Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2530

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2005_a_2b_a
id	caadria2005_a_2b_a
authors	Affleck, Janice; Kvan Thomas
year	2005
title	REINTERPRETING VIRTUAL HERITAGE
doi	https://doi.org/10.52842/conf.caadria.2005.169
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 169-178
summary	This paper describes the context and proposal for an alternative approach to the common pattern of application of digital tools in the area of cultural heritage, also know as Virtual Heritage (VH). It investigates and addresses arising issues in a digital case study developed to implement a theoretical framework and investigate how and if existing technology can support it.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	cf_2003_000
id	cf_2003_000
authors	Chiu, M.-L., Tsou, J.-Y., Kvan, Th., Morozumi, M. and Jeng, T.-S. (Eds.)
year	2003
title	Digital Design - Research and Practice
source	Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1 / Tainan (Taiwan) 13–15 October 2003, 464 p.
summary	The use of computers in the design of the built environment has reached a watershed. From peripheral devices in the design process, they have in recent years come to take centre stage. An illustration is immediately at hand. Just as the entries to the competition for the Chicago Tribune Tower in 1922 defined the state-of-the-art at the beginning of the twentieth century, we have a similar marker at the end of the century, the competition in 2002 to replace the World Trade Centre towers in Lower Manhattan offered us a range of architectural solutions that exemplified the state-of-the-art eighty years later, setting forth not only architectural statements but also illustrating clearly the importance of computers in the design of the built environment. In these entries of 2002, we can see that computers have not only become essential to the communication of design but in the investigation and generation of structure, form and composition. The papers in this book are the current state-of-the-art in computer-aided design as it stands in 2003. It is the tenth in a series sponsored by the CAAD Futures Foundation, compiled from papers presented at the biennial CAAD Futures Conferences. As a series, the publications have charted the steady progress in developing the theoretical and practical foundations for applications in design practice. This volume continues in that tradition; thus, this book is entitled Digital Design: Research and Practice. The papers are grouped into three major categories, reflecting thrusts of research and practice, namely: Data and information: its organisation, handling and access, including agents; Virtual worlds: their creation, application and interfaces; and Analysis and creation of form and fabric. The editors received 121 abstracts after the initial call for contributions. From these, 61 abstracts were selected for development into complete papers for further review. From these submissions, 39 papers were chosen for inclusion in this publication. These papers show that the field has evolved from theoretical and development concerns to questions of practice in the decade during which this conference has showcased leading work. Questions of theoretical nature remain as the boundaries of our field expand. As design projects have grasped the potentials of computer-aided design, so have they challenged the capabilities of the tools. Papers here address questions in geometric representation and manipulation (Chiu and Chiu; Kocaturk, Veltkamp and Tuncer), topics that may have been considered to be solved. As design practice becomes increasingly knowledge based, better ways of managing, manipulating and accessing the complex wealth of design information becomes more pressing, demanding continuing research in issues such as modelling (Yang; Wang; Zreik et al), data retrieval and querying (Hwang and Choi; Stouffs and Cumming; Zreik, Stouffs, Tuncer, Ozsariyildiz and Beheshti), new modes of perceiving data (Segers; Tan). Tools are needed to manage, mine and create information for creative work, such as agents (Liew and Gero; Smith; Caneparo and Robiglio; Ding et al) or to support design processes (Smith; Chase). Systems for the support and development of designs continue (Gero; Achten and Jessurun). As progress is made on some fronts, such as user interfaces, attention is again turned to previously research areas such as lighting (Jung, Gross and Do; Ng et al; Wittkopf; Chevier; Glaser, Do and Tai) or services (Garcia; Chen and Lin). In recent years the growth of connectivity has led to a rapid growth in collaborative experience and understanding of the opportunities and issues continues to mature (Jabi; Dave; Zamenopoulos and Alexiou). Increasing interest is given to implications in practice and education (Dave; Oxman; Caneparo, Grassi and Giretti). Topics new to this conference are in the area of design to production or manufacture (Fischer, Burry and Frazer; Shih). Three additional invited papers (Rekimoto; Liu; Kalay) provide clear indication that there is still room to develop new spatial concepts and computer augmented environments for design. In conclusion, we note that these papers represent a good record of the current state of the evolving research in the field of digital design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/
last changed	2003/09/22 12:21

_id	d347
authors	Kvan, Th., Vera, A. and West, R.L.
year	1997
title	Expert and Situated Actions in Collaborative Design
source	Proceedings of Second International Workshop on CSCW in Design, ed. P. Siriruchatapong, Z. Lin & J.-P. Barthes. Second International Workshop on CSCW in Design, Beijing: International Academic Publishers, November, pp. 400-405
summary	This paper considers one of the fundamental questions behind research and implementation into collaborative design systems for architectural design: To what extent is design situated and to what extent is it expert behaviour? Extending from this question arises implementation questions for CSCW systems for architectural design. The authors propose a cognitive model of design and tested the model experimentally. From the results of the experiments; a discussion is presented of the expert and situated facets of the design process which have been manifested.
keywords	Collaboration; CSCW; Group Work; Design
series	other
email
last changed	2003/01/28 12:06

_id	789d
authors	Kvan, Th., West, R. and Vera, A.
year	1997
title	Tools for a Virtual Design Community
source	Preprints Formal Aspects of Collaborative CAD, ed. M. L. Maher, J. S. Gero & F. Sudweeks, Sydney: Key Centre of Design Computing, Department of Architectural and Design Science, University of Sydney, pp. 109-123
summary	This paper proposes a methodology to evaluate the effects of computer-mediated communication on collaboratively solving design problems. When setting up a virtual design community; choices must be made between a variety of tools; choices dictated by budget; bandwidth; ability and availability. How do you choose between the tools; which is useful and how will each affect the outcome of the design exchanges you plan? A commonly used method is to analyze the work done and to identify tools which support this type of work. In general; research on the effects of computer-mediation on collaborative work has concentrated mainly on social-psychological factors such as deindividuation and attitude polarization; and used qualitative methods. In contrast; we propose to examine the process of collaboration itself; focusing on separating those component processes which primarily involve individual work from those that involve genuine interaction. Extending the cognitive metaphor of the brain as a computer; we view collaboration in terms of a network process; and examine issues of control; coordination; and delegation to separate sub-processors. Through this methodology we attempt to separate the individual problem-solving component from the larger process of collaboration.
keywords	CSCW; Group Work; Design; Expertise; Collaboration; Novice
series	other
email
last changed	2002/11/15 18:29

_id	8b8e
authors	Kvan, Th., Wong, J.T.H. and Vera, A.H.
year	2000
title	Supporting Structural Activities in Design: A Multiple-Case Study
source	Proceedings, Fifth International Conference on Computer Supported Cooperative Work in Design (CSCWD2000), Hong Kong, November 29 – December 2, 2000, pp. 116-120
summary	This paper describes case studies in design teaching and their analysis; examining the role of structural activities and other solution searching activities in design learning and problem solving. The case studies follow students working on the same problem under two conditions – one group is taught using traditional face-to-face teaching while the other group is supported by a text-based web board. The design activities of two students were followed in each condition through a semester; followed by in-depth interviews at the end of semester. Interviews and logs were coded according to an activity-based model of design activity. The results show that cases with above average design work involved more structural activities than the mediocre cases. It also showed that design problem dissections are more organized in the better cases. These successful cases engaged in textual expression of their design solutions. Computer tools for design should therefore support textual representation in addition to graphic; video or audio.
keywords	Collaborative Design; Computer Supported Collaborative Work; Structure Activities; Text
series	other
email
last changed	2002/11/15 18:29

_id	ec9c
authors	Kvan, Th., Wong, J.T.H. and Vera, A.H.
year	2003
title	THE CONTRIBUTION OF STRUCTURAL ACTIVITIES TO SUCCESSFUL DESIGN
source	International Journal of Computer Applications in Technology , 16:2/3, pp. 122-126
summary	Examining case studies in design teaching and their analysis; we identify the role of structural activities and other solution searching activities in design learning and problem solving. The case studies follow students working on the same problem under two conditions – one group is taught using traditional face-to-face teaching while the other group is additionally supported by a text-based web board. The design activities of two students were followed in each condition through a semester; followed by in-depth interviews at the end of semester. The results show that cases with above average design work involved more structural activities than the mediocre cases. It also showed that design problem dissections are more organized in the better cases. These successful cases engaged in textual expression of their design solutions. Computer tools for design should therefore support multiple representations of design work.
keywords	Structure Activity; Representation; Text; Models; Teaching; Learning
series	journal paper
type	normal paper
email
last changed	2004/09/24 14:39

_id	e322
id	e322
authors	Achten, H.H., Dorst, K., Stappers, P.J. and de Vries, B.
year	2005
title	A DECADE OF DESIGN RESEARCH IN THE NETHERLANDS
source	Achten, H.H., Dorst, K. Stappers, P.J. and de Vries, B. (eds.) Design Research in the Netherlands 2005, i-vii
series	book
type	normal paper
email
more	http://www.designresearch.nl/PDF/DRN2005_AchtenDorstStapperDeVries_Introduction.pdf
last changed	2005/10/12 15:52

_id	2005_083
id	2005_083
authors	Agostinho, Francisco Santos
year	2005
title	Architecture as Drawing, Perception and Cognition
doi	https://doi.org/10.52842/conf.ecaade.2005.083
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 83-90
summary	This work is about realizing that human perception is inherent to architecture. It is an asset and a trait subject to training and development in an empirical way, involving physical and manual action. It cannot be taught literally through convention and logic reasoning. It is a human achievement of great significance built on intellectual and scientific knowledge. It is something, being physical and empirical, that is supported on instrumental procedure. The computer, as a machine and an instrument, does not shorten the empirical experience of manipulation; on the contrary, it enhances J.J. Gibson’s findings about the perception of space in relation to eye and body movement. Being a cybernetic machine the computer may, and shall, evolve, and become perceptive. In order for that to happen, it is important to keep in mind the mechanism of human perception. Through producing a computerized model of a major architectural work, we develop natural knowledge about its physical features and the thought that lies underneath. To be able to use the computer as an instrument provides a user with explicit knowledge about its ways and mechanism that has to be made available. It involves training, which is to a great extent self-explanatory, and also explicit knowledge about the conventions that are being used, such as programming, reasoning and trigonometry.
keywords	Visualization; Environmental Simulation; Knowledge Modelling (KM); 3D Modeling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_331
id	2005_331
authors	Al-Douri, Firas A., Clayton, Mark J. and Abrams, Robin F.
year	2005
title	The Impact of 3D Digital Modeling on the 3D Design Aspects in Urban Design Plans
doi	https://doi.org/10.52842/conf.ecaade.2005.331
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 331-340
summary	Some experts suggest that urban design plans in US cities may lack adequate coverage of the three-dimensional design aspects of the built environment. 3D digital models may help designers visualize and interact with design alternatives, large urban data sets, and 3D information more effectively, thus correcting this problem. Case studies of recent urban design plans that have used 3D digital models may indicate whether these technologies can increase the quality of the plan. This research discusses the role 3D urban models can play in supporting designers in addressing the 3D design aspects. A literature review focused on reviewing secondary sources to construct or adopt theoretical propositions against which the empirical data can be compared and contrasted. A case study involved investigating the methods with which 3D models have been used in developing a selected urban design plan. The content analysis of the case study refuted the premise that the plan would inadequately address 3D aspects and utilize 3D information, and indicated an effective usage of 3D modeling to analyze and represent most of the 3D and 2D information elements and issues. The results are consistent with a hypothesis that the effective usage of 3D modeling would result in the effective coverage of 3D information and issues. The effective usage of the model’s functionalities has improved the quality of the decision-making process through improving designers’ cognitive capabilities and providing a platform for communicating design ideas among and across design teams.
keywords	3D Modeling; Urban Design Plans; Digital Models; 3D Design Aspects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
doi	https://doi.org/10.52842/conf.caadria.2014.285
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	2005_665
id	2005_665
authors	Brito, Tiago, Fonseca, Manuel J. and Jorge, Joaquim A.
year	2005
title	DecoSketch – Towards Calligraphic Approaches to Interior Design
doi	https://doi.org/10.52842/conf.ecaade.2005.665
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 665-670
summary	Computer-Aided Design tools have long played an important role in architecture design. However, we need to go beyond direct manipulation to devise new tools that will expedite the interior design and decoration. Indeed, conventional CAD systems, while providing ever increasing functionality, do not provide equal support to the drafting and drawing tasks. This makes even the simplest drawings a complicated endeavor. Draftspeople struggle with different concepts that those learnt from their earlier days in school and have to think long and hard to translate familiar sequences of operations to commands which require navigating a dense jungle of menus. The term calligraphic interfaces was coined by us to designate a large family of applications organized around the drawing paradigm, using a digital stylus and a tablet-and-screen combination as seen most recently in Tablet PCs®. Using these, users can enter drawings in a natural manner, largely evocative of drafting techniques that were perfected for pencil-and-paper media. This paper presents a simple calligraphic interface to explore interior design literally from the ground up. The Decosketch application is a modeling and visualization tool structured around 2 _D architectural plants. Its purpose is to help architects or customers easily creating and navigating through house designs starting from the floorplan and moving to their three-dimensional representation. Moreover, both 2D and 3D representations can be independently edited, providing a natural interface that tries to adhere to well-known representations and idioms used by architects when drafting using pencil and paper.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2011_122
id	ecaade2011_122
authors	Chronis, Angelos; Jagannath, Prarthana; Siskou, Vasiliki Aikaterini; Jones, Jonathan
year	2011
title	Sensing digital co-presence and digital identity: Visualizing the Bluetooth landscape of the City of Bath
doi	https://doi.org/10.52842/conf.ecaade.2011.087
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.87-92
summary	The impact of ubiquitous digital technologies on the analysis and synthesis of our urban environment is undoubtedly great. The urban topography is overlaid by an invisible, yet very tangible digital topography that is increasingly affecting our urban life. As W. J. Mitchell (Mitchell 2005) pointed out, the digital revolution has filled our world with “electronic instruments of displacement” that “embed the virtual in the physical, and weave it seamlessly into daily urban life”. The mobile phone, the most integrated mobile device is closely related to the notion of a digital identity, our personal identity on this digital space. The Bluetooth is the mainly used direct communication protocol between mobile phones today and in this scope, each device has its own unique ID, its “MAC address”. This paper investigates the potential use of recording and analysing Bluetooth enabled devices in the urban scale in understanding the interrelation between the physical and the digital topographies.
wos	WOS:000335665500009
keywords	Pervasive systems; digital presence; urban encounter; digital identity
series	eCAADe
email
last changed	2022/05/01 23:21

_id	sigradi2005_103
id	sigradi2005_103
authors	Clayton, Mark J.
year	2005
title	Computational design and AutoCAD: reading software as oral history
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 103-107
summary	Although the user interface and operation of AutoCAD may seem counter to architectural predilections, the software can be better understood in a historical context of themes of computational design, automated production drawings, and design graphics. Current interest in Building Information Modeling draws upon themes in architectural computing established 40 years ago and expressed in AutoCAD throughout its 25 year history.
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	acadia05_094
id	acadia05_094
authors	Clayton, Mark J.
year	2005
title	How I Stopped Worrying and Learned to Love AutoCAD
doi	https://doi.org/10.52842/conf.acadia.2005.094
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 94-103
summary	The history of computing is expressed through AutoCAD as an accretion of ideas and inventions, each of which was a breakthrough in its time. Learning to use AutoCAD, or any CAD system, is augmented by an understanding of the historical context of its development. In contrast to a “deconstructivist” criticism of AutoCAD that avoids all historical context, this paper discusses the user interface of AutoCAD placed in its historical context by combining facts of history with personal reminiscences. The paper answers mysteries about AutoCAD such as “Why a black screen?”, “Why LISP?”, “Why a command line?”, “Why layers, pens and line types?”, and “Why 2D?” An understanding of context and history is a starting point for understanding, mastering, and improving software.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	acadia05_114
id	acadia05_114
authors	Due Schmidt, Anne Marie
year	2005
title	Navigating towards digital tectonic tools
doi	https://doi.org/10.52842/conf.acadia.2005.114
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 114-127
summary	The computer holds a great potential to break down the barriers between architecture and the technical aspects relating to architecture, thus supporting innovative architecture with an inner correspondence between form and technique. While the differing values in architecture and technique can seem like opposites, the term tectonics deals with creating a meaningful relationship between the two. The aim of this paper is to investigate what a digital tectonic tool could be and what relationship with technology it should represent. An understanding of this relationship can help us not only to understand the conflicts in architecture and the building industry but also bring us further into a discussion of how architecture can use digital tools. The investigation is carried out firstly by approaching the subject theoretically through the term tectonics and by setting up a model of the values a tectonic tool should encompass. Secondly the ability and validity of the model are shown by applying it to a case study of Jørn Utzon’s work on Minor Hall in Sydney Opera House - for the sake of exemplification the technical field focused on in this paper is room acoustics. Thirdly the relationship between the model of tectonics and the case will be compared and lastly a discussion about the characteristics of a tectonic tool and its implications on digital tectonic tools will be carried out.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	sigradi2005_700
id	sigradi2005_700
authors	Espina, Jane J. B.
year	2005
title	VISION OR RETROSPECTION INTO THE PAST: SCIENTIFIC VISUALIZATION IN THE RECOVERY OF PATRIMONIAL URBAN SPACES
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 700-706
summary	This paper shows the use of digital means in the presentation and relation between the perception of those who have walked by in the past and circulate at present through the Baralt Square space, at specific historic periods, with the purpose of reconstructing the different urban scenarios, and foresee their future, through the use of scientific visualization. The digital reconstruction of the square, of colonial origin, is a complex process. This multifunctional space represented forms and types of societies, as the various actors participated with perceptions and perspectives which were apart from reality, imposing their vision and interests, defining themselves in the materialization of the space-site. This research originates the urban analysis and the interpretation of the public space with the help of input devices and real-time visualizers. Interaction, virtual surroundings and mixed reality technologies may contribute in designing tools for the recovery of patrimonial surroundings. [Full paper in Spanish]
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:51

_id	2005_139
id	2005_139
authors	Ham, Jeremy J.
year	2005
title	Music and Architecture: from Digital Composition to Physical Artifact
doi	https://doi.org/10.52842/conf.ecaade.2005.139
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 139-146
summary	This paper addresses how relationships between music and architecture can be explored within the design studio through a series of digital games and projects and culminating in the actual construction of small-scale architecture. Through the examination of music and architecture, students are provided with valuable opportunities for authentic learning opportunities relating to digital mastery, teamwork, tectonics, the role of digital technologies in the design and construction process and the translation of an architectural concept relating to composition to a physical artifact.
keywords	Music, Architecture, Real-Scale Modeling, the Design Studio
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cf2005_1_53_133
id	cf2005_1_53_133
authors	HERR Christiane M. and KVAN Thomas
year	2005
title	Using Cellular Automata to Generate High-Density Building Form
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 249-258
summary	This paper presents an investigation into the use of cellular automata systems for the design of high-density architecture for Asian cities. In this architectural context, urban form is shaped by architectural solutions that are developed in a copy-and-paste manner. To this background, cellular automata are introduced and discussed with respect to the specific potential of cellular systems to support architectural design addressing large projects as well as cost and speed constraints. Previous applications of cellular automata to architectural design have been conceptual and are typically limited by the rigidity of classical automata systems as adopted from other fields. This paper examines the generative design potential of cellular automata by applying them to the re-modelling of an existing architectural project. From this application it is concluded that cellular automata systems for architectural design can benefit from challenging and adapting classic cellular automata features, such as uniform volumetric high-resolution models and globally consistent rule execution. A demonstration example is used to illustrate that dynamic, state-dependent geometries can support an architectural design process.
keywords	cellular automata, high density architecture, urban morphology, generative design
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	2d39
id	2d39
authors	Heylighen A, Heylighen F, Bollen J, Casaer M
year	2005
title	A DISTRIBUTED MODEL FOR TACIT DESIGN KNOWLEDGE EXCHANGE
source	SID 2005, Proceedings of the 4th Social Intelligence Design Workshop, Stanford University, March 2005 (CD Rom)
summary	The distributed cognition approach, and by extension the domain of social intelligence design, attempts to integrate three until recently separate realms: mind, society, and matter. The field offers a heterogeneous collection of ideas, observations, and case studies, yet lacks a coherent theoretical framework for building models of concrete systems and processes. Despite the intrinsic complexity of integrating individual, social and technologically-supported intelligence, the paper proposes a relatively simple ‘connectionist’ framework for conceptualizing a distributed cognitive system. This framework represents shared information sources (documents) as nodes connected by links of variable strength, which increases interactively with the number of co-occurrences of documents in the patterns of their usage. This connectionist learning procedure captures and uses the implicit knowledge of its community of users to help them find relevant information, thus supporting an unconscious form of exchange. The principles are illustrated by an envisaged application to a concrete problem domain: the dynamic sharing of design knowledge among a multitude of architects through a database of associatively connected building projects.
keywords	connectionism, distributed cognition, tacit knowledge, architectural design
series	other
type	normal paper
email
last changed	2005/04/01 13:24

_id	cf2005_2_62_18
id	cf2005_2_62_18
authors	HUBERS Hans
year	2005
title	Parametric Design in Protospace 1.1
source	Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 255-264
summary	After a history of CAAD in the Netherlands, the author describes the CAVE-like facility that is being set up to support collaborative design. The first prototype, Protospace 1.1 has been tested. Protospace is a project of the Hyperbody Research Group, directed by Prof. Kas Oosterhuis. The state of the art of parametric design and some helpful tools to speed-up the design process are discussed. 3D multiplayer game software Virtools is used to develop synchronic and a-synchronic, local and inter-local collaboration.
keywords	3D modelling, collaborative design, design methodology, virtual design studio, parametric design
series	CAAD Futures
email
last changed	2005/05/05 07:06

For more results click below: