D space. The milling of the object was divided in two parts, with the seating area milled in higher detail. Overall process of working with a residual wood that has potential to be both effective and present aesthetic quality based on individual characteristics of wood. Further development can integrate a generative tool which would streamline the design and fabrication proces further.
keywords	Robotic arm milling, Scanning, Residual wood
series	eCAADe
email
last changed	2024/11/17 22:05

_id	1a42
authors	Fjeld, M., Lauche, K., Bichsel, M., Voorhorst, F., Krueger, H., Rauterberg, M.
year	2002
title	Physical and Virtual Tools: Activity Theory Applied to the Design of Groupware
source	Computer Supported Cooperative Work (CSCW), Kluwer
summary	Activity theory is based on the concept of tools mediating between subjects and objects. In this theory, an individual's creative interaction with his or her surroundings can result in the production of tools. When an individual's mental processes are exteriorized in the form of tools - termed objectification - they become more accessible to other people and are therefore useful for social interaction. This paper shows how our understanding of activity theory has shaped our design philosophy for groupware and how we have applied it. Our design philosophy and practice is exemplified by a description of the BUILD-IT system. This is an Augmented Reality system we developed to enhance group work; it is a kind of graspable groupware which supports cooperative planning. The system allows a group of people, co-located around a table, to interact, by means of physical bricks, with models in a virtual three-dimensional (3D) setting. Guided by task analysis, a set of specific tools for different 3D planning and configuration tasks was implemented as part of this system. We investigate both physical and virtual tools. These tools allow users to adjust model height, viewpoint, and scale of the virtual setting. Finally, our design practice is summarized in a set of design guidelines. Based on these guidelines, we reflect on our own design practice and the usefulness of activity theory for design.
series	other
last changed	2003/04/23 15:50

_id	ddssup0207
id	ddssup0207
authors	Geurts, K., Wets, G., Brijs, T. and Vanhoof, K.
year	2002
title	The Use of Rule-Based Knowledge Discovery Techniques to Profile Black Spots
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	In Belgium, traffic safety is currently one of the highest topics on the list of priorities of the government. The identification of black spots and black zones and profiling them in terms of accident related data and location characteristics must provide new insights into the complexity and causes of road accidents which, in turn, provide valuable input for government actions. Data mining is the extraction of information from large amounts of data. The use of data mining algorithms is therefore particularly useful in the context of large datasets on road accidents. In this paper, association rules are used to identify accident circumstances that frequently occur together. The strength of this descriptive approach lies within the definition of different accident types and the identification of relevantvariables that make a strong contribution towards a better understanding of accident circumstances. An analysis of the produced set of rules, describing underlying patterns in the data, indicates that fiveaspects of traffic accidents can be discerned: collision with a pedestrian, collision in parallel, sideways collision, week/weekend accidents and weather conditions. For each of these accident types, different variables play an important role in the occurrence of the accidents.
series	DDSS
type	normal paper
last changed	2008/11/01 07:38

_id	bca4
authors	Glaser, D., Warfield, R., Carrier, K., Lam, A., Yong, Y.,Canny, J., Ubbelohde, M. and Do, E.
year	2002
title	Multi-Resolution Sky Visualization: Daylight Design and Design Tools
doi	https://doi.org/10.52842/conf.acadia.2002.251
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 251-261
summary	This paper describes how building designers make sense of the sky and modern visualizationtechniques for representing them. The dialectic approach addresses technological innovation withrespect to existing social practices. This is done for two reasons—to illustrate where practices are andhow they can be extended with innovative technologies. It is shown that building designers maintainvarious levels of expertise for managing daylight design. Visualization prototypes are introduced alsowith different degrees of precision. The paper concludes with implications for the development ofdesign tools and use by building designers.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

For more results click below: