Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 969

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2006_paper29
id	ascaad2006_paper29
authors	Bennadji, A. and A. Bellakha
year	2006
title	Evaluation of a Higher Education Self-learning Interface
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This paper is a follow-up to a previous paper published in ASCAAD 2004 (A. Bennadji et al 2005). The latter reported on CASD (Computer Aided Sustainable Design) a self-learning educational interface which assists the various building’s actors in their design with a particular attention to the aspect of energy saving. This paper focuses on the importance of software evaluation and how the testing is done to achieve a better human-machine interaction. The paper will go through the summative evaluation of CASD, presents the output of this evaluation and addresses the challenge facing software developers: how to make an interface accessible to all users and specifically students in higher education.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	acadia07_174
id	acadia07_174
authors	Bontemps, Arnaud; Potvin, André; Demers, Claude
year	2007
title	The Dynamics of Physical Ambiences
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 174-181
doi	https://doi.org/10.52842/conf.acadia.2007.174
summary	This research proposes to support the reading of physical ambiences by the development of a representational technique which compiles, in a numerical interface, two types of data: sensory and filmic. These data are recorded through the use of a portable array equipped with sensors (Potvin 1997, 2002, 2004) as well as the acquisition of Video information of the moving environment. The compilation of information is carried out through a multi-media approach, by means of a program converting the environmental data into dynamic diagrams, as well as the creation of an interactive interface allowing a possible diffusion on the Web. This technique, named APMAP/Video, makes it possible to read out simultaneously spatial and environmental diversity. It is demonstrated through surveys taken at various seasons and time of the day at the new Caisse de dépôt et de placement headquarters in Montreal which is also the corpus for a SSHRC (Social Sciences and Humanities Research Council) research grant on Environmental Adaptability in Architecture (Potvin et al. 2003-2007). This case study shows that the technique can prove of great relevance for POEs (Post Occupancy Evaluation) as well as for assistance in a new design project.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2021_297
id	ecaade2021_297
authors	Guida, George, Tian, Runjia and Dong, Yuebin
year	2021
title	Multimodal Virtual Experience for Design Schools in the Immersive Web
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 1, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 415-424
doi	https://doi.org/10.52842/conf.ecaade.2021.1.415
summary	The COVID-19 pandemic has made most schools, universities, and gathering spaces fully virtual. Commonly used communication platforms such as Zoom, Skype, and Microsoft Teams are limited in recreating physical interactions and offer mostly static interfaces with limited occasions for spontaneous encounters. This project creates a space that seeks to address this issue, first through the digitization of familiar physical spaces, and then through their augmentation via WebXR technologies[1]. A gamification strategy is adopted, where users can virtually learn, collaborate and socialize through personalized avatars within a dynamic and multi-sensorial digital environment. In this paper, we present a completed prototype that is currently being tested at the Harvard Graduate School of Design. The school of architecture has been digitized and experientially augmented thanks to an asymmetrical system that offers rich modalities of interaction through different platforms. The project builds upon the wide experiential potential of digital platforms, otherwise not possible in reality, and implements a customized multi-modal user interface (Reeves et al. 2004).
keywords	WebXR; Virtual Reality; Human Computer Interaction; Gamification; User Interface
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
doi	https://doi.org/10.52842/conf.acadia.2016.140
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	cf2009_poster_43
id	cf2009_poster_43
authors	Oh, Yeonjoo; Ellen Yi-Luen Do, Mark D Gross, and Suguru Ishizaki
year	2009
title	Delivery Types And Communication Modalities In The Flat-Pack Furniture Design Critic
source	T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary	A computer-based design critiquing system analyzes a proposed solution and offers critiques (Robbins 1998). Critiques help designers identify problems as well as opportunities to improve their designs. Compared with human critics, today’s computer-based critiquing systems deliver feedback in quite restricted manner. Most systems provide only negative evaluations in text; whereas studio teachers critique by interpreting the student’s design, introducing new ideas, demonstrating and giving examples, and offering evaluations (Bailey 2004; Uluoglu 2000) using speech, writing, and drawing to communicate (Anthony 1991; Schön 1983). This article presents a computer-based critiquing system, Flat-pack Furniture Design Critic (FFDC). This system supports multiple delivery types and modalities, adapting the typical system architecture of constraint-based intelligent tutors (Mitrovic et al. 2007).
keywords	Critiquing system, design critiquing
series	CAAD Futures
type	poster
email
last changed	2009/07/08 22:12

_id	caadria2020_363
id	caadria2020_363
authors	Pal, Abhipsa, Chan, Wi Leen, Tan, Ying Yi, Chia, Pei Zhi and Tracy, Kenneth Joseph
year	2020
title	Knit Concrete Formwork
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 213-222
doi	https://doi.org/10.52842/conf.caadria.2020.1.213
summary	The manufacture of concrete funicular shells often relies on traditional formwork construction techniques to provide a sculptured cavity for the fluid material to occupy (Bechthold, 2004). While this enables a predictable geometric outcome, the extensive use of timber and/or steel to construct these formworks account for up to 60% of the total production cost of concrete and are discarded after the casting is complete (Lloret et al. 2014). Thus, we propose an alternative method to create prefabricated modular systems out of concrete casted in customised tubular knitted membranes. These perform as a network of struts that can be affixed onto 3D printed nodes of a singular design. Altogether, these components serve as a kit-of-parts that can be transported to site and assembled together to create shell geometries.
keywords	Knitted Textile; Fabric Formwork; Concrete Casting
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ecaade2015_161
id	ecaade2015_161
authors	Papasarantou, Chrissa; Kalaouzis, Giorgos, Pentazou, Ioulia and Bourdakis, Vassilis
year	2015
title	A Spatio-Temporal 3D Representation of a Historic Dataset
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 701-708
doi	https://doi.org/10.52842/conf.ecaade.2015.1.701
wos	WOS:000372317300076
summary	Previous research (Bourdakis et al, 2012; Papasarantou et al, 2013) dealt with the problem of creating information visualisation systems capable of combining historical data of MUCIV's database and developing strategies that embed the non-spatial data in spatial models. The database was primarily designed as an experimental flexible spatio-temporal configuration of dynamic visual structures generating a variety of narrations through interaction.The attempt of producing a legible configuration driven by a number of criteria, led to the proposition of two different arrangements, namely the linear and radial array. The aim of this paper is to present the next step on the visualization after redefining both the way that thematic axes and data are visualized and arranged/scattered. Alternate configurations are investigated, based also on theoretical analysis on the conceptualization and perception of information visualization systems (Card et al 1999, Ware, 2004).
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=74178dba-702a-11e5-aa5b-67bfe1e6502f
last changed	2022/06/07 08:00

_id	206caadria2004
id	206caadria2004
authors	Ricardo Sosa and John S. Gero
year	2004
title	Diffusion of Design Ideas: Gatekeeping Effects
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 287-302
doi	https://doi.org/10.52842/conf.caadria.2004.287
summary	Designers and design managers are interested in gaining a deeper understanding of the complexities of creativity and innovation (Langdon and Rothwell 1985). These two phenomena can be seen as complementary dimensions of a differentiation cycle where design plays a key value-adding role that gradually reduces through commoditisation. However, there is a lack of relevant evidence to explain the link between creativity and innovation. Creativity is increasingly considered as occurring in the interaction between the individual generator of an idea and a group of evaluators (Sawyer et al 2003). However, most studies have regarded the generation of a solution -and not its social impact- as the outcome of the creative process (Runco and Pritzker 1999). Accordingly, computational modelling of creativity has been mainly conducted in a social void (Boden 1999).
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia07_284
id	acadia07_284
authors	Robinson, Kirsten; Gorbet, Robert; Beesley, Philip
year	2007
title	Evolving Cooperative Behaviour in a Reflexive Membrane
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 284-293
doi	https://doi.org/10.52842/conf.acadia.2007.284
summary	This paper describes the integration of machine intelligence into an immersive architectural sculpture that interacts dynamically with users and the environment. The system is conceived to function as an architectural envelope that might transfer air using a distributed array of components. The sculpture includes a large array of interconnected miniature structural and kinetic elements, each with local sensing, actuation, and machine intelligence. We demonstrate a model in which these autonomous, interconnected agents develop cooperative behaviour to maximize airflow. Agents have access to sensory data about their local environment and ‘learn’ to move air through the working of a genetic algorithm. Introducing distributed and responsive machine intelligence builds on work done on evolving embodied intelligence (Floreano et al. 2004) and architectural ‘geotextile’ sculptures by Philip Beesley and collaborators (Beesley et al. 1996-2006). The paper contributes to the general field of interactive art by demonstrating an application of machine intelligence as a design method. The objective is the development of coherent distributed kinetic building envelopes with environmental control functions. A cultural context is included, discussing dynamic paradigms in responsive architecture.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 08:00

_id	ddss2004_d-77
id	ddss2004_d-77
authors	Tangari, L., M. Ottomanelli, and D. Sassanelli
year	2004
title	The Project Planning of Urban Decongestion
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 77-92
summary	This study introduces a methodology for the evaluation, among a set of possible plans and/or policies, of a transport system which could reduce the effects of the network congestion on an urban area. Hence it is proposed a procedure which contains a new element compared with the current methodologies that is the final user’s evaluation of the examined system by turning to the application of the contingent valuation method, a technique like stated preferences. The approach we propose is based on the necessity for a determination of an optimal solution to the urban congestion to be established on the politic acceptability by the final user. Solutions which result virtually feasible for a public administration both on a technique and economic point of view often meet hostility by individuals. Consequently, it would be interesting for policy makers to adopt a process of valuation which could let to understand the user’s sensitivity and hostility towards specific configurations of the system, chosen as solution to decongestion (traffic calming, roadpricing, auto-free zones) and consequently to make less unpleasant the strategy to be carried out to control congestion (Harrington et al., 2001). In this way, a user does not judge the implementation of a set of projects made by a decision-maker as imposition and he is willing to pay in order to fulfil the chosen scenario. Finally we describe an application of the proposed methodology relating the definition of the integrated transport system in the metropolitan area of Bari, chief town of Apulia.
keywords	Contingent Valuation, Transportation Planning, Urban Decongestion
series	DDSS
last changed	2004/07/03 22:13

_id	101caadria2004
id	101caadria2004
authors	Tuzmen, A.
year	2004
title	REQUIREMENTS-BASED METHDOLOGY FOR THE EVALUATION OF THE COMPUTER SUPPORTED COLLABORATION ENVIRONMENTS
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 19-34
doi	https://doi.org/10.52842/conf.caadria.2004.019
summary	Literature consists of research identifying the benefits and pitfalls of the use of computer supported collaboration tools and environments to support collaborating design teams (Kvan, 1998; Maher et al, 2000). However, we don’t find enough information in literature about the methodology needed for evaluating the performance of a collaboration environment in meeting the needs and expectations of the collaborating design teams. There are no uniformly accepted methodologies or metrics for evaluating the performance of a design collaboration environment. This paper introduces a requirements-based methodology for evaluating the effectiveness of design collaboration environments. The requirements-based methodology was developed and implemented during a process which involved: a) the use of various synchronous and asynchronous collaboration environments, and b) comparison of those against each other each other by an evaluation methodology. The evaluation methodology proposed in this study is experimented during a course entitled Computer Supported Collaborative Design at the University of Sydney.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	caadria2018_016
id	caadria2018_016
authors	Zahedi, Ata and Petzold, Frank
year	2018
title	Utilization of Simulation Tools in Early Design Phases Through Adaptive Detailing Strategies
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 11-20
doi	https://doi.org/10.52842/conf.caadria.2018.2.011
summary	Decisions taken at early stages of building design have a significant effect on the planning steps for the entire lifetime of the project as well as the performance of the building throughout its lifecycle (MacLeamy 2004). Building Information Modelling (BIM) could bring forward and enhance the planning and decision-making processes by enabling the direct reuse of data hold by the model for diverse analysis and simulation tasks (Borrmann et al. 2015). The architect today besides a couple of simplified simulation tools almost exclusively uses his know-how for evaluating and comparing design variants in the early stages of design. This paper focuses on finding new ways to facilitate the use of analytical and simulation tools during the important early phases of conceptual building design, where the models are partially incomplete. The necessary enrichment and proper detailing of the design model could be achieved by means of dialogue-based interaction concepts with analytical and simulation tools through adaptive detailing strategies. This concept is explained using an example scenario for design process. A generic description of the aimed dialog-based interface to various simulation tools will also be discussed in this paper using an example scenario.
keywords	BIM; Early Design Stages; Adaptive Detailing ; Communication Protocols; Design Variants
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2013_185
id	ecaade2013_185
authors	Zají_ková, Veronika and Achten, Henri
year	2013
title	Landscape Information Modeling
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 515-523
doi	https://doi.org/10.52842/conf.ecaade.2013.2.515
wos	WOS:000340643600052
summary	In this paper we report on a recently started PhD project in which we investigate the extension of the concept of “Building Information Model” (BIM) to the domain of landscape design. The potential benefits of BIM in the field of architecture have been reported many times (e.g., Ibrahim et al., 2004; Eastman et al., 2008; Abdelmohsen et al., 2011). However, in landscape design an information model in the way of BIM seems to be missing. Benefits of a Landscape Information Model would be (a) formalisation of knowledge in landscape design; (b) information model to support multiple participants in landscape design; (c) improved information exchange between landscape design, architecture, and urban design. In this paper we set out the basic outline of the research.
keywords	BIM; landscape design; LIM.
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ascaad2004_paper17
id	ascaad2004_paper17
authors	Al-Attili, Aghlab A. and Richard D. Coyne
year	2004
title	Embodiment and Illusion: The Implications of Scale as a Cue for Immersion in Virtual Environments
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	This paper examines the extent to which the issue of scale impinges on our sense of immersion in virtual environments. We consider perception from the point of view of Merleau-Ponty's phenomenology, and describe a study involving extended interviews of a small number of subjects who were presented with static, moving and interactive images of spaces. We test a series of propositions about scale cues, and speculate on the wider phenomenological issues of expectation, metaphor and play.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ascaad2004_paper12
id	ascaad2004_paper12
authors	Al-Qawasmi, Jamal
year	2004
title	Reflections on e-Design: The e-Studio Experience
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	The influence of digital media and information technology on architectural design education and practice is increasingly evident. The practice and learning of architecture is increasingly aided by and dependant on digital media. Digital technologies not only provide new production methods, but also expand our abilities to create, explore, manipulate and compose space. In contemporary design education, there is a continuous demand to deliver new skills in digital media and to rethink architectural design education in the light of the new developments in digital technology. During the academic years 2001-2003, I had the chance to lead the efforts to promote an effective use of digital media for design education at Department of Architecture, Jordan University of Science and Technology (JUST). Architectural curriculum at JUST dedicated much time for teaching computing skills. However, in this curriculum, digital media was taught in the form of "software use" education. In this context, digital media is perceived and used mainly as a presentation tool. Furthermore, Computer Aided Architectural Design and architectural design are taught in separate courses without interactions between the two.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	sigradi2004_047
id	sigradi2004_047
authors	Antonio Almagro Gorbea; Ana Almagro Vidal; José Antonio Fernández Ruiz; Miguel González Garrido
year	2004
title	Madinat al-zahraí: Investigación y representación [Madinat al-Zahraí: Investigation and Representation]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	The virtual reconstruction of the archeological site of Madinat al-Zahra. in Córdoba (Spain) has permitted a new approach to the study and comprehension of this palatine city as well as to the typologies of Islamic architecture in Al-Andalus during the 10th century. Starting from fieldwork and from a photogrammetric survey of the site, the digital model has become a highly qualified tool in the research process. Through virtual navigation, it allows to learn new aspects about spatial configuration of this characteristic constructions that configure the basis for the development of further architectures during the following centuries. Furthermore, being conscious that knowledge is basic for cultural heritage preservation, this 3D reconstruction model is an important instrument for general dissemination and for implementing a visit to this significant case of Islamic architecture in Spain.
keywords	Islamic architecture, computer graphics, virtual reconstruction, 3D modeling
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2004_240
id	sigradi2004_240
authors	Dora Castañé; Arturo F. Montagu
year	2004
title	Mercedes: De lo sustentable al ecoproyecto en poblados con patrimonio histórico [Mercedes: A Sustainable Ecoproject in Towns with Historical Patrimony]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This proposal addresses the following topic of a doctoral thesis in progress: The Evolution and Development of Digitized Processes for the Research and Maintenance of Small Town Patrimonies, School and Architecture and Urban Design, University of Buenos Aires, co-directed by architects A. Montagu and R. Gutierrez. The research has been based on the town of Mercedes, Province of Buenos Aires, Argentina, symbols of Buenos Aires.s cultural heritage. At this stage, we are looking for alternative methods to support a project of patrimonial preservation that would help define future landscapes of small towns, and, at the same time, would have minimal or positive environmental impact. This analysis proposes reflexive studies of the paradigms affecting the environment and the feasibility of the project, with the intention of utilizing the concept of .ecoproject.. Therefore, the crucial assistance of specific digital systems, from which evolution is analyzed, supports and enhances the efficiency of the proposed goal. New and broad research opportunities are opening up in this field.
keywords	Patrimony, research, virtual city, preservation
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	sigradi2004_036
id	sigradi2004_036
authors	Lucía Gómez; Lola Vico
year	2004
title	Infografia aplicada al patrimonio cultural: El caso del ninfeo de campetti (Veio) [Infographics Applied to Cultural Heritage: The Case of "Ninfeo de Campetti (Veio)"]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This paper presents the results of an in-depth study and virtual reconstruction of the Nymphaeum of Veio, in the archaeological zone of Villa Campetti, Rome. The study consisted in analysing the vestiges and enlightening the findings with a thorough literature review about the Nymphaeum itself as well as about contemporary and similar constructions. A digital model was then elaborated, as an attempt to recreate the Nymphaeum of Veio as it may have stood during the Roman period. The Nymphaeum had been decorated with roman frescoes of the III style, now highly deteriorated. The virtual reconstruction intends to reproduce the harmony of volumes, structure and paintings of the chamber. It also helps to better understand its configuration. This kind of reconstruction, based on historical and architectural research, offers great possibilities in the world or architectonic and archaeological heritage, allows the recovery and analysis of spaces otherwise lost forever.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2006_c080e
id	sigradi2006_c080e
authors	Müller, Milagros
year	2006
title	Del suceso artístico al espectador [From the art event to the spectator]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 434-437
summary	Contemporaneus art constructs its own space: interactive, multiple, eidetic, heterogenous, discontinuous and subjective: essence, forms and idea of a heterotopic at the same time atopic space, that arises at the moment of the intelligible apprehension of the work. This work sets out to study the cyberperption of that space from the spectator, for whom the history is the sum of histories narrated by the space, the scenery, choreography, dances, illumination, music, sounds, songs, word, performance, gestures etc., for which sets out the analysis from the perceived, analyzed and interpreted images by the spectator. It will be implemented from Body automatical Body resistant of Yacov Sharir (2004), using the qualitative research method, where the speaker meaning is introduced: the creator intentionality of those spaces, but is inescapable who arises the “interpretation” from the observer.
series	SIGRADI
email
last changed	2016/03/10 09:55

For more results click below: