Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 4525

Reformat results as: short short into frame detailed detailed into frame

_id	ddss2006-pb-101
id	DDSS2006-PB-101
authors	Aloys W.J. Borgers, I.M.E. Smeets, A.D.A.M. Kemperman, and H.J.P. Timmermans
year	2006
title	Simulation of Micro Pedestrian Behaviour in Shopping Streets
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 101-116
summary	Over the years, scholars have developed various models of pedestrian movement. These models can be used to assess the effects of detailed design decisions or to predict pedestrian behaviour under conditions of crowding. To date, not much attention has been paid to pedestrians' shopping behaviour at the micro level. Therefore, the main purpose of this project is to test a model that aims at simulating micro pedestrian behaviour in shopping streets, including entering shops. The model assumes a detailed network of links to represent the structure of street segments and entrances to the shops. The basic principle underlying the model is that a pedestrian moves from one link in the network to another, adjacent link. In fact, a pedestrian enters a segment at one side, heading for the other side of the segment. However, a pedestrian might enter the segment by leaving a shop as well. Then, the pedestrian might be heading for either side of the segment. While transferring from the current link to the next link, the pedestrian will be attracted by the shops along both sides of the street. The study area is Antwerp's main shopping street. During a one-week workshop in July 2004, students observed pedestrian movement in this shopping street. An inventory of some physical characteristics of the shopping street was made and pedestrians were tracked through two separate segments of the shopping street. In total, 334 pedestrians were tracked. A conventional multinomial logit model is used to simulate pedestrians' micro behaviour. The process of consecutively selecting links continues until the pedestrian has reached one of the terminal links or a shop. The model performs very well. Simulated routes were used to assess the validity of the model. Observed and simulated link loading correspond fairly well, however, the model seems to slightly mispredict the attraction of a number of shops.
keywords	Micro pedestrian behaviour, Shopping street, Simulation
series	DDSS
last changed	2006/08/29 12:55

_id	caadria2017_182
id	caadria2017_182
authors	Austin, Matthew
year	2017
title	The Other Digital - What is the Glitch in Architecture?
doi	https://doi.org/10.52842/conf.caadria.2017.551
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 551-559
summary	This paper will discuss and investigate the issues with the concept of 'glitch' in architecture. There are currently two definitions that sit in a symbiotic relationship with each other; Moradi's (2004) and Menkman's (2011). This paper will explore the implications of these two approaches, while investigating the possibility of a third, unique definition (the encoded transform), and what effect they have on the possibility for a 'glitch architecture'. The paper will then focus on the glitches' capacity to be disruptive within the design process. In the context of architecture, it has been previously argued that the inclusion of glitches within a design process can easily create a process that does not 'converge' to a desired design outcome, but instead shifts haphazardly within a set of family resemblances (Austin & Perin 2015). Further to this, it will be revealed that this 'divergent' quality of glitches is due to the encoded nature of architectural production.
keywords	Glitch aesthetics; Theory; Algorithmic Design; Process.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ddss2004_ra-279
id	ddss2004_ra-279
authors	Bax, M.F.Th. and H.M.G.J. Trum
year	2004
title	On the Notion of Level in Architecture
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 279-292
summary	The notion of Level (in a scale of Levels) is probably the most authentic notion in Architecture. Already in the work of Vitruvius the notion is implicitly present in the triad ‘ordinatio – symmetria – eurythmia’. In more recent times, the notion always appears in relation with hierarchical organization as a means of control of quality. However used in drawings and in architectural discourse, the term lacks precision; there are many types of level like abstraction, specification, dependency, resolution levels etc., but no operational definition can be found as a notion that structures architectural objects and design processes simultaneously in a consistent way. Defining this notion of Level is the purpose of this paper. An example of application in an architectural decision-making process completes the paper.
keywords	Levels, Hierarchy, Architecture, Composition, Complexity, Control
series	DDSS
last changed	2004/07/03 22:13

_id	2004_312
id	2004_312
authors	Burry, J., Felicetti, P., Tang, J., Burry, M. and Xie, M.
year	2004
title	Dynamical Structural Modeling - A Collaborative Design Exploration
doi	https://doi.org/10.52842/conf.ecaade.2004.312
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 312-317
summary	This paper will report on a generative performative modeling approach that engages architects and structural engineers in close dialog. We focus on knowledge shared between architects and engineers to apply the Finite Element Analysis based structural design technique Evolutionary Structural Optimization [ESO] as a way to understand or corroborate the performance factors that are significant in determining architectural form. ESO is very close conceptually to the dynamical system of matter and forces of growth itself. It has parallels both mathematical and metaphorical with natural evolution and morphogenesis so it has been poignant to apply the approach to a formal architectural case study in which the generative influence of these processes is inherent.
keywords	Evolutionary Structural Optimization; Finite Element Analysis; Architect Engineer Collaboration; Performance-Based Design; Form Finding
series	eCAADe
last changed	2022/06/07 07:54

_id	ddss2004_ra-33
id	ddss2004_ra-33
authors	Diappi, L., P. Bolchim, and M. Buscema
year	2004
title	Improved Understanding of Urban Sprawl Using Neural Networks
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 14020-2408-8, p. 33-49
summary	It is widely accepted that the spatial pattern of settlements is a crucial factor affecting quality of life and environmental sustainability, but few recent studies have attempted to examine the phenomenon of sprawl by modelling the process rather than adopting a descriptive approach. The issue was partly addressed by models of land use and transportation which were mainly developed in the UK and US in the 1970s and 1980s, but the major advances were made in the area of modelling transportation, while very little was achieved in the area of spatial and temporal land use. Models of land use and transportation are well-established tools, based on explicit, exogenouslyformulated rules within a theoretical framework. The new approaches of artificial intelligence, and in particular, systems involving parallel processing, (Neural Networks, Cellular Automata and Multi-Agent Systems) defined by the expression “Neurocomputing”, allow problems to be approached in the reverse, bottom-up, direction by discovering rules, relationships and scenarios from a database. In this article we examine the hypothesis that territorial micro-transformations occur according to a local logic, i.e. according to use, accessibility, the presence of services and conditions of centrality, periphericity or isolation of each territorial “cell” relative to its surroundings. The prediction capabilities of different architectures of supervised Neural networks are implemented to the south Metropolitan area of Milan at two different temporal thresholds and discussed. Starting from data on land use in 1980 and 1994 and by subdividing the area into square cells on an orthogonal grid, the model produces a spatial and functional map of urbanisation in 2008. An implementation of the SOM (Self Organizing Map) processing to the Data Base allows the typologies of transformation to be identified, i.e. the classes of area which are transformed in the same way and which give rise to territorial morphologies; this is an interesting by-product of the approach.
keywords	Neural Networks, Self-Organizing Maps, Land-Use Dynamics, Supervised Networks
series	DDSS
last changed	2004/07/03 22:13

_id	eaea2003_27-firsov
id	eaea2003_27-firsov
authors	Firsov, A.I.
year	2004
title	Using Video and Computer Technologies for the Appreciation of the Integral Beauty of Architectural Objects
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 135-137
summary	The paper is devoted to finding the aesthetic value of architectural objects and it is the continuation of works /1/ and /2/ executed before. In those the following concepts had been developed: a) dot estimation of beauty of an architectural object; b) function of beauty, c) integrated estimation of beauty of an architectural object. // The integrated estimation of beauty doesn t depend upon the choice of a point of observation and can serve as an objective measure of beauty of an architectural object.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ijac20042405
id	ijac20042405
authors	Heitor, Teresa V.; Duarte, José P.; Pinto, Rafaela M.
year	2004
title	Combing Grammars and Space Syntax: Formulating, Generating and Evaluating Designs
source	International Journal of Architectural Computing vol. 2 - no. 4, 492-515
summary	This paper is concerned with how two different computational approaches to design – shape grammars and space syntax – can be combined into a single common framework for formulating, generating, and evaluating designs. The main goal is to explore how the formal principles applied in the design process interact with the spatial properties of the designed objects. Results suggest that space syntax is (1) useful in determining the universe of solutions generated by the grammar and (2) in evaluating the evolving designs in terms of spatial properties and, therefore, in guiding the generation of designs.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	ddss2004_d-291
id	ddss2004_d-291
authors	Hensen, J.L.M.
year	2004
title	Towards More Effective Use of Building Performance Simulation in Design
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 291-306
summary	This paper discusses some issues which hinder effective use of building performance simulation in building design, and some approaches towards better and more efficient use of this important but underutilized technology. In particular, the paper discusses the issues of quality assurance, the relative slow software developments and the limited use (usability) of building performance simulation mainly during the final stages of the building design process.
keywords	Building Performance Simulation, Design Support
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2004_d-111
id	ddss2004_d-111
authors	Kitazawa, K. and M. Batty
year	2004
title	Pedestrian Behaviour Modelling
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 111-126
summary	This paper introduces a study of pedestrian behaviour modelling which incorporates ideas about agent-based systems and the traffic models based on the utility-maximization theory. The aim of this study is to examine the applicable scope of one of the basic assumptions in existing spatial behaviour models; the route with shortest distance maximizes the utility of each pedestrian’s travel. Although shortest-path models have been widely used in the field of Traffic management to predict routing behaviour, there can be seen a lot of erratic behaviour in urban areas, shopping migration behaviour for instance, which can not be explained by them. Thus, it is important to identify other possible influential factors on their utility maximization process in order to develop more explicable models of pedestrian movements. In this study, we implemented a simulation model using the shortest-path model as one of evaluation criteria of Genetic Algorithms (GA) to computationally emulate retail movements of shoppers in a big shopping centre and to test the accuracy of the model by comparison between the routes estimated by the model and actual trajectories of shoppers. This simulation system will be used as a platform for further modelling.
keywords	Pedestrian Modelling, Retail Movement, Shortest-Path, Genetic Algorithms
series	DDSS
last changed	2004/07/03 22:13

_id	eaea2003_23-kubinsky-kardos
id	eaea2003_23-kubinsky-kardos
authors	Kubinsky, B. and Kardos, P.
year	2004
title	Completion of the Public Area of the Bratislava Main Station using Fine Art Components
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 113-115
summary	The project deals with supplementation of fine art components to the newly designed square in front of the main railway station and their integration into the public space to provide a good system functioning in the contemporary ground-floor level. Several students of Faculty of Architecture, Slovak University of Technology in Bratislava, have elaborated this idea under the leadership of B. Kubinsky with the technical support of P. Kardos during the years 2001 and 2002. The supplementation had been planned in two parts: first each student has designed his own object of art and created the model of his piece. Then, in the second part, the quality and relevance of each object was verified by the spatial endoscope in the laboratory of P. Kardos.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	ddss2004_ra-341
id	ddss2004_ra-341
authors	Murakami, M., K. Higuchi, and A. Shibayama
year	2004
title	Relationship between Convenience Store Robberies and Road Environment
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 341-356
summary	This study focuses on road environment around robbed convenience stores and elucidates the road characteristics that are conducive to convenience store robberies by using GIS and indexes of graphs and networks. The method of this study is as follows: Five convenience store robberies, which occurred in Metropolitan Tokyo, were selected from newspaper reports. Then, road networks within a 1-kilometer radius of the robbed convenience stores were extracted from digital maps with a scale of one-twenty five hundredth (Geographical Survey Institute and Bureau of City Planning Tokyo Metropolitan Government). After adding the road networks and the attributes such as road width, we investigate the road characteristics using GIS and indexes of graphs and networks. Finally, we demonstrate several factors associated with convenience store robberies based on this compiled information.
keywords	Convenience Store Robbery, GIS, Graph Theory, Indexes of Graphs and Networks
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2004_ra-193
id	ddss2004_ra-193
authors	Ohgai, A., Y. Gohnai, S. Ikaruga, M. Murakami, and K. Watanabe
year	2004
title	Japan Cellular Automata Modeling for Fire Spreading as a Tool to Aid CommunityBased Planning for Disaster Mitigation
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 193-209
summary	As a tool to support collaboration in community-based planning for disaster mitigation in Japanese old wooden built-up areas, we attempt to develop a fire spreading simulation model incorporated a fire fighting activity using Cellular Automata (CA). The proposed model can deal with the process of fire spreading in a building that traditional models can not represent. Whether or not fire can spread is based on a stochastic calculation process to reproduce uncertain fire spreading. The errors caused by the stochastic factor are analyzed by carrying out simulation two or more times under the same condition. Moreover, the reproductivity of the model is examined by comparing simulation results with actual fire records.
keywords	Community-Based Planning for Disaster Mitigation, Fire Spreading, Fire Fighting Activity, Cellular Automata Modeling, Planning Support Tool
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2004_ra-213
id	ddss2004_ra-213
authors	Penn, A., C. Mottram, A. Fatah gen. Schieck, M. Wittkämper, M. Störring, O. Romell, A. Strothmann, and F. Aish
year	2004
title	AUGMENTED REALITY MEETING TABLE: A NOVEL MULTI-USER INTERFACE FOR ARCHITECTURAL DESIGN
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 213-231
summary	Immersive virtual environments have received widespread attention as providing possible replacements for the media and systems that designers traditionally use, as well as, more generally, in providing support for collaborative work. Relatively little attention has been given to date however to the problem of how to merge immersive virtual environments into real world work settings, and so to add to the media at the disposal of the designer and the design team, rather than to replace it. In this paper we report on a research project in which optical see-through augmented reality displays have been developed together with prototype decision support software for architectural and urban design. We suggest that a critical characteristic of multi user augmented reality is its ability to generate visualisations from a first person perspective in which the scale of rendition of the design model follows many of the conventions that designers are used to. Different scales of model appear to allow designers to focus on different aspects of the design under consideration. Augmenting the scene with simulations of pedestrian movement appears to assist both in scale recognition, and in moving from a first person to a third person understanding of the design. This research project is funded by the European Commission IST program (IST-2000-28559).
keywords	Design Collaboration, Tangible Interface, Gesture, Agent Simulation, Augmented Reality
series	DDSS
type	normal paper
last changed	2004/07/03 23:11

_id	ddss2004_d-49
id	ddss2004_d-49
authors	Polidori, M. and R. Krafta
year	2004
title	Environment – Urban Interface within Urban Growth
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 49-62
summary	This work presents the synthesis of a model of urban growth dedicated to accomplish simulations of urban spatial dynamics, based on integrated urban and environmental factors and promoting simultaneity among external and internal growth. The city and surrounding environment are captured and modeled in computational ambient, by application of the centrality / potential model (Krafta, 1994 and 1999), with support of graph theory, cellular automata, GIS and geocomputation. The model assumes the city as a field of opportunities for obtaining income, mediated by the space, which is composed of urban and environmental attributes, that work as attractors or as resistances for the urban growth. The space configuration and the distribution of those attributes generate tensions that differentiate qualitatively and quantitatively the space, through the centrality measure (built with the support of graphs techniques), coming to provoke growth in places with larger potential of development (built with the help of techniques of CA – cellular automata). Growths above environmental thresholds are considered problems, generated and overcome in the same process of production of the urban space. Iterations of that process offer a dynamic behaviour to the model, allowing to observe the growth process along the time. The model presents several possibilities: a) urban - natural environment integration; b) internal and external growth integration; c) variety in the scale; d) GIS integration and geocomputation; e) user interface; f) calibration; g) theoretical possibilities; and h) practical possibilities.
keywords	Environment, Urban Growth, Urban Morphology, Simulation
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2004_ra-85
id	ddss2004_ra-85
authors	Shen, Z.J. and M. Kawakami
year	2004
title	Visualization of Usable Building Space According to Planning Permission Ordinances for Public Participation in District Plan in Japan
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & DecisionSupport Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 85-98
summary	The district plan in Japan is designed and implemented through public participation, which is based on the zone restrictions of land use system. The usable space of a building can be generated according to the zone restrictions implemented in a district plan, which include the planning controls of high altitude, oblique line and so on. Residents can choose control items as their preference in order to control the urban physical environment of the district. In this paper, we discuss how to generate the virtual world according to the data set of GIS including planning control items and how it can work for net participation. In the future, we would like to conduct an Internet social experiment with the cooperation of a city government and residents in order to support the district plan in a local city.
keywords	WEBGIS, JAVA3d, Planning restrictions, Public participation
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2004_d-77
id	ddss2004_d-77
authors	Tangari, L., M. Ottomanelli, and D. Sassanelli
year	2004
title	The Project Planning of Urban Decongestion
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 77-92
summary	This study introduces a methodology for the evaluation, among a set of possible plans and/or policies, of a transport system which could reduce the effects of the network congestion on an urban area. Hence it is proposed a procedure which contains a new element compared with the current methodologies that is the final user’s evaluation of the examined system by turning to the application of the contingent valuation method, a technique like stated preferences. The approach we propose is based on the necessity for a determination of an optimal solution to the urban congestion to be established on the politic acceptability by the final user. Solutions which result virtually feasible for a public administration both on a technique and economic point of view often meet hostility by individuals. Consequently, it would be interesting for policy makers to adopt a process of valuation which could let to understand the user’s sensitivity and hostility towards specific configurations of the system, chosen as solution to decongestion (traffic calming, roadpricing, auto-free zones) and consequently to make less unpleasant the strategy to be carried out to control congestion (Harrington et al., 2001). In this way, a user does not judge the implementation of a set of projects made by a decision-maker as imposition and he is willing to pay in order to fulfil the chosen scenario. Finally we describe an application of the proposed methodology relating the definition of the integrated transport system in the metropolitan area of Bari, chief town of Apulia.
keywords	Contingent Valuation, Transportation Planning, Urban Decongestion
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2004_d-283
id	ddss2004_d-283
authors	Van Bronswijk, J.E.M.H., L.G.H. Koren, and C.E.E. Pernot
year	2004
title	Adapting Epidemiological Methodologies to the Prediction of Health Effects of Built Environment Interventions
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 283-290
summary	The influence of built environments on vitality and productivity of users is paramount. Since the introduction of Industrial, Flexible and Demountable Building, domotics, smart buildings, in general: mass-produced, intelligent and learning built environments, tailored built environments are within reach. This has resulted in the need for methodologies to predict short-term and long-term health effects of different built-environment constellations. Epidemiology has developed and validated methods to assess changes in prevalence of inflictions and other unhealthy conditions, as well as the number of healthy and vital years in a life span. After analysing the relationships among building (services) parts and its combinations, health determinants (exposures) and health outcomes, we could adapt the healthy years assessment (DALY) to changes in construction (insulation, air tightness) and building services engineering (ventilation, heating) for dwellings under Dutch conditions. The most important conclusion is that natural ventilation, mechanical ventilation and balanced ventilation not only differ in their average health effect, but even more so in the size of the ranges of these effects. Other systems, such as heat pumps or photo voltaic cells are expensive but will become economically applicable when healthcare costs are taken into account. These outcomes gave valuable clues for product innovation and opened the possibility to model health in relation to built environments. The method could also be applied to quality classification systems for dwellings.
keywords	Health Prediction, Built Environment, Epidemiology, Modelling
series	DDSS
last changed	2004/07/03 22:13

_id	avocaad_2003_14
id	avocaad_2003_14
authors	Yolanda Steijns and Alexander Koutamanis
year	2003
title	Information systems for the design and management of transformation in Dutch educational buildings
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	Following a period of little change, new didactic approaches coupled to social and technological developments have recently triggered several fundamental modifications in Dutch secondary education. These modifications have extensive consequences for the accommodation of secondary education. The majority of existing buildings is quite conventional in spatial terms and is characterized by limited flexibility and transformability. The paper is a description of a modular yet coherent information system that supports decision taking concerning the transformation of existing buildings. The system consists of spatial and topological representation of a building and its brief, as well as a matching system that connects the two.The purpose of the system is to support the management of the building transformation by providing appropriate input to design and decision activities, as well as by accommodating their output. This is achieved by providing a responsive context for the analysis and evaluation of design decisions from the major viewpoints and with respect to primary aspects. Continuity is a major consideration in this context: appropriate information and feedback should be available throughout the design and construction process but also after completion (in anticipation of further transformations, as well as for monitoring building performance).
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	ascaad2004_paper14
id	ascaad2004_paper14
authors	Abdel Mohsen, Ashraf M.
year	2004
title	Future Space Cities@Universe (Digi-City Vision)
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	A template for the future city has been carved into the heavens. Ever since the beginning of humankind, we have looked to the sky for the opportunity to make a new start in our imperfect world. Between the stars and the darkness we have imagined utopias beyond the reach of our travel technologies, colonizing space with our fantasies. Now we are in the first stages of an electronic revolution, but in the future 50 years later we will be in a mega-digital era which we have to predict, work and search for the reality of that future. Our planet is recently over loaded with different problems, such as pollution, population, nature disasters. Our vast speed of technology and the curiosity of discovering the invisible, leads to study and find out the nearest Future Space Architecture. With the vast acceleration of technology and digital life, we should start to predict the future architecture on, into or behind the Earth. This paper is one of many perceptions of life and architecture behind the Earth in the digital era, Digi-City Vision.
series	ASCAAD
email
last changed	2007/04/08 19:47

For more results click below: