Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1480

Reformat results as: short short into frame detailed detailed into frame

_id	2004_142
id	2004_142
authors	Achten, Henri, Jessurun, Joran and de Vries, Bauke
year	2004
title	The Desk-Cave - A Low-Cost Versatile Virtual Reality Design and Research Setup Between Desktop and CAVE
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 142-147
doi	https://doi.org/10.52842/conf.ecaade.2004.142
summary	Virtual Reality has become an almost ubiquitous technology in many applications, but it has seen limited success in design support. Reasons for this seem to lie in lack of easily available tools, high threshold for non-programmers, and high cost of equipment. In this paper we describe a Virtual Reality environment that is developed at Design Systems called the Desk-Cave. The Desk-Cave is a low-cost VR setup that combines principles of a CAVE system with a work desk. Architecture students with no specific training in VR technology use the Desk-Cave in design projects both in the early stage and the final presentation stage. The system allows quick transfer to the Desk-Cave and architectural evaluation of design proposals.
keywords	Virtual Reality, Architectural Design, Design Process, Cel Shading
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ddss2004_ra-19
id	ddss2004_ra-19
authors	Akamine, A. and A. Nélson Rodrigues da Silva
year	2004
title	An Evaluation of Neural Spatial Interaction Models Based on a Practical Application
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 19-32
summary	One of the serious problems faced by the Brazilian municipalities is the scarcity of resources for building education infrastructure. This asks for an optimal allocation of the available resources that includes, among other things, a rational spatial arrangement of the supply points (i.e., schools) in order to increase the demand coverage (i.e., students). If it is possible to foresee the regions where the demand is going to be concentrated, it is then possible to plan the location of new facilities and to assess the impact on the future level of service of the entire system. Considering that one of the consequences of the location-allocation process is the distribution of trips from demand points to supply points throughout the city, therefore affecting the overall intraurban accessibility conditions to essential services such as education, there is a strong need of models that planners can rely on to predict the future trip distribution patterns. As a result, the objective of this work was to evaluate the performance of Artificial Neural Networks (ANN) when applied to spatial interaction models, the so-called Neural Spatial Interaction Models. This was done in a practical context, in contrast to the more theoretical works commonly found in literature. The practical application showed that the neural spatial interaction model had different performances when compared to the traditional gravity models. In one case the neural models outperformed the gravity models, while on the other case it was just the opposite. The explanation for this may be in the data or in the ANN model formulation, as discussed in the conclusions.
keywords	Artificial Neural Networks, Spatial Interaction Models, Education Infrastructure
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2006-pb-101
id	DDSS2006-PB-101
authors	Aloys W.J. Borgers, I.M.E. Smeets, A.D.A.M. Kemperman, and H.J.P. Timmermans
year	2006
title	Simulation of Micro Pedestrian Behaviour in Shopping Streets
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 101-116
summary	Over the years, scholars have developed various models of pedestrian movement. These models can be used to assess the effects of detailed design decisions or to predict pedestrian behaviour under conditions of crowding. To date, not much attention has been paid to pedestrians' shopping behaviour at the micro level. Therefore, the main purpose of this project is to test a model that aims at simulating micro pedestrian behaviour in shopping streets, including entering shops. The model assumes a detailed network of links to represent the structure of street segments and entrances to the shops. The basic principle underlying the model is that a pedestrian moves from one link in the network to another, adjacent link. In fact, a pedestrian enters a segment at one side, heading for the other side of the segment. However, a pedestrian might enter the segment by leaving a shop as well. Then, the pedestrian might be heading for either side of the segment. While transferring from the current link to the next link, the pedestrian will be attracted by the shops along both sides of the street. The study area is Antwerp's main shopping street. During a one-week workshop in July 2004, students observed pedestrian movement in this shopping street. An inventory of some physical characteristics of the shopping street was made and pedestrians were tracked through two separate segments of the shopping street. In total, 334 pedestrians were tracked. A conventional multinomial logit model is used to simulate pedestrians' micro behaviour. The process of consecutively selecting links continues until the pedestrian has reached one of the terminal links or a shop. The model performs very well. Simulated routes were used to assess the validity of the model. Observed and simulated link loading correspond fairly well, however, the model seems to slightly mispredict the attraction of a number of shops.
keywords	Micro pedestrian behaviour, Shopping street, Simulation
series	DDSS
last changed	2006/08/29 12:55

_id	ddss2004_ra-177
id	ddss2004_ra-177
authors	Ballas, D., R. Kingston, and J. Stillwell
year	2004
title	Using a Spatial Microsimulation Decision Support System for Policy Scenario Analysis
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 177-191
summary	This paper discusses the potential of a spatial microsimulation-based decision support system for policy analysis. The system can be used to describe current conditions and issues in neighbourhoods, predict future trends in the composition and health of neighbourhoods and conduct modelling and predictive analysis to measure the likely impact of policy interventions at the local level. A large dynamic spatial micro-simulation model is being constructed for the population of Leeds (approximately 715,000 individuals) based on spatial microsimulation techniques in conjunction with a range of data, including 2001 Census data for Output Areas and sample data from the British Household Panel Survey. The project has three main aims as follows: (i) to develop a static microsimulation model to describe current conditions in Leeds; (ii) to enable the performance of ‘What if?’ analysis on a range of policy scenarios; and (iii) to develop a dynamic microsimulation model to predict future conditions in Leeds under different policy scenarios. The paper reports progress in meeting the above aims and outlines the associated difficulties and data issues. One of the significant advantages of the spatial microsimulation approach adopted by this project is that it enables the user to query any combination of variables that is deemed desirable for policy analysis. The paper will illustrate the software tool being developed in the context of this project that is capable of carrying out queries of this type and of mapping their results. The decision support tool is being developed to support policy-makers concerned with urban regeneration and neighbourhood renewal.
keywords	Spatial Microsimulation, Spatial Decision Support Systems, Geotools
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2004_ra-161
id	ddss2004_ra-161
authors	Bandini, S., S. Manzoni, and G. Vizzari
year	2004
title	Crowd Modeling and Simulation
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 161-175
summary	The paper introduces a Multi Agent Systems (MAS) approach to crowd modelling and simulation, based on the Situated Cellular Agents (SCA) model. This is a special class of Multilayered Multi Agent Situated System (MMASS), exploiting basic elements of Cellular Automata. In particular SCA model provides an explicit spatial representation and the definition of adjacency geometries, but also a concept of autonomous agent, provided with an internal architecture, an individual state and behaviour. The latter provides different means of space-mediated interaction among agents: synchronous, between adjacent agents, and asynchronous among at-a-distance entities. Heterogeneous entities may be modelled through the specification of different agent types, defining different behaviours and perceptive capabilities. After a brief description of the model, its application to simple crowd behaviours will be given, and an application providing the integration of a bidimensional simulator based on this model and a 3D modelling application (3D Studio) will also be described. The adoption of this kind of system allows the specification and simulation of an architectural design with reference to the behaviour of entities that will act in it. The system is also able to easily produce a realistic visualization of the simulation, in order to facilitate the evaluation of the design and the communication with involved decision-makers. In fact, while experts often require only abstract and analytical results deriving from a quantitative analysis of simulation results, other people involved in the decision-making process related to the design may be helped by qualitative aspects better represented by other forms of graphical visualization.
keywords	Multi-Agent Systems, 3D modelling, Simulation
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2004_ra-69
id	ddss2004_ra-69
authors	Barton, J., B. Parolin, and V. Weiley
year	2004
title	A Spatial Decision Support System for the Management of Public Housing
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 69-84
summary	This paper is reporting on a research project undertaken jointly between the University of New South Wales (UNSW) and the NSW Department of Housing (DoH) to develop a Spatial Decision Support System (SDSS) to assist planning, management and evaluation in areas of high public housing concentration. In the paper we will describe the development of the SDSS, the specific spatial problems challenging the DoH and the potential for the system to incorporate a range of social, financial and physical data, both internal and from other sources, for interaction and presentation in a three dimensional environment. The prototype SDSS attempts to address the specific challenges of providing better service for clients of the DoH. An information audit and survey has been conducted of the department’s resources and needs. Issues identified include the management of high-rise and superlot areas, crime mapping, community interactivity, internal and intergovernmental information sharing, interoperability and maintaining confidentiality and security of data. Interactive 3D visualisation of the model is facilitated by use of the 3map free geospace platform. Use of open source code and open standards such as X3D for 3D graphics interchange allow the project to explore advanced visualisation techniques while ensuring interoperability and data longevity.
keywords	Spatial Decision Support System, Public Housing, Community Renewal, Security, Open Source, Interoperability, Visualisation, 3D GIS, PPGIS, X3D
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2004_ra-279
id	ddss2004_ra-279
authors	Bax, M.F.Th. and H.M.G.J. Trum
year	2004
title	On the Notion of Level in Architecture
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 279-292
summary	The notion of Level (in a scale of Levels) is probably the most authentic notion in Architecture. Already in the work of Vitruvius the notion is implicitly present in the triad ‘ordinatio – symmetria – eurythmia’. In more recent times, the notion always appears in relation with hierarchical organization as a means of control of quality. However used in drawings and in architectural discourse, the term lacks precision; there are many types of level like abstraction, specification, dependency, resolution levels etc., but no operational definition can be found as a notion that structures architectural objects and design processes simultaneously in a consistent way. Defining this notion of Level is the purpose of this paper. An example of application in an architectural decision-making process completes the paper.
keywords	Levels, Hierarchy, Architecture, Composition, Complexity, Control
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2004_d-269
id	ddss2004_d-269
authors	Beetz, J., J. van Leeuwen, and B. de Vries
year	2004
title	Towards a Multi Agent System for the Support of Collaborative Design
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 269-280
summary	In this paper we are drafting the outline of a framework for a Multi Agent System (MAS) for the support of Collaborative Design in the architectural domain. The system we are proposing makes use of Machine Learning (ML) techniques to infer personalized knowledge from observing a users’ action in a generic working environment using standard tools such as CAD packages. We introduce and discuss possible strategies to combine Concept Modelling (CM)-based approaches using existing ontologies with statistical analysis of action sequences within a domain specific application. In a later step, Agent technologies will be used to gather additional related information from external resources such as examples of similar problems on the users hard disk, from corresponding work of team-members within an intranet or from advises of expert from different knowledge domains, themselves represented by agents. As users deny or reward resulting proposals offered by the agent(s) through an interface the system will be enhanced over time using methods like Reinforced Learning.
keywords	Multi Agent Systems, Design & Decision Support Systems, Collaborative Design, Human Computer Interfaces, Machine learning, Data Mining
series	DDSS
last changed	2004/07/03 22:13

_id	ascaad2004_paper9
id	ascaad2004_paper9
authors	Bennadji, A.; H. Ahriz, and P. Alastair
year	2004
title	Computer Aided Sustainable Design
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	One of the most important aspects architects need to consider fairly early on is that of energy saving, cost, thermal comfort and the effect on the environment in terms of CO2 emissions. At present, during the early design stage of a building, different options are assessed using simple tools (tables, graphs and software) that contain a large number of assumptions the very nature of which can bias choice or possibly lead to an inappropriate solution. It can be argued that the only way to provide a rational assessment of options is to use calculation methods that represent in detail the physical processes involved; this usually involves the use of dynamic thermal models. Furthermore if this tool is also used during detailed design it would introduce a consistency that is normally absent from the analytical design process. Many designers are of the opinion that, because not all details are known, then such tools are not suitable for application at early stages in the design. This view can be challenged because, even at the concept stage, a great deal is known about a building. This paper aims to show that a general description of a building can be used to generate sufficient data to drive a valid analysis using a detailed thermal model at the early sketch stage of the design process. The paper describes the philosophy, methodology and the interface developed to achieve this aim. The interface guides the user through the input process using a series of screens giving options for keywords used to describe the building; comprehensive default data built into the software are then attached to these keywords. The resulting data file is a building description that is the best possible interpretation of the design intent. This can then be used to assess options and guide towards a final design.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ddss2004_ra-247
id	ddss2004_ra-247
authors	Bi, G. and B. Medjdoub
year	2004
title	Hybrid Approach to Solve Space Planning Problems in Building Services
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 247-261
summary	In this paper an object-based CAD programming is used to take advantage of standardization to handle the schematic design, sizing, layout for services in a building ceiling void. From the specification of the building 3D model, our software proceeds through different steps; from the determination of the standard number and size of fan coils to the generation of 3D solutions. In order to deal with more complex geometry and larger problems, we have used a hybrid approach: Case Based Reasoning (CBR) within Constraint Satisfaction Problem (CSP) approaches. In practice, engineers in building services use previous solutions and adapt them to new problems. CBR mirrors this practical approach and does help us to deal with increasingly complex geometry effectively, and meanwhile CSP has been used for layout adaptation. The results have shown that it is possible to define and implement standard solutions to produce designs comparable with current practice. The benchmarking exercise has underlined many advantages and made some suggestions for further development. This project is funded by The Engineering and Physical Sciences Research Council (EPSRC) in UK.
keywords	Case-Based Reasoning, Constraint Satisfaction Problem, Ceiling Voids Layout, Complex Geometry, Large Problem
series	DDSS
last changed	2004/07/03 22:13

_id	eaea2003_15-breen
id	eaea2003_15-breen
authors	Breen, J. and Giro, H.
year	2004
title	The DXI Experience. Ten Years of Design Visualization Developments in an Educational Laboratory Context
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 71-77
summary	Design visualisation is an essential aspect of virtually every form of design enquiry. The effects of potential environmental interventions may be simulated in order to gain the types of insights, which cannot be acquired easily from two-dimensional notations. Three-dimensional representations may be generated for very different reasons. The most direct form of design imaging is traditionally for the benefit of the designer him/herself, in order to test whether the working concepts offer fitting solutions to the complex array of design conditions such as context, programme and feasibility. Alternately, images may be generated for the benefit of communication, in order to offer insights into the expected workings of a particular proposal (possibly including alternatives). This may lead to greater understanding and possibly to reaching consensus amongst different ‘actors’ involved in the design and realisation process. In many cases the results of such visualisation studies contribute to ‘bridging the gap’ between the professionals and other parties involved more indirectly in design decision-making or the appraisal of the proposals. Designers can use distinctly different methods when going about such imaging procedures. Their choices for particular techniques may depend on their familiarity or the availability of certain media devices. Being confronted with new modelling and/or visualisation instruments can stimulate the interest in fresh approaches. In this respect, the design education environment can play an important role in not only teaching ‘proven’ applications to future designers, but also in creating a platform for the active development of innovative approaches to the design visualisation practices: education as a ‘laboratory’ for new insights and potentially a ‘breeding ground’ for the extension of the designer’s instrumentation. This contribution documents the experiences gained in some ten years within an educational application, involving active use of design driven media applications. The emphasis lies on the evolvement of techniques for eye-level imaging, whereby use can be made of different types of models: physical scale models as well as digital, virtual models. Changing attitudes towards dynamic and serial vision are considered, whereby storyboard approaches on the level of integral presentation are considered. By analysing a selection of cases and their underlying approaches an indication is given of the changing attitudes and combinations of multimedia techniques, which offer opportunities to design visualisation and communication.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	2004_530
id	2004_530
authors	Breen, Jack
year	2004
title	Changing Roles for (Multi)Media Tools in Design - Assessing Developments and Applications of (Multi)Media Techniques in Design Education, Practice and Research
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 530-539
doi	https://doi.org/10.52842/conf.ecaade.2004.530
summary	This contribution explores the continued evolvement of the instruments of design in relation to practice and education (and potentially: research) and attempts to characterize the effects brought about by recent media ‘shifts’. For this purpose a framework has been established to identify and ‘map’ relevant design media. The relationships between various ‘traditional’ media and computer based applications are scrutinized and characterized and the opportunities which they offer are compared. The underlying conceptual framework was recently put before a group of professionals in the in the course of an experimental workshop concerning the potentials of a virtual design media ‘museum’. In the following step an attempt is made to identify changing media roles, whereby the opportunities of the educational environment – as a ‘laboratory’ for emerging developments – is stressed. Some specific tendencies are identified, notably: the combined application of different sorts of design media; the surfacing of imaginative new working methods inspired by ‘classic’ media techniques and various new ways of escaping the serious limitations of traditional computer interfaces. These developments, making use of various types of computer platforms, may be expected to contribute to more structured – and imaginative – approaches to professional design as well as to architectural education and research.
keywords	Computer Support For Learning; The Changing Role of the Design Studio; Educational Methodologies
series	eCAADe
email
last changed	2022/06/07 07:54

_id	eaea2003_11-bremer-sander
id	eaea2003_11-bremer-sander
authors	Bremer, S. and Sander, H.
year	2004
title	View from the Road: Environmental Simulation for the Fractal City of Rhine Ruhr
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 43-47
summary	Highway seems to be more an issue of traffic planning than of urban design. But the highway can be a very important factor for the modern city pattern. Highways shape the spatial form of the fractal city. The modern highway can define new cores outside and “interior edges” within the city. Seen as a planning tool, highways are the great neglected opportunity in city and regional design. The 1st Architecture Biennial, 1ab, taking place from May 2003 to July 2003 in Rotterdam, explores the creative potentials of modern highways worldwide. An international research team discovered the spatial functions of highways in modern agglomerations. This lecture will give an overview of the results of the worldwide analyses and the design projects that had been undertaken. Both authors are members of the German research team. The German team examined the A 42 running through the Ruhrgebiet, a former coal and steal area in western Germany. The Ruhr Area is converting from an industrially orientated region to an agglomeration of high technology and science. But the regional image remains the same due to the fact that the changes cannot be seen, neither physically, nor from the road. Here, the highway could be used as a catalyst supporting and structuring the spatial changes to make them more legible for the people of Rhine-Ruhr. The nature becomes the most important tool of highway design. Landscape forms a linkage between the different cities of the region. Together with the A 40 and other local highways the region becomes the most important (and largest) public space of the new Rhine-Ruhr. The highway seen as a work of urban art can be designed only from the perspective of the driving car.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	ddss2004_d-193
id	ddss2004_d-193
authors	Burkhard, R.
year	2004
title	Visual Knowledge Transfer between Planners and Business Decision Makers
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 193-208
summary	The transfer of knowledge between planners and business decision makers can be improved when planners combine traditional visualizations with business knowledge visualizations. Today architects and urban planners use visualization methods such as sketches, diagrams, drawings, renderings, models and animations to illustrate their projects. While spending an enormous amount of time to illustrate a project, almost no time is used to illustrate business relevant information that decision makers need (i.e., revenue models, risks, return on investments, project phases). Consequences are information overload, misinterpretation or even misuse of information. Juxtaposing the visualizations that planners and decision makers use reveals a major gap: Both groups use different visualization types and are not familiar with the visualization types of each other. This paper stresses the importance to expand the visualization types of planners with business knowledge visualizations. First, it discusses the functioning of visual representations for the transfer of knowledge. Second, it introduces a general knowledge visualization framework. Third, it illustrates examples from an innovative office that improved knowledge transfer with decision makers in urban planning projects. We found that combining traditional visualizations with business knowledge visualizations reduces the information overload, prevents misinterpretation, increases the information quality, improves communication and as a consequence improves decision making. We found that decision makers pay extra for these visualization types, which therefore is a new source of income for planners. The results have implications for the education of future architects.
keywords	Decision Making, Knowledge Transfer, Visualization Types, Interfunctional Communication, Business Knowledge Visualization, Information Visualization
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2004_d-1
id	ddss2004_d-1
authors	Cerovsek, T. and B. Martens
year	2004
title	On the Extended Use of Citations in CAAD
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 1-17
summary	This paper discusses the extended use of the Cumulative Index of CAAD (CUMINCAD) - a digital library set up in 1998 serving the CAAD-community as an important source of scientific information with over 6.000 recorded entries published on-line. The aim of this paper is to elaborate a related Citation Index to CUMINCAD - with over 20.000 references - and to provide information on entries with an exceptional high impact in the CUMINCAD database. The importance is determined through its use (citing) in the framework of afterwards published scientific materials. By utilizing graph theory methods extensive citation analyses will be presented illustrating the impact of particular contributions in different research topics.
keywords	Scientific Knowledge Management, Retrospective CAAD Research, Graph Theory, CAAD-Related Publications, Web-Based Bibliographic Database
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2004_ra-293
id	ddss2004_ra-293
authors	Chang, T.-W.
year	2004
title	Supporting Design Learning with Design Puzzles
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 293-307
summary	The design process is a puzzle-solving process. Two groups of researches that share many similarities with Puzzle-solving design process are the process of game-playing and playful learning. The main argument is using the “playing” characteristics to amplify and explore the learning process, furthermore the design process. In addition, puzzles imply playful exploration that utilizes the characteristics of “playing a game” as “solving a puzzle”. Puzzle making and puzzle solving provides an incremental exploration mechanism that is more intuitive for design learning. For understanding and realizing puzzles in design learning, this research is divided into two stages of researches—manual design puzzles and interactive design puzzles. By analysing the outcome from manual design puzzles, this research proposes a framework called (interactive) “design puzzles”. The conceptual and implementation framework of this view of design is elaborated in this paper as well as a particular design puzzle called puzzle collage is described as the realization of design puzzles.
keywords	Design Puzzles, Design Collage, Puzzle-Making, Andragogy, Game Play
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2008-33
id	ddss2008-33
authors	Charlton, James A.; Bob Giddings and Margaret Horne
year	2008
title	A survey of computer software for the urban designprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Urban design is concerned with the shape, the surface and the physical arrangement of all kinds of urban elements, the basic components that make up the built environment, at the level of buildings, spaces and human activities. It is also concerned with the non-visual aspects of the environment, such as noise, wind and temperature and humidity. The city square is a particular urban element which can take many forms and its geometrical relationships such as maximum dimensions, ratio of width to length and building height to length have been analysed for centuries (Alberti 1475), (Vitruvius 1550), (Sitte 1889), (Corbett 2004). Within the current urban design process there are increasing examples of three dimensional computer representations which allow the user to experience a visual sense of the geometry of city squares in an urban landscape. Computer-aided design and Virtual Reality technologies have recently contributed to this visual assessment, but there have been limited attempts at 3D computer representations which allow the user to experience a greater sense of the urban space. This paper will describe a survey of computer tools which could support a more holistic approach to urban design and which could be used to simulate a number of urban texture and urban quality aspects. It will provide a systematic overview of currently available software that could support the simulation of building density, height, colour and style as well as conditions relating to noise, shading, heat, natural and artificial light. It will describe a methodology for the selection and filtering of appropriate computer applications and offer an initial evaluation of these tools for the analysis and representation of the three-dimensional geometry, urban texture and urban quality of city centre spaces. The paper is structured to include an introduction to the design criteria relating to city centre spaces which underpins this research. Next the systematic review of computer software will be described, and selected tools will undergo initial evaluation. Finally conclusions will be drawn and areas for future research identified.
keywords	Urban design, Software identification, 3D modelling, Pedestrian modelling, Wind modelling, Noise mapping, Thermal comfort, VR Engine
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2004_d-253
id	ddss2004_d-253
authors	Deshpande, N., B. de Vries, and J.P. van Leeuwen
year	2004
title	Collocated, Multi-Disciplinary, Collaborative Designspace
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 253-268
summary	This review identifies the research findings in the area of computer mediated, collocated, multi-disciplinary collaborative design. After a general look into this and related research areas, three influencing aspects of collaborative design are reviewed. Design activities, working together, and collaborative systems that fit into various work practices. Finally, we note missing points of research in the area of collocated, multi-disciplinary, collaborative design.
keywords	Collocated Multi-Disciplinary Collaborative Design (CMCD), Shared Understanding, Computer Supported Collaborative Work (CSCW), Group Activity, Design Space, Groupware
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2004_ra-145
id	ddss2004_ra-145
authors	Devisch, O.T.J., H.J.P. Timmermans, T.A. Arentze, and A.W.J. Borgers
year	2004
title	Towards a Generic MultiAgent Engine for the Simulation of Spatial Behavioural Processes
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 145-160
summary	SwarmCity is being developed as a micro-simulation model, simulating the location-choice behaviour of a population of households, retailers, firms, developers, etc. reacting to an urban plan. The focus of SwarmCity lies –in a first phase- on the decision-making procedures of households, conceptualised as a series of three processes: awakening, search and choice. The methodology used to implement these processes makes use of life-time utility and decisionanalysis trees. The final model should work as a scenario-analysis tool, allowing planners, developers, retailers and municipalities to test interventionproposals, to evaluate legislations, to measure the attractiveness of services, to quantify residential mobility, etc. This paper illustrates the state of the art in household location-choice modelling and introduces a first attempt in developing a conceptual framework.
keywords	Micro Simulation, Multi-Agent Systems, Spatial Simulation Models, Scenario Analysis, Heuristic Decision-Making, Location-Choice Behaviour, DecisionAnalysis Trees, Residential Mobility, Lifetime Utility
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2004_ra-33
id	ddss2004_ra-33
authors	Diappi, L., P. Bolchim, and M. Buscema
year	2004
title	Improved Understanding of Urban Sprawl Using Neural Networks
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 14020-2408-8, p. 33-49
summary	It is widely accepted that the spatial pattern of settlements is a crucial factor affecting quality of life and environmental sustainability, but few recent studies have attempted to examine the phenomenon of sprawl by modelling the process rather than adopting a descriptive approach. The issue was partly addressed by models of land use and transportation which were mainly developed in the UK and US in the 1970s and 1980s, but the major advances were made in the area of modelling transportation, while very little was achieved in the area of spatial and temporal land use. Models of land use and transportation are well-established tools, based on explicit, exogenouslyformulated rules within a theoretical framework. The new approaches of artificial intelligence, and in particular, systems involving parallel processing, (Neural Networks, Cellular Automata and Multi-Agent Systems) defined by the expression “Neurocomputing”, allow problems to be approached in the reverse, bottom-up, direction by discovering rules, relationships and scenarios from a database. In this article we examine the hypothesis that territorial micro-transformations occur according to a local logic, i.e. according to use, accessibility, the presence of services and conditions of centrality, periphericity or isolation of each territorial “cell” relative to its surroundings. The prediction capabilities of different architectures of supervised Neural networks are implemented to the south Metropolitan area of Milan at two different temporal thresholds and discussed. Starting from data on land use in 1980 and 1994 and by subdividing the area into square cells on an orthogonal grid, the model produces a spatial and functional map of urbanisation in 2008. An implementation of the SOM (Self Organizing Map) processing to the Data Base allows the typologies of transformation to be identified, i.e. the classes of area which are transformed in the same way and which give rise to territorial morphologies; this is an interesting by-product of the approach.
keywords	Neural Networks, Self-Organizing Maps, Land-Use Dynamics, Supervised Networks
series	DDSS
last changed	2004/07/03 22:13

For more results click below: