Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 16547

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2023_91
id	sigradi2023_91
authors	Mariano, Pedro Oscar Pizzetti, Silva, Felipe Bruno Lima de, Sônego, Yasmin Silva Sônego, Vaz, Carlos Eduardo Verzola and Cuperschmid, Ana Regina Mizrahy
year	2023
title	A Low-cost Sensor for Slope and Risk Areas Monitoring: Using a Digital Twin for Landslide Prevention
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1443–1454
summary	The objective of this research is to create a prototype of a low-cost remote sensing system for capturing data in slope areas at risk of landslides or movement to monitor and prevent disasters caused by landslides and enable remote monitoring in informal settlements. Therefore, the collected data can be used as a management tool by the government and citizens, also through a prototype of a digital twin. For the development, the following steps were considered: (1) data collection on the digital twins, software, and hardware needed to build the device; (2) sensor development through open-source electronic platforms; and (3) conducting tests to identify sensor improvements and programs. Through the sensor prototype, it became possible to collect landslide data on-site, thus revealing a direct alignment between real-world observations and the data collected by the sensor.
keywords	Sensors, Digital twin, Parametric modeling, Landslide monitoring, Disaster mitigation
series	SIGraDi
email
last changed	2024/03/08 14:08

_id	sigradi2020_534
id	sigradi2020_534
authors	Mariano, Pedro Oscar Pizzetti; Fonseca, Raphaela Walger da; Pereira, Fernando Oscar Ruttkay; Pereira, Alice Theresinha Cybis
year	2020
title	Autonomous parametric process for daylight simulation applied to the proposal of a daylighting of buildings performance tool
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 534-540
summary	The openings features definition, considering the obstructions influence caused by the urban environment, are extremely relevant for the daylit buildings design. The complexity of the daylight phenomenon and the need to estimate its performance spread the use of parametric simulation and simulation programs. Thus, this article aims to create a parametric process, derived from a digital process, capable of simulating and registering the performance of daytime construction in different urban scenarios in an automated way. This process made it possible to generate a series of data capable of producing tools for understanding the phenomenon of natural daylight.
keywords	Parametric process, Simulation, Daylighting, Building performance
series	SIGraDi
email
last changed	2021/07/16 11:52

_id	sigradi2020_143
id	sigradi2020_143
authors	Mariano, Pedro Oscar Pizzetti; Pereira, Alice Theresinha Cybis
year	2020
title	Parametric Design Process of Facade Elements with Characteristics of Fractal Geometry: Development, Evaluation and Application
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 143-148
summary	This article deals with the use of the characteristics of fractal linear geometry and the different knowledge related to the application of its patterns in architectural elements, considering their compositional potentialities. For this, a theoretical and practical trajectory was developed, such as understanding the characteristics of fractal geometry and the existing software and methods for its reproduction. As a result, a parametric process was developed that allows to recreate fractal patterns in architectural elements, making it possible to identify the necessary steps for their elaboration, identifying the potentialities of their use and the skills necessary to reproduce similar parametric processes.
keywords	Fractal geometry, Dimension D, Parametric process, Design Process
series	SIGraDi
email
last changed	2021/07/16 11:48

_id	sigradi2022_85
id	sigradi2022_85
authors	Mariano, Pedro Oscar Pizzetti; Sansao, Marcos Marciel; Vaz, Carlos Eduardo Verzola
year	2022
title	Parametric modeling applied to landscape design: simulation as a tool for defining tree stratum
source	Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 225–236
summary	This experiment demonstrated how the use of a process aided with computational tools, similar to the multi-criteria performative model, contributes to the learning of architecture and urbanism students in the development of designing urban and landscape projects. The study seeks to bring students closer to multi-criteria analysis in project training activities. The method used is guided by a case study that allows simulated data referring to radiation, visual permeability, and percentage of visible sky. The results were collected through the analyzes and comparisons found in the final project of the discipline, verified through the observation of the design decisions based on the simulations. This allowed us to identify the potentialities of the process in the understanding of the students in using different criteria in the initial launch of the architectural project and also to recognize the points and negatives of the use of the process.
keywords	Parametric Analysis, Simulation, Multicriteria Analysis, Landscape Design
series	SIGraDi
email
last changed	2023/05/16 16:55

_id	ecaade2014_009
id	ecaade2014_009
authors	Marie Davidova, Martin Šichman and Martin Gsandtner
year	2014
title	Material Performance of Solid Wood:Paresite, The Environmental Summer Pavilion
doi	https://doi.org/10.52842/conf.ecaade.2014.2.139
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 139-144
summary	The Paresite - The Environmental Summer Pavilion designed for reSITE festival, is a möbius shaped structure, built from torsed pine wood planks in triangular grid with half cm thin pine wood triangular sheets that provide shadow and evaporate moisture in dry weather. The sheets, cut in a tangential section, interact with humidity by warping themselves, allowing air circulation for the evaporation in arid conditions. The design was accomplished in Grasshopper for Rhino in combination with Rhino and afterwards digitally fabricated. This interdisciplinary project involved students from the Architectural Institute in Prague (ARCHIP) and the students of the Faculty of Forestry and Wood Sciences at the Czech University of Life Sciences Prague (FLD CZU). The goal was to design and build a pavilion from a solid pine wood in order to analyse its material properties and reactions to the environment and to accommodate functions for reSITE festival. The design was prepared within half term studio course and completed in June 2013 on Karlovo Square in Prague where it hosted1600 visitors during festival weekend.
wos	WOS:000361385100014
keywords	Material performance; solid wood; wood - humidity interaction
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2017_087
id	ecaade2017_087
authors	Marijnissen, Marjolein P.A.M. and van der Zee, Aant
year	2017
title	3D Concrete Printing in Architecture - A research on the potential benefits of 3D Concrete Printing in Architecture
doi	https://doi.org/10.52842/conf.ecaade.2017.2.299
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 299-308
summary	This research explores the use of large-scale 3D Printing techniques in architecture and structural design. First we will analyse the various methods in large-scale 3D printing in order to choose the method with the most potential to be used to build large-scale residential buildings in the Netherlands. Then we will investigate the properties of this 3D printing technique to determine the new building process, related to building with a 3D Concrete Printer. The freedom in movement of the printer and the properties of the concrete mixture used to print will form the guidelines in the creation of a design language in which both material costs and labour costs are reduced to a minimum. The design language is later applied on the design of a house, which shows the impact 3D Concrete Printing should have on the current boundaries in architecture and structural design.
keywords	Additive Manufacturing; 3D Concrete Printing; Structural Optimization; Personalization
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ddss2008-40
id	ddss2008-40
authors	Marin, Ph.; J.C. Bignon, H. Lequay
year	2008
title	Integral evolutionary design, integrated to early stageof architectural design processGenerative exploration of architectural envelope responding tosolar passive qualities
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper tackles the exploration of generative digital tools in the field of architectural design. Evolutionary mechanisms are expected to help the designer and to support his creativity. Our purpose is to implement a digital tool based on a genetic algorithm, which uses environmental parameters and human interplay to evolve an architectural form. The analysis of design processes and CAD use lead us to mark a transformation of design process at a cognitive level.
keywords	Genetic algorithm, generative architectural design process, environmental parameters
series	DDSS
last changed	2008/09/01 17:06

_id	ecaade2012_136
id	ecaade2012_136
authors	Marin, Philippe ; Marsault, Xavier ; Saleri, Renato ; Duchanois, Gilles
year	2012
title	Creativity with the help of evolutionary design tool
doi	https://doi.org/10.52842/conf.ecaade.2012.1.319
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 319-327
summary	The general thematic of our work tackles the question of the generative design tool efficiency to stimulate a creative architectural conception in the context of sustainable development. We focus our point of view on the conceptual research phases. We would like to characterise the human creative mechanisms in a situation of generative assistance where digital tool reveals some degree of autonomy and incorporates environmental constraints. Thus, we implement an evolutionary design tool in which energetic performances of the analogon are used in order to orient the evolution. Our tool is based on an interactive genetic algorithm that ensures both a broad exploration of the solutions space and the subjective user preferences accounting. Users groups were confronted to the tool in a conception situation and creativity was evaluated and characterized.
wos	WOS:000330322400032
keywords	Interactive genetic algorithm; evolutionary design; creativity; environmental parameters
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2008_006
id	ecaade2008_006
authors	Marin, Philippe; Bignon, Jean-Claude; Lequay, Hervé
year	2008
title	Integral Evolutionary Design, Integrated to Early Stage of Architectural
doi	https://doi.org/10.52842/conf.ecaade.2008.019
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 19-26
summary	This paper deals with the architectural design process and the digital tools able to support a creative activity. Evolutionary devices are expected to support the architect in the initial phase of his work in progress and to stimulate his creativity through analogical thinking. An experimental tool is described, this one is using a genetic algorithm to explore the solution space, and it is based on both solar passive qualities and subjective interaction.
keywords	Architectural design process, evolutionary design, genetic algorithm, analogical thinking, environmental parameters
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2015_201
id	ecaade2015_201
authors	Marin, Philippe; Blanchi, Yann and Janda, Marian
year	2015
title	Cost Analysis and Data Based Design for Supporting Programmatic Phase
doi	https://doi.org/10.52842/conf.ecaade.2015.1.613
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 613-618
summary	Our paper presents research on the development of technologies and methodologies to support preliminary design phases through data based modelling. A digital parametric model informs costs evaluations and supports iterative and visual space exploration solutions. Thanks to associative modelling, the architectural conception is renewed and digital tools support design decision-making in a creative way. We propose to make project cost a design parameter through an interactive handling of a 3D geometric model that is relevant to strategic architectural intentions. In our experimentation, cost calculation spreadsheets are linked to a parametric models. An initial substructure of the building cost is defined based on the architectural concepts. The parametric tool directly informs the evaluation spreadsheet and a real time cost analysis is afforded to the designer. The tool supports the design process by displaying immediate feed back to the designer who can consider and control the financial implications of his hypothesis.
wos	WOS:000372317300066
series	eCAADe
email
last changed	2022/06/07 07:59

_id	acadia08_332
id	acadia08_332
authors	Marin, Philippe; Jean-Claude Bignon ;Hervé Lequay
year	2008
title	A Genetic Algorithm for Use in Creative Design Processes
doi	https://doi.org/10.52842/conf.acadia.2008.332
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 332-339
summary	This paper deals with natural growth mechanisms applied to architectural design processes. We implement a genetic algorithm as part of a digital tool to be used in the creative design process. This evolutionary process is evaluated by means of environmental parameters, passive solar qualities and the designer’s individual requirements. A morphogenetic process is put forward, based on a “metamorphosis strategy”.
keywords	Algorithm; Analysis; Environment; Genetic; Performance
series	ACADIA
last changed	2022/06/07 07:59

_id	cf2009_159
id	cf2009_159
authors	Marin, Philippe; Lequay, Hervé and Bignon, Jean-Claude
year	2009
title	Un outil évolutionnaire d’aide à la conception architecturale créative : Mise en oeuvre d’un algorithme génétique et prise en compte des paramètres environnementaux; Evolutionary tool assisting creative architectural design: Implementation of an genetic algorithm and assessment of environmental parameters
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 159-172
summary	This work focuses on the development of a tool capable of assisting and supporting architectural design activity. We propose an evolutionary mechanism through the use of a genetic algorithm. Environmental parameters are convoked to drive the evolution. The solar passive qualities of the object under study allow the energizing evaluation. This paper deals with the interaction between verbal thinking and visual thinking through the use of this generative tool.
keywords	Genetic algorithm, creative design, environmental parameters
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	05bb
authors	Marina González de Kauffman, Ede Martinez de Adrianza, Carlos González Hernández
year	2001
title	Aplicacion de la programacion en cad para la modelizacion de trazados urbanos [Application of CAD-Programming for the Modeling of Urban Layouts]
source	2da Conferencia Venezolana sobre Aplicación de Computadores en Arquitectura, Maracaibo (Venezuela) december 2001, pp. 228-236
summary	To generate models of branched and reticular urban layouts, under three different forms of growth (linear, radial, strips), a program designed on AutoLISP Æ for the AutoCAD Æ V-2000 has been proposed. The generated models are both graphical as well as mathematical, and for each case are produced, considering the two variables assumed as inputs: the number of houses and the number of grouping units. The mathematical data is automatically saved in a MSExcel Æ spreadsheet created through a direct connection established from the AutoCAD Æ V-2000.
series	other
email
last changed	2003/02/14 08:29

_id	cd34
authors	Marinelli, A.M., Belibani, R. and Gadola, A.
year	1994
title	Multimedia in Communication: A Study on the Urban Image of Barcelona
doi	https://doi.org/10.52842/conf.ecaade.1994.103
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 103-107
summary	The Hypertext on Barcelona was realized within the interuniversity scientific research "La Produzione dei circuiti multimediali didattici per l'architettura e l'urbanistica" (The production of multimedia didactic circuits for architecture and urban planning), coordinator Prof. Paola Coppola Pignatelli - Dipartimento di Progettazione Architettonica e Urbana- Facoltà di Architettura, Università "La Sapienza", Roma, Italia. During the numerous debates on the relationship between multimedia and communication of the project a long list of problems emerged: the understanding and the management of explorable fields opened by these new media; the informative overflow that can introduce irrelevant information; the "interactive" anxiousness that produces a continuous jumping from one theme to another without any understanding; the identification of the right contents of a multimedia product, that requires an elaborate culture of media languages; the education of the users on new models of learning. From the debates emerged in short a principal point: the necessity to study and to experiment a "multimedia tool" able of transmitting knowledge not through a simple sum of data but through a group of information. If every single tool has -its own characteristics and if the combinations are not automatic, then the modes and contents should be examined. Is it possible therefore to invent a strategy of communication?
series	eCAADe
last changed	2022/06/07 07:59

_id	2caa
authors	Marinelli, Anna Maria and Graziano, Laura
year	1995
title	Urban Analysis and Hypermedia
doi	https://doi.org/10.52842/conf.ecaade.1995.149
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 149-154
summary	The structure of major European cities was formed in recent years more by stratification of different patterns, as it seems, than by urban planning. Moreover traditional analytical tools - such as cartography, which defines and symbolizes static data and their spatial connections - are not able to decode any more the image of cities. Modern city means not only static form, as public space is not a simple function. city includes movement, temporary objects, changing perceptions, fluxes. Therefore hypertexts could he a chance of building up and propagate a real knowledge about modern city. an effective action to reach qualification and management of urban spaces through citizens direct involvement in the city construction. A hypertext on the Rome quarter "Esquilino" has been carried out as an open structure, to probe the new representation method trough the construction of the real "image" of the quarter, gathering different information as historical, geographic and socioeconomical data, urban projects, citizens proposals.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_19.htm
last changed	2022/06/07 07:59

_id	architectural_intelligence2022_3
id	architectural_intelligence2022_3
authors	Mario Carpo
year	2022
title	Design and automation at the end of modernity: the teachings of the pandemic
doi	https://doi.org/https://doi.org/10.1007/s44223-022-00001-0
source	Architectural Intelligence Journal
summary	Many in the design community have long claimed that digital mass-customization is cheaper, faster, smarter and more environmentally sustainable than the mechanical mass-production of standardized industrial products; and that the electronic transmission of information is cheaper, faster, smarter, and more environmentally sustainable than the mechanical transportation of people and goods. The global pandemic has tragically proven that a computational alternative to the modern, mechanical way of making, working, and living, now exists, and it is viable. When we had to shut down corporate offices, global megafactories, suburban shopping malls, and intercontinental airports, we did. We did because we had to; but also because today's technology already allows us to do so.
series	Architectural Intelligence
email
last changed	2025/01/09 15:00

_id	44
authors	Mario Marino
year	1998
title	Simulacion del Comportamiento Ergonomico de un Producto Mecatronico (Simulation of the Ergonomic Behavior of a Mecatronic Product)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 332-335
summary	By means of clinical analysis, it has been observed that patients who must remain in bed for long periods due to the nature of the pathology they suffer, develope pressure sores by decubitus which become serious complications themselves. In our thesis we intend to propose an alternative from our Industrial Design point of view, we'll explain how to avoid the problems aforementioned. For the development of this thesis we've chosen computer software from CAD systems as an instrumental methodology. These systems allowed as to develop a theoretical model of interface. The empirical foundation on which our model is based, lies on the systematic analysis of the classic technique of pressore sores prevention. In computer simulation, a flexible plate, driven by a set of actuators, defines a kinematic behavior equivalent to the one produced by classic method. Two theoretical models were used, Model 1 and Model 2. Model 2 was created as a consequence of certain functional and ergonomic disorders found in electronic 3D maquettes developed during the design of Model 1. The development of Model 2 became the significant nucleus upon which the exposition of the theoretical model was centered.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	4d7d
id	4d7d
authors	Marionyt Tyrone Marshall
year	2010
title	HYGROSCOPIC CLIMATIC MODULATED BOUNDARIES: A Strategy for Differentiated Performance Using a Natural Circulative and Energy Captive Building Envelope in Hot and Moisture Rich Laden Air Environments
source	Perkins+Will Research Journal, Vol 02.01, 41-53
summary	The operation and construction of buildings account for almost half of the energy use in the United States. To meet global climate change targets, energy consumption of buildings in the long term must be reduced as well as carbon dioxide emissions. This article explores a theoretical building envelope that generates energy and produces water by drawing water vapor out of the air to deliver new sources of water; it lowers indoor humidity in hot and humid climates. The design in this model considers materiality, surface area and environmental conditions to influence build- ing form. The case in this article considers materials and systems application in the design of the building envelope. The hygroscopic building envelope design strategically senses varying conditions of concentration and density of moisture laden air to provide visual indications of its performance. It is a building skin that emulates biological processes by creating pressure differences and transferring energy in various forms.
keywords	biomimetics, building envelope, building façade, computational design, computational control, humidity, hygroscopic, renewable resources
series	journal paper
type	normal paper
email
more	http://www.perkinswill.com/research/research-journal-vol.-02.01.html
last changed	2010/10/31 02:39

_id	architectural_intelligence2024_13
id	architectural_intelligence2024_13
authors	Mark Balzar, Zeynep Aksöz Balzar & Galo Moncayo Asan
year	2024
title	Imag(in)e nature: imaging energetic footprint of urban environments through multispectral data acquisition
doi	https://doi.org/https://doi.org/10.1007/s44223-024-00052-5
source	Architectural Intelligence Journal
summary	The Vibrant Fields project endeavors to construct novel representational tectonics of urbanization, aiming to comprehend the materiality of forms and the genesis of multispectral relations within complex information systems governing the interplay of atmospheric and embodied energy cycles in the biosphere. This project asserts that any perceivable condition of nature arises from dynamic processes that transcend human sensory perception. The project observes the simultaneous realities and temporalities of urban field information within its ecological context. It investigates the architecture, technology, flora, and fauna of cities in relation to their geographic, geological, and ecological conditions, analyzing multiple temporal historical and geological scales. Inspired by theoretical biology, the project models the urban environment as a systemic entity characterized by modularity, representing the biosphere's dynamic interplay of chemical and physical elements engaged in information exchange within ecological systems, influenced by technology, geography, and atmospheric conditions. Vibrant Fields utilizes layers of observation systems to translate the complex biosphere into dimensionally reduced data streams. It introduces complementary devices, bridging the gap between global and local data to better understand microclimatic phenomena.
series	Architectural Intelligence
email
last changed	2025/01/09 15:03

_id	cdrf2023_295
id	cdrf2023_295
authors	Mark Balzar, Zeynep Aksöz Balzar, Galo Moncayo Asan
year	2023
title	OTTO: A Portable Urban Sensing Station to Survey the Energetic Footprint of Urban Microclimates
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_25
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
summary	OTTO (Orthographic Trans-territorial Operator) is a sensory device that collects data on the urban environment through multi-spectral sensing to study urban energy flows. We hypothesize that urban nature and energy are a combination of biological and technological factors that interact in a symbiotic environmental cycle. By examining their relationships, we can gain insight into the impact of climate change. OTTO aims to create a high-res survey of the urban environment by using a new combination of multi-spectral bands. This research maps the relationship between urban form and energy exchange to gain a deeper understanding of urban microclimates through multiple types of energy data.
series	cdrf
email
last changed	2024/05/29 14:04

For more results click below: