Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1361

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2016_611
id	caadria2016_611
authors	Dritsas, Stylianos
year	2016
title	An Advanced Parametric Modelling Library for Architectural and Engineering Design
doi	https://doi.org/10.52842/conf.caadria.2016.611
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 611-620
summary	This paper presents a design computation system support- ing scientific computing methods relevant to architectural and engi- neering design under the paradigm of visual programming. The objec- tive of this research work is to expand and advance the palette of methods employed in academic and professional design environments. The tools contain methods for linear algebra, non-linear solvers, net- work analysis and algorithms for classical operational research prob- lems such as cutting and packing, clustering and routing. A few dec- ades ago the idea that computing would become so pervasive in the realm of architecture and engineering as it is today was confronted with deep scepticism. The thesis of this paper is that while it may be equally implausible that such methods are relevant today it may be the next natural evolution in the direction of design computation. The cur- rent state of the presented software package is still in early alpha ver- sion and it is available online for evaluation.
keywords	Design computation; parametric modelling; visual programming
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2023_138
id	ecaade2023_138
authors	Crolla, Kristof and Wong, Nichol
year	2023
title	Catenary Wooden Roof Structures: Precedent knowledge for future algorithmic design and construction optimisation
doi	https://doi.org/10.52842/conf.ecaade.2023.1.611
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 611–620
summary	The timber industry is expanding, including construction wood product applications such as glue-laminated wood products (R. Sikkema et al., 2023). To boost further utilisation of engineered wood products in architecture, further development and optimisation of related tectonic systems is required. Integration of digital design technologies in this endeavour presents opportunities for a more performative and spatially diverse architecture production, even in construction contexts typified by limited means and/or resources. This paper reports on historic precedent case study research that informs an ongoing larger study focussing on novel algorithmic methods for the design and production of lightweight, large-span, catenary glulam roof structures. Given their structural operation in full tension, catenary-based roof structures substantially reduce material needs when compared with those relying on straight beams (Wong and Crolla, 2019). Yet, the manufacture of their non-standard geometries typically requires costly bespoke hardware setups, having resulted in recent projects trending away from the more spatially engaging geometric experiments of the second half of the 20th century. The study hypothesis that the evolutionary design optimisation of this tectonic system has the potential to re-open and expand its practically available design solution space. This paper covers the review of a range of built projects employing catenary glulam roof system, starting from seminal historic precedents like the Festival Hall for the Swiss National Exhibition EXPO 1964 (A. Lozeron, Swiss, 1964) and the Wilkhahn Pavilions (Frei Otto, Germany, 1987), to contemporary examples, including the Grandview Heights Aquatic Centre (HCMA Architecture + Design, Canada, 2016). It analysis their structural concept, geometric and spatial complexity, fabrication and assembly protocols, applied construction detailing solutions, and more, with as aim to identify methods, tools, techniques, and construction details that can be taken forward in future research aimed at minimising construction complexity. Findings from this precedent study form the basis for the evolutionary-algorithmic design and construction method development that is part of the larger study. By expanding the tectonic system’s practically applicable architecture design solution space and facilitating architects’ access to a low-tech producible, spatially versatile, lightweight, eco-friendly, wooden roof structure typology, this study contributes to environmentally sustainable building.
keywords	Precedent Studies, Light-weight architecture, Timber shell, Catenary, Algorithmic Optimisation, Glue-laminated timber
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2022_226
id	ecaade2022_226
authors	Hardarson, Matthias K., Larsen, Niels M. and Aagaard, Anders K.
year	2022
title	Kerf Guided Glulam - A novel way of creating curved glulam beams
doi	https://doi.org/10.52842/conf.ecaade.2022.1.085
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 85–90
summary	This paper proposes a novel way of producing curved glulam timber elements where the formwork is integrated into a glulam beam. The method proposed accomplishes this by placing kerf cuts on a timber profile that gets bent and then encased in a wood laminate, forming the glulam beam. The kerf placement allows the beam to be asymmetrically curved. The optimal placement for the kerf cuts is found by feeding an initial goal curve to a form-finding definition that subdivides it and places markers where cuts need to be made while manipulating the beam geometry, ensuring that it matches the initial input curve. The benefit of this method is that it is not reliant on large-scale glulam setups but can be fabricated with basic wood workshop tools in conjunction with a 5-axis CNC mill. The simplified production process enables smaller manufacturers and designers to produce dynamic wooden structures while saving on materials and labour that would have gone into producing formwork that eventually gets discarded.
keywords	Digital Wood Workflows, Kerfs, Glulam, Parametric Design, Digital Fabrication, CNC, Design Democratisation
series	eCAADe
email
last changed	2024/04/22 07:10

_id	ijac20053201
id	ijac20053201
authors	Aitcheson, Robert; Friedman, Jonathan; Seebohm, Thomas
year	2005
title	3-Axis CNC Milling in Architectural Design
source	International Journal of Architectural Computing vol. 3 - no. 2, 161-180
summary	Physical scale models still have a role in architectural design. 3-axis CNC milling provides one way of making scale models both for study purposes and for presentation in durable materials such as wood. We present some types of scale models, the methods for creating them and the place in the design process that scale models occupy. We provide an overview of CNC milling procedures and issues and we describe the process of how one can creatively develop appropriate methods for milling different types of scale models and materials. Two case studies are presented with which we hope to convey not only the range of possible models that can be machined but also the way one creatively explores to arrive at appropriate milling strategies. Where apposite, we compare 3-axis CNC milling to newer technologies used for rapid prototyping but rapid prototyping is not a primary focus.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	sigradi2005_811
id	sigradi2005_811
authors	Amundarain, Iñaki Martín; Víctor Aperribay ; Jesús Mª Alonso ; José Javier San Martín José Ignacio San Martín ; José Mª Arrieta ; Igor Treviño
year	2005
title	Advanced techniques of design in support to medical science: Application to implantological treatments.
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 811-817
summary	At the present time the importance of the image of people plays a key role. Therefore many people who leave these standards wish to change their aesthetic face one, in occasions to look for characteristics that respond to the modern beauty, and in others, to try to solve a medical problem. In the work that is exposed here, the use of the present technological tools of design appears, like support to the scientific development that it makes possible an effectively learn more express and to the students of Odontolgy, improvement of the quality of the treatments of the doctors and help the patients to see beforehand the final results of the operations, avoiding to see disagreeable images. So, the support of the surgical procedures on systems CAD/CAM is making possible the enormous development of medical science, such form that are every time better, more comfortable to learn and are less traumatic for them. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2005_a_7c_a
id	caadria2005_a_7c_a
authors	Anandan Karunakaran
year	2005
title	Organisation of Pedestrian Movements: an Agent-Based Approach
doi	https://doi.org/10.52842/conf.caadria.2005.305
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 305-313
summary	Cities are becoming more complex in this digital era due to technological changes. Thinking of cities without such technological changes is equivalent to an embryonic state in the morphology of city growth, that is, the growth seems less advanced. So it is appropriate to think of the non digital city digitally. Urban design is one state which establishes the perfect relationship between the street, people and building. The relationship of the people with the building and street is becoming one of the key factors in architecture. It has been observed that the design of a city has been influenced by the pedestrian movement. Many cities prior to the industrial era were largely determined by the social interactions based on walking. Thus the pedestrians play a key role in the formation of the city. They are a very important component in any representation of transport movements. They generally terminate or initiate a chain of linked activities, and if observed carefully, a single pedestrian movement is meant to include various sub journeys from one location to another. In order to organize pedestrians, we need to understand the pedestrian movement system. Though there is a lot of development of urban models in this aspect, it is still in a nascent state in comparison with the digital advancement. Thus much research work is carried out which can be applied to any given environmental setting, and as a result urban designers can respond to the changing socio-cultural technologies.
series	CAADRIA
last changed	2022/06/07 07:54

_id	acadia05_236
id	acadia05_236
authors	Brandt, Jordan
year	2005
title	Skin That Fits: Designing and constructing cladding systems with as-built structural data
doi	https://doi.org/10.52842/conf.acadia.2005.236
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 236-245
summary	An awkward interface exists between the structure and skin of complex architecture. The primary structure is typically allowed much higher tolerance ranges than that of the cladding industry, due primarily to the delicate nature of the building envelope which, above all, must prevent water penetration and meet the aesthetic requirements of the architect and client. As architecture has integrated advanced design and fabrication techniques to realize increasingly complex shapes, this problem has been aggravated because of the tangency requirements for high gloss curved finish surfaces and the larger variations found with rolled steel columns and undulating concrete forms. To date, most innovations in this area have been focused upon mechanical connections that can be adjusted and shimmed, thus requiring increased design engineering and on-site labor costs for effective implementation. It would be preferable to manufacture cladding components that are properly adjusted to the actual site conditions, negating the need to predict and accommodate potential dimensional variation with complex connections. The research provides a model for implementing long distance laser scanning technology to facilitate a real-time parametric BIM, herein called an Isomodel.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ad19
id	ad19
authors	Calderon, C., and Noble, R
year	2005
title	BEYOND MODELLING: AVANT-GARDE COMPUTER TECHNIQUES IN RESIDENTIAL BUILDINGS.
source	I Jornadas de Investigacion en Construccion, Madrid, 2-4 June, 2005.
summary	If the result of computer innovations can be interpreted as an emerging “difference” in the quality of constructed space, then in order to truly understand what future applications may be regarding architecture at present, we should look at what advanced functions are available in the process of designing forms and space (DeLuca and Nardini, 2002). Recently the so called parametric approach, a technique for describing a large class of designs with a small description in programming code, has become a focus of attention in architectural computing. In this paper, we reflect on the current use of parametric tools using real case studies as well as our own proof of concept parametric programmes and report on how the avant-garde computer techniques may help to increase the quality of residential building.
keywords	Building Quality, Parametric Design
series	other
type	normal paper
email
last changed	2005/12/02 11:42

_id	sigradi2005_089
id	sigradi2005_089
authors	Caldi, Leonardo
year	2005
title	Ethnomethodology and experience design
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 89-94
summary	Through a reading of the work of David Carson, this article seeks to shed light on certain contributions from ethnomethodology to experience design. Looking form better ways of communicating, Carson – himself a member of the skater and surfer communities with whom he wanted to communicate – advanced a new manner of doing graphic design, effectively challenging established paradigms of visual communication. In our view, Carson made use of ethnomethodology in a special way, based on intuition. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2005_211
id	2005_211
authors	Carrara, Gianfranco and Fioravanti, Antonio
year	2005
title	The Quest for the Holy Grail – Holistic Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.2005.211
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 211-218
summary	Architectural design, due to phenomena such as globalisation of the construction process, delocalisation of professional and industrial activities, spread of new construction materials and components, and the challenges of environmental sustainability, has become so comlex that traditional ways of managing the process are no longer sufficient. What is more, architectural works are required to be ever more performing and integrated - holistic. The paradigm of collaborative design is gaining ground as a way of dealing with these problems. Various process/ product models have been proposed over the years, making more or less use of advanced tools. In this field this study proposes a model in which operators from various cultural contexts are each supported by Intelligent Assistants (agents). The model simulates the design of works of architecture to the best professional practice. Exchange of information and knowledge between the operators is essential to enhance the design process. From this follows the need to interface not just data, but also meanings. This article shows how to improve communications between different applications, used by different operators, so as to integrate information and knowledge, whether formalised or not, in a project managed collaboratively by means of XML.
keywords	Collaborative Design; Design Process Model; Distributed Knowledge Bases; Semantic Interfaces; aecXML
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2006_565
id	caadria2006_565
authors	CHEN CHIEN TUNG
year	2006
title	DESIGN ON SITE: Portable, Measurable, Adjustable Design Media
doi	https://doi.org/10.52842/conf.caadria.2006.x.b7f
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 565-567
summary	Space designers usually look for information on site before proceeding design. They image any possibilities of design, while they are on site. Restricted to traditional design media, if they want to develop their ideas further, they have to go back to desks. This kind of design process can capture only part of information of the site. Why not do some developments directly when designers are on the site? That is the starting point of this paper. The whole situation of site is very complicated, so it is very difficult discussing all the possibilities. In order to understand how to design on site, reducing the variations is needed. Tsai and Chang (2005) proposed a prototype about design on site, which focuses on land forming. So I chose interior as the site to reduce the variation and have more controllable factors. Still there are many factors effecting design on site, scale is very unique and very important factor of them. Beginners are difficult to really feel how long it is on the plan drawing, and even most advanced VR equipment still can’t fully present the rich information on the site. To experience the site though body, the main idea is how to propose a portable device that can support space designer to do design on site directly, with intuitional body movement and precise scale, and get feedback immediately.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	9c37
id	9c37
authors	Coates P, Derix C, Krakhofer S and Karanouh A
year	2005
title	Generating Architectural Spatial Configurations: two approaches using voronoi tessellations and particle systems
source	Proceedings of the Generative Arts conference, Milan, 2005
summary	It was one of the primary goals of the original Master’s programme in Computing and design at UEL in 1991 that we should work towards defining morphological generative processes for the conceptual design of architectural objects. These two papers offer a range of techniques which have been developed by two of this years MSc students (04-05) which show that we are getting close to this. The approaches range from computational geometric approaches (3d parametrics and voronoi diagrams) to emergent spatial organisation using agent based modelling. In many cases the resultant geometry is defined to the point where it can be transferred to advanced evaluation and fabrication systems, thus making this work sufficiently developed to begin to form a useful part in practical design processes.
keywords	morphology, computational geometry, particle systems, physical simulation, voronoi diagrams
series	other
type	normal paper
email
more	http://www.generativeart.com/
last changed	2012/09/20 18:39

_id	ecaaderis2018_103
id	ecaaderis2018_103
authors	Davidová, Marie and Prokop, Šimon
year	2018
title	TreeHugger - The Eco-Systemic Prototypical Urban Intervention
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 75-84
keywords	The paper discusses co-design, development, production, application of TreeHugger (see Figure 1). The co-design among community and trans-disciplinary participants with different expertise required scope of media mix, switching between analogue, digital and back again. This involves different degrees of physical and digital 'GIGA-Mapping' (Sevaldson, 2011, 2015), 'Grasshopper3d' (Davidson, 2017) scripting and mix of digital and analogue fabrication to address the real life world. The critical participation of this 'Time-Based Design' (Sevaldson, 2004, 2005) process is the interaction of the prototype with eco-systemic agency of the adjacent environment - the eco-systemic performance. The TreeHugger is a responsive solid wood insect hotel, generating habitats and edible landscaping (Creasy, 2004) on bio-tope in city centre of Prague. To extend the impact, the code was uploaded for communities to download, local-specifically edit and apply worldwide. Thus, the fusion of discussed processes is multi-scaled and multi-layered, utilised in emerging design field: Systemic Approach to Architectural Performance.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	cf2005_1_82_21
id	cf2005_1_82_21
authors	DE VRIES Bauke and HARINK Jeroen
year	2005
title	Construction Analysis during the Design Process
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 413-422
summary	4D CAD systems are used by contractors for visually checking the construction process. To enable simulation of the construction process, the construction planner links building components from a CAD model with the activities from a project planning. In this paper we describe a method to generate a project planning directly from a CAD model using basic construction knowledge. A case study is discussed briefly to show the current results and the shortcomings. Finally an outlook is presented on a more advanced implementation that is (also) useful for designers.
keywords	4D CAD, design process, construction analysis, automatic planning
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	caadria2005_b_5b_b
id	caadria2005_b_5b_b
authors	Dean Bruton, Arus Kunkhet
year	2005
title	Grammatical Design and Crowd Behaviour: A study of factors that influence human movement in urban spaces
doi	https://doi.org/10.52842/conf.caadria.2005.328x.g4r
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 328-336
summary	Crowd behaviour in traffic and emergency situations has been recorded and documented since the early 1990s, often using digital representations of balls as an indicator of mass and movement. This paper reports the investigation of the factors that influence human movement in urban spaces and visualises the impact on human movements of changes to an urban design space. Using an agent-oriented approach is the common method for investigating the simulation of crowd behaviour. The relation of grammatical design to crowd behaviour is proposed as an important research area. This area developed since the technology for the advanced design visualisation of avatars or animated characters became available. The authors of the software used in Lord of the Rings and other well-known crowd movies have contributed to knowledge of the key issues in crowd behaviour in particular contexts and general situations. This paper relates experiments in teaching grammatical approaches to architectural design with digital media as a tool with three different implementations: a café, restaurant and gallery. Using a variety of design visualisation techniques gives different understandings of the use of a design space. By representing human movement in a design space in more complex visualisations we see more alternatives for better design more readily. Using notions of grammar, contingency and play to explore simple changes in design, the resulting crowd animations present an insightful early research stage experiment with the theories and models of crowd behaviour.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ecaade2024_230
id	ecaade2024_230
authors	Fekar, Hugo; Novák, Jan; Míèa, Jakub; Žigmundová, Viktória; Suleimanova, Diana; Tsikoliya, Shota; Vasko, Imrich
year	2024
title	Fabrication with Residual Wood through Scanning Optimization and Robotic Milling
doi	https://doi.org/10.52842/conf.ecaade.2024.1.025
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 1, pp. 25–34
summary	The project deals with the use of residual wood of tree stumps and roots through scanning, optimization and robotic milling. Wood logging residue makes up to 50 percent of the trees harvested biomass. (Hakkila and Parikka 2002). Among prevailing strategies is leaving residue on site, and recovering residue for bioenergy. (Perlack and others 2005). The project explores the third strategy, using parts of the logging residue for fabrication, which may reduce the overall amount of wood logging volume. Furthermore approach aims for applying residue in its natural form and taking advantage of specific local characteristics of wood (Desch and Dinwoodie 1996). The project applies the strategy on working with stump and roots of an oak tree. Due to considerations of scale, available milling technics and available resources, chosen goal of the approach is to create a functioning chair prototype. Among the problems of the approach is the complex shape of the residue, uneven quality of wood, varying humidity and contamination with soil. After cleaning and drying, the stump is scanned and a 3D model is created. The 3D model od a stump is confronted with a 3D modelled limits of the goal typology (height, width, length, sitting surface area and overal volume of a chair) and topological optimization algorithm is used to iteratively reach the desired geometry. Unlike in established topological optimization proces, which aims for a minimal volume, the project attempts to achieve required qualities with removing minimal amount of wood. Due to geometric complexity of both stump and goal object, milling with an 6axis industrial robotic arm and a rotary table was chosen as a fabrication method. The object was clamped to the board (then connected to a rotary table) in order to provide precise location and orientation in 3D space. The milling of the object was divided in two parts, with the seating area milled in higher detail. Overall process of working with a residual wood that has potential to be both effective and present aesthetic quality based on individual characteristics of wood. Further development can integrate a generative tool which would streamline the design and fabrication proces further.
keywords	Robotic arm milling, Scanning, Residual wood
series	eCAADe
email
last changed	2024/11/17 22:05

_id	caadria2005_a_2c_a
id	caadria2005_a_2c_a
authors	Ivan Redi, Andrea Redi
year	2005
title	A.N.D.I. - A new Digital Instrument for networked creative collaboration in architecture and net.art
doi	https://doi.org/10.52842/conf.caadria.2005.209
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 209-215
summary	A.N.D.I. (A New Digital Instrument), an open source software project, has objective to develop a run-time environment with the focus on the applications for the networked international and cross-disciplinary production in the creative sphere of architecture, urban planning, design and net.art. It is a digital environment which opens the possibilities to generate advanced projects in a networked society. This new working tools will increase the creativity, productivity and competitiveness of the involved actors by drawing upon and developing technologies for virtual, augmented and mixed realities. A.N.D.I. has two basic aspects. On the one hand it is a database driven collaborative environment and on the other hand it will enable the development of future software and tools for networked creative collaboration.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	cf2005_1_67_72
id	cf2005_1_67_72
authors	JENG Taysheng
year	2005
title	Advanced Ubiquitous Media for Interactive Space
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 341-350
summary	Developing ubiquitous media for interactive space requires interdisciplinary collaboration in studying ubiquitous computing. This work generalizes the criteria in the many disciplines of ubiquitous computing into a conceptual framework, including interaction interfaces, sensing technologies, application control, and human adaptation. This work presents a novel system architecture based on such a framework, and a research prototype recently developed called IP++. Additionally, the design principles and the potential of IP++ are discussed.
keywords	ubiquitous media, interactive space, human-computer interaction
series	CAAD Futures
email
last changed	2006/11/07 07:27

For more results click below: