Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 15967

Reformat results as: short short into frame detailed detailed into frame

_id	ddss2006-hb-235
id	DDSS2006-HB-235
authors	K. Zhou, A. Kondo, A. Cartagena Gordillo, and K. Watanabe
year	2006
title	A Comparison Study of the Allocation Problem of Undesirable Facilities Based on Residential Awareness - A case study on waste disposal facility in ChengDu City, Sichuan China
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 235-250
summary	The purpose of this paper is to propose a model, which can be used for allocation planning of undesirable facilities by analysing citizen's awareness. As the endurance distance is regarded as a variable, the relation between the distance from the residential location to a waste facility and residential endurance rate is a problem of probability and statistics. Three kinds of stochastic methods are compared in this study.
keywords	Facility location, Undesirable facilities, Stochastic method, ChengDu City
series	DDSS
last changed	2006/08/29 12:55

_id	ecaade2013_205
id	ecaade2013_205
authors	K_nayo_lu, Gökhan
year	2013
title	A Novel Method for Revolved Surface Infrastructures
doi	https://doi.org/10.52842/conf.ecaade.2013.2.297
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 297-303
summary	This paper presents an algorithm for the formation of single or double curved revolved surface’s infrastructures through standardized parts. Any revolved surface can be generated with only two types of parts, interconnected by a ribbed structure technique. The proposed method differs from the accustomed orthogonal rib structures by the varying angle in-between coupling parts. The algorithm can be customized through several parameters like the number, width of parts and thickness of the material used for the infrastructure. The algorithm also offers an advantageous nesting pattern with minimum loss of material regardless of the revolved surface cross-section.
wos	WOS:000340643600030
keywords	Revolved surface; standardization; ribbed structure; contouring; nesting pattern.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	2005_565
id	2005_565
authors	Kabata, Michal and Koszewski, Krzysztof
year	2005
title	A Model of Dispersed Historic Architectural Knowledge Base
doi	https://doi.org/10.52842/conf.ecaade.2005.565
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 565-572
summary	This paper is based on the experience with creation of a small knowledge base about the between-war architecture of one of the Warsaw districts. Design, as a process of creation, combines processing of procedural and declarative knowledge. There is a vast amount of declarative knowledge of different kinds to be collected even before the design process starts. Advances in ICT (Information and Communications Technologies), particularly in such field as databases, data warehousing and knowledge engineering, make it a lot easier to design complex systems, which will allow to combine procedural and declarative knowledge. We used historic-architectural knowledge as an example of the second kind mentioned here. The sources of this kind of information are dispersed, the data is gathered in various formats, using different standards and for various purposes. Past experiences with creating detailed architectural heritage inventories in Poland led us to a conclusion that such a subject specific knowledge base may be a part of larger hierarchical structure, which still needs to be built. These are the reasons for adopting a data-warehouse-like structure, which responds with it’s tools to such needs. The assumptions for such system are presented and the context-based structure is discussed. During our work we also came for some more general conclusions. These concern a need for disseminating an OpenSource Society ideas through all the keepers of information related to architectural heritage.
keywords	Information and Knowledge Management, Database Systems, Architectural Heritage, Data Warehouse Technology
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2021_70
id	sigradi2021_70
authors	Kabošová, Lenka, Chronis, Angelos, Galanos, Theodore and Katunský, Dušan
year	2021
title	Leveraging Urban Configurations for Achieving Wind Comfort in Cities
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 79–90
summary	Given the continuous improvements in digital design and analysis tools, designing in line with the environmental conditions can be much more seamlessly integrated into the conceptual design stage. That leads to faster, informed design decisions and, if incorporated into day-to-day practice, to a sustainable built environment. The presented design method, focusing on enhancing the outdoor wind comfort through architecture, leverages wind analysis tools, such as newly-developed InFraRed, verified by other Grasshopper plug-ins, in the urban design process. As shown in the case study, iterating through various design options and evaluating their impact on the wind flow is faster yet precise, leading towards picking the best-performing design alternative in terms of outdoor wind comfort.
keywords	real-time wind predictions, wind comfort, parametric design, CFD analysis, machine learning
series	SIGraDi
email
last changed	2022/05/23 12:10

_id	ijac202220302
id	ijac202220302
authors	Kabošová, Lenka; Angelos Chronis; Theodoros Galanos
year	2022
title	Fast wind prediction incorporated in urban city planning
source	International Journal of Architectural Computing 2022, Vol. 20 - no. 3, pp. 511–527
summary	Digital design and analysis tools are continually progressing, enabling more seamless integration of climatic impacts into the conceptual design stage, which naturally means enhanced environmental performance of the final designs. Planning sustainable urban configurations and, consequently, environment-derived architectural forms becomes more rapid and requires less effort enabling smooth incorporation into day-to-day practice. This research paper presents a wind prediction-based architectural design method for improving outdoor wind comfort through urbanism and architecture. The added value of the environment-driven design loop consisting of parametric design, wind flow analysis, and necessary design modifications lies in leveraging the newly developed wind prediction tool InFraRed. As is demonstrated in the application study in Kosice, Slovakia, iterating through various design options and evaluating their impact on the wind flow is swift and reliable. That enables the designer to explore the best-performing design alternatives for outdoor wind comfort, yet the extra time required for the analysis is negligible
keywords	real-time wind predictions, wind comfort, parametric design, computational fluid dynamics analysis, machine learning, infrared
series	journal
last changed	2024/04/17 14:29

_id	ijac20053205
id	ijac20053205
authors	Kacher, Sabrina; Halin, Gilles; Bignon, Jean-Claude; Humbert, Pascal
year	2005
title	A method for Constructing a Reference Image Database to Assist with Design Process. Application to the Wooden Architecture Domain
source	International Journal of Architectural Computing vol. 3 - no. 2, 227-244
summary	Designing architectural projects requires the introduction of references, because design is an activity oriented towards a result which does not yet exist. If we summarise the current categories used in Artificial Intelligence to characterise the different forms of reasoning, we are able to consider that design is more the concern of the induction or the abduction mechanism than the deduction mechanism. Moreover, the main characteristic of the designer's activity is to work towards non-routine situations with the use of many references. In this paper we will present method principles to construct a reference image database. These references will enable the designer to further in solving the design problem. To illustrate these reference usage, we choose photographic images belonging to the wooden construction domain We also present at the end of the paper an experiment which aims to evaluate the real help that this reference image database can bring to designers during their creation task.
series	journal
last changed	2007/03/04 07:08

_id	architectural_intelligence2024_32
id	architectural_intelligence2024_32
authors	Kaden Chaudhary, Annika Pan, Hongxi Yin, Ming Qu, Cindy Wang & David Yi
year	2024
title	The PreDI matrix-a common terminology for offsite construction: definition, verification, and demonstration in environmental impact studies
doi	https://doi.org/https://doi.org/10.1007/s44223-024-00069-w
source	Architectural Intelligence Journal
summary	Given the increasing interest in offsite construction and the prefabricated components it produces, this paper aims to establish a common matrix, the PreDI, for the offsite construction industry. The effort is to enhance the comparability of research and practices in offsite construction, making it more universally understood. Offsite construction involves manufacturing components in a factory and then assembling them on-site. It is considered a more sustainable approach due to less material usage, energy consumption, and waste generation during component fabrication. However, the lack of common terminology for offsite construction poses many challenges in the industry and its research, hindering communication and research. The Prefabricated Dimensions and Integrations (PreDI) matrix, developed in the study, provides a solution for industry and research use. Thus, industry and academia can utilize the PreDI widely, accurately, and precisely in communication. This paper demonstrates the PreDI matrix’s application in life cycle assessment research on offsite construction, showcasing its utility and setting the stage for more robust research analyses in the future. Using the PreDI matrix in 24 U.S. Department of Energy Solar Decathlon houses further highlights its potential in the industry. Finally, the paper concludes with a broader outlook on its impacts on offsite construction.
series	Architectural Intelligence
email
last changed	2025/01/09 15:05

_id	ecaade2007_221
id	ecaade2007_221
authors	Kaga, Atsuko ; Miyagawa, Atsushi ; Fukuda, Tomohiro
year	2007
title	Construction of a Participatory Community Space Design System
doi	https://doi.org/10.52842/conf.ecaade.2007.099
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 99-106
summary	Residents’ active participation is necessary for a feasible community design from the planning stage to maintenance and management. it is necessary to show information related to a plan efficiently to facilitate understanding, and to consider a plan in a limited time. The purpose of this study is to develop a Community Space Design system (CSDS) that can use GIS data and Real-time simulation, in order to support comprehension of 3D area information during continuous development. Using CSDS, participants were able to treat various GIS data fixed, and a subject called the division and the disaster prevention of a community, which the object ground is holding can be understood visually on the same 3D space as real space. Because their solution was found, the design was accepted quickly.
keywords	Environmental design, virtual reality, real-time simulation, GIS
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2008_158
id	ecaade2008_158
authors	Kaga, Atsuko; Sugawara, Shihomi
year	2008
title	Research on the Visualization for Analyzing City Changes
doi	https://doi.org/10.52842/conf.ecaade.2008.939
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 939-944
summary	To perceive such changes of city space visually, a three-dimensional (3D) city space model is effective. The use of buildings in a city space is complex, reflecting the number of stories, and the number of stories in many cases. Furthermore, environmental parameters, such as opening a shop developed for conditions of the location, the existence of a building which is easy to divert to some other purpose, a managerial layer, and the whole country, is closely related to city change. A city change can be analyzed from various perspectives if such information can also be accumulated and displayed. If it is expressed in two dimensions, it will be restricted, but if expressed in 3D, the use situation of city space can be grasped quickly. Commercial 3D GIS software is useful for visualizing such a 3D city space model while referring to attribute information. However, such software is expensive and its use is restricted. For this study, highly extensible 3D modeling software is used to develop a technique for visualizing city spaces using its attribute information. Then the developed script is applied to an actual city model in Japan.
keywords	City Analysis, Urban design, 3D-model, City Visualization
series	eCAADe
email
last changed	2022/06/07 07:52

_id	cdc2008_181
id	cdc2008_181
authors	Kaijima, Sawako and Panagiotis Michalatos
year	2008
title	Simplexity, the programming craft and architecture production
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 181-194
summary	In resent years, digital design tools have become prevalent in the design community and their capabilities to manipulate geometry have grown into a trend among architects to generate complex forms. Working as computational design consultant in an engineering firm, between architecture and engineering we often come across the problems generated by a superficial use of digital tools in both disciplines and the incapacity of the current system to cope with their byproducts. Here we will discuss the problems we see with the current system and the opportunities opened by digital design tools. Two guiding concepts are simplexity [the desire to fine tune and build a system that yields a solution to a specific design problem by collapsing its inherent complexity] and defamiliarization [a side effect of having to represent things as numbers]. They can both affect the designer as an individual who chooses to engage with digital media as well as the production system in which he/she is embedded since he/she will have to find new channels of communication with other parties. To demonstrate our strategy and the obstacles faced we will examine our involvement in the development of a computational design solution for a small house designed by Future Systems architects.
email
last changed	2009/01/07 08:05

_id	ecaade2007_177
id	ecaade2007_177
authors	Kaijima, Sawako; Michalatos, Panagiotis
year	2007
title	Discretization of Continuous Surfaces as a Design Concern
doi	https://doi.org/10.52842/conf.ecaade.2007.901
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 901-908
summary	The increasing trend in architecture to create unconventional forms opened up a new area of investigations in the employment of computational methods in design and construction. Our investigation is undertaken within a structural engineering firm, Adams Kara Taylor and focuses on finding ways to design structural solutions that respect criteria of efficiency, architectural intentions as well as intrinsic properties of the geometry. In this paper, we present various approaches on discretization where a project is presented as a continuous form, envelope or skin that must be subsequently subdivided in order to yield a framing or cladding solution compatible with different manufacturing, design and engineering considerations. The first part of this paper illustrates such a project where we applied and developed one of our discretization approaches. The second part of the paper focuses on generalization where we present a series of methodologies and corresponding software tools developed for the purpose.
keywords	Discretization, framing solution, structural analysis
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2008_032
id	ecaade2008_032
authors	Kaijima, Sawako; Michalatos, Panagiotis
year	2008
title	Computational Design Consultancy
doi	https://doi.org/10.52842/conf.ecaade.2008.311
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 311-318
summary	The pervasiveness of the digital media has set the ground for tighter collaboration between the discipline involved in the architecture practice and potential for reconfiguring the well-established communication patterns in the industry to occur. Considering the context thereof, Computation Design Consultancy aims to connect different considerations and priorities raised by different parties involved in the architecture production system by means of digital computation. Here, we discusses the inefficiency of the existing system in engaging with the contemporary context influenced by the digital media as well as our approaches and findings thus far though the consultancy work.
keywords	Consultancy, Communication, Interactive Software
series	eCAADe
email
last changed	2022/06/07 07:52

_id	69aa
authors	Kaku, Bharat K. and Thompson, Gerald L.
year	1983
title	An Exact Algorithm for the General Quadratic Assignment Problem
source	December, 1983. 18 P. includes bibliography
summary	The authors develop an algorithm that is based on the linearizaition and decomposition of a general Quadratic Assignment Problem of size n into n2 Linear Assignment problems of size (n-1). The solutions to these subproblems are used to calculate a lower bound for the original problem, and this bound is then used in an exact branch and bound procedure. These subproblems are similar to the 'minors' defined by Lawler, but allow calculation of tighter bounds. Computational experience is given for solution to optimization of problems of size up to n = 10
keywords	algorithms, branch-and-bound, operations research, linear programming
series	CADline
last changed	2003/06/02 10:24

_id	ascaad2023_032
id	ascaad2023_032
authors	Kalak, Dogan; Aydin, Serdar; Özer, Derya
year	2023
title	Use of Generative Systems to Create Semi-Public Spaces in Contemporary Neighborhood Texture
source	C+++: Computation, Culture, and Context – Proceedings of the 11th International Conference of the Arab Society for Computation in Architecture, Art and Design (ASCAAD), University of Petra, Amman, Jordan [Hybrid Conference] 7-9 November 2023, pp. 306-323.
summary	Cul-de-sacs are examined together with the urban reading in Siverek. Studying cul-de-sacs is instrumental to understand the morphology of Islamic cities. Cul-de-sacs provide a buffer zone between main roads and houses. For this reason, both the privacy phenomenon, which is one of the important issues for Islam, and the safe space need of the residents are important spatial elements. Until 1968, the city of Siverek developed organically within a compact texture of narrow and curvilinear streets, open courtyards, and a adjacent high-walled residences. In this texture, many semi-private cul-de-sacs have an organic form, which is one of the critical spatial elements of the city. Residential walls or courtyard walls form the natural line of traditional streets. In this study, typological analyses of cul-de-sacs were made, and form grammar, a productive method used to analyze architectural language, is included. It aims to examine the relationship between residential settlement and street using the data set created with shape grammars and to make urban propositions for neighbourhood structures in the context of a cul-de-sac using L-systems in the next step. Some parameters have been determined in forming cul-de-sacs that form the urban texture. These parameters were transferred to the model using digital tools. A method thought to be used in urban production has been put forward. The most important reference of this method is dead-end streets.
series	ASCAAD
email
last changed	2024/02/13 14:34

_id	caadria2017_165
id	caadria2017_165
authors	Kalantar, Negar, Borhani, Alireza and Akleman, Ergun
year	2017
title	A Simple Fabrication System for Unfolding Complex Architectural Surfaces
doi	https://doi.org/10.52842/conf.caadria.2017.767
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 767-776
summary	In this research, we explore the implementation of panels with a single bending direction as cylindrical surfaces; in so doing, we present our ongoing research, focusing on finding ways to simply and affordably address the problem of constructability of double-curved structures. By encoding 3D freeform surface information into a 2D workflow, our in-house software (named UNFOLDING) breaks down complex mesh structures into a number of discrete and flat quadrilaterals that can be translated into a fabrication layout. UNFOLDING provides a practical way of linking the process of production and assembly to freeform architectural design. After introducing UNFOLDING in two design studios at Texas A&M University, freshman architecture students used laser-cut quadrilateral panels to design and construct several complex forms with positive or negative Gaussian curvatures.
keywords	Complex architectural surfaces; digital fabrication; quad-edge panels; unfolding; 2-manifold meshes
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2017_301
id	ecaade2017_301
authors	Kalantari, Saleh and Ghandi, Mona
year	2017
title	Data-responsive Architectural Design Processes
doi	https://doi.org/10.52842/conf.ecaade.2017.2.503.2
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 503-512
summary	Current advancements in information technology and mechanical components offer incredible new possibilities for innovation in architecture. Many aspects of our physical environment are becoming integrated with information systems, a phenomenon that has been referred to as the "Internet of Things." The implications and applications of this technology are far-reaching, and students who are learning about design in today's environment have a bewildering array of new tools available for their exploration. This paper reviews some of the central concepts of contemporary data-driven design, and describes how these concepts can be used in a pedagogical framework to encourage student innovation. The authors provide details about their work with students in IDR Studios, and highlight some of the innovative design solutions created by students using information-based toolsets. This research provides a pedagogical framework for helping design students to engage with new technological resources as they work to develop the architectural intelligence.
keywords	Adaptive Systems; Internet of Things; Big Data; Data Driven Design Process
series	eCAADe
email
last changed	2022/06/07 07:52

_id	54cc
authors	Kalawsky, R.
year	1993
title	The Science of Virtual Reality and Virtual Environments
source	Addison-Wesley, Cambridge, UK
summary	This book goals hits basic idea: giving a review on Virtual Reality and on the theory at its basis. Starting from history, going trought science as medicine, arriving at technical stuff this is in syntesis this book. For everyone interested in "How it work?". Only one problem : sometimes is too difficoult to understand at no graduate persons dues to hi level techincal explanations in particoular in display chapter
series	other
last changed	2003/04/23 15:14

_id	4248
authors	Kalay, Y.E. and Skibniewski, M.J.
year	1995
title	Automation in Construction: Fulfilling the promise
source	Automation in Construction 4 (1) (1995) pp. 1-3
summary	Three years ago, Elsevier Science B.V. has embarked on one of the most important endeavors for the A/E/C community, worldwide. With the help of three dedicated individuals, it has inaugurated a new refereed journal devoted to discussing, critically examining and disseminating the latest developments affecting the processes that lead to the design, construction and use of buildings and other facilities. Unlike other jour-nals in this field, Automation in Construction has been dedicated to exploring the processes and tools used by the A/E/C community, rather than its products. It has been dedicated to issues concerning the A/ E / C community specifically, and to methods, practices and tools that make use of computers in particular, thereby filling a void which existed, until its inauguration, within the A/E/C community's publications.
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/06/02 09:30

_id	3d2f
authors	Kalay, Y.E., Khemlani, L. and JinWon, C.
year	1998
title	An integrated model to support distributed collaborative design of buildings
source	Automation in Construction 7 (2-3) (1998) pp. 177-188
summary	The process of designing, constructing and managing buildings is fragmented, and involves many participants interacting in complex ways over a prolonged period of time. Currently, sequential communication among the participants is the norm. Consequently, while individual parts of the project may be optimized, the optimality of the overall project suffers. It is our view that the quality of the overall project can be significantly improved (in terms of time, money, and quality of design) if there was a tighter, non-sequential collaboration among the participants. Additional improvements will accrue if the participants were provided with discipline-specific design and evaluation tools, which assist them in performing their tasks. This paper describes the development of an integrated design environment, which is intended to facilitate such collaboration. It comprises a semantically-rich, object-oriented database, which forms the basis for shared design decisions. The database is augmented by knowledge-based query and update operators. Geometric and semantic editing tools round out the environment.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	4f90
authors	Kalay, Y.E.
year	1998
title	P3: Computational environment to support design collaboration
source	Automation in Construction 8 (1) (1998) pp. 37-48
summary	The work reported in this paper addresses the paradoxical state of the construction industry (also known as A/E/C, for Architecture, Engineering and Construction), where the design of highly integrated facilities is undertaken by severely fragmented teams, leading to diminished performance of both processes and products. The construction industry has been trying to overcome this problem by partitioning the design process hierarchically or temporally. While these methods are procedurally efficient, their piecemeal nature diminishes the overall performance of the project. Computational methods intended to facilitate collaboration in the construction industry have, so far, focused primarily on improving the flow of information among the participants. They have largely met their stated objective of improved communication, but have done little to improve joint decision-making, and therefore have not significantly improved the quality of the design project itself. We suggest that the main impediment to effective collaboration and joint decision-making in the A/E/C industry is the divergence of disciplinary `world-views', which are the product of educational and professional processes through which the individuals participating in the design process have been socialized into their respective disciplines. To maximize the performance of the overall project, these different world-views must be reconciled, possibly at the expense of individual goals. Such reconciliation can only be accomplished if the participants find the attainment of the overall goals of the project more compelling than their individual disciplinary goals. This will happen when the participants have become cognizant and appreciative of world-views other than their own, including the objectives and concerns of other participants. To achieve this state of knowledge, we propose to avail to the participants of the design team highly specific, contextualized information, reflecting each participant's valuation of the proposed design actions. P3 is a semantically-rich computational environment, which is intended to fulfill this mission. It consists of: (1) a shared representation of the evolving design project, connected (through the World Wide Web) to (2) individual experts and their discipline-specific knowledge repositories; and (3) a computational project manager makes the individual valuations visible to all the participants, and helps them deliberate and negotiate their respective positions for the purpose of improving the overall performance of the project. The paper discusses the theories on which the three components are founded, their function, and the principles of their implementation.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

For more results click below: