Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 5288

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2003_a7-2
id	caadria2003_a7-2
authors	Papamichael, K.
year	2003
title	The Role of Computers in the Building Life Cycle - What Computers Can and Cannot Do
doi	https://doi.org/10.52842/conf.caadria.2003.905
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 905-918
summary	The objective of this paper is to provide a conceptual framework that facilitates the development of integrated software environments that address the data and process needs of all building-related disciplines through the whole buil ding life cycle. The conceptual framework is based on a comprehensive analysis of the data and processes involved in d ecision-making, which is the common abstraction of all disciplines throughout the building life cycle. The role of computers is examined in every step of the decision-making process and through the building life cycle, focusing on what computers can and cannot do. The capabilities of computers are the used to present a vision for what the future of building design, construction and operation may be. While the vision is based on technologies that are already available, its realization requires significant research and development efforts. Conceptual, technical and strategic challenges to realizing the vision are presented and discussed.
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	sigradi2003_036
id	sigradi2003_036
authors	Donath, Dirk and González, Luis Felipe
year	2003
title	Rule-based spaces configuration procedures to support user-designed housing
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	This article reports on our current explorations on systemizable tasks of architectural design and parametric design supported by rule-based generation methods of spatial configuration alternatives to assist user-design processes of progressive development low-cost dwellings. This exploration is part of an ongoing major research towards an integrated planning support system for low-income housing; we called Esther, which is focused on the development of a network-based set of tools to support logistics of self-designed /-built dwellings life-cycle. Esther addresses the systemized collaborative work between dwellers and specialists during the whole development cycle of dwellings.
keywords	Planning tool; user-designed housing; parametric design; decision support; adaptable dwelling
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	cf2011_p163
id	cf2011_p163
authors	Park, Hyoung-June
year	2011
title	Mass-Customization in the Design of 4,000 Bus Stops
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 265-278.
summary	In Hawaii, ‚"TheBus‚" has been a main transportation system since 1971. Considering the high cost of living in Hawaii and the absence of a rail system, the use of ‚"TheBus‚" has been an instrumental vein of the city life in Honolulu with rhythmical pauses at about 4,000 bus stops in Honolulu. However, existing undifferentiated bus stops are developed from a cost effective mass production system so that they have been problematic for satisfying specific needs from various site conditions. In this research, an integrated computational method of mass-customization for designing 4,000 bus stops is introduced. According to various site conditions, the design of each bus stop is customized. Unlike the mass‚Äêproduced bus stops commonly seen in cities today, the proposed computational method in this paper produces bus stop design outcomes that fit into the physical characteristics of the location in which they are installed. Mass-customization allows for the creation and production of unique or similar buildings and building components, differentiated through digitally‚Äêcontrolled variation (Kolarevic, 2003). The employment of a computational mass‚Äêcustomization in architectural design extends the boundary of design solutions to the satisfaction of multi-objective requirements and unlimited freedom to search alternative solutions (Duarte, 2001; Caldas, 2006). The computational method developed in this paper consists of 1) definition of a prototype, 2) parametric variation, 3) manual deformation, and 4) simulation based deformation. The definition of a prototype is the development of a basic design to be transformed for satisfying various conditions given from a site. In this paper, the bus stop prototype is developed from the analysis of more than 300 bus stops and the categorization of the existing bus stops according to their physical conditions, contextual conditions, climatic conditions, and existing amenities. Based upon the outcome of the analysis, the design variables of a bus stop prototype are defined. Those design variables then guide the basic physical parameters for changing the physical configuration of the prototype according to a given site. From this, many possible design outcomes are generated as instances for further developments. The process of manual deformation is where the designer employs its intuition to develop the selected parametric variation. The designer is compelled to think about the possible implication derived from formal variation. This optional process allows every design decision to have a creative solution from an individual designer with an incidental quality in aesthetics, but substantiated functional quality. Finally the deformation of the selection is guided and controlled by the influence of sun direction/ exposure to the selection. The simulation based deformation starts with the movement of the sun as the trigger for generating the variations of the bus stop prototype. The implementation of the computational method was made within the combination of MEL (Maya Enbedded Language), autodesk MAYA and Ecotect environment.
keywords	mass-customization, parametric variation, simulation based deformation
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	64c0
id	64c0
authors	Pektas, S T
year	2003
title	A FRAMEWORK FOR BUILDING DESIGN PROCESS MODELING WITH PARAMETER-BASED DESIGN STRUCTURE MATRICES
source	In C. J. Anumba (Ed.), Innovative Developments in Architecture, Engineering, and Construction. (pp. 25-31). Rotterdam: MillPress
summary	Architecture/Engineering/Construction (AEC) industry is one of the multidisciplinary domains in which collaboration among related parties is utmost important. While the knowledge needed for building processes are distributed among the different participants from diverse disciplinary backgrounds, the product of their activities, i.e. the building itself, must be highly integrated. Despite the intense flow of information between design professionals, there is a lack of research to better understand and manipulate these flows. Furthermore, most of the current process modeling tools in the AEC industry do not enable analyses of iteration in the process and they represent the process at high levels with very little information at lower levels. In order to resolve the issues mentioned above, this paper introduces the use of parameter-based dependency structure matrix as a process modeling and system analysis tool for building design. The method reveals insights into the process structure, optimum sequence of parameter decisions, iterative cycles and concurrency in the process. A knowledge management framework for parameter-based DSM applications is proposed and the application of the framework is demonstrated through a real life building design problem.
keywords	Design Integration, Design Process Modeling, Information Flow, and Parameter-based Dependency Structure Matrix
series	other
type	normal paper
email
last changed	2005/12/01 15:52

_id	a96f
id	a96f
authors	Clayton, M., Johnson, R., Song, Y and Al-Qawasmi, J.
year	1998
title	Delivering Facility Documentation using Intranet Technology
doi	https://doi.org/10.52842/conf.acadia.1998.240
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 240-253
summary	Intranet technologies present new opportunities for delivering facility documentation for use in facility management. After the design stage, building documentation is reused to support construction and then facility operation. However, a common perception is that construction documents and as-built drawings are less than optimal for reuse to support operations. We have conducted a study of facility management processes and the information content of facility documentation in the context of information technologies that are emerging into the marketplace. The study provides guidance for facility managers who are implementing and fielding new information technology systems. A better understanding of information needs during operations may also help designers to better structure their own documents for reuse. An analysis of documents that are used throughout the life cycle of facilities has led us to a characterization of operations documents that are distinct from design drawings, record drawings or as-built drawings. From an analysis of facility management processes, we have identified different roles for facility documentation in those processes. Facility documentation may be used as a resource, as input, or as output. Furthermore, from interviews of facility management personnel, we identified facility information that was rated high in importance and low in satisfaction that might be targeted when implementing a facility information system. We prepared software demonstrations that show how the information may be extracted from drawings, entered into databases and then retrieved via Web and CAD interfaces. We suggest that operations documents consist of a variety of information types and require several kinds of information tools, including databases, CAD drawings and hypertext. Intranet technologies, databases and CAD software can be integrated to achieve facility management systems that address shortcomings in current facility management operations. In particular, intranet technologies provide improved accessibility to information for facility management customers and occasional users of the systems. Our study has produced recommendations based upon utility and ease-of-implementation for delivery of information from the design team to the owner, and among personnel during operation of the facility.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	e0a3
authors	Johnson, Robert E.
year	1984
title	Computer-Aided Energy Economics for Early Concept Design Analysis
source	Building Economics, International Symposium Proceedings (3rd : Canada). 1984? vol. 3: pp.46-57 : ill. includes bibliography
summary	Decisions that have the greatest impact on energy cost performance are made very early in the design process. The problem is that these early design decisions are rarely tested thoroughly until very late in design. Usually this is due to the difficulties inherent in the use of the more sophisticated analysis procedures. Hourly energy computer simulations are costly to use, often require detailed input preparation, and use large ''main-frame' computers. Easier to use energy evaluation tools such as manual calculations and simplified computer programs do not yield reliable results. This is particularly true when passive solar design solutions are being tested. However, even the sophisticated approaches often have a limited ability to comprehensively model the economic implications of the more accurate energy simulations. This paper is intended to describe efforts at the University of Michigan to develop a more integrated approach to the assessment of energy economics - one that may be used at the earliest stages of concept design. The approach taken has been to concentrate on developing interactive, easy to use computer programs to describe building design proposals. This computer-generated building model is then used to automatically generate the information required to run a large, sophisticated energy analysis program developed by the U.S. Army Corps of Engineers (BLAST). Total life cycle cost analysis is performed either using procedures within BLAST or an 'electronic spreadsheet' system. Perceived deficiencies in the current state of this energy/cost evaluation system are described, and future research directions are presented
keywords	architecture, energy, analysis, CAD, economics, design, methods
series	CADline
last changed	2003/06/02 10:24

_id	4c3d
authors	Johnson, Robert
year	1990
title	The Economics of Building : A Practical Guide for the Design Professional
source	xvii, 209 p. : ill. New York: John Wiley & Sons, 1990. includes bibliography
summary	This book is both an introduction to economic principles and theories as they relate to building design decisions, and a practical reference guide on how to use economic principles when making decisions. It unites a variety of specialized topics relating to building economics, such as cost estimating, life-cycle costing, cost indexes, capital budgeting, decision analysis, and real estate feasibility analysis, developing them within the framework of an integrated approach to making building design and management decisions. This integrated approach is developed by adapting basic approaches of decision theory to economic evaluation. This book attempts to achieve a sensible balance between the need to simplify relatively complex economic and decision theory principles and practices without sacrificing the intellectual content of the material
keywords	economics, practice, education, construction, architecture, theory, building process, evaluation, prediction, management, decision making
series	CADline
last changed	1999/02/12 15:08

_id	ascaad2007_005
id	ascaad2007_005
authors	Loh, E.; N. Dawood and J. Dean
year	2007
title	Integration of 3D Tool with Environmental Impact Assessment (3D EIA)
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 51-66
summary	Environmental Impact Assessment (EIA) tools have been available for some years now and their function is predominantly to predict and identify the environmental impact of building projects. However EIA analysis is often done after the completion of the project or building and when it is too late to influence the design, materials or components to be used. Also, more than 80% of the design decisions that influence the whole life cycle of a building are made at the initial design phase. EIA does not receive the required attention. A new approach is suggested in this research to ensure that designers, clients and stakeholders have all of the relevant information needed at the outline design stage for the assessment of cost and environmental impact. The idea is that building owners and users will have the opportunity to minimise their operating costs from ‘cradle to cradle’. As energy resources reduce over the next few decades, the value of this research will increase and it is possible to foresee government legislation which drives building construction in this direction. By making environmental impact analysis readily linked to 3D products at the very early stage of the design process, the value of 3D technology will be enhanced significantly resulting in more use of the technology in the construction process. In this context, the objective of this paper is to introduce and explore approaches for developing integrated 3D- EIA, LCA (Life Cycle Analysis) and LCCA (Life Cycle Cost Analysis) and VR (Virtual Reality) tools and develop trade-off analysis to assist in the decision making process. To demonstrate initial results, a pilot case study in the UK is being developed.
series	ASCAAD
last changed	2008/01/21 22:00

_id	ecaade2024_254
id	ecaade2024_254
authors	M. Sadeghi, Hassan; Erhan, Halil; M. Abuzuraiq, Ahmed
year	2024
title	Sustainability Data Analytics an Integrated Data-Informed Approach for Assessing the Sustainability of Design Alternatives
doi	https://doi.org/10.52842/conf.ecaade.2024.1.725
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 1, pp. 725–734
summary	This study presents an interactive visualization strategy for evaluating design alternatives' sustainability, driven by data from building information modelling (BIM) and life cycle assessment (LCA). After outlining a workflow, we identified the key interaction features of sustainability data to evaluate and improve LCA performance. The low-fidelity prototype, called Green Plans, is presented as a design analytics system aiming to describe these key features. The prototype uses parallel coordinates and Sankey diagrams to examine how form, material, and envelope affect sustainability, and the analytic hierarchy process (AHP) is used to inform the conceptual design. Sustainability is evaluated using key metrics such as global warming potential (GWP), energy consumption, and greenhouse gas (GHG) emissions. The study proposes design data visualization and suggests improvements in simulation, comparative analysis, and integration with design tools.
keywords	sustainability assessment, comparative analytics, Life Cycle Assessment, interactive design data visualization, design analytics
series	eCAADe
email
last changed	2024/11/17 22:05

_id	ddssar0223
id	ddssar0223
authors	Mahdavi, A, Suter G. and Ries, R.
year	2002
title	A Representation Scheme for Integrated Building Performance Analysis
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	This paper presents a representational scheme for integrated building performance analysis. The underlying research work was motivated by the need for seamless exchange of structured design information.A comprehensive and widely accepted industry standard suitable for exchanging design information among the various AEC (Architecture/Engineering/Construction) applications has yet to emerge. As a contribution to this on-going discussion, we present a specific approach to the integration problem in building product modeling. This approach can be viewed as pragmatic or bottom-up in the sense that itwas driven by the informational needs of related individual domains (particularly in the early stages of design) rather than by a quest for a universally applicable solution. In this paper, we describe a schemawhich emerged from the SEMPER effort, a multi-year project aimed at supporting detailed performance analysis for early design in the energy, life-cycle analysis, lighting, and thermal comfort domains. Thisschema relies on a representational division of labor between a shared building model, and various disciplinary (domain) models. Specifically, we present a documentation of the shared object model together with disciplinary models for the energy, light, acoustics, and life-cyle assessment domain.
keywords	building product models, building performance, integration
series	DDSS
last changed	2003/08/07 16:36

_id	ecaade2011_045
id	ecaade2011_045
authors	Noriega, Farid Mokhtar; Barba, Victor Garcia; Merino, Jose Antonio; Zancajo, Jose Julio; Pérez, Teresa Mostaza
year	2011
title	ArchiInspection Project: Integrated Non Destructive Testing, A Building Information Model Approach
doi	https://doi.org/10.52842/conf.ecaade.2011.383
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.383-392
summary	A non destructive testing process is becoming a technical need, thousands of buildings and huge urban areas will have to be adapted to restrictive energy-saving standards and sustainability criteria. Analysis and diagnostics are required on a massive scale. Building Information Modeling seems to be the adequate environment to assemble huge amounts of data. At this moment both hardware and software technologies are performing moderately well separately. The challenge is to connect them and in the long run automate data collection and conversion to a unified model that could be maintained during the programmed building life cycle. The aim of this research is to discuss the challenge of NDT hardware and BIM software systems integration and define the basic steps for the best practices to undertake it in a fast and accurate manner as well as to define the present and future connections to be developed. A 3 phase joint research project is proposed here and basic needs are analysed. Many lessons have been learned from field work, data translation and data incompatibilities with many shortcomings being detected.
wos	WOS:000335665500044
keywords	BIM; Architectural Non Destructive Testing; Architectural conservation databases; information interoperability
series	eCAADe
email
last changed	2022/05/01 23:21

_id	096e
authors	Papamichael, K., Porta, J.L., Chauvet, H., Collins, D., Trzcinski, T. , Thorpe, J. and Selkowitz, S.
year	1996
title	The Building Design Advisor
doi	https://doi.org/10.52842/conf.acadia.1996.085
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 85-97
summary	The Building Design Advisor (BDA) is a software environment that supports the integrated use of multiple analysis and visualization tools throughout the building design process, from the initial, schematic design phases to the detailed specification of building components and systems. Based on a comprehensive design theory, the BDA uses an object-oriented representation of the building and its context, and acts as a data manager and process controller to allow building designers to benefit from the capabilities of multiple tools. The BDA provides a graphical user interface that consists of two main elements: the Building Browser and the Decision Desktop. The Browser allows building designers to quickly navigate through the multitude of descriptive and performance parameters addressed by the analysis and visualization tools linked to the BDA. Through the Browser the user can edit the values of input parameters and select any number of input and/or output parameters for display in the Decision Desktop. The Desktop allows building designers to compare multiple design alternatives with respect to any number of parameters addressed by the tools linked to the BDA. The BDA is implemented as a Windows-based application for personal computers. Its initial version is linked to a Schematic Graphic Editor (SGE), which allows designers to quickly and easily specify the geometric characteristics of building components and systems. For every object created in the SGE, the BDA supplies “smart” default values from a Prototypical Values Database (PVD) for all non-geometric parameters required as input to the analysis and visualization tools linked to the BDA. In addition to the SGE and the PVD, the initial version of the BDA is linked to a daylight analysis tool, an energy analysis tool, and a multimedia Case Studies Database (CSD). The next version of the BDA will be linked to additional tools, such as a photo-accurate rendering program and a cost analysis program. Future versions will address the whole building life-cycle and will be linked to construction, commissioning and building monitoring tools.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	caadria2017_017
id	caadria2017_017
authors	Park, Hyejin, Lee, Seunghyun, Kim, Eonyong and Choo, Seungyeon
year	2017
title	A Proposal for Building Safety Diagnosis Processes using BIM-based Reverse Engineering Technology
doi	https://doi.org/10.52842/conf.caadria.2017.673
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 673-682
summary	Recently, the aging of buildings is accelerating around the world. In line with this, architectural structures constructed long time ago require life extension and ongoing management and protection for improvement, because they are too deteriorated. In particular, since structural safety inspection and analysis in building is very important, 'DFS (Design For Safety)'system has been introduced and conducted at the national level in Korea for the whole building life cycle management system encompassing the entire design, work commencement, construction, and completion stages. However, we do not have a system ranging from repair and reinforcement work plans in doing safety design, structural inspection and analysis to ongoing safety inspection. Therefore, it is necessary to establish a system to produce and share integrated information and conduct a research to manage architectural structure across the whole life cycle. Accordingly, this study aims to propose BIM-based reverse engineering technology for generating a safety management model based on laser scanner, verify the investigation items to be utilized of the design when building safety, and seek ways to utilize them for safety design.
keywords	BIM; reverse engineering; building safety diagnosis; laser scanning; design for safety
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	9dfa
authors	Ries, R. and Mahdavi, A.
year	1999
title	Environmental Life Cycle Assessment in an Integrated CAD Environment: The Ecologue Approach
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 351-363
summary	Construction and operation of buildings is a major cause of resource depletion and environmental pollution. Computational performance evaluation tools could support the decision making process in environmentally responsive building design and play an important role in environmental impact assessment, especially when a life cycle assessment (LCA) approach is used. The building domain, however, presents notable challenges to the application of LCA methods. For comprehensive environmental impact analysis to be realized in a computational support tool for the building design domain, such tools must a) have an analysis method that considers the life cycle of building construction, operation, and decommissioning, b) have a representation that is able to accommodate the data and computability requirements of the analysis method and the analysis tool, and c) be seamlessly integrated within a multi-aspect design analysis environment that can provide data on environmentally relevant building operation criteria. This paper reviews the current state of assessment methods and computational support tools for LCA, and their application to building design. Then, the implementation of an application (ECOLOGUE) for comprehensive computational assessment of environmental impact indicators over the building life cycle is presented. The application is a component in a multi-aspect space-based CAD and evaluation environment (SEMPER). The paper describes the use and typical results of ECOLOGUE system via illustrative examples.
keywords	Life Cycle Assessment, Integrated Computational Environmental Analysis
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	0767
authors	Ries, Robert and Mahdavi, Ardeshir
year	2001
title	Evaluation of Design Performance through Regional Environmental Simulation
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 629-642
summary	Computational building simulation tools have historically viewed buildings as artefacts isolated and disconnected from their contexts. At most, the external environmental conditions have been viewed as outside influences or stressors encapsulated in, for example, weather files for energy simulation or sky models for lighting simulation. In the field of environmental assessment, life cycle analysis (LCA) has followed a similar path of isolating the artefact under analysis from its context. Modeling the building artefact as a participant in multiple contexts over time so that the interactions and dependencies between the regions and the building can be adequately explored in the design process requires support for the modeling of regional areas, as well as the artefact and the related life cycle processes. Using computational design and evaluation tools can provide the computing capability required for effective design decision support. This paper presents the implementation of the affordance impact assessment method and the regional environmental simulation in Ecologue. Ecologue is the computational tool for life cycle environmental impact assessment in the SEMPER integrated building design and simulation system. Ecologue contains a building model and an environmental model. The building model is automatically derived from the shared building model of the SEMPER system. The environmental model is a combination of a representation of the processes and emissions occurring in the life cycle of buildings and an impact assessment model. The impact assessment model is a combination of a context model of the physical characteristics of a region and a sub-regional fate and transport model based on the fugacity concept.
keywords	Environmental Simulation, Design Decision Support, Life Cycle Analysis
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	ijac202119310
id	ijac202119310
authors	Schwartz, Yair; Raslan, Rokia; Korolija, Ivan; Mumovic, Dejan
year	2021
title	A decision support tool for building design: An integrated generative design, optimisation and life cycle performance approach
source	International Journal of Architectural Computing 2021, Vol. 19 - no. 3, 401–430
summary	Building performance evaluation is generally carried out through a non-automated process, where computational models are iteratively built and simulated, and their energy demand is calculated. This study presents a computational tool that automates the generation of optimal building designs in respect of their Life Cycle Carbon Footprint (LCCF) and Life Cycle Costs (LCC). This is achieved by an integration of three computational concepts: (a) A designated space-allocation generative-design application, (b) Using building geometry as a parameter in NSGA-II optimization and (c) Life Cycle performance (embodied carbon and operational carbon, through the use of thermal simulations for LCCF and LCC calculation). Examining the generation of a two-storey terrace house building, located in London, UK, the study shows that a set of building parameters combinations that resulted with a pareto front of near-optimal buildings, in terms of LCCF and LCC, could be identified by using the tool. The study shows that 80% of the optimal building’s LCCF are related to the building operational stage (o= 2), while 77% of the building’s LCC is related to the initial capital investment (o= 2). Analysis further suggests that space heating is the largest contributor to the building’s emissions, while it has a relatively low impact on costs. Examining the optimal building in terms compliance requirements (the building with the best operational performance), the study demonstrated how this building performs poorly in terms of Life Cycle performance. The paper further presents an analysis of various life-cycle aspects, for example, a year-by-year performance breakdown, and an investigation into operational and embodied carbon emissions.
keywords	Generative design, genetic algorithms, thermal simulation, life cycle, carbon, LCA, NSGA-II, building performance
series	journal
email
last changed	2024/04/17 14:29

_id	ascaad2023_011
id	ascaad2023_011
authors	Shu, Kun; Bao, Ding; Feng, Zhuo; Liu, Zhi
year	2023
title	A Hybrid Generative Design Method for Optimizing Energy Efficiency in Complex Built Environments
source	C+++: Computation, Culture, and Context – Proceedings of the 11th International Conference of the Arab Society for Computation in Architecture, Art and Design (ASCAAD), University of Petra, Amman, Jordan [Hybrid Conference] 7-9 November 2023, pp. 847-862.
summary	Architectural design issues in Complex Built Environments have drawn significant attention from contemporary architects. In the conceptual design phase, previous architectural design methods only accentuate the form and function of the design outcome while neglecting whether the result meets the energy efficiency specifications in the current built environment. Therefore, discovering a new method of architectural design by considering the impact of different design elements/modules on the whole life cycle of the building would meet the need for energy efficiency and emission reduction. This paper serves as a demonstration, utilizing the future Faculty of Architecture, Building and Planning (ABP) building at the University of Melbourne’s Fishermans Bend innovation campus as a prime example, to evaluate the effectiveness of the SimScale Workbench in creating an energy-efficient parametric building information model and generating Integrated Environmental Solution (IES) simulations to analyze the changes in the energy consumption ratio throughout the whole year. By proposing indoor performance targets based on wind and thermal environment analysis, Architects could use hybrid generative building design methods to formulate design strategies for the complex-built environment from an energy efficiency-driven perspective.
series	ASCAAD
email
last changed	2024/02/13 14:34

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	3c98
authors	Mahdavi, Ardeshir and Ries, Robert
year	2003
title	Habitat patterns and their environmental implications
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	This paper deals with the evaluation of the environmental implication of the built environment. Specifically, it argues in favor of evaluative strategies that transcend single-criteria object-focused thinking.
keywords	Habitat; Environment; Life-cycle; Evaluation
series	other
email
last changed	2003/03/11 20:39

_id	sigradi2003_017
id	sigradi2003_017
authors	Massoni, S., Bussi, A. and Ruggeri, S.
year	2003
title	Proyecto de educación ambiental sobre residuos urbanos (Project on environmental education about urban residues)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	This project was chosen from the first drafts Concourse of environmental education for the design of a multimedia interactive cd for pupils and a manual for teachers, asked by the Municipality of Rosario-GTZ, Deutsche Gesellschaft Technische Zusammenarbeit GmbH (German Technical Co-operation for Development). The project articulates these two communication resources as self-learning educational tools for the second cycle of Basic General Teaching (EGB) of Argentina. These communication tools are centred in the thematic axis of the management of urban residues. The project considers schools as central social actors in promotion of proactive, sensible and responsible behaviour for a socially integrated conception of the environmental quality of the city.
keywords	Environmental communication, multimedia, self-learning
series	SIGRADI
email
last changed	2016/03/10 09:55

For more results click below: