Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 673

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade03_153_183_knight
id	ecaade03_153_183_knight
authors	Knight, M. Brown, A.G.P., Hannibal, C., Noyelle, C. and Steer, O.
year	2003
title	Measurement of Presence in Large Scale Virtual Environments
doi	https://doi.org/10.52842/conf.ecaade.2003.153
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 153-160
summary	It is now widely accepted that a sense of presence in a virtual environment is a crucial part of the success of the ‘experience’. This paper extends the authors previous work in naturalistic interfaces and perception of image to test experimentally the degree to which the type of interface and visual nature of the virtual environment determine the experience of presence or ‘being there’ in a large scale architectural virtual environment. The importance of presence to the success of architectural virtual environments is an important discussion. Should architectural VEs strive to be hyper-real (with all the attendant hardware issues of manipulating large amounts of data in real-time) or does a degree of abstraction in representation still afford an acceptable degree of presence?
keywords	Virtual Environments, Presence
series	eCAADe
email
more	www.liv.ac.uk/abe/caadru
last changed	2022/06/07 07:51

_id	caadria2003_a5-1
id	caadria2003_a5-1
authors	Knight, Michael W. and Brown, Andre G.P.
year	2003
title	NAVRgate X, A Naturalistic Navigation Metaphor for Large Scale Virtual Environments
doi	https://doi.org/10.52842/conf.caadria.2003.625
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 625-630
summary	This paper describes the latest in a series of real-world, low-cost interfaces for virtual reality. nAVRgate (the AVR being Architectural Virtual Reality) has looked at real-world analogies for interfacing with 'real' virtual environments in an attempt to improve the sense of presence, the phenomenon of sense of presence in virtual environments (VEs) often being seen as the real essence of Virtual Reality (Laurel, 1993)
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	sigradi2013_111
id	sigradi2013_111
authors	Arpak, Asli
year	2013
title	Abstract Styles in the Vienna Workshop: A Formalist Analysis of Josef Hoffman’s Two Designs
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 197 - 201
summary	A shape grammar formalism is elaborated for the Vienna Workshop (Wiener Werkstaette) designer Josef Hoffmann’s two designs. Early instances of abstract expressionism are traced in Hoffman’s works by investigating stylistic parallels through shape rules and computations. The analysis of Hoffmann’s two works are carried out in parallel to Terry Knight’s analysis of De Stijl artists Georges Vantongerloo and Fritz Glarner paintings with the normal form grammars.
keywords	Josef Hoffmann; Wiener Werkstaette; Shape grammars; Abstraction; Style
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2009_044
id	ecaade2009_044
authors	Arpak, Asli; Sass, Larry; Knight, Terry
year	2009
title	A Meta-Cognitive Inquiry into Digital Fabrication: Exploring the Activity of Designing and Making of a Wall Screen
doi	https://doi.org/10.52842/conf.ecaade.2009.475
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 475-482
summary	The design process is observed in ‘self-reflection’ by an experiment including visual computing, structure design, joint design, and assembly design. The experiment is defined as the making of a self-supporting timber wall screen, which includes laser-cutting and rapid-prototyping. The reciprocal action between the visual and physical realms is observed through the design activity.
wos	WOS:000334282200057
keywords	Fabrication, meta-cognition, self-reflection, visual, physical
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia23_v3_91
id	acadia23_v3_91
authors	Knight, Terry
year	2023
title	Teaching Award of Excellence
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	My work is research focused. Broadly speaking, I’m interested in the “How” of creative production, as opposed to the “What”. I ask “How is this?” not “What is this?” I am interested in “How” designs and things are made or become, in the processes or paths to form, whether abstract or material. As a process carried out over time, computation offers a unique means for understanding and describing the “How” of design and making. I explore this potential with shape grammars and, most recently, with making grammars. The unique visual and spatial nature of the rules and computations of these grammars is aimed at unveiling the “How” in design.
series	ACADIA
type	award
email
last changed	2024/04/17 13:59

_id	2559
authors	Knight, Terry W.
year	1991
title	Designing with Grammars
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 33-48
summary	Shape grammars that generate languages of designs have been used widely over the past several years to describe and understand a diversity of architectural and other styles of designs. These grammars have been developed to address two fundamental concerns in design: 1) the analysis of contemporary or historic styles of designs, and 2) the synthesis or creation of completely new and original styles of designs. Most applications of shape grammars so far have been concerned with analysis. The creative use of shape grammars - the use of grammars to invent new architectural or other designs - has not been exploited nearly as well. A new series of exercises for designing with shape grammars, and also with color grammars, is sketched informally here. These exercises are currently being used in classes in the Architecture and Urban Design Program at U.C.L.A.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	ac18
authors	Knight, Terry W.
year	1986
title	Transformations of Languages of Designs
source	University of California, Graduate School of Architecture and Urban PIanning, Los Angeles
summary	Stylistic change and innovation is a central and traditional issue in art and architecture. In this study, a formal model is developed for representing stylistic change. Styles are defined in terms of rule-based systems called shape grammars that generate languages of designs. Changes in styles are represented as transformations of the shape grammars that define these styles. The model is first sketched informally and considered in relation to other, traditional approaches to style and change. It is then presented in detail and illustrated with numerous simple examples. Last, the model is applied to describe actual, historical examples of stylistic transformations: one in the decorative arts, one in the fine arts, and one in architecture.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	sigradi2008_175
id	sigradi2008_175
authors	Knight, Terry; Larry Sass, Kenfield Griffith, Ayodh Vasant Kamath
year	2008
title	Visual-Physical Grammars
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper introduces new visual-physical design grammars for the design and manufacture of building assembly systems that provide visually rich, culturally resonant design variations for housing. The building systems are intended to be tailored for particular cultures and communities by incorporating vernacular, decorative design into the assembly design. Two complementary areas of computational design research are brought together in this work: shape grammars and digital fabrication. The visual or graphic aspects of the research are explored through shape grammars. The physical design and manufacturing aspects are explored through advanced digital design and fabrication technologies and, in particular, build on recent work on mono-material assemblies with interlocking components that can be fabricated with CNC machines and assembled easily by hand on-site (Sass, 2007). This paper describes the initial, proof-of-concept stage of this work: the development of an automated, visual-physical grammar for an assembly system based on a vernacular language of Greek meander designs. A shape grammar for the two-dimensional Greek meander language (Knight, 1986) was translated into a three-dimensional assembly system. The components of the system are uniquely designed, concrete “meander bricks” (Figure 1). The components have integrated alignment features so that they can be easily fitted and locked together manually without binding materials. Components interlock horizontally to form courses, and courses interlock vertically in different ways to produce a visual variety of meander walls. The assembly components were prototyped at desktop scale with a layered manufacturing machine to test their appearance after assembly and their potential for design variations (Figure 2). Components were then evaluated as full-scale concrete objects for satisfaction of physical constraints related to concrete forming and component strength. The automated grammar (computer program) for this system generates assembly design variations with complete CAD/CAM data for fabrication of components formed from layered, CNC cut molds. Using the grammar, a full-scale mockup of a corner wall section was constructed to assess the structural, material, and aesthetic feasibility of the system, as well as ease of assembly. The results of this study demonstrate clearly the potentials for embedding visual properties in structural systems. They provide the foundations for further work on assembly systems for complete houses and other small-scale structures, and grammars to generate them. In the long-term, this research will lead to new solutions for economical, easily manufactured housing which is especially critical in developing countries and for post-disaster environments. These new housing solutions will not only provide shelter but will also support important cultural values through the integration of familiar visual design features. The use of inexpensive, portable digital design and fabrication technologies will allow local communities to be active, cooperative participants in the design and construction of their homes. Beyond the specific context of housing, visual-physical grammars have the potential to positively impact design and manufacture of designed artifacts at many scales, and in many domains, particularly for artifacts where visual aesthetics need to be considered jointly with physical or material requirements and design customization or variation is important.
keywords	Shape grammar, digital fabrication, building assembly, mass customization, housing
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	2004_119
id	2004_119
authors	McGill, Miranda and Knight, Terry
year	2004
title	Designing Design-Mediating Software - The Development Of Shaper2D
doi	https://doi.org/10.52842/conf.ecaade.2004.119
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 119-127
summary	This work examines the means by which design software is created, from a designer’s - rather than a programmer’s - viewpoint, through the specific example of Shaper2D. Shaper2D employs an intuitive, visual interface that encourages a „learning by designing“ approach to shape grammar education.
keywords	Computational Design; CAD; Design Education; Shape Grammars; User Interface Design
series	eCAADe
last changed	2022/06/07 07:58

_id	fb39
authors	Seebohm, Thomas
year	1994
title	Review of Transformation in Design: A Formal Approach to Stylistic Change and Innovation in the Visual Arts
source	Terry Knight, Transformation in Design: A Formal Approach to Stylistic Change and Innovation in the Visual Arts, Cambridge University Press, 1994, 258 p.
summary	Shape grammars are languages of two- and three-dimensional forms analogous to spoken languages. A great deal of attention has been centered on them as a basis for supporting design with computers. They are sets of rules which can be used to create families of visually related designs. Each design, in the family of possible designs that can be created by a set of rules, is generated by successively applying rules from the set to the current state of a design until no more rules are applicable. A rule may be applied if certain shapes specified by the rule exist in the current state of the design. After application of a rule, the specified shapes are substituted with one or more replacement shapes specified by the rule thereby adding, subtracting or modifying shapes in the current design. From a single initial state many alternative designs can be generated because there is usually more than one applicable rule at any stage.
series	other
email
last changed	2003/05/15 20:26

_id	sigradi2003_020
id	sigradi2003_020
authors	Abarca, R., Díaz, S. and Moreno, S.
year	2003
title	Desarrollo de material informatico-educativo para la enseñanza de la geometría a estudiantes de diseño (Development of IT-based educational material for the teaching of geometry to students of design)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	This paper is born as an answer to the meaningful learning difficulties and academic performance in Spatial and Flat Geometry course on second year Design School at Universidad de las Americas University, Santiago de Chile. The problem is faced from the potentiality that digital environment gives us in representation, display options, shape and projection testing, analysis and non visual accounts to teach flat and spatial geometry within the receptors' codes and coherent with designer's own language.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	50b1
authors	Abbasov, A.M. and Mamedova, M.H.
year	2003
title	Application of fuzzy time series to population forecasting
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	The potential of fuzzy logic application in simulating of demographic processes by the example of population forecasting task hasbeen investigated. The particularities of population as dynamical system functioning under the condition of uncertainty have beenexamined and fuzzy statement problem has been suggested. The strategy of population forecasting using the method of fuzzy timeseries model has been proposed. The simulations on retrospective evaluation of population are carried out and on the base of the results of these simulations the conclusion avocet the effectiveness of utilization of fuzzy model for demographic forecasting has been model.
series	other
last changed	2003/11/21 15:15

_id	cf2003_m_006
id	cf2003_m_006
authors	ACHTEN, Henri and JESSURUN, Joran
year	2003
title	Learning From Mah Jong - Towards a Multi-Agent System that can Recognize Graphic Units
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 115-124
summary	Sketching is a major means of exploiting the first conceptual developments in architectural design. If we want to support the architect in the ideas-developing phase of design, then we need to understand the conventions of depiction and encoding in drawings. The theory of graphic units provides an extended list of such conventions that are widely used. We propose that a multi-agent system for recognition of graphic units in drawings is fruitful: agents can specialize in graphic units, a multi-agent system can deal with ambiguity through negotiation and conflict resolution, and multi-agent systems function in dynamically changing environments. We first make a multi-agent system that can do something simpler: playing Mah Jong solitary. The Mah Jong solitary system shares the following important features with a multi-agent system that can recognize graphic units: (1) specialized agents for moves; (2) negotiation between agents to establish the best move; (3) dynamically changing environment; and (4) search activity in more advanced strategies. The paper presents the theoretical basis of graphic units and multi-agents systems. The multi-agent framework and its implementation is presented. Various levels of game play are distinguished, and these are correlated to the multi-agent system. The paper shows how the findings form the basis for graphic unit recognition.
keywords	artificial intelligence, games, graphic units, agents
series	CAAD Futures
email
last changed	2003/11/22 16:39

_id	ecaade03_269_43_achten
id	ecaade03_269_43_achten
authors	Achten, Henri and Joosen, Gijs
year	2003
title	The Digital Design Process - Reflections on a Single Design Case
doi	https://doi.org/10.52842/conf.ecaade.2003.269
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 269-274
summary	CAD tools are increasing their expressive and geometric power to enable a design process in which the computer model can be used throughout the whole design process for realizing the design. Such a process, in which other media such as physical scale models or drawings are no longer required by necessity to facilitate the design process, can be considered a digital design process. Rather than proposing that such a process is ideal – drawings and scale models should not be discarded – we feel that when taken as a starting point, the digital design process raises a number of new challenges to architectural design that deserve attention. These challenges concern the basic activities in design: exploration of the problem space, creating preliminary solutions, understanding consequences of design decisions, and so forth. In this paper we take the concrete design case of a graduation project that was developed from the start solely in CAD. We identify a number of key issues in that process such as continuous modeling, the model as design, continuous pliability, localized focus, and postponed decision. These issues not only have a technical, CAD-related aspect, but also are connected to architectural design. Most of these aspects are subject of contemporary debate in architectural design. On this basis, we can indicate where CAD is making a potential difference in architectural design.
keywords	Digital design, CAAD
series	eCAADe
email
more	http://www.ds.arch.tue.nl/General/Staff/henri
last changed	2022/06/07 07:54

_id	ijac20031103
id	ijac20031103
authors	Achten, Henri H.
year	2003
title	New Design Methods for Computer Aided Architectural Design Methodology Teaching
source	International Journal of Architectural Computing vol. 1 - no. 1
summary	Architects and architectural students are exploring new ways of design using Computer Aided Architectural Design software. This exploration is seldom backed up from a design methodological viewpoint. In this paper, a design methodological framework for reflection on innovate design processes by architects that has been used in an educational setting is introduced.The framework leads to highly specific, weak design methods, that clarify the use of the computer in the design process.The framework allows students to grasp new developments, use them in their own design work, and to better reflect on their own position relative to CAAD and architectural design.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	ecaade03_369_112_akgun
id	ecaade03_369_112_akgun
authors	Akgun, Yenal
year	2003
title	An Interactive Database (HizmO) for Reconstructing Lost Modernist Izmir:
doi	https://doi.org/10.52842/conf.ecaade.2003.369
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 369-372
summary	The research project in progress in the School of Architecture at the Izmir Institute of Technology includes documentation and reconstruction (by 3D modeling in electronic media) of damaged and lost early modern buildings in the Izmir region. The research aims to analyze the differences between Izmir modern buildings and Universal Modern Style, and preserve information on architectural heritage for future generations. The project is at the phase of developing an interactive web-based historical database (HizmO) that includes data (information, images, technical drawings, VRML models) and visualization of the findings. This database aims to be a pioneer in Mediterranean Region for exhibition of relations between traditional architecture (especially Mediterranean locality) and modernism, and organization of a network and off-campus learning activity for Mediterranean architecture that serve as a guide for students, researchers and architects. This paper aims at introducing this research and discussing the application of the database “HizmO,” its aims and potential effects on education in architectural history.
keywords	E-learning, educational database, architectural history, VRML
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2004_paper12
id	ascaad2004_paper12
authors	Al-Qawasmi, Jamal
year	2004
title	Reflections on e-Design: The e-Studio Experience
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	The influence of digital media and information technology on architectural design education and practice is increasingly evident. The practice and learning of architecture is increasingly aided by and dependant on digital media. Digital technologies not only provide new production methods, but also expand our abilities to create, explore, manipulate and compose space. In contemporary design education, there is a continuous demand to deliver new skills in digital media and to rethink architectural design education in the light of the new developments in digital technology. During the academic years 2001-2003, I had the chance to lead the efforts to promote an effective use of digital media for design education at Department of Architecture, Jordan University of Science and Technology (JUST). Architectural curriculum at JUST dedicated much time for teaching computing skills. However, in this curriculum, digital media was taught in the form of "software use" education. In this context, digital media is perceived and used mainly as a presentation tool. Furthermore, Computer Aided Architectural Design and architectural design are taught in separate courses without interactions between the two.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	caadria2003_c2-4
id	caadria2003_c2-4
authors	Al-Sallal, Khaled A.
year	2003
title	Integrating Energy Design Into Caad Tools: Theoretical Limits and Potentials
doi	https://doi.org/10.52842/conf.caadria.2003.323
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 323-340
summary	The study is part of a research aims to establish theoretical grounds essential for the development of user efficient design tools for energy-conscious architectural design, based on theories in human factors of intelligent interfaces, problem solving, and architectural design. It starts by reviewing the shortcomings of the current energy design tools, from both architectural design and human factor points of view. It discusses the issues of energy integration with design from three different points of view: architectural, problem-solving, and human factors. It evaluates theoretically the potentials and limitations of the current approaches and technologies in artificial intelligence toward achieving the notion "integrating energy design knowledge into the design process" in practice and education based on research in the area of problem solving and human factors and usability concerns. The study considers the user interface model that is based on the cognitive approach and can be implemented by the hierarchical structure and the object-oriented model, as a promising direction for future development. That is because this model regards the user as the center of the design tool. However, there are still limitations that require extensive research in both theoretical and implementation directions. At the end, the study concludes by discussing the important points for future research.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2005_731
id	sigradi2005_731
authors	Albornoz Delgado, Humberto Ángel; Laura Talía Escalante Rodríguez, Leticia Gallegos Cazares
year	2005
title	Didactic Design: light and optics for preschool level
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 731-737
summary	Since 2003, we have been developing a pedagogic proposal and didactic material for teaching Light and Optics to kindergarden children that enhances the construction of the first scientific thinking schemes. The design (industrial and graphic) applied to this project has generated an educational product composed of 44 objects. These materials allow teaching concepts such as: combination of colors, light indispensable to see, formation of shadows and images are not objects. These have been developed as inciters of curiosity, capable to awake the innate restlessness of children, achieving to stimulate their creativity. The purpose is to explore knowledge and construct their own ideas; enrich their experiences and inquire a reality that was drawn grey and tedious, generating a process of manipulation-action and then representation-conceptualization. This product has been successfully used as a pilot test in a kindergarden, reflecting significant gains in students’ science learning. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: