Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2807

Reformat results as: short short into frame detailed detailed into frame

_id	2004_024
id	2004_024
authors	Holmgren, S., Rüdiger, B., Storgaard, K. and Tournay, B.
year	2004
title	The Electronic Neighbourhood - A New Urban Space
doi	https://doi.org/10.52842/conf.ecaade.2004.024
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 24-34
summary	During the event Cultural Market Days on 23 and 24 August 2003 at Noerrebro Park in Copenhagen, visitors could also enter the marketplace from their home via the Internet, as a digital 3D model had been constructed that showed the marketplace with all its information booths and activities. This virtual marketplace functioned as an extension of the urban space, allowing you to take part in the flow of information, activities and experiences that were offered in the marketplace. And this just by a click on the Internet address: http://www.e-kvarter.dk. Furthermore at certain times of the day you could chat with people from some of the many working groups of the urban regeneration project in Noerrebro. The digital 3D model is similar to the marketplace, but it creates its own universe in the green surroundings of Noerrebro Park. And now, when the Cultural Market Days are finished and the booths and people have gone, the Electronic Marketplace still remains on the Internet, with a potential for developing a new public space for information, dialogue and cooperation between the actors of the urban regeneration project. This paper presents the results of a 3-year research project, The Electronic Neighbourhood (2000-2004). Researchers have developed and tested a digital model of the urban area and other digital tools for supporting the dialogue and cooperation between professionals and citizens in an urban regeneration project in Copenhagen. The Danish Agency for Enterprise and Housing, the Ministry for Refugees, Immigration and Integration and Copenhagen Municipality have financed the research, which is planned to be published 2004. The results can also be followed on the Internet www.e-kvarter.dk.
keywords	3D Modelling; Virtual Environments; Design Process; Human-Computer Interaction; Collaborative Design; Urban Planning
series	eCAADe
last changed	2022/06/07 07:50

_id	eaea2003_27-firsov
id	eaea2003_27-firsov
authors	Firsov, A.I.
year	2004
title	Using Video and Computer Technologies for the Appreciation of the Integral Beauty of Architectural Objects
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 135-137
summary	The paper is devoted to finding the aesthetic value of architectural objects and it is the continuation of works /1/ and /2/ executed before. In those the following concepts had been developed: a) dot estimation of beauty of an architectural object; b) function of beauty, c) integrated estimation of beauty of an architectural object. // The integrated estimation of beauty doesn t depend upon the choice of a point of observation and can serve as an objective measure of beauty of an architectural object.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ascaad2004_paper16
id	ascaad2004_paper16
authors	Hassan, R.; K. Jorgensen
year	2004
title	Computer Visualizations in Planning
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	A wide range of visualizations have been developed and implemented as tools for urban simulations and visual impact assessment. These include: plans, diagrams, elevations, perspective sketches, renderings, modified photographs (photo renderings and photomontages), slide projections, scale models, movies, videotapes and computer graphics. In the last decade, graphical computer applications have proven to be an increasingly supportive tool in visualization and manipulation of graphical material. This study presents the state of the art of computer visualization in planning. More specifically, the use of web-based computerized visualizations for landscape visual simulation, with the aim to develop a system of visualization techniques as an aid to communicating planning and design scenarios for historically important landscapes and urban places, with particular attention to the city of Nablus in Palestine. This has led to the evaluation of possibilities and potentials of computer use in this field, and to the definition of the visual problems and challenges of the city of Nablus. This study will argue what extra one can draw from computerized visualizations, what is likely to be its impact on future planning and design research, and what this visualization experience really means for historical important locations as in Nablus. The study demonstrates that computerized visualizations can be a powerful tool in representing a cityscape in three-dimensions from different angels. Visualizations will allow better understanding of the components of the city, its landscapes, city features and the process of change. In this way it may provide new and better platforms for public participation in planning.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	eaea2003_23-kubinsky-kardos
id	eaea2003_23-kubinsky-kardos
authors	Kubinsky, B. and Kardos, P.
year	2004
title	Completion of the Public Area of the Bratislava Main Station using Fine Art Components
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 113-115
summary	The project deals with supplementation of fine art components to the newly designed square in front of the main railway station and their integration into the public space to provide a good system functioning in the contemporary ground-floor level. Several students of Faculty of Architecture, Slovak University of Technology in Bratislava, have elaborated this idea under the leadership of B. Kubinsky with the technical support of P. Kardos during the years 2001 and 2002. The supplementation had been planned in two parts: first each student has designed his own object of art and created the model of his piece. Then, in the second part, the quality and relevance of each object was verified by the spatial endoscope in the laboratory of P. Kardos.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	408caadria2004
id	408caadria2004
authors	Kuhn Park, Ramesh Krishnamurti
year	2004
title	Flexible Design Representation for Construction
doi	https://doi.org/10.52842/conf.caadria.2004.671
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 671-680
summary	A high percentage of overall defects in the built environment occurs during the construction period. Some of these relate to design and the others relate to construction. The detection and reasoning of defects requires involvement of multiple expertise. Researchers in the School of Architecture, the Robotics Institute, and the Department of Civil and Environmental Engineering at Carnegie Mellon University are investing ways to integrate suites of emerging evaluation technologies to help find, record, manage, and limit the impact of construction defects. As part of this effort, the researchers have conducted case studies on construction sites near Pittsburgh, Pennsylvania. Each case study serves as a test-bed to measure the feasibility of our approach and to discover problems. In this paper, we discuss the overall project work flow in which we emphasize the importance of a flexible representation for construction, and describe our solution using a concept of representational flexibility named sorts.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	eaea2003_08-ohno
id	eaea2003_08-ohno
authors	Ohno, R., Soeda, M. and Nakashima, K.
year	2004
title	The Effectiveness of Design Guideline Regulations for Improving Streetscapes
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 21-27
summary	Municipal governments or developers make design guidelines to create harmonious streetscapes in new towns. The regulations, however, are often based on arbitrary decisions without any empirical research. The present study employed a visual simulation system to test the effects of such physical features of the buildings as color, height, flatness of the building façade and its recess from the street on pedestrians’ impressions of the place. Thirty subjects were asked to rate their impressions of “order”, “simple”, and to evaluate the atmosphere after experiencing the simulated scenes. The results revealed some relations between the physical features and the pedestrians’ responses.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	ac12
id	ac12
authors	Akin, Ö.; R. Krishnamurti, K.P. Lam (eds)
year	2005
title	Generative CAD Systems
source	Singapore: Carnegie Mellon University, 2005
summary	In the new millennium, Computer Aided Design has emerged as the most potent technological innovation in design. As BIM promises to integrate design tasks vertically and horizontally through graceful data exchange, new frontiers appear to researchers and practitioners as potential watershed events of the next decade. Generative approaches, a venerable engagement of computational design, is emerging as one of these. The proceedings of the Generative CAD Symposium held at Carnegie Mellon University, both summarizes the three decades of work in this area and reveals the beginnings of research and application expected in this domain. After all, will designers be able to effortlessly and intelligently generate potential design solutions that respond to appropriate design requirements and designers’ intentions?
series	book
type	normal paper
email
more	http://www.andrew.cmu.edu/user/oa04/publications_books.html
last changed	2008/09/04 07:18

_id	sigradi2004_349
id	sigradi2004_349
authors	Adriana Simeone; Roberto Segre; José Ripper Kós
year	2004
title	O processo de desenvolvimento da ferramenta cidade interativa [The Developmental Process of an Interactive City Tool]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This paper exposes site .Cidade Interativa. development process, based on: a reflection about importance of users. points of view.s incorporation for space remodelling; a study about theoretical and practical experiences which, in different ways, approached potencialities of participation of a community.s members in a project; and, finally, a investigation of propagation alternatives of individual readings as information source for urban project, trying to enhance points of view that generally remain occult in the form of invisible practices of anonymous users. This site must be understood as concretion of an idea: creating a vehicle from which is possible to become individual readings public, so that these are shared and, also, make them available to people responsible for urban projects as information source.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ddss2004_ra-177
id	ddss2004_ra-177
authors	Ballas, D., R. Kingston, and J. Stillwell
year	2004
title	Using a Spatial Microsimulation Decision Support System for Policy Scenario Analysis
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 177-191
summary	This paper discusses the potential of a spatial microsimulation-based decision support system for policy analysis. The system can be used to describe current conditions and issues in neighbourhoods, predict future trends in the composition and health of neighbourhoods and conduct modelling and predictive analysis to measure the likely impact of policy interventions at the local level. A large dynamic spatial micro-simulation model is being constructed for the population of Leeds (approximately 715,000 individuals) based on spatial microsimulation techniques in conjunction with a range of data, including 2001 Census data for Output Areas and sample data from the British Household Panel Survey. The project has three main aims as follows: (i) to develop a static microsimulation model to describe current conditions in Leeds; (ii) to enable the performance of ‘What if?’ analysis on a range of policy scenarios; and (iii) to develop a dynamic microsimulation model to predict future conditions in Leeds under different policy scenarios. The paper reports progress in meeting the above aims and outlines the associated difficulties and data issues. One of the significant advantages of the spatial microsimulation approach adopted by this project is that it enables the user to query any combination of variables that is deemed desirable for policy analysis. The paper will illustrate the software tool being developed in the context of this project that is capable of carrying out queries of this type and of mapping their results. The decision support tool is being developed to support policy-makers concerned with urban regeneration and neighbourhood renewal.
keywords	Spatial Microsimulation, Spatial Decision Support Systems, Geotools
series	DDSS
last changed	2004/07/03 22:13

_id	eaea2003_21-ws-bartik
id	eaea2003_21-ws-bartik
authors	Bartik, R.
year	2004
title	The Model of the Town Hradec Kralove 2000
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 103-105
summary	The work on this model is a unique case not only with regard to its extent but predominantly to the implementation of the most up-to-date model production technologies developed on the basis of research activities in the Institute of Model Design, Faculty of Architecture, Czech Technical University in Prague. The construction of the 2000 HK model was ordered on the basis of tender by the Municipality Office of Hradec Králové – Department of the Architect on occasion of the 775th anniversary of the town’s foundation.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	eaea2003_13-bartik
id	eaea2003_13-bartik
authors	Bartik, R.
year	2004
title	Materials and Technologies Utilized in Creation of Architectural Models
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 59-64
summary	The preliminary consideration of criteria directly influencing the choice of technology and material is always essential for the expression of the architect’s or investor’s images.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	acadia04_000
id	acadia04_000
authors	Beesley, P., Cheng, N.Y.-W. and Williamson, R.S. (eds.)
year	2004
title	FABRICATION: EXAMINING THE DIGITAL PRACTICE OF ARCHITECTURE
doi	https://doi.org/10.52842/conf.acadia.2004
source	Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 09696665-2-7] Cambridge (Ontario) 8-14 November, 2004.
summary	We are presenting design ideas, technical innovation, and fabrication expertise that address crucial issues. Authors investigate how to effectively design and practice architecture with automated prototyping and manufacturing. We want to understand where this might lead, and how it might change the nature of architecture itself. We are just beginning to discover the opportunities to be found in integrating automated fabrication within the practice of architecture. At the same time, the new century has brought very mixed perspectives on confident Modern progress. A cautious scrutiny of 'innovation' is needed. Fabrication is an old word with the straightforward meaning, to make. The roots of the word lead to the origins of architecture. Making has been considered a virtue by ancient writers and modern politicians alike. Fabrication (and homo faber, 'one who makes') have served as fundamental terms that constitutions and contract laws have been built upon. Shaping and working with materials is at the core of Western civilization. However at a point in human history where nature is steadily being replaced by human artifice, the consequences of making are far from simple. Whether for good or ill, our new fabricated environment is transforming the world.
series	ACADIA
type	normal paper
last changed	2022/06/07 07:49

_id	ddss2004_d-193
id	ddss2004_d-193
authors	Burkhard, R.
year	2004
title	Visual Knowledge Transfer between Planners and Business Decision Makers
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 193-208
summary	The transfer of knowledge between planners and business decision makers can be improved when planners combine traditional visualizations with business knowledge visualizations. Today architects and urban planners use visualization methods such as sketches, diagrams, drawings, renderings, models and animations to illustrate their projects. While spending an enormous amount of time to illustrate a project, almost no time is used to illustrate business relevant information that decision makers need (i.e., revenue models, risks, return on investments, project phases). Consequences are information overload, misinterpretation or even misuse of information. Juxtaposing the visualizations that planners and decision makers use reveals a major gap: Both groups use different visualization types and are not familiar with the visualization types of each other. This paper stresses the importance to expand the visualization types of planners with business knowledge visualizations. First, it discusses the functioning of visual representations for the transfer of knowledge. Second, it introduces a general knowledge visualization framework. Third, it illustrates examples from an innovative office that improved knowledge transfer with decision makers in urban planning projects. We found that combining traditional visualizations with business knowledge visualizations reduces the information overload, prevents misinterpretation, increases the information quality, improves communication and as a consequence improves decision making. We found that decision makers pay extra for these visualization types, which therefore is a new source of income for planners. The results have implications for the education of future architects.
keywords	Decision Making, Knowledge Transfer, Visualization Types, Interfunctional Communication, Business Knowledge Visualization, Information Visualization
series	DDSS
last changed	2004/07/03 22:13

_id	ijac20075402
id	ijac20075402
authors	Burry, Jane R.
year	2007
title	Mindful Spaces: Computational Geometry and the Conceptual Spaces in which Designers Operate
source	International Journal of Architectural Computing vol. 5 - no. 4, pp. 611-624
summary	Combinatorial computational geometry, while dealing with geometric objects as discrete entities, provides the means both to analyse and to construct relationships between these objects and relate them to other non-geometrical entities. This paper explores some ways in which this may be used in design through a review of six, one-semester-long design explorations by undergraduate and postgraduate students in the Flexible Modeling for Design and Prototyping course between 2004 and 2007. The course focuses on using computational geometry firstly to construct topologically defined design models based on graphs of relationships between objects (parametric design,) and concurrently to output physical prototypes from these "flexible models"(an application of numerical computational geometry). It supports students to make early design explorations. Many have built flexible models to explore design iterations for a static spatial outcome. Some have built models of real time responsive dynamic systems. In this educational context, computational geometry has enabled a range of design iterations that would have been challenging to uncover through physical analogue means alone. It has, perhaps more significantly, extended the students' own concept of the space in which they design.
series	journal
email
last changed	2008/02/25 20:30

_id	2004_580
id	2004_580
authors	Dokonal, W., Martens, B. and Plösch, R.
year	2004
title	Creating and Using Virtual Cities
doi	https://doi.org/10.52842/conf.ecaade.2004.580
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 580-585
summary	City modelling is a topic which has been on the agenda for a long time and two main approaches from different angles in this field can be identified. GIS experts have attempted over the years (in collaboration with programmers) to build information systems for cities by means of combining graphical information with related metadata. Architects also started to get involved in this field. However, they were mainly interested in the spatial aspects of a city model and created their own “city models” for different purposes. Today crucial questions concerning the creation itself are resolved, the vision of implementation into daily work becomes more and more important. In other words: “what to do” with the accumulated data. This paper intends to identify the core role of the architect in the field of 3D-city modelling.
keywords	Urban Modelling, 3D Modelling, GIS, Virtual Worlds, City Model
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2004_240
id	sigradi2004_240
authors	Dora Castañé; Arturo F. Montagu
year	2004
title	Mercedes: De lo sustentable al ecoproyecto en poblados con patrimonio histórico [Mercedes: A Sustainable Ecoproject in Towns with Historical Patrimony]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This proposal addresses the following topic of a doctoral thesis in progress: The Evolution and Development of Digitized Processes for the Research and Maintenance of Small Town Patrimonies, School and Architecture and Urban Design, University of Buenos Aires, co-directed by architects A. Montagu and R. Gutierrez. The research has been based on the town of Mercedes, Province of Buenos Aires, Argentina, symbols of Buenos Aires.s cultural heritage. At this stage, we are looking for alternative methods to support a project of patrimonial preservation that would help define future landscapes of small towns, and, at the same time, would have minimal or positive environmental impact. This analysis proposes reflexive studies of the paradigms affecting the environment and the feasibility of the project, with the intention of utilizing the concept of .ecoproject.. Therefore, the crucial assistance of specific digital systems, from which evolution is analyzed, supports and enhances the efficiency of the proposed goal. New and broad research opportunities are opening up in this field.
keywords	Patrimony, research, virtual city, preservation
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ecaade2022_398
id	ecaade2022_398
authors	Dzurilla, Dalibor and Achten, Henri
year	2022
title	What’s Happening to Architectural Sketching? - Interviewing architects about transformation from traditional to digital architectural sketching as a communicational tool with clients
doi	https://doi.org/10.52842/conf.ecaade.2022.1.389
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 389–398
summary	The paper discusses 23 interviewed architects in practice about the role of traditional and digital sketching (human-computer interaction) in communication with the client. They were selected from 1995 to 2018 (the interval of graduation) from three different countries: the Czech Republic (CR), Slovakia (SR), Netherland (NR). To realize three blending areas that impact the approach to sketching: (I) Traditional hand and physical model studies (1995-2003). (II)Transition form - designing by hand and PC (2004–2017). (III) Mainly digital and remote forms of designing (2018–now). Interviews helped transform 31 “parameters of tools use” from the previous theoretical framework narrowed down into six main areas: (1) Implementation; (2)Affordability; (3)Timesaving; (4) Drawing support; (5) Representativeness; (6) Transportability. Paper discusses findings from interviewees: (A) Implementation issues are above time and price. (B) Strongly different understanding of what digital sketching is. From drawing in Google Slides by mouse to sketching in Metaverse. (C) Substantial reduction of traditional sketching (down to a total of 3% of the time) at the expense of growing responsibilities. (D) 80% of respondents do not recommend sketching in front of the client. Also, other interesting findings are further described in the discussion.
keywords	Architectural Sketch, Digital Sketch, Effective Visual Communication
series	eCAADe
email
last changed	2024/04/22 07:10

_id	ascaad2004_paper1
id	ascaad2004_paper1
authors	Eldin, Neil N. and K.A. Eldrandaly
year	2004
title	A Computer-Aided System for Site Selection of Major Capital Investments
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	Site selection for capital investments is a crucial complex decision for owners and analysts. Difficulties are caused by the inclusion of the numerous possible sites that may qualify, multiple objectives that could also contradict each other, intangible objectives that are difficult to quantify, diversity of interest groups, uncertainties regarding external factors such as government legislations, uncertainties regarding the timing required for permitting the sites in question, and unknown construction challenges for the different sites. As such, these exercises are multi-facetted and necessitate the employment of analysts who possess in-depth knowledge in a number of fields. More importantly, a solution must satisfy a number of physical suitability criteria, as well as, meeting a number of social, economical, environmental and political requirements. Consequently, a number of specialized tools is frequently utilized to ensure reaching an optimal decision. This paper presents a new system that integrates Analytic Hierarchy Process (AHP) operations within a Geographic Information System (GIS) application to determine the optimum site for a specified facility. The system was validated through a facility for a selected metropolitan area.
series	ASCAAD
last changed	2007/04/08 19:47

_id	sigradi2005_394
id	sigradi2005_394
authors	Flores Reyes, Maria Loreto
year	2005
title	Diagram as media of design speculation. The productive ambiguity of Voronoi diagram.
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 394-399
summary	In contrast to the traditional models of design processes based on the abstract manipulation of objects, the new digital media arena provides to architecture an interesting territory of experimentation characterized by non-linear design processes capable to articulate spatial requirements and social organizations on time. In this sense, the speculation through a diagrammatic system proposes a change focused on design as a network of processes. According to this, this paper purpose is to investigate the validity of these arguments through the use of Voronoi Diagram as design tool into the context of Create_Space research agenda of the AAD[R]L 2004-2005.
series	SIGRADI
email
last changed	2016/03/10 09:52

For more results click below: