Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1860

Reformat results as: short short into frame detailed detailed into frame

_id	ddss2006-pb-101
id	DDSS2006-PB-101
authors	Aloys W.J. Borgers, I.M.E. Smeets, A.D.A.M. Kemperman, and H.J.P. Timmermans
year	2006
title	Simulation of Micro Pedestrian Behaviour in Shopping Streets
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 101-116
summary	Over the years, scholars have developed various models of pedestrian movement. These models can be used to assess the effects of detailed design decisions or to predict pedestrian behaviour under conditions of crowding. To date, not much attention has been paid to pedestrians' shopping behaviour at the micro level. Therefore, the main purpose of this project is to test a model that aims at simulating micro pedestrian behaviour in shopping streets, including entering shops. The model assumes a detailed network of links to represent the structure of street segments and entrances to the shops. The basic principle underlying the model is that a pedestrian moves from one link in the network to another, adjacent link. In fact, a pedestrian enters a segment at one side, heading for the other side of the segment. However, a pedestrian might enter the segment by leaving a shop as well. Then, the pedestrian might be heading for either side of the segment. While transferring from the current link to the next link, the pedestrian will be attracted by the shops along both sides of the street. The study area is Antwerp's main shopping street. During a one-week workshop in July 2004, students observed pedestrian movement in this shopping street. An inventory of some physical characteristics of the shopping street was made and pedestrians were tracked through two separate segments of the shopping street. In total, 334 pedestrians were tracked. A conventional multinomial logit model is used to simulate pedestrians' micro behaviour. The process of consecutively selecting links continues until the pedestrian has reached one of the terminal links or a shop. The model performs very well. Simulated routes were used to assess the validity of the model. Observed and simulated link loading correspond fairly well, however, the model seems to slightly mispredict the attraction of a number of shops.
keywords	Micro pedestrian behaviour, Shopping street, Simulation
series	DDSS
last changed	2006/08/29 12:55

_id	caadria2006_601
id	caadria2006_601
authors	BINSU CHIANG, MAO-LIN CHIU
year	2006
title	PRIVATE/UN-PRIVATE SPACE: Scenario-based Digital Design for Enhancing User Awareness
doi	https://doi.org/10.52842/conf.caadria.2006.x.s8b
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 601-603
summary	Context awareness is important for human senses of places as well as human computer interaction. The aim of this research paper is focusing on controlling the user's privacy in a smart space which is adaptive to different users for enhancing the user's awareness in his diary life. In Environmental Psychology, the definition of privacy is that an individual has the control of deciding what information of himself is released to others, and under how he interact with others. (Westin 1970) And privacy is categorized as the linguistic privacy and visual privacy. (Sundstorm 1986). Solutions for privacy control: Plan Layout, Vision Boundary, Access Control and Architecture Metaphor - the transmission of information is not ascertainable for every single user. Although information are shown in public, but information is implied by cues and symbols. Only a certain user or a group of users have access to the full context of information. The methodology is to form an analytic framework to study the relationship between information, user and activities by using the computational supports derived from KitchenSense, ConceptNet, Python, 3d Studio Max and Flash; and to record patterns built up by users' behaviour and actions. Furthermore, the scenario-based simulation can envision the real world conditions by adding interfaces for enhancing user awareness.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	2006_182
id	2006_182
authors	Bridges, Alan
year	2006
title	A Critical Review of Problem Based Learning in Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.2006.182
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 182-189
summary	There is limited research and discussion on pedagogical approaches in architectural education, simply because it is considered as one of the “unimportant” areas that researchers “do not bother studying” (Teymur, 2001). Problem Based Learning has been known to provide competent graduates in other professional disciplines, and, consequently, there have been attempts to utilise the same pedagogical approach in architectural education where PBL is seen as a potential solution to the problems encountered in architectural education. This paper critically reviews PBL implementations at TU Delft Netherlands and Newcastle University, N.S.W. Australia and draws conclusions with particular respect to the teaching of architectural computing
keywords	PBL; architecture; computing
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2006_770
id	2006_770
authors	Charbonneau, Nathalie; Dominic Boulerice; David W. Booth and Temy Tidafi
year	2006
title	Understanding Gothic Rose Windows with Computer-Aided Technologies
doi	https://doi.org/10.52842/conf.ecaade.2006.770
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 770-777
summary	This paper explains the parameters and methodology at the heart of an ongoing research project that seeks to verify whether one can trace back the genesis of any given artefact or work of art by means of computer-aided modeling. In its endeavour our research team Computer Assisted Design Research Group (GRCAO) aims to initiate and propose novel methods of modeling design processes. This approach is exemplified by a case study dealing with rose tracery designs adorning Gothic cathedrals of 12th and 13th Century Île-de-France. A computerized model reenacting their design process was developed along with an interface enabling the translation of the designer’s intentions into a virtual design space. The stated goal of this research project is to evaluate empirically to what extent our modeling strategies can grasp a given artefact as a logical and articulate ensemble. Furthermore, we seek eventually to determine whether this kind of software programme would prove an adequate tool in the development of the architectural designer’s cognitive abilities.
keywords	Architectural modeling; architectural know-how; Gothic rose windows; functional programming
series	eCAADe
email
last changed	2022/06/07 07:55

_id	8b29
id	8b29
authors	Chaszar, A. (ed.), Burry, M., Eliassen, T., Garofalo, D., Glymph, J., Hesselgren, L., Jonkhans, N., Kienzl, N., Kloft, H., Maher, A., Mueller, V., Palmer, A., Reuss, S., Schuler, M., Schwitter, C., Sharples, C., Sharples, W., Shea, K., Stoller, P., Takemori, T., Woodger, N.
year	2006
title	Blurring the Lines: Computer-Aided-Design and -Manufacturing in Architecture
source	Wiley-Academy, London 224 pp. Architecture in Practice series
summary	The first few years of the 21st century have seen a revolution in the ways that we think about designing and making buildings. In no other area is this more apparent than in the interface of computer-aided design (CAD) and computer-aided manufacture (CAM). The potential blurring or assimilation of these two systems holds the still elusive but golden promise of a direct, smooth transference of design data into large-scale production facilities in which components are directly cut, modelled and moulded. How far off are we from seeing the widespread adoption of this technology? What is the potential for CAD/CAM beyond tailor-made forms? In the future, what is the possibility of complex, large-scale forms being run out in mass-customised buildings?
keywords	associative geometry, auralization, CNC, collaborative design, generative design, parametric design, simulation, visualization
series	book
type	normal paper
email
last changed	2006/06/12 23:35

_id	caadria2006_597
id	caadria2006_597
authors	CHOR-KHENG LIM, CHING-SHUN TANG, WEI-YEN HSAO, JUNE-HAO HOU, YU-TUNG LIU
year	2006
title	NEW MEDIA IN DIGITAL DESIGN PROCESS: Towards a standardize procedure of CAD/CAM fabrication
doi	https://doi.org/10.52842/conf.caadria.2006.x.r4i
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 597-599
summary	In 1990, due to the traditional architecture design and construction method difficult to build the complicated and non-geometry free-form Fish Structure in Barcelona, architect Frank Gehry started learn from the field of aerospace to utilize CAD/CAM technology in design and manufacture process. He created the free-form fish model in CAD system and exported the digital CAD model data to CAM machine (RP and CNC) to fabricate the design components, and finally assembled on the site. Gehry pioneered in the new digital design process in using CAD/CAM technology or so-called digital fabrication. It becomes an important issue recently as the CAD/CAM technology progressively act as the new digital design media in architectural design and construction process (Ryder et al., 2002; Kolarevic, 2003). Furthermore, in the field of architecture professional, some commercial computer systems had been developed on purpose of standardizes the digital design process in using CAD/CAM fabrication such as Gehry Technologies formed by Gehry Partners; SmartGeometry Group in Europe and Objectile proposed by Bernard Cache. Researchers in the research field like Mark Burry, Larry Sass, Branko Kolarevic, Schodek and others are enthusiastic about the exploration of the role of CAD/CAM fabrication as new design media in design process (Burry, 2002; Schodek et al., 2005; Lee, 2005).
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2006_c017c
id	sigradi2006_c017c
authors	de la Barrera Poblete, Carlos Ignacio
year	2006
title	Algoritmos Evolutivos como Modelo Propositivo de Diseño [Evolutionary Algorithms for Supple Design Systems]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 273-277
summary	The study uses a repetitive rule of geometric and arithmetical expression, cradle in the movement of the horse in the chess, as displacement continued within a well-known field. Each jump is an iteration of the algorithm, and does that a gene initiator mute, varying its genetic information in its chromosome. This Evolutionary Algorithm is used like an explorer of the space, which tends to move according to a pre-established atmosphere in the programming. The Evolutionary Algorithm imitates the biological evolution as strategy to solve design problems. Its unexpected answers and without direct intervention of a designer, is a family of forms with small variations among them, where each member is a possible solution to the problem. The Generative Calculation depends on its rules, and in this sense he is as genuine as the behaviour of any natural biological system.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	5094
id	5094
authors	d’Estrée Sterk, Tristan
year	2006
title	Responsive Architecture: User-centered Interactions within the Hybridized Model of Control
source	Proceedings of the GAME, SET, MATCH II, conference at the Technical University of Delft, Netherlands, 29 March - 1 April 2006, pp. 494-501
summary	In the September 1969 issue of Architectural Design, Andrew Rabeneck wrote about the use of cybernetic devices within an automated architecture. He hypothesized that the concept of ‘flexibility’ was introduced to architecture because existing building technologies were inherently inflexible. He argued that architects should use cybernetic technologies to produce completely new types of increasingly flexible, user-centred, buildings. Three years later, Yona Friedman wrote about the changing relationship between clients and architects. He said that a new design methodology was needed because architects could not assess the future spatial needs of building users accurately enough. Proposing a new model, he split architectural design in two complementary halves, hardware design and software design, reasoning that this would give users the opportunity to adapt built spaces to suit their needs. Both of these ideas describe approaches to the production of an architecture that can change shape and configuration in response to changing patterns of use. Rabeneck’s approach illustrates the benefit of predictive technologies and automation, while Friedman’s model illustrates the benefit of user intervention and direct manipulation. This paper discusses developments in the field of responsive architecture in relation to two opposing user-centred interaction methodologies. It proposes methods for controlling responsive buildings and suggests that human computer interaction methodologies need to be re-thought and extended when applied within intelligent, responsive, architectures.
keywords	Responsive architecture, User-centred design, HCI, Intelligent buildings
series	other
type	normal paper
email
more	admin
last changed	2017/04/10 13:08

_id	ddss2006-hb-251
id	DDSS2006-HB-251
authors	E.W.T.M. Heurkens
year	2006
title	Decision-Making on Olympic Urban Development - A multi-actor decision support tool
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 251-262
summary	Subject of study is the possible organisation of the Olympic Games of 2028 in the Netherlands, as seen from an urban development viewpoint. The project focuses on the decision-making process in the initiative phase. Aim of the project is the development of a decision support tool for the complex, interdisciplinary decision-making process which should result in an optimum interorganisational design. The methodology used to find the optimum choice is the combination of sub-solutions. Preference Measurement modelling based on a multi-criteria decision analysis is the technique employed. The group decision is a choice out of a number of Olympic urban development combinations, which is made in such a way that the preferred combination is the 'best' among the possible candidates for all relevant stakeholders.
keywords	Combination of sub-solutions, Group decision-making, Olympic urban development, Optimum interorganisational design, Preference measurement modelling
series	DDSS
last changed	2006/08/29 12:55

_id	caadria2015_246
id	caadria2015_246
authors	Fok, Wendy W.
year	2015
title	Delineating Crowd Sourced Ownership in the Digital Age for the Built Environment
doi	https://doi.org/10.52842/conf.caadria.2015.043
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 43-52
summary	Time Magazine, had named the “Person of the Year” to “YOU” (the crowd) in 2006 , due to the infinite potentials of the thousands and millions of ‘yous’ who control the media and financing within the new digital democracy. These same citizens of digital innovation create the new platforms—seen in the early beta developments of Kickstarter, Twitter, Wikipedia, and Facebook—and contribute to the manipulation of international exchange of information and power, creating value propositions beyond the traditional product complexity of the market. Peer exchange and crowd organizational strategy will be used to innovate the built environment, and it is pertinent for “digital” property and “real” property to recognize and benefit from this emergence. Professional codes of conduct, economic values, and legal regulations have become a means to an end of the designing of digital and physical property, as digital barriers lift much of the necessary pre-cautions that is required to govern collaboration. This body of research explores the qualifying factors of open innovation identity between the creators and the consumers, the state of design ethics and ownership uncertainties pertaining to the combinatory methods and mechanisms that employ these technologies.
keywords	Open Innovation; Crowd source; Authorship; Ownership; Digital Media; Digital Property; Physical Property.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	81f0
id	81f0
authors	Hall, Theodore W
year	2006
title	Artificial Gravity Visualization, Empathy, and Design
source	AIAA 2006-7321. 2nd International Space Architecture Symposium, AIAA Space 2006 Conference & Exposition, San Jose, California, USA, 19-21 September 2006. Reston, Virginia, USA: American Institute of Aeronautics and Astronautics.
keywords	scientific visualization
series	other
type	normal paper
email
more	http://www.spacearchitect.org/pubs/AIAA-2006-7321.pdf
last changed	2006/10/10 05:15

_id	acadia06_270
id	acadia06_270
authors	He, Weiling
year	2006
title	“Flatness” through Camera The Implications of Camera Movement in the Digital Reconstruction of Diamond Museum
doi	https://doi.org/10.52842/conf.acadia.2006.270
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 270-277
summary	In architectural design, explorations using digital modeling and rendering tools do not stop at producing 3D geometries and representations. We need to interrogate the spatial implications of the functions these tools provide. One of the questions we need to ask is, is it possible to foreground architectural concepts “within” the mechanisms of these tools? This study focuses on one single function in 3D VIZ camera movement. The objective is to examine the spatial implications of this function in the computerized architectural space of Diamond Museum. Camera movement is studied in six variables: distance, point of view, camera angle, framing, duration and travel speed and sequencing. Further, the architectural concept of flatness will be understood through the movies generated within the space of Diamond Museum.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	sigradi2006_c067d
id	sigradi2006_c067d
authors	Hernández Ibáñez, Luis; Juan D. Blanco; José A. Iglesias; Javier Taibo; Antonio Seoane; Alberto Jaspe and Rocío López
year	2006
title	El Museo Vacío. Uso de una instalación transitable de Realidad Virtual para la experimentación espacial de una unidad habitacional en un asentamiento prerromano. [“The Empty Museum” - Use of an immersive VR room to experience the space inside a pre-Roman housing unit]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 363-367
summary	This paper describes the use of a existing Virtual Reality installation developed by the authors named the Empty Museum that allows the users to walk physically into a virtual space. It is used in this case to explore a bronze age housing unit actually being excavated in the settlement of San Cibran de Las (Spain). The project involved a recreation of the architecture, domestic objects and characters related to the ancient Castro culture following an archaeological and historical point of view. The visitor explores the place by walking inside the kitchen of the house, examining several points of interest while triggering explanatory speeches related to what is displayed. The user can also watch the living in the settlement looking through the openings of the virtual building and interact with the virtual inhabitants of the house as he or she physically walks around them.
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	caadria2006_461
id	caadria2006_461
authors	JIN YEU TSOU, JIE HE, YUCAI XUE
year	2006
title	REMOTE SENSING APPLICATIONS IN MULTIDISCIPLINARY URBAN PLANNING: A Case Study of Qualitative and Quantitative Approaches
doi	https://doi.org/10.52842/conf.caadria.2006.x.r0w
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 461-470
summary	This paper introduces a methodology of integrating remote sensing environmental investigations in urban greenery and urban heat island effect. It provides scientific planning supporting information through both qualitative and quantitative approaches. A case study demonstrates the implementation in a multidiscipline planning practice.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2006_000
id	caadria2006_000
authors	Kaga, Atsuko; Naka, Ryusuhe (eds.)
year	2006
title	CAADRIA '06
doi	https://doi.org/10.52842/conf.caadria.2006
source	Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia (ISBN 4-907662-01-7 / Kumamoto, Japan) March 30th - April 2nd 2006, 649 p.
summary	It is apparent that recent development of digital technology has shifted the paradigm of the socio-economic system of the world as well as the style of day-to-day communication in our lives, as professor Mitchell suggested in his book. In the field of architecture, there have been many prospective studies on the development and applications of digital technology to architectural design practice and education. However, the reactions of the architecture community to such technological development have been slower and weaker than researchers initially expected. Is this because developed technology has overlooked some of essential needs of the community while seeking tasks for itself or because present technology is still insufficiently developed to attract people to new ideas? One of Japan's great samurai sword masters, Musashi Miyamoto, spent the last years of his life in Kumamoto where he wrote The Book of Five Rings. The most important element of his work was his concept of rhythm and harmony; how all things are in harmony, and how by working with the rhythm of a situation we can turn it to our advantage with little effort. The conference aims to provide the participants with an opportunity to explore visions and ideas on the digital technology that could enhance Rhythm and Harmony in architectural design practice and education.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	eaea2005_39
id	eaea2005_39
authors	Kardos, Peter
year	2006
title	The visual context of architectural and urban design processes
source	Motion, E-Motion and Urban Space [Proceedings of the 7th European Architectural Endoscopy Association Conference / ISBN-10: 3-00-019070-8 - ISBN-13: 978-3-00-019070-4], pp. 39-47
summary	When designing, an architect in his imagination generates images, topics and drafts in various combinations. He is supported by his imagination, experience, know - how and ideological creative intentions. He is driven by the need to externally transmit, illustrate or explain his visualizations. The basis of the external communication is on one side the figurative interpretation of spatial manifestation of the conceptual suggestion and on the other hand the vision, perception or experience of the given solution projection by eyes of participants to the visual presentation. The above-mentioned process of verification or consensual examination is a principal requirement for creative progressing in finding solutions to an architectural problem. In the process of architectural education this phenomenon in studio conditions becomes a platform for students to gather professional experience in practical application of theoretical knowledge and in iterative verification of predication value quality of architectural or urbanistic proposal itself.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	2006_052
id	2006_052
authors	Kieferle, Joachim; Uwe Wössner and Martin Becker
year	2006
title	Interactive Simulation of Architecture in Virtual Environments
doi	https://doi.org/10.52842/conf.ecaade.2006.052
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 52-57
summary	Architecture always has an environmental impact. By using simulations, planners can minimize the environmental impact. Since simulations normally take a long time and thus only allow a very limited number of iterations, our project describes the setup of a close-to-real-time simulation technique. By dividing the simulation into smaller parts and running the software on clusters or massively parallel computing platforms, first results are available within several seconds, reasonable results below one minute. In order to make this tool easily accessible to specialists and laymen, a tangible user interface provides an intuitive interaction method. The results of the simulation can be visualized and interacted with in different virtual environments. Limitations, mainly automatic grid generation, shape recognition and computation power are discussed.
keywords	Interactive Simulation; Tangible User Interface; Virtual Environment; Virtual Reality
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ijac20053406
id	ijac20053406
authors	Kvan, Thomas
year	2005
title	Professor Tsuyoshi Sasada 1941-2005
source	International Journal of Architectural Computing vol. 3 - no. 4, 519-526
summary	Tsuyoshi Sasada, known as Tee to so many of us, died on 30 September 2005 at the age of 64 after a long illness.Tee retired from Osaka University in 2004 upon reaching the mandatory retirement age but retained his association as Emeritus Professor.At the time of his death he held appointments as Honorary Professor, National Chiao Tung University (Taiwan) and Expert Researcher, National Institute of Information and Communications Technology. He had been with Osaka University since 1970, having earned his bachelor, master and doctoral degrees at Kyoto University. In 1988 he was appointed Professor in Osaka and established his laboratory, known as the Sasada Lab, from which over 200 students have graduated.
series	journal
email
more	http://www.ingentaconnect.com/content/mscp/ijac/2006/00000004/00000001/art00002
last changed	2007/03/04 07:08

_id	caadria2006_443
id	caadria2006_443
authors	M.W. KNIGHT, A.G.P. BROWN, J.S. SMITH
year	2006
title	DIGITAL TERRAIN MESHES FROM GPS IN URBAN AREAS: A Practical Aid to City Modelling
doi	https://doi.org/10.52842/conf.caadria.2006.x.a6t
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 443-451
summary	The work presented here brings together two core interests that have been developed by the first two authors over recent years. The first is the development of city models for use in a range of applications where different data sets and different levels of detail may be appropriate. The second is the development of low cost systems that can deliver useful tools to help address Computer Aided Architectural Design problems. In addition the involvement of a colleague in Electrical Engineering and Electronics reflects a long standing belief in the benefits of cross-disciplinary and interdisciplinary work between architecture and parallel research fields. The product of the collaboration is a system that can aid in the production of terrain models that, in our case, are particularly important as the base for a city model (Brown et.al, 2005).
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ddss2006-pb-185
id	DDSS2006-PB-185
authors	O.T.J. Devisch, H.J.P. Timmermans, T.A. Arentze, and A.W.J. Borgers
year	2006
title	Modelling Residential Search and Location Choice - Framework and Numerical Experiments
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 185-200
summary	People only move a limited number of times during their lifetime. Factors such as high financial costs, local social networks, emotional bounds, etc. make that people typically postpone this decision as long as possible, up to the point where the benefit of alternative housing outperforms all these factors. Then things generally have to go fast. This combination of time-pressure, high costs and lack in experience turn residential search and location choice into a complex decision process. This paper presents a model developed to grasp some of this complexity. Households are approached as autonomous decision-makers continuously evaluating whether to search for information, to visit houses for inspection, to start negotiating with the owner of a house for sale or to do nothing and stay in the current house. Households make these evaluations on the basis of beliefs regarding their environment and update these beliefs each time they collect new information on this environment.
keywords	Microsimulation, Spatial simulation models, Strategic decision-making, State dependent behaviour, Belief-updating
series	DDSS
last changed	2006/08/29 12:55

For more results click below: