Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2084

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2006_e165b
id	sigradi2006_e165b
authors	Angulo, Antonieta
year	2006
title	Optimization in the Balance between the Production Effort of E-learning Tutorials and their related Learning Outcome
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 122-126
summary	This paper provides evidence on the level of media richness that may be cost effective in the development of e-learning tutorials for teaching and learning computer visualization techniques. For such a purpose the author provides an analysis of low-cost / high-impact media rich products, the effort and cost required in their development and the measurement of related learning outcomes. Circa twenty years of R&D of multimedia and hypermedia applications for instruction have demonstrated the benefits of communicating relevant information to learners using engaging media. Based on this evidence, this paper assumes that due to the cognitive style of design students, the instructional packages for learning computer techniques for design visualization that are rich in media content, tend to be more effective. Available visualization technologies make the development of e-learning tutorials feasible and apparently the logical way to implement our instructional packages. However the question in the development of e-learning tutorials becomes a more strategic one when we are called to reach a level of optimization between producing a package with a basic standard, namely; text & still-graphic based tutorials, or a state-of-the-art package that is based on video demonstrations (more than enough?) that can accommodate the students’ learning requirements and also our production costs. The costs include the human resources (instructor, producers, assistants and others) and the material resources (hardware and software, copies, and others) involved in the creation of the e-learning tutorials. The key question is: What is good enough, and what is clearly superfluous? In order to confirm our hypothesis and propose a relevant balance between media richness and learning effectiveness, this paper describes an experiment in the use of two different levels of media richness as used to deliver instructions on the production of computer animations for design visualization. The students recruited for this experiment were fairly familiarized with the use of 3D modeling concepts and software, but had no previous knowledge of the techniques included in the tutorials; in specific; camera animation procedures. The students, separated in two groups, used one of the two methods; then they proceeded to apply their newly acquired skills in the production of an animation without using the help of any external means. The assessment of results was based on the quality of the final product and the students’ performance in the recall of the production procedures. Finally an interview with the students was conducted on their perception of what was accomplished from a metacognitive point of view. The results were processed in order to establish comparisons between the different levels of achievement and the students’ metacognitive assessment of learning. These results have helped us to create a clear set of recommendations for the production of e-learning tutorials and their conditions for implementation. The most beneficial characteristics of the two tested methods in relation to type of information, choice of media, method of information delivery, flexibility of production/editorial tools,! and overall cost of production, will be transferred into the development of a more refined product to be tested at larger scale.
keywords	e-learning tutorials; media richness; learning effectiveness; cognitive style; computer visualization techniques
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia06_104
id	acadia06_104
authors	Barrow, Larry R.
year	2006
title	Performance House: A CADCAM Modular House System
doi	https://doi.org/10.52842/conf.acadia.2006.104
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 104-121
summary	Millions of persons around the globe live in low quality indigenous, or Manufactured Housing (MH) systems that often result in low “performance” undesirable living environments and, at times, life threatening habitation. Our research has explored mass production principles in product design and architecture, currently at the single family housing scale, with a focus on the recent devastation along the US Gulf Coast as a result of hurricane impact, most notably hurricane Katrina.“Modern architecture” theoreticians have conceived, written, prototyped and even launched business ventures in an attempt to bring their manufactured housing “ideas” to fruition. However, architects have generally had little “long-term” impact in the area of manufactured housing strategies and the current manufactured housing industry remains archaic and problematic. This paper includes our research of other architects attempts to leverage technology in the manufactured housing industry; additionally, we analyzed current problems in the US mass housing industry. We then derived a set of “design criterion” as a means of anchoring our design inquiry for a proposed factory-built modular house system.Our research encompasses both process and product innovation; this paper reflects on our use of technology to leverage an Industrial Design (ID) process that is inclusive of many “design” partners and team members. We are using both virtual and physical output representation and physical prototyping for a factory-built house system; our Research and Development (R&D) is on-going with our collaborating design-manufacture engineering partners from the automotive, furniture and aerospace research labs here at Mississippi State University. Our goal is to use “industrial design” principles to produce mass housing components that provide durable-sustainable housing.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia06_158
id	acadia06_158
authors	Barrow, Larry R.
year	2006
title	Digital Design and Making 30 Years After
doi	https://doi.org/10.52842/conf.acadia.2006.158
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 158-177
summary	Current design studio pedagogy is undergoing significant change as the means and methods of ideation, representation and making evolve with digital tools; Computer-Aided-Design-Computer-Aided-Manufacturing (CADCAM) remains a contentious topic among many studio instructors and faculty in the academy. Computing is now nearing ubiquity; many processes and products have seen significant evolutionary trends, if not revolutionary transformations; this is no less the case in the academic and firm design studio. The impact of “digital” media and CADCAM, in the design-make process, remains obscure and formally unknown.In this paper, we will review our research and findings from the work of three students; two current students who were in our Digital Design II (DDII) spring 2006 course and the third student, the writer, will reflect on “design and making” from a “pre-architecture” and pre-studio/pre-computer (CADCAM) perspective of ‘making’ thirty-three years ago. The research findings provide universal precepts pertinent to current thinking about emerging studio pedagogy. Our findings suggest that computing technology should be introduced at the outset of design education for the beginning student in basic design studio; and moreover, advanced designers can partner with “digital” tools to ideate and realize their, heretofore unrepresentable and unconstructable, ideas in the early stages of design using CADCAM.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia06_426
id	acadia06_426
authors	Garber, R., Robertson, N.
year	2006
title	The Pleated Cape: From the Mass-Standardization of Levittown to Mass Customization Today
doi	https://doi.org/10.52842/conf.acadia.2006.426
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 426-439
summary	In the 1950’s, the Levitts put mass-production and the reverse assembly line into use in the building of thousands of single-family houses. However, the lack of variation that made their construction process so successful ultimately produced a mundane suburban landscape of sameness. While there were many attempts to differentiate these Levitt Cape Cods, none matched the ingenuity of their original construction process. The notion of mass-customization has been heavily theorized since the 1990’s, first appearing in the field of management and ultimately finding its way into the field of architecture. Greg Lynn used mass-customization in his design for the Embryological House in which thousands of unique houses could be generated using biological rules of differentiation (Lynn 1999). Other industries have embraced the premise that computer-numerically-controlled technologies allow for the production of variation, though it has not been thoroughly studied in architecture. While digital fabrication has been integral in the realization of several high-profile projects, the notion of large-scale mass-customization in the spec-housing market has yet to become a reality. Through the execution of an addition to a Cape Cod-style house, we examine the intersection between prefabricated standardized panels and digital fabrication to produce a mass-customized approach to housing design. Through illustrations and a detailed description of our design process, we will show how digital fabrication technologies allow for customization of mass produced products.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	sigradi2007_af13
id	sigradi2007_af13
authors	Granero, Adriana Edith; Alicia Barrón; María Teresa Urruti
year	2007
title	Transformations in the educational system, Influence of the Digital Graph [Transformaciones en el sistema educacional, influencia de la Gráfica Digital]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 182-186
summary	The educative proposal was based on the summary attained through experiences piled up during the 2 last semester courses, 2/2006-1/2007. This proposal corresponds to a mix of methodology (by personal attendance / by internet). Founding on the Theory of the Game (Eric Berne 1960) and on different theories such as: Multiple intelligences (Haward Gardner 1983), Emotional Intelligence (Peter Salowey and John Mayer 1990, Goleman 1998), Social Intelligence (Goleman 2006), the Triarchy of Intelligence (Stemberg, R.J. 1985, 1997), “the hand of the human power”, it´s established that the power of the voice, that of the imagination, the reward, the commitment and association produce a significant increase of the productivity (Rosabeth Moss Kanter 2000), aside from the constructive processes of the knowledge (new pedagogical concepts constructivista of Ormrod J.E. 2003 and Tim O´Reilly 2004).
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ddss2006-hb-85
id	DDSS2006-HB-85
authors	J.A.M. Borsboom-van Beurden, R.J.A. van Lammeren, T. Hoogerwerf, and A.A. Bouwman
year	2006
title	Linking Land Use Modelling and 3D Visualisation - A mission impossible?
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 85-101
summary	Additional to the traditional land use maps 3D visualisation could provide valuable information for applications in the field of spatial planning, related to ecological and agricultural policy issues. Maps of future land use do not always reveal the appearance of the physical environment (the perceived landscape) as a result of land use changes. This means that 3D visualisations might shed light on other aspects of changed land use, such as expected differences in height or densities of new volume objects, or the compatibility of these changes with particular characteristics of the landscape or urban built environment. The Land Use Scanner model was applied for the Netherlands Environmental Assessment Agency's 'Sustainability Outlook' to explore land use changes, followed by GIS analyses to asses both the development of nature areas and the degree of urbanisation within protected national landscapes. Since it was felt that 3D visualisation could complement the resulting land use maps, the land use model output was coupled to 3D visualisation software in two different ways: 1) through Studio Max software in combination with iconic representation of the concerned land use types and 2) through 3D components of GIS software. However, the use of these techniques on a national scale level for the generation of semi-realistic 3D animations raised a number of conceptual and technical problems. These could be partly ascribed to the particular format and of the Land Use Scanner output. This paper discusses the methods and techniques which have been used to couple the output of the land use model to 3D software, the results of both approaches, and possible solutions for these problems.
keywords	Land use models, 3D visualisation, Policy-making
series	DDSS
last changed	2006/08/29 12:55

_id	caadria2006_405
id	caadria2006_405
authors	JOSE R. KOS, JOSE BARKI
year	2006
title	VISUALIZING ARCHITECTURAL THEORY: A CASE-STUDY ON DIGITAL REPRESENTATION
doi	https://doi.org/10.52842/conf.caadria.2006.x.k5m
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 405-411
summary	This paper aims to analyze interactive multimedia and visualization techniques for architectural theory publications. Unfortunately, the available literature about multimedia, visualization, hypertext and related systems in this area is not consistent. The paper reviews the features of a research project outcome, which investigates an iconic building of the late 1930’s in Brazil. It examines the differences and similarities between a hypertext/multimedia system – a CD-ROM – with a comparable non-hypertext or non-computer product – a book – that deals with a specific subject: Architectural Theory.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2006_081
id	caadria2006_081
authors	JÖRG RÜGEMER
year	2006
title	WEB BASED DESIGN AND COMMUNICATION PEDAGOGY : Group pedagogy and the implementation of web-based technologies within the design process
doi	https://doi.org/10.52842/conf.caadria.2006.x.p2s
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 81-90
summary	The success of the international Zollhof project in Düsseldorf, Germany, in which virtual communication played a crucial role, was the catalyst for introducing interdisciplinary digital methods in the field of teaching. The firm of Frank O. Gehry and Associates, Santa Monica, California, served as an initial field of experimentation in order to bring together a heterogeneous group of project partners to participate in the design and construction phases of the Zollhof project. The design development, construction document, and construction phase was considerably enhanced by the employment of digital media as a communication and information tool. Parallel to the design process in the office in Santa Monica, a line of information flow and management had to be established to connect the local design team with consultants that were located in Europe and specifically in Germany. This line of communication required the team to send precise descriptions of project steps to the participants abroad, as well as receiving and processing a flow of responses returning to the Santa Monica office in very short intervals. By advancing and documenting each design and development step, the project progression was clearly documented by the project teams and thus understandable to everybody involved. The process demanded a highly articulated project description in text and images that were refined and exchanged daily. This helped to strengthen the cooperation between the design team and the project consultants and started to dissolve the role of the prime architect or designer toward a more team-related and democratic structure. All participants had quick access to all necessary information, which set aside the vertical hierarchy in favor of transparent communication tools and platforms.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ijac20064306
id	ijac20064306
authors	Klinger, Kevin R.; Vermillion, Joshua
year	2006
title	Visualizing the Operative and Analytic: Representing the Digital Fabrication Feedback Loop and Managing the Digital Exchange
source	International Journal of Architectural Computing vol. 4 - no. 3, 79-97
summary	Digital architecture is process-based and reliant upon a conversation between digital visualization, analysis, and production. With the complexity of information generated in process-based digital practices, we need to effectively manage and exchange the information. Feedback loops are integral to this process/product, and thus require extensive management of complex versions of visual and data related information. Quite a lot of scholarly attention has been focused upon highlighting innovative projects using digital fabrication and serial customization. However, there is a scarcity of scholarly work about innovations in visualizing and representing the design data integral in this feedback loop. This paper will examine innovative representational devices such as the matrix, sectioning, layering, bracketing, nesting, and other new forms of organizing, visualizing, analyzing, and simulating complex data, intent upon communicating multiple levels of operations during the design and fabrication process. With a rigorous taxonomy of operative and analytic devices for process-based digital design development, we can begin to outline a trajectory for future evolutions in practice. This writing is an attempt to make a few steps in this direction, and demonstrate some of these new representational ideas in practice.
series	journal
last changed	2007/03/04 07:08

_id	acadia06_317
id	acadia06_317
authors	Lee, E. S., Hong, S., Johnson, Brian R.
year	2006
title	Context Aware Paper-Based Review Instrument A Tangible User Interface for Architecture Design Review
doi	https://doi.org/10.52842/conf.acadia.2006.317
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 317-327
summary	We describe the design and implementation of a prototype computer-supported collaborative work (CSCW) environment for review of architectural construction documents. This environment utilizes a novel plain-paper tangible interface that supports shared activity such as review of construction documents using an “over the shoulder” computational assistant called CAPRI.Despite the increasing use of computers, work in most architecture firms still largely revolves around paper drawings. Architects structure their work around paper instead of digital representations for reasons of legal liability and tradition, as well as technical limitations. While hardcopy is intuitive, dense, and easy to access, it lacks direct connection to the wide range of design knowledge increasingly available in interactive design environments. This lack is felt most acutely during design review processes, when the designer or reviewer is often called upon to consult and consider holistically a variety of supporting (backing) documents, a task which requires focused attention and a good memory, if errors are to be avoided.Our prototype system enables multiple reviewers to interact equally with a paper construction document using a tangible interface to query detail and backing data from a project knowledge base. We believe this will decrease the reviewer’s cognitive load by bringing design data to them in a contextual and timely way. In doing so, we believe errors will be caught sooner and mistakes reduced.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	ijac20064206
id	ijac20064206
authors	MacBain, Keith; Spillers, William R.
year	2006
title	A Tool for the design of Fabric Structures
source	International Journal of Architectural Computing vol. 4 - no. 2, 81-94
summary	This paper describes the development of a tool, now available for use over the Internet, for the preliminary design of a class of fabric structures. This tool is based on the so-called grid method in which vertical equilibrium over a grid in the horizontal plane is used to determine shape for a cable net. It can subsequently be combined with other analysis routines to produce a detailed structural design.
series	journal
last changed	2007/03/04 07:08

_id	sigradi2006_p003c
id	sigradi2006_p003c
authors	Nojimoto, Cynthia; Pereira Carneiro, Gabriela and Tramontano, Marcelo
year	2006
title	Processos de design: uso de animações na concepção de peças de mobiliário [Design processes: Using computing animations for interactive furniture conception]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 321-324
summary	This article explores the use of graphical animations in the process of furniture design. The proposals are part of the Kómuniká’tór Project (www.eesc.usp.br/nomads/ kom.htm) that investigates the insertion of media in dwelling furniture. The objective is to describe the process of creation and use of these animations pointing how this methodology has been relevant for visualizing potentials and limitations of the proposals explored in the project. Two consultations through focus groups had been carried through, the first one with potentially users and the second one with professionals of design, communication and architecture domains. The technique of animations appears as a valid method for a first contact between the proposed object with its possible user.
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	caadria2006_521
id	caadria2006_521
authors	O. PALMON, M. SAHAR, L.P.WIESS, R.OXMAN
year	2006
title	VIRTUAL ENVIRONMENTS FOR THE EVALUATION OF HUMAN PERFORMANCE: Towards Virtual Occupancy Evaluation in Designed Environments (VOE)
doi	https://doi.org/10.52842/conf.caadria.2006.x.j9t
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 521-528
summary	Analyzing and evaluating designs for modifications to suit the requirements of human performance is typically performed only after the architectural spaces and structures have been built and used, a process that is known as retrofit or post-occupancy evaluation. For people with disabilities, there is a special need to overcome this problem by evaluating the suitability of their home environments before the construction phase. Our work introduces a new methodology in which virtual reality (VR) is used for virtual pre-occupancy environmental evaluation (VOE). Our study demonstrates the potential of the VOE concept by developing an interactive living environments model to evaluate human performance before the construction phase. This paper presents an interactive virtual environment, ‘HabiTest’, as well as the initial results of a usability evaluation of this interactive environment.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	acadia06_471
id	acadia06_471
authors	Perez, Santiago R.
year	2006
title	PolyForm: Biomimetic Surfaces
doi	https://doi.org/10.52842/conf.acadia.2006.471
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 471-482
summary	The evolution of the architectural surface from a static, fixed geometric assemblage to a responsive, biomimetic aggregate surface will be the topic of this paper. The work exhibited has been developed by the author and his students over the last two years, prompted by an interest in robotics, advanced material assemblies, and biomimetics. The work ranges in scope from digital models and simulations to working prototypes and full-scale habitable constructions. One aspect that serves to unite the emerging body of work may be summarized in the prefix “poly” denoting many, or having more than one state or form. Thus the word Polyform begins to suggest the interplay between biomimesis and adaptive surfaces. A similar term is found in the combination of poly and morph:
series	ACADIA
email
last changed	2022/06/07 08:00

_id	ddss2006-pb-253
id	DDSS2006-PB-253
authors	R. Di Giulio, M. Coccagna, and G. Tonelli
year	2006
title	IT Tools for the Valorisation of the Building Heritage - Analysis and reuse of rural buildings to improve cultural-tourism activities
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 253-268
summary	According to the valorisation of sustainable policies, many European countries developed common or individual strategies to preserve and exploit their environmental and building heritage. Through the VILLAS transnational project it has been possible to create a set of specific tools, focused on different user types and needs that are easy to be combined and applied to assess and valorise private and public building heritage.
keywords	Design support tools, Geographical information systems (GIS), Multi-criteria & decision mapping, Networks for decision-making
series	DDSS
last changed	2006/08/29 12:55

_id	caadria2006_063
id	caadria2006_063
authors	R. HOMMA, M. MOROZUMI, K. IKI, Y. DEGUCHI
year	2006
title	MAP-BASED BULLETIN BOARD SYSTEM FOR THE ARCHITECTURAL DESIGN STUDIO
doi	https://doi.org/10.52842/conf.caadria.2006.x.t1v
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 63-69
summary	This paper discusses the development of a Web-based mapping system (MapBBS) to support the discussion of field surveys in an architectural design studio. It supports a hierarchical discussion of student groups according to the scale of the map.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	caadria2006_645
id	caadria2006_645
authors	R. ISE, R. HOMMA, K. IKI
year	2006
title	DEVELOPMENT OF THE KNOWLEDGE-SHARING SHEET SYSTEM FOR COLLABORATIVE CITY MASTER PLANNING
doi	https://doi.org/10.52842/conf.caadria.2006.x.b0i
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 645-647
summary	In recent years, citizen participation has begun to progress in administration plan development. However, preparations for argument are not enough so that the citizen who is non-expert participates to administration plan development. In addition, arguments among experts are not understandable to citizens. In sum, experts cannot explain to citizens plainly. They often show only a result and a conclusion of their argument. Therefore the result of their argument cannot obtain sympathy of citizens. As a result the effectiveness of the administration plan has been deteriorated. For citizen participation, it is necessary to represent the process of an argument by arranging the information and ranking them for an argument. The purpose of this research is to adopt the knowledge management in planning a city master plan and to develop the systematic tool for the consensus decision-making in planning a city master plan. This tool supports a resident group for making a city master plan.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	caadria2006_037
id	caadria2006_037
authors	R. OXMAN
year	2006
title	DIGITAL DESIGN THINKING: IN THE NEW DESIGN IS THE NEW PEDAGOGY
doi	https://doi.org/10.52842/conf.caadria.2006.x.g3r
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 37-46
summary	Theories and methods of digital design can no longer be conceptualized as the merging of computational tools with conventional formulations of design. A new orientation to understanding the impact of digital media on “digital design thinking” and pedagogy is presented discussed and demonstrated.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	caadria2006_495
id	caadria2006_495
authors	R. SATO, W. YEO, A. KAGA, M. OYAMA
year	2006
title	NEW METHODS FOR URBAN DESIGN AND ARCHITECTURE USING THE VR TECHNIQUE AND ANALYSIS OF THE PSYCHOLOGICAL INFLUENCE
doi	https://doi.org/10.52842/conf.caadria.2006.x.p0n
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 495-501
summary	Urban plan and architecture require the use of VR systems. We adapted the buildings into a VR system, and then performed a virtual realization in the world’s largest dome at Matsushita Electric Works, Ltd. Walking or flying through life-size space was enabled. We viewed the planned future scenes that featured real size, space composition, and a simulated environment. The construction, the materials and colors of the building were examined. In addition, VR system on PC was applied to city planning and architectural design and a number of novel functions were added to the VR system by plug-in, which assisted and facilitated the design process. The stereoscopic thinking mode in 3-D space can inspire and comprehend more directly the ideas of design, and confirm the intended effects. We accordingly carried out a further study on users operating the VR system to investigate their responses of “like” or “dislike” towards the real time adjustments of design effect at identical viewpoints. Fractals analysis was conducted to demonstrate physically the influence of real time 3-dimentional design and presentation on the psychological trends of subjective judgment. Our findings pave the way for future research on monitoring psychological impacts on observers of VR system during design process.
series	CAADRIA
email
last changed	2022/06/07 07:49

For more results click below: