Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 3964

Reformat results as: short short into frame detailed detailed into frame

_id	e322
id	e322
authors	Achten, H.H., Dorst, K., Stappers, P.J. and de Vries, B.
year	2005
title	A DECADE OF DESIGN RESEARCH IN THE NETHERLANDS
source	Achten, H.H., Dorst, K. Stappers, P.J. and de Vries, B. (eds.) Design Research in the Netherlands 2005, i-vii
series	book
type	normal paper
email
more	http://www.designresearch.nl/PDF/DRN2005_AchtenDorstStapperDeVries_Introduction.pdf
last changed	2005/10/12 15:52

_id	2005_000
id	2005_000
authors	Duarte, José Pinto, Ducla-Soares, Gonçalo and Sampaio, A. Zita (Eds.)
year	2005
title	Digital Design: The Quest for New Paradigms
source	23nd eCAADe Conference Proceedings [ISBN 0-9541183-3-2], Lisbon (Portugal) 21-24 September 2005, 880 p.
doi	https://doi.org/10.52842/conf.ecaade.2005
summary	As the field of computer-aided design evolved over the last thirty years or so, it has witnessed five changes of emphasis in research direction. In the first stage, the use of computers in architecture focused on the development of Computer Aided Design (CAD), that is, systems that simulated the use of drafting tools, and research was mainly concerned with the satisfaction of designers' ergonomic needs. In the second stage, there were efforts to use computer tools in non-graphical aspects of designing, such as the use of Data Base Management Systems (DBMS) in the quantity survey of buildings. The concern was to satisfy the cognitive needs of designers by focusing on the way information and knowledge were perceived, acquired, stored, and processed. In the third stage, the focus shifted to the development of realistic models of buildings to permit the assessment of design proposals. In the fourth stage, the focus was on studies concerned with the encoding of architectural knowledge into design tools (KBMS), and the discussion was whether to go towards design automation or design supporting tools. In the fifth stage, with the advent of the Internet and the development of communication tools, research became focused on the collaborative and social aspects of design activity. In recent years, research also became concerned with the exploration of the physical implications of digital media in the production of artefacts. Today, there is a vast range of research interests and approaches, but the quest for new, unifying paradigms continues.
series	eCAADe
type	normal paper
email
more	http://www.ecaade.org
last changed	2022/06/07 07:49

_id	2005_173
id	2005_173
authors	Leeuwen, Jos van, Gassel, Frans van and Otter, Ad den
year	2005
title	Collaborative Design in Education
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 173-180
doi	https://doi.org/10.52842/conf.ecaade.2005.173
summary	Collaboration in design can take place in a physical, social space, in a distributed or virtual environment, or in a combination of both. Design teams use a range of ICT means to support both synchronous and asynchronous communication. While these tools are designed to facilitate collaboration, the collaboration process still requires planning and organisation in a social context, which are activities that students and professionals need to learn. In current practice there is a need for designers and design managers who have the competences to collaborate in design and to organise distributed collaboration processes. At the department of Architecture, Building, and Planning at Eindhoven University of Technology, we have developed a course on Collaborative Design in the Master of Science curriculum. This course addresses both the organisational, social, and technical issues of collaboration in design. The paper introduces the objectives and educational methods used in this course. It describes the experiences of both teachers and students that were gained now that the course was taught in three subsequent years.
keywords	Collaborative Design, Multi-disciplinary Design, Computer Support for Collaborative Working, Education, Design Management
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ddss2006-hb-187
id	DDSS2006-HB-187
authors	Lidia Diappi and Paola Bolchi
year	2006
title	Gentrification Waves in the Inner-City of Milan - A multi agent / cellular automata model based on Smith's Rent Gap theory
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 187-201
summary	The aim of this paper is to investigate the gentrification process by applying an urban spatial model of gentrification, based on Smith's (1979; 1987; 1996) Rent Gap theory. The rich sociological literature on the topic mainly assumes gentrification to be a cultural phenomenon, namely the result of a demand pressure of the suburban middle and upper class, willing to return to the city (Ley, 1980; Lipton, 1977, May, 1996). Little attempt has been made to investigate and build a sound economic explanation on the causes of the process. The Rent Gap theory (RGT) of Neil Smith still represents an important contribution in this direction. At the heart of Smith's argument there is the assumption that gentrification takes place because capitals return to the inner city, creating opportunities for residential relocation and profit. This paper illustrates a dynamic model of Smith's theory through a multi-agent/ cellular automata system approach (Batty, 2005) developed on a Netlogo platform. A set of behavioural rules for each agent involved (homeowner, landlord, tenant and developer, and the passive 'dwelling' agent with their rent and level of decay) are formalised. The simulations show the surge of neighbouring degradation or renovation and population turn over, starting with different initial states of decay and estate rent values. Consistent with a Self Organized Criticality approach, the model shows that non linear interactions at local level may produce different configurations of the system at macro level. This paper represents a further development of a previous version of the model (Diappi, Bolchi, 2005). The model proposed here includes some more realistic factors inspired by the features of housing market dynamics in the city of Milan. It includes the shape of the potential rent according to city form and functions, the subdivision in areal submarkets according to the current rents, and their maintenance levels. The model has a more realistic visualisation of the city and its form, and is able to show the different dynamics of the emergent neighbourhoods in the last ten years in Milan.
keywords	Multi agent systems, Housing market, Gentrification, Emergent systems
series	DDSS
last changed	2006/08/29 12:55

_id	caadria2006_443
id	caadria2006_443
authors	M.W. KNIGHT, A.G.P. BROWN, J.S. SMITH
year	2006
title	DIGITAL TERRAIN MESHES FROM GPS IN URBAN AREAS: A Practical Aid to City Modelling
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 443-451
doi	https://doi.org/10.52842/conf.caadria.2006.x.a6t
summary	The work presented here brings together two core interests that have been developed by the first two authors over recent years. The first is the development of city models for use in a range of applications where different data sets and different levels of detail may be appropriate. The second is the development of low cost systems that can deliver useful tools to help address Computer Aided Architectural Design problems. In addition the involvement of a colleague in Electrical Engineering and Electronics reflects a long standing belief in the benefits of cross-disciplinary and interdisciplinary work between architecture and parallel research fields. The product of the collaboration is a system that can aid in the production of terrain models that, in our case, are particularly important as the base for a city model (Brown et.al, 2005).
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	cf2005_2_53_169
id	cf2005_2_53_169
authors	VAN LEEUWEN Jos, JESSURUN Joran and JANSEN Glenco
year	2005
title	Searching with Experience
source	Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 203-214
summary	This paper describes the motivation and development of a new algorithm for ranking web pages. This development aims to enable the implementation of a search engine that can provide highly personalised results to queries. It was initiated by a request from the Dutch CAD industry, but has generic potential for the development of web search engines. The paper describes the algorithm, its position in relation with existing algorithms, and its potential drawbacks and advantages.
keywords	search engine, page ranking, product information, construction supply chain, machine learning
series	CAAD Futures
email
last changed	2005/05/05 07:06

_id	sigradi2009_821
id	sigradi2009_821
authors	Beirão, José Nuno; Nuno Montenegro; Jorge Gil; José P. Duarte; Rudi Stouffs
year	2009
title	The city as a street system: A street description for a city ontology
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The street system is an important component of the city ontology created for a generative urban design tool and should be able to integrate the many visions or interpretations that designers or other urban design agents may have about streets. This paper describes several characteristics of the street system, with its components organized into object classes which are the shape sets of algebras used by a generation module to generate street network representations that can be assessed by a GIS platform.
keywords	Ontology; urban design; shape grammars; planning
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	diss_duarte
id	diss_duarte
authors	Duarte, J. P.
year	2001
title	Customizing mass housing: a discursive grammar for Siza’s Malagueira houses
source	PhD dissertation, Department of Architecture, Massachusetts Institute of Technology, Cambridge, Mass
summary	This thesis proposes a process of providing mass-customized housing based on computer-aided design and production systems. It focuses on the design part, which mainly consists of an interactive system for the generation of design solutions based on a mathematical model called discursive grammar. A discursive grammar includes a shape grammar, a description grammar, and a set of heuristics. The shape grammar provides the rules of formal composition, whereas the description grammar describes the design from other relevant viewpoints. The set of heuristics is used to guide the generation of designs by comparing the description of the evolving design with the description of the desired house. The generation of a design proceeds first by producing a design brief from the user-prompted requirements and then by finding a solution that satisfies this brief. Search is largely deterministic, which decreases the amount of time required to find a solution, thereby making it reasonable to develop Web-based implementations. The proposed model enables an enduring designer's dream, that of the mass customization of housing. The model is illustrated with a case study that includes a shape grammar developed for the houses designed by the architect Alvaro Siza at Malagueira, a description grammar based on the Portuguese housing regulations, and a set of heuristics inferred after a set of experiments. In these experiments, designers were asked to generate houses based on the Malagueira grammar for specific clients. It is argued that this discursive grammar provides a rigorous method for understanding and teaching Siza's design process and that similar grammars could be developed for other styles. A Web page for explaining the grammar and generating new designs on-line was developed as a prototype.
series	thesis:PhD
email
last changed	2005/09/09 12:58

_id	54b0
authors	Duarte, J.P., Heitor, M. and Mitchell, W.J.
year	2002
title	The Glass Chair - Competence Building for Innovation
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 180-185
doi	https://doi.org/10.52842/conf.ecaade.2002.180
summary	This paper tells the strange tale of a glass chair. Creating a glass chair might seem a perverse – maybe impossible – enterprise. After all, chairs are normally held together by moment connections, such as those joining the legs to the seat. Glass is a notoriously bad material for forming moment connections; it is brittle, and quickly snaps if you subject it to bending. But there are advantages to such startling formulations of design problems. They force you to challenge conventional wisdom, to ignore standard prototypes, and to ask interesting new questions. How might you design a chair without moment connections? How might you do so without making the result impossibly heavy? How would you built it? And what interesting qualities might such a chair have? These were questions investigated in the design project pursued jointly by students at an American and a Portuguese school, in collaboration with glass and molding fabricators. The students explored many possibilities, and in doing so learned a great deal about chairs and about the properties and potentials of glass. The final project is a particularly elegant outcome of their investigations. It is created from just two curved pieces of glass, which held together by metal tie-rods. In the end, the finished glass chair looked just like the initial computer visualizations.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	2005_083
id	2005_083
authors	Agostinho, Francisco Santos
year	2005
title	Architecture as Drawing, Perception and Cognition
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 83-90
doi	https://doi.org/10.52842/conf.ecaade.2005.083
summary	This work is about realizing that human perception is inherent to architecture. It is an asset and a trait subject to training and development in an empirical way, involving physical and manual action. It cannot be taught literally through convention and logic reasoning. It is a human achievement of great significance built on intellectual and scientific knowledge. It is something, being physical and empirical, that is supported on instrumental procedure. The computer, as a machine and an instrument, does not shorten the empirical experience of manipulation; on the contrary, it enhances J.J. Gibson’s findings about the perception of space in relation to eye and body movement. Being a cybernetic machine the computer may, and shall, evolve, and become perceptive. In order for that to happen, it is important to keep in mind the mechanism of human perception. Through producing a computerized model of a major architectural work, we develop natural knowledge about its physical features and the thought that lies underneath. To be able to use the computer as an instrument provides a user with explicit knowledge about its ways and mechanism that has to be made available. It involves training, which is to a great extent self-explanatory, and also explicit knowledge about the conventions that are being used, such as programming, reasoning and trigonometry.
keywords	Visualization; Environmental Simulation; Knowledge Modelling (KM); 3D Modeling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ac12
id	ac12
authors	Akin, Ö.; R. Krishnamurti, K.P. Lam (eds)
year	2005
title	Generative CAD Systems
source	Singapore: Carnegie Mellon University, 2005
summary	In the new millennium, Computer Aided Design has emerged as the most potent technological innovation in design. As BIM promises to integrate design tasks vertically and horizontally through graceful data exchange, new frontiers appear to researchers and practitioners as potential watershed events of the next decade. Generative approaches, a venerable engagement of computational design, is emerging as one of these. The proceedings of the Generative CAD Symposium held at Carnegie Mellon University, both summarizes the three decades of work in this area and reveals the beginnings of research and application expected in this domain. After all, will designers be able to effortlessly and intelligently generate potential design solutions that respond to appropriate design requirements and designers’ intentions?
series	book
type	normal paper
email
more	http://www.andrew.cmu.edu/user/oa04/publications_books.html
last changed	2008/09/04 07:18

_id	2005_331
id	2005_331
authors	Al-Douri, Firas A., Clayton, Mark J. and Abrams, Robin F.
year	2005
title	The Impact of 3D Digital Modeling on the 3D Design Aspects in Urban Design Plans
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 331-340
doi	https://doi.org/10.52842/conf.ecaade.2005.331
summary	Some experts suggest that urban design plans in US cities may lack adequate coverage of the three-dimensional design aspects of the built environment. 3D digital models may help designers visualize and interact with design alternatives, large urban data sets, and 3D information more effectively, thus correcting this problem. Case studies of recent urban design plans that have used 3D digital models may indicate whether these technologies can increase the quality of the plan. This research discusses the role 3D urban models can play in supporting designers in addressing the 3D design aspects. A literature review focused on reviewing secondary sources to construct or adopt theoretical propositions against which the empirical data can be compared and contrasted. A case study involved investigating the methods with which 3D models have been used in developing a selected urban design plan. The content analysis of the case study refuted the premise that the plan would inadequately address 3D aspects and utilize 3D information, and indicated an effective usage of 3D modeling to analyze and represent most of the 3D and 2D information elements and issues. The results are consistent with a hypothesis that the effective usage of 3D modeling would result in the effective coverage of 3D information and issues. The effective usage of the model’s functionalities has improved the quality of the decision-making process through improving designers’ cognitive capabilities and providing a platform for communicating design ideas among and across design teams.
keywords	3D Modeling; Urban Design Plans; Digital Models; 3D Design Aspects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
doi	https://doi.org/10.52842/conf.caadria.2014.285
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2005_1
id	caadria2005_1
authors	Anand Bhatt (ed.)
year	2005
title	CAADRIA '05
source	Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 81-902816-0-7 / New Delhi India) 28-30 April 2005, 472 p. [vol. 1] / 515 p. [vol. 2]
doi	https://doi.org/10.52842/conf.caadria.2005.
summary	anand.bhatt@ab-a.net
series	CAADRIA
last changed	2022/06/07 07:54

_id	sigradi2005_000
id	sigradi2005_000
authors	Angulo, Antonieta and Vásquez de Velasco, Guillermo (eds.)
year	2005
title	SiGradi2005: Vision and Visualization
source	Proceedings of the 9th Iberoamerican Congress of Digital Graphics Graphics / ISBN 978-1-59975-306-5] Lima (Perú) 21-23 november 2005, 826 p.
summary	Paradoxically, one of the most difficult but enjoyable things we do is to imagine. To open the eyes of our mind and see what no one else can see. We see images of things that are yet to be and through the same skill we devise ways in which to make them happen. We design the future in the form of environments, graphics, products, films, and a growing range of new media. Our ability to develop a vision and to visualize it is a gift that we are called to cultivate and put to good use. We have been privileged with a great responsibility. In the process of developing a vision and communicating that vision to others, we “visualize”. Visualization can be a very private experience in which we are alone with mental images that help us shape our vision. In other instances visualization can be a component of mass communication. Visualization can be a means or can be an end. It can be a small architectural sketch on a paper napkin or a mega-graphic covering a high-rise building, an airplane or a ship. In every case, the relationship between vision and visualization is a mutually supportive articulation of what our eyes and our minds can see. Our vision of the role of computers in the art and science of visualization is in constant development. Computer visualization can support an intimate dialog between a designer and his/her vision. It can translate and communicate that vision to a larger audience and in the hands of a new-media artist it can actually constitute his/her vision. The 9th Annual Conference of SIGraDI (Ibero American Society for Computer Graphics) will explore our collective vision on the future of digital visualization and digital media in Environmental Design, Product Design, Graphic Design, Cinematography, New Media, and Art. Authors are invited to share their research work with a focus on how it contributes to shape a collective understanding of the past, awareness of the present, and vision of the future in our multiple disciplines.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia05_000
id	acadia05_000
authors	Ataman, Osman (Ed.)
year	2005
title	Smart Architecture: Integration of Digital and Building Technologies
source	Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8, ISavannah (Georgia) 13-16 October 2005, 259 p.
doi	https://doi.org/10.52842/conf.acadia.2005
summary	Recent developments in digital technologies and smart materials have created new opportunities and are suggesting significant changes in the way we design and build architecture. Traditionally, however, there has always been a gap between the new technologies and their applications into other areas. Even though, most technological innovations hold the promise to transform the building industry and the architecture within, and although, there have been some limited attempts in this area recently; to date architecture has failed to utilize the vast amount of accumulated technological knowledge and innovations to significantly transform the industry. Consequently, the applications of new technologies to architecture remain remote and inadequate. Although, there have been some adaptations in this area recently, the improvements in architecture reflect only incremental progress, not the significant discoveries needed to transform the industry.
series	ACADIA
email
more	http://www.acadia.org
last changed	2022/06/07 07:49

_id	2005_557
id	2005_557
authors	Barelkowski, Robert
year	2005
title	Web-based Social Participation in the Process of Town Planning
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 557-564
doi	https://doi.org/10.52842/conf.ecaade.2005.557
summary	The paper discusses the principles of using internet nested “Citizen” system that composes the platform to exchange information between different participants of planning procedure. As a part of P.R.S. method instrumentation, “Citizen” allows multidirectional interaction of planners, authorities and users of space. The paper shows various aspects of system structure, pointing out the most significant application abilities, the role different contents of the system play and services they provide to participants. The article summarizes the results of application, discusses the impact, web-based social participation has on efficiency of planning procedure, elimination of conflicts and understanding of planning problematics.
keywords	Web-Based Planning Support, Programming Implementations for TownPlanning, User Participation
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	2005_491
id	2005_491
authors	Beirão, José and Duarte, José
year	2005
title	Urban Grammars: Towards Flexible Urban Design
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 491-500
doi	https://doi.org/10.52842/conf.ecaade.2005.491
summary	Traditional urban plans have definitive design systems, without the flexibility required to deal with the complexity and change that characterise contemporary urban societies. To provide urban plans with increased flexibility, it is proposed a design methodology capable of producing various design solutions instead of a specific definitive design. The methodology uses shape grammars as a process for generating urban design. In this approach, design becomes a system of solutions rather than a specific one. Through the analyses of a group of urban plans, a design methodology was sketched in which rules are used to enable more flexibility. These plans where chosen for their perceived qualities in terms of language, planning efficiency, and latent flexibility. As a result, a four-phased methodology was identified and thus, proposed for designing urban plans. This methodology was then combined with shape grammars and tested in a design studio setting. Students were asked to use the methodology and shape grammars as auxiliary instruments in the design of a flexible plan for a new town. In the following year, to simulate real-world conditions and oblige students to consider urban ordering and scale, work was structured differently. First, students were asked to develop a rule-based urban plan as in the previous year. Second, they were asked to conceive a detail plan for a sector of an urban plan defined by another group of students following its rules. The plans were then analysed with the goal of refining the methodology. Results show that shape grammars produce urban plans with non-definitive formal solutions, while keeping a consistent spatial language. They also provide plans with explicit and implicit flexibility, thereby giving future designers a wider degree of freedom. Finally, they provide students with a concrete methodology for approaching urban design and foster the development of additional designing skills.
keywords	Shape Grammars, Flexible Urban Design
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: