Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2643

Reformat results as: short short into frame detailed detailed into frame

_id	ddssup0201
id	ddssup0201
authors	Alexiou, K. and Zamenopoulos, T.
year	2002
title	Artificial Design and Planning Support: Interactive Plan Generation andCoordination in Distributed Decision-Making
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	In this paper we discuss some basic issues pertaining to artificial plan design as a paradigm for architectural design and urban planning support. We present a model for artificial design generation based on learning control methodologies. Plan design is seen as a search for "coordinated" solutions (changes) that satisfy distributed domain requirements and views expressed by human or artificial agents. Learning control is used as a method to search for solutions that direct partial descriptionsproduced by agents, to follow their dynamically defined targets -despite conflicting requirements. The model is simulated for land use and layout plan design, involving decisions for the location and physical configuration of a hypothetical housing and retail development.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssup0205
id	ddssup0205
authors	Deguchi, A., Tabira, Y., Matsuura, H., Nakano, H. and Arima, T.
year	2002
title	Integration System of Archaeological and Geographical Informationfor Planning in Historical Regions
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	This study aims to construct the GIS for supporting the planning process and archaeological analysis in the historical regions by integrating geographical data and archaeological data on the sites with ruinsand remains in various period from ancient through medieval which had been buried and was recently excavated in geologic layers and mounds. First, for understanding the trends of environmental condition the excavated sites, we analyze the relationship between the site location and the condition ofgeography and natural environment by using the constructed system.Secondary, we develop the system to make it possible to browse and operate the information on the GIS through the internet. This web GIS constructed by us supports sharing the information on planning for preservation of historical sites among city planners, archaeologists and citizens, and serve as a tool for the collaboration and the coordination of urban development and historical preservation. Finally, as the application with the GIS, we show the results of case studies and point out the merits and effects about usage of the GIS for archaeological analysis as well as learning the local history.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssup0207
id	ddssup0207
authors	Geurts, K., Wets, G., Brijs, T. and Vanhoof, K.
year	2002
title	The Use of Rule-Based Knowledge Discovery Techniques to Profile Black Spots
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	In Belgium, traffic safety is currently one of the highest topics on the list of priorities of the government. The identification of black spots and black zones and profiling them in terms of accident related data and location characteristics must provide new insights into the complexity and causes of road accidents which, in turn, provide valuable input for government actions. Data mining is the extraction of information from large amounts of data. The use of data mining algorithms is therefore particularly useful in the context of large datasets on road accidents. In this paper, association rules are used to identify accident circumstances that frequently occur together. The strength of this descriptive approach lies within the definition of different accident types and the identification of relevantvariables that make a strong contribution towards a better understanding of accident circumstances. An analysis of the produced set of rules, describing underlying patterns in the data, indicates that fiveaspects of traffic accidents can be discerned: collision with a pedestrian, collision in parallel, sideways collision, week/weekend accidents and weather conditions. For each of these accident types, different variables play an important role in the occurrence of the accidents.
series	DDSS
type	normal paper
last changed	2008/11/01 07:38

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	6f10
authors	Petric, J., Maver, T.W., Conti, G. and Ucelli, G.
year	2002
title	Virtual Reality in the Service of User Participation
source	Distributing Knowledge in Building. Proceedings of CIB W78 Conference (Ed. K Agger et al), Aarhus, 217-224
summary	The normal application of Virtual Reality is to the simulation of environments which are in some way special - remote, hazardous or purely imaginary. This paper describes research and development work which changes the paradigm by simulating perfectly ordinary buildings for special people. Some of the population have some form of physical impairment - a proportion which is likely to rise in line with an ageing population. New legislation, such as the UK Disability Discrimination Act places additional responsibility on building owners to ensure adequate access for people with an impairment and this in turn will place additional responsibility on the architect. Current methods of auditing access for new building are primitive and require the auditor to interpret plans/sections of the proposed building against a checklist of requirements specific to the special need. This paper reports on progress in the use of an immersive VR facility to simulate access to buildings for two broad classes of user: i) those with a mobility impairment ii) those with a visual impairment In the former case, a wheelchair motion platform has been designed which allows the wheelchair user to navigate the virtual building; a brake and motor connected to the rollers on which the wheelchair sits facilitate the effects of slope and surface resistance.
series	other
type	normal paper
email
last changed	2015/02/20 11:24

_id	bff9
authors	Proctor, George (Ed.)
year	2002
title	ACADIA 2002 [Conference Proceedings]
doi	https://doi.org/10.52842/conf.acadia.2002
source	Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X / Pomona (California) 24-27 October 2002, 446 p.
summary	The 2002 ACADIA conference finds digital tec_nology ubiquitous as the Association for Computer Aided Design in Architecture moves into its third decade. The organization of ACADIA is on the threshold of restating its mission. After 20 years, many of the organization’s initial objectives have been achieved. ACADIA members have been instrumental in the development of design software, and in bringing computers and digital technology into architectural practice and design school curriculum. At first, ACADIAns faced the debate over the appropriateness and utility of digital technology in the disciplines of architecture, planning and building science. Today the use of computers and information technology is widely accepted by architects and CAAD and digital technology have brought profound change to design practice. The debate in ACADIA has long since moved from "should we use this technology" to "how", "for what" and "why". Now that many practitioners, learning institutions and professional organizations have taken up the call, ACADIA must restate its mission, if it wishes to remain “distinct”. This does not mean that the work of ACADIA is complete. Much remains to be done and much more needs to be improved. ACADIA’s Mission Statement places particular focus on “education and the software, hardware and pedagogy involved in education.” And “(t)he organization is also committed to the research and development of computer aides that enhance design creativity, and that aim at contributing to the construction of humane physical environments.” These are the areas that continue to evolve, grow and provide for ACADIA’s continued relevance. The ACADIA 2002 conference theme reflects the state of digital technology’s application to the discipline, as much as it refers to ACADIA’s future. With the general acceptance of digital technology and CAAD, we have arrived at a place where the work of great interest and relevance lies in the space between what is digital and what is analog. The environments of real space and cyberspace have in a very short time become so intertwined that the space between real and virtual (not to be confused with reality and fantasy) is becoming indistinguishable. You cannot eat, travel, use public utilities, bank, shop, vacation or recreate without at the very least coming into contact with or passing through information space. The landscape between these two environments has become a cultural phenomenon for those societies with access to the Internet and information networks. And while the computer and World Wide Web have empowered individuals, the collective impact of the technology holds all the potential and problems that similarly emerged in other technology induced landscapes. Consider this last point in the context of ACADIA’s stated mission to “enhance design creativity while contributing to the construction of humane physical environments.” And you can see why many of the 260 initial submissions to this conference were in the area of design artifacts and design methodology, providing evidence that ACADIA’s mission remains relevant and in accord with the trends of research and professional creative activity.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	ddssup0216
id	ddssup0216
authors	Saarloos, D.J.M., Arentze, T.A., Borgers, A.W.J. and Timmermans, H.J.P.
year	2002
title	Towards a Local Planning Support System,Introducing the MASQUE Framework
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	Urban planning is an important instrument for improving the quality of life, but it is hampered by the fact that the effects of many decisions, to be made by the planner, are practically unknown or at best unclear. The high level of complexity, uncertainty and subjectivity involved in urban plan development is seriously troubling the planner. One way of facilitating the plan development process, and potentially improving the decision-making, is developing a Planning Support System (PSS) that combines artificialintelligence with a gamut of computational tools that support the process. At the Eindhoven University of Technology a research program is conducted to develop such a system for local urban planning in the Netherlands. The system, named MASQUE (Multi-Agent System for supporting the Quest forUrban Excellence), applies Multi-Agent technology to incorporate multidisciplinary expertise on both tools and domains as well as to enable intelligent guidance and assistance towards the user. Strong emphasis is put on the scenario-based way of working that is common in urban planning. This paper puts forward the difficulties faced in local planning practice and discusses the possibilities for computer-assistance. This finally resolves into the introduction of the MASQUE framework, describing how the system is organized and how the agents will be involved.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar0201
id	ddssar0201
authors	Achten, H.H.
year	2002
title	Requirements for Collaborative Design in Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	The concept of collaborative design has recently come under renewed attention in the field of computer aided architectural design support. Although collaborative design deals with the same aspects of cooperation by various participants in the design process as previously studiedin, for example, concurrent engineering and multi-disciplinary design, it nevertheless puts a different research emphasis. Collaborative design looks at how the process can be improved in such a way that collaboration –working together in a manner to enhance each participants contribution to the design– emerges from the process. In engineering design practice, thismeans a shift forward in the design process where engineers are asked earlier for their input in the design solution. For CAAD research, the phenomenon of collaborative design poses the question how design tools and environments can be made in such a way that collaboration will occur. In this paper, the aims is to describe the concept of collaborative design in architecture, and to give an outline of the perceived requirements in the organisation of design and Computer Aided Design Support to achieve collaborative design.
series	DDSS
last changed	2003/11/21 15:15

_id	9c41
authors	Ahmad Rafi, M.E., Chee W.K., Mai, N., Ken, T.-K. N. and Sharifah Nur, A.S.A. (Eds.)
year	2002
title	CAADRIA 2002 [Conference Proceedings]
doi	https://doi.org/10.52842/conf.caadria.2002.
source	Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X / Cyberjaya (Malaysia) 18–20 April 2002, 370 p.
summary	Evolution of trends in the realm of computer aided architectural design (CAAD) has seen the convergence of technologies – complementing traditional tools with emerging sciences like Information Technology (IT) and multimedia applications. This appliqué of technologies has not just expanded the scope and enhanced the realm of CAAD research and practice, but is also breaking new frontiers. This creative nexus will be realised at the 7th International Conference on Computer Aided Architectural Design Research In Asia (CAADRIA 2002) to be held at the Faculty of Creative Multimedia, Multimedia University, Malaysia, between 18th-20th April, 2002. CAADRIA 2002’s theme, "Redefining Content", seeks to recognise and infuse these emerging components in the field of architecture and design with a holistic approach towards online, digital and interactive systems. The 41 papers compiled were selected through a blind review process conducted by an international review panel. To reflect the multi-disciplinary nature of this year's conference, the chapters are arranged topically to facilitate the in-depth study of key components. The component sessions include: // Web Design, Database and Networks // CAD, Modelling and Tools // Collaborative Design, Creative Design and Case Reasoning // Simulation and Prototyping // Virtual Environment and Knowledge Management // Design Education, Teaching and Learning /// We believe that this specialised approach will provide a deeper and more illuminating feel of the various components and their critical convergence in the field of architecture and design.
series	CAADRIA
email
more	www.caadria.org
last changed	2022/06/07 07:54

_id	ddssar0202
id	ddssar0202
authors	Akin, Ömer and Özkaya, Ipek
year	2002
title	Models of Design Requirement
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Case studies show that significant proportions of design errors and failures are linked to poor requirement specification during both early stages of design and as changes occur. Computational requirements engineering as a front-end to design iterations is a promising area addressing theseproblems. In other design disciplines, such as in software engineering, requirement engineering has given significant product improvements. In this paper, we present a state-space representation of requirement models for architectural design. The purpose of requirement modeling in design is tocreate a process by which requirements can be converted into working design solutions through frontend validation. We suggest three models of requirement specification, co-evolutionary [CoM], multiple domain [MDM] and single domain [SDM] models, that can facilitate this effort. Taken together all three models provide a full set of logical permutations of requirement-solution “worlds” and “operations.” We compare each model against the others in terms of facilitating change management and computability.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssar0214
id	ddssar0214
authors	Al Hassan, F., Trum, H.M.G.J. and Rutten, P.G.S.
year	2002
title	Strategic Briefing A Conceptual Process Model for Building Design
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Nowadays building design problems are divided in partial discipline related sub-problems. Through targeted and focused attention to sub problems however the awareness of the whole is lost. Each designparticipant gives his sub-problem first priority. In contrast in the past the master builder saw the whole problem as his problem first. Thus the process of seeing the design problem as a whole, as a result ofprioritizing, considering constraints, or strategizing, is lost in today’s practice, basically because this process is a mental and implicit process, that occurred in the brain of the multi-disciplinary master builder.In most cases it is the task of no one in a design team today. The aim of this paper is modeling this conceptual mental implicit process design using System Theory and Cognitive Psychology, trying to determine the structure of the design problem as it occurs intuitively in the brain. The result will provide us with a mechanism that enables us each time to refine a unique common design problem representation. This leads to more effective use of design team capabilities, and forms an essential basis for organizing efforts toward collaborative solutions. Also some kind of clarity is provided as to how proposed solutions are to be judged.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssar0203
id	ddssar0203
authors	Alkass, Sabah and Jrade, Ahmad
year	2002
title	A Web-Based Virtual Reality Model for Preliminary Estimates of Hi-Rise Building Projects
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Cost estimating of a construction project at its early stage is considered to be very important task since it will be used as a base to commit or otherwise not to commit funds to that project. Preparation of a reliableand realistic preliminary estimate to aid the decision makers to commit funds for a specific project is a complicated assignment. Traditional methods and operations produced unsatisfactory aid due to lack ofaccuracy especially in the pre-design stage of a project. This participates in the increase of percentage of bankruptcy in the construction industry, which has dramatically climbed up and ranked as 15 percent of thewhole bankruptcies claimed in Canada (Statistic Canada 1998). This paper presents a methodology for developing and a Web-based model to automate preliminary cost estimates for hi-rise buildings. This is achieved by integrating a database with design drawings in a Virtual Reality (VR) environment. The model will automatically generate preliminary estimates after modifying a 3D CAD drawing. It provides the user the option to visualize and simulate the drawing and its cost data through VR environment. Having done that, it will allow owners, architects and cost engineers to view a constructed building project, change its geometric objects and shapes, and accordingly generate a new conceptual cost estimate.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssup0202
id	ddssup0202
authors	Antoni, J.P.
year	2002
title	Urban Sprawl Modelling: Combining Models to Make Decision
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	Urban sprawl is frequently associated with the idea of an unsuitable development, leading to increasing economic, social and environmental problems. Moreover, its control is difficult because multiple patterns (concerning numerous traditional urban planning fields) overlap. In order to understand the sprawl process and to manage its consequences, it must be simplified. The construction of a decision making tool appears then interesting. The GIS-based tool presented here is being developed incollaboration between the urban planning agency of Belfort and the laboratory of geography of Strasbourg. It requires three steps: 1. quantification of the sprawl (how much areas are involved in theurban sprawl process?); 2. location of the sprawl (where are the areas defined in the first step?); 3. differentiation of the sprawl (what are the areas located in the second step?). Of course, the successionof the three stages makes the use of the complete model more complex. So, a global ergonomic user interface is being developed within the GIS, allowing to modify each parameter and to play easily numerous simulations.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssar0204
id	ddssar0204
authors	Asanowicz, A.
year	2002
title	Evolution of Media for Early Design Stages
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In this paper the evolution of media used at early design stages will be considered. In traditional methods of searching and presenting the design idea, the basic tool used was the graphic representation. Implementation of new digital techniques in 60s - 70s focused on the mathematical way ofrepresentation. These methods were “not architect friendly” (lack of graphic representation traditionally used by architects). As a result, the development of methods for digital support of form searching was terminated. The computer was used as a tool for drafting. Creative usage of computers for form searching through sketching on the display was extremely difficult. The computer could be described as an “incompatible pencil”. Only in recent years can we see new efforts in this area ofdesign methodology. Thanks to new technical possibilities we have a new chance for changing the process of designing. New kinds of software and hardware let us use the computer not as a pen, but as a medium. In this paper different new ways of form searching will be considered (from very simple method as the scansketches to very complicated ones, such as the generic algorithms). At the end, the influence of new media on the process of design will be presented.
series	DDSS
last changed	2003/11/21 15:16

_id	ddssar0205
id	ddssar0205
authors	Batara, A., Dave, B. and Bishop, I.
year	2002
title	Design Decision Support through Translation between Multiple Representations of Spatial Data
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Urban planning and urban design involve collaboration of diverse participants with multiple agendas and multiple criteria. The participants typically use multiple representations of spatial data to derive inferences and insights about the planning problems, leading to a shared decision-making process. To support such multidisciplinary work, this paper proposes a new computational approach and technique for translation between multiple representations of spatial data. This approach is designed to supportdesign decision-making in the interrelated interests of design participants. Prototype implementation and evaluation are conducted to test and validate the proposals.
series	DDSS
last changed	2003/11/21 15:16

_id	ddssar0206
id	ddssar0206
authors	Bax, M.F.Th. and Trum, H.M.G.J.
year	2002
title	Faculties of Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In order to be inscribed in the European Architect’s register the study program leading to the diploma ‘Architect’ has to meet the criteria of the EC Architect’s Directive (1985). The criteria are enumerated in 11 principles of Article 3 of the Directive. The Advisory Committee, established by the European Council got the task to examine such diplomas in the case some doubts are raised by other Member States. To carry out this task a matrix was designed, as an independent interpreting framework that mediates between the principles of Article 3 and the actual study program of a faculty. Such a tool was needed because of inconsistencies in the list of principles, differences between linguistic versions ofthe Directive, and quantification problems with time, devoted to the principles in the study programs. The core of the matrix, its headings, is a categorisation of the principles on a higher level of abstractionin the form of a taxonomy of domains and corresponding concepts. Filling in the matrix means that each study element of the study programs is analysed according to their content in terms of domains; thesummation of study time devoted to the various domains results in a so-called ‘profile of a faculty’. Judgement of that profile takes place by committee of peers. The domains of the taxonomy are intrinsically the same as the concepts and categories, needed for the description of an architectural design object: the faculties of architecture. This correspondence relates the taxonomy to the field of design theory and philosophy. The taxonomy is an application of Domain theory. This theory,developed by the authors since 1977, takes as a view that the architectural object only can be described fully as an integration of all types of domains. The theory supports the idea of a participatory andinterdisciplinary approach to design, which proved to be awarding both from a scientific and a social point of view. All types of domains have in common that they are measured in three dimensions: form, function and process, connecting the material aspects of the object with its social and proceduralaspects. In the taxonomy the function dimension is emphasised. It will be argued in the paper that the taxonomy is a categorisation following the pragmatistic philosophy of Charles Sanders Peirce. It will bedemonstrated as well that the taxonomy is easy to handle by giving examples of its application in various countries in the last 5 years. The taxonomy proved to be an adequate tool for judgement ofstudy programs and their subsequent improvement, as constituted by the faculties of a Faculty of Architecture. The matrix is described as the result of theoretical reflection and practical application of a matrix, already in use since 1995. The major improvement of the matrix is its direct connection with Peirce’s universal categories and the self-explanatory character of its structure. The connection with Peirce’s categories gave the matrix a more universal character, which enables application in other fieldswhere the term ‘architecture’ is used as a metaphor for artefacts.
series	DDSS
last changed	2003/11/21 15:16

_id	6d22
authors	Bermudez, J., Agutter, J., Syroid, N., Lilly, B., Sharir, Y., Lopez, T., Westenskow, D. and Foresti, S.
year	2002
title	Interfacing Virtual & Physical Spaces through the Body: The cyberPRINT Project
doi	https://doi.org/10.52842/conf.acadia.2002.395
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 395-400
summary	The cyberPRINT is a fully immersive, interactive virtual environment that is being generated in rea-timebased on physiological data readings of a human body. In other words, the cyberPRINT is based oncreating interfaces between physical and digital spaces and between biology and informationtechnologies. The cyberPRINT is also an event, wherein a performer is connected to the cyberPRINTgenerator to create a self-sustaining feedback mechanism. Although using the body to electronicallydrive music and media events is not new, most of these works have paid little or no attention to thepotential of interactive 3D virtual environments. Nor have they been so technologically advanced,interdisciplinary intensive (involving architecture, choreography, modern dance, music, bioengineering,medicine and computer science), or architecturally focused as the cyberPRINT.This project covers a wide and fertile territory that goes from the very technical and design oriented tothe very theoretical and interdisciplinary. This paper is intended to (1) expand what has been alreadypublished about this project (Bermudez et al 2000a) and (2) establish potential areas for discussionbefore and after the performance
series	ACADIA
email
last changed	2022/06/07 07:52

_id	acadia07_174
id	acadia07_174
authors	Bontemps, Arnaud; Potvin, André; Demers, Claude
year	2007
title	The Dynamics of Physical Ambiences
doi	https://doi.org/10.52842/conf.acadia.2007.174
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 174-181
summary	This research proposes to support the reading of physical ambiences by the development of a representational technique which compiles, in a numerical interface, two types of data: sensory and filmic. These data are recorded through the use of a portable array equipped with sensors (Potvin 1997, 2002, 2004) as well as the acquisition of Video information of the moving environment. The compilation of information is carried out through a multi-media approach, by means of a program converting the environmental data into dynamic diagrams, as well as the creation of an interactive interface allowing a possible diffusion on the Web. This technique, named APMAP/Video, makes it possible to read out simultaneously spatial and environmental diversity. It is demonstrated through surveys taken at various seasons and time of the day at the new Caisse de dépôt et de placement headquarters in Montreal which is also the corpus for a SSHRC (Social Sciences and Humanities Research Council) research grant on Environmental Adaptability in Architecture (Potvin et al. 2003-2007). This case study shows that the technique can prove of great relevance for POEs (Post Occupancy Evaluation) as well as for assistance in a new design project.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ddssup0204
id	ddssup0204
authors	Caratù, G., Concilio, G. and Monno, V.
year	2002
title	Structuring Lay Knowledge in a GI Perspective: Problems and Pitfall
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	The present contribution, starting from some considerations developed in environmental planning domain, discusses the representation of lay knowledge in a GIS environment. Two paths of exploration in dealing with representational problems are sketched. The first is concerned with the structuring of an acquired cognitive base and, the other is about the implementation of cognitive routines. In particular the structuring process of a lay cognitive base is discussed starting from recent developments in GIS technologies and information theories. Difficulties and pitfalls, which arouse during a case study related to an environmental planning experience being carried on for a national natural park, are presented. The experimentation work is discussed also in relation with a preliminary attempt of outputs validation carried out with people who, in a preliminary stage, were interviewed in order to acquire lay knowledge.
series	DDSS
last changed	2003/08/07 16:36

_id	c229
authors	Cavazos, María Estela Sánchez
year	2002
title	Experiencia en Digitalización de Procesos de Diseño Arquitectónico Caso Taller de Modelación Espacial, Universidad Autónoma de Aguascalientes [Experience in Digitalization Processes of Architectural Design: Study Case of Space Modeling, Independent University of Aguascalientes ]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 252-256
summary	This project has been based in an experience that took time in the years 1999 and 2000 where a group of 13 students of the Architectonic Design Masters in the U.A.A. were submitted to a project that consisted in register their Architectonic Design Processing during a year with the main purpose of having the most complete material possible to be used as material for different research projects. At the end of the architectonic project the students scanned all the graphics and ordered them in the format that was established by the group using ACDSee32 as the program, which resulted very simple to manage and permitted to order the graphics and write comments to them as it was thought. The result obtained was 12 ordered texts by seven segments pefectly identifi ed and with easy manage for any investigation that you want to realice with them, in fact today exist two fi nished investigations that were realized with this information added to one formal investigation and some informal in process.
series	SIGRADI
email
last changed	2016/03/10 09:48

For more results click below: