Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 17601

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2013_77
id	sigradi2013_77
authors	Banda, Pablo S.; Arturo Lyon Gottlieb
year	2013
title	Agregados Inflables y Patrones Emergentes: Logro de Patrones de Orden Superior mediante Compresión Axial [Inflatable Aggregates and Emergent Patterns: Higher-Order Patterns Achievement through Axial Compression]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 239 - 243
summary	This paper presents a Generative Design exploration of a simulated Inflatable Components Aggregate (ACN) ruled by local configurations and mechanical behavior, tested in a digital environment. The Design Product is revealed through compressions and deformations evaluation, where the ACN internal interaction’s exhibits emerging global patterns.
keywords	Generative design, Form Finding, Simulation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2021_280
id	sigradi2021_280
authors	Banda, Pablo, García-Alvarado, Rodrigo and Munoz-Sanguinetti, Claudia
year	2021
title	Architectural Digital Design for 3D Printing Housing: Search for 3D Printing in Construction Trends for a Design Methodology
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 1409–1421
summary	This paper proposes the development of a methodology for the digital generation of valid 3D-printed houses designs and fabrication programming, in the search for an emerging architectural language of this technology. The aim is to develop a transparent, generic and variable modeling and management process, based on some parametric patterns for 3D printing, architectural and construction design knowledge. That serves as an outline or insight of what can be designing architectural 3d-printed forms in the Construction 4.0 era. Preliminary results, discussion and further work are presented.
keywords	3D Printed Buildings, Generative Design, Parametric Design, Digital Fabrication, Housing
series	SIGraDi
email
last changed	2022/05/23 12:11

_id	sigradi2010_272
id	sigradi2010_272
authors	Banda, Pablo
year	2010
title	Absorbente de panal de abejas: explorando la adición de performance en sistemas de modelado paramétrico [Absorbing honeycomb: exploring performance addition in parametric modeling systems]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 272-275
summary	This paper analyzes the characteristics of the development of generative systems, originated by embedding knowledge of sound absorption within a parametric design system and implementing Helmholtz Resonators for the decrement of low frequencies of sound. The encounter between physically - related knowledge and explicit geometric processes is observed by focusing on contemporary author skills and design postures to outline methodological traces for a performance - based approach to parametric design.
keywords	parametric modeling, performance - based design, digital fabrication, scripting, custom tools
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2022_59
id	caadria2022_59
authors	Banihashemi, Farzan, Reitberger, Roland and Lang, Werner
year	2022
title	Investigating Urban Heat Island and Vegetation Effects Under the Influence of Climate Change in Early Design Stages
doi	https://doi.org/10.52842/conf.caadria.2022.2.679
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 679-688
summary	Different criteria need to be considered for optimal strategies in the early design stages of urban developments. Under the influence of climate change, the urban heat island effect (UHI) is a phenomenon that gains importance in the early design stages. Here, different parameters, for instance, vegetation ratio in the city district and building density, play a significant role in the UHI effect. These parameters need to be quantified through different simulation tools for optimal climate adaptation and mitigation measures on the urban district scale. However, not all parameters and their influence are clear to the decision-makers and actors in the early design stages. Hence, we propose a Monte Carlo based sensitivity analysis (SA) and uncertainty analysis (UA) to show the significance of different parameters and quantify them. The SA aims to identify the major influencing parameters, whereas the UA quantifies the effect on the energy performance and indoor thermal comfort of occupants. The workflow is integrated into a collaborative design platform and applied in a case study to support decision-makers in the early design stages for new developments, densification, or refurbishment scenarios.
keywords	Monte Carlo Simulation, Sensitivity Analysis, Uncertainty Analysis, Building Energy Simulation, SDG 13, SDG 11
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	067e
authors	Banz, George
year	1990
title	Expert Systems and Artificial Intelligence in Real Estate Development Planning
source	CIB W55/W66 Joint Symposium. 1990. 7 p. : ill. includes bibliography. -- Abstracts in English and French
summary	Expert systems and artificial intelligence can contribute substantially to the quality of real-estate development analysis. 'A. I. coaches' help correlate input and check the validity of schedules. Expert systems enhance life cycle cost analysis. Property value indicators become viable when used in conjunction with remote sensing and life style mapping
keywords	economics, life cycle, expert systems, analysis
series	CADline
last changed	1999/02/12 15:07

_id	caadria2021_110
id	caadria2021_110
authors	Bao, Ding Wen, Yan, Xin, Snooks, Roland and Xie, Yi Min
year	2021
title	SwarmBESO: Multi-agent and evolutionary computational design based on the principles of structural performance
doi	https://doi.org/10.52842/conf.caadria.2021.1.241
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 241-250
summary	This paper posits a design approach that integrates multi-agent generative algorithms and structural topology optimisation to design intricate, structurally efficient forms. The research proposes a connection between two dichotomous principles: architectural complexity and structural efficiency. Both multi-agent algorithms and Bi-directional evolutionary structural optimisation (BESO) (Huang and Xie 2010), are emerging techniques that have significant potential in the design of form and structure.This research proposes a structural behaviour feedback loop through encoding BESO structural rules within the logic of multi-agent algorithms. This hybridisation of topology optimisation and swarm intelligence, described here as SwarmBESO, is demonstrated through two simple structural models. The paper concludes by speculating on the potential of this approach for the design of intricate, complex structures and their potential realisation through additive manufacturing.
keywords	Swarm Intelligence; Multi-agent; BESO (bi-directional evolutionary structural optimisation); Intricate Architectural Form; Efficient Structure
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2015_279
id	ecaade2015_279
authors	Baquero, Pablo, Giannopoulou, Effimia and Cavazos, Jaime
year	2015
title	Strategies for Metallic Vault Structures - Aluminium Composite Panels Used as Structural Elements
doi	https://doi.org/10.52842/conf.ecaade.2015.2.169
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 169-176
summary	This article explains parametric, fabrication and teaching strategies used during a workshop for constructing a full scale, self supporting, vault metal structure realized with parametric manufacturing methods. The key aim is to construct a small size, easy assembled and transportable pavilion, while focusing on new design and construction methods of a façade system in which the structure, joint and skin will integrate functions in a unifying structural system. For the investigation, we explore materials commonly used in façade industry, such as aluminum profiles and aluminium composite panels (ACP).
wos	WOS:000372316000021
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2016_673
id	sigradi2016_673
authors	Baquero, Pablo; Calixto, Victor; Orciuoli, Affonso; Vincent, Charles
year	2016
title	Simulation and prototyping benefits on digital fabrication [Teaching experience on previous workshops]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.981-985
summary	This paper explains how parametric methods are informed by simulation and prototyping, methods that were deployed during some series of digital fabrication workshops, their evolution and specifically with the objective of fabricating using combination of materials and CNC techniques, such as, 3d printing, laser cutting and milling machine. Teaching these workshops were the results of simulating and prototyping with students from the Biodigital Master (ESARQ UIC 2016) and a workshop done during Sigradi (Florianopolis 2015).
keywords	Teaching, 3D printing, Milling, Patterns, Collaboration, Fabrication
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2020_409
id	caadria2020_409
authors	Naboni, Roberto and Paparella, Giulio
year	2020
title	Circular Concrete Construction Through Additive FDM Formwork
doi	https://doi.org/10.52842/conf.caadria.2020.1.233
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 233-242
summary	One of the major downsides of concrete construction is the difficulty to be adapted, modified and deconstructed. In this work, we look at the potential enabled by the use of Additive Formwork based on Fused Deposition Modelling, in order to design and manufacture structural elements which can be assembled and disassembled easily. We call this new typology of structures Circular Concrete Construction. The paper illustrates an integrated computational workflow, which encompasses design and fabrication. Technological aspects of the 3D printed formwork and its application in reversible node and strut connections are described, with reference to the material and structural aspects, as well as prototyping experiments. The work is a proof of concept that opens perspectives for a new type of reversible concrete construction.
keywords	Circular Concrete Construction; Additive Formwork; Additive Manufacturing; Digital Fabrication
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	barakat_theses_eaea2007
id	barakat_theses_eaea2007
authors	Barakat, Husam
year	2008
title	Analytical Study of the Projects of Students in the Architectural Design - Comparision Between Physical and Digital Models
source	Proceedings of the 8th European Architectural Endoscopy Association Conference
summary	Since its foundation in 1981, Architectural faculty has adopted traditional teaching methods for practical subjects such as architectural design and Urban planning. In these subjects, students submitted their projects and exams on (chanson) and (calk) sheets using various drawing tools. Such tools are still in use by students up to date in manually architectural concept presentation. This comes after the students pass a number of subjects related to art and engineering drawing that help the students in gaining drawing representation and rendering skills.
keywords	architectural concept, traditional teaching, computer technology
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	sigradi2023_510
id	sigradi2023_510
authors	Naboni, Roberto, Kunic, Anja, Jensen, Christina and Sander, Sara
year	2023
title	Re-VoxLam Truss. Topology optimisation and reclaimed voxel lamination of horizontal wood structures.
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1311–1322
summary	Despite its potential to decarbonise the built environment, wood is often found on construction sites as a source of waste rather than building material. In Denmark, wood is mainly used for temporary structures envisioned for short life cycles and single use, after which it is destined for incineration, defining it as “sustainable energy”. This research proposes an innovative design-to-fabrication process for sourcing timber waste as a valuable matter for a novel typology of structural elements, thereby extending their lifecycle and carbon sequestration capabilities. The work employs a voxel-based approach to designing and optimising complex wood structures, utilising computational stress analysis to determine material layouts reflecting the reclaimed stock. The physical construction voxels, with specific material strength and fibre orientation, are laminated into a functionally graded composite structure, namely the Re-VoxLam Beam. This prototype is demonstrated as a proof-of-concept of the proposed approach for decarbonising construction and upcycling wood waste.
keywords	Digital craft, Reclaimed timber, Voxel lamination, Multi-material structural layouts, Additive fabrication, Topology optimisation
series	SIGraDi
email
last changed	2024/03/08 14:08

_id	2832
authors	Baraniak, David W.
year	1987
title	Automatic Data Capture: Scanners Offer a Cost-effective Solution
source	computer Graphics World November, 1987. vol. 10: pp. 93-94, 97 : ill.
summary	table. In order to decide whether today's scanner deliver the price and performance a particular CAAD application demand, the author lists vendors, scanner type, raster to vector conversion editing raster vector, data exchange format and compares them
keywords	hardware, CAD, scanning, business
series	CADline
last changed	2003/06/02 13:58

_id	sigradi2015_8.264
id	sigradi2015_8.264
authors	Naboni, Roberto; Breseghello, Luca
year	2015
title	Weaving Enclosure. Material computation and novel forms of crafting
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 384-391.
summary	This paper presents a computationally based methodology arising from the application of weaving techniques for the design and construction of an experimental architectural system, Weaving Enclosure. The research explores the close correspondence between material properties and assembly systems found in the traditional craft of weaving, studied through analytical and laboratory tests, and then implemented through computational design and digital fabrication. The workflow for the generation of specific geometries related to the elastic nature of the material results in the design and fabrication of a self- standing interior partition with digitally conceived patterns, tuned parametrically to provide structural and screening performance.
keywords	Computational Design, Digital Crafting, Digital Fabrication, Material Computation, Weaving
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2023_46
id	sigradi2023_46
authors	Barashkov, Julia
year	2023
title	Customising Urban Joy: Urban Planning Mechanisms for the Mass - Customisation of Cities, through the Quantifiable Nature of Joy Using Geo-tagged Social Media Data
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 31–42
summary	The paper examines citizen participation in a digitally-driven society and the disparity between desired and existing cities. It emphasises the need to transform cities into adaptable environments that respond to the needs of residents. Traditional top-down urban planning often fails to match the flexible nature of digitised urban residents. To address this, an agent-based model is employed, evaluating urban environments based on individual sentiment derived from social media API. The study case of Wittenberge, Germany, showcases the methodology, including the creation of a 3D digital twin using open data sources and generating agents with unique personalities from social media keywords. These agents' "life satisfaction score" reflects their ability to fulfil daily needs and preferences within a 20-minute walking radius.
keywords	Data-based urban design, Citizen participation, Agent-based modelling, Social media sentiment analysis, Co-creation in cities
series	SIGraDi
email
last changed	2024/03/08 14:06

_id	caadria2024_238
id	caadria2024_238
authors	Barashkov, Julia
year	2024
title	Re-commoning Urban Spaces From the Bottom-Up: Empowering Urban Communities: A Digital Toolbox for Bottom-Up Intervention in Kottbusser Tor, Berlin
doi	https://doi.org/10.52842/conf.caadria.2024.2.241
source	Nicole Gardner, Christiane M. Herr, Likai Wang, Hirano Toshiki, Sumbul Ahmad Khan (eds.), ACCELERATED DESIGN - Proceedings of the 29th CAADRIA Conference, Singapore, 20-26 April 2024, Volume 2, pp. 241–250
summary	Urban planners and bodies of urban governance maintain an inherent divergence in the internal structures governing the integration of local communities and the fulfilment of their needs. Theoretical frameworks and contemporary digital tools often reinforce those inherent power imbalances, further exacerbating the disconnection between communities and their urban environments. While public administration holds the authority to access and utilise extensive datasets derived from digital urban statistics, they frequently lack the grassroots, bottom-up intelligence that local communities possess. On the other hand, local communities find themselves denied access to their urban data and face limitations in both capability and authority to generate meaningful changes in the urban fabric. This paper explores the empowerment of local communities with the tools, knowledge, and skillsets necessary to act upon their inherent bottom-up local intelligence to enable community-generated interventions and solutions to urban challenges. Through the context of Kottbusser Tor, Berlin, Germany, this study develops a toolbox designed to equip communities with the means to facilitate self-organised actions.
keywords	participatory urbanism, digital tools, self-organisation, community empowerment, ethical smart urbanism.
series	CAADRIA
email
last changed	2024/11/17 22:05

_id	sigradi2008_098
id	sigradi2008_098
authors	Barba, Salvatore; Nicola Pasquino
year	2008
title	A free SIG for evaluating the compatibility of a landscape and an incinerator [Un SIG libre para la evaluación de la compatibilidad paisajística de un incinerador]
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This research, which is just at its start, has been preliminary concentrated on the localization of a solid waste incinerator in the vicinities of a city - and in particular on finding the necessary data, rather than in the development of a new application.
keywords	Medio ambiente, modelos MC, gvSig.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2023_239
id	sigradi2023_239
authors	Barber Sarasola, Gabriela
year	2023
title	The Smart City Flâneur: Explorations of the Digital in Public Space
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 889–900
summary	The SXIX flâneur has mutated and unfolded by acquiring new urban consumption tools and logic. With the rise of smart cities, digital technologies act in the city, reconfiguring a phenomenon that represents new ways the citizen experiences and redefines the city. In Vidialab several projects combining digital technologies with urban-architectural heritage are developed. Three case studies representative of the application of different technologies are chosen. This paper seeks to reflect on these urban practices and their correlates from the perspective of the digital flâneur and the smart city.
keywords	Flâneur, Smart City, New Media, Heritage, Augmented Reality
series	SIGraDi
email
last changed	2024/03/08 14:07

_id	sigradi2016_627
id	sigradi2016_627
authors	Barber, Gabriela; Lafluf, Marcos
year	2016
title	Interactive Projection Mapping: Proyecto Patrimonio ANGLO
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.795-801
summary	This approach to the videomapping technique rises from the experience in the Vidialab environment. Starting from the digital fabrication of a representative model of Fray Bentos industrial landscape, declared World Heritage by UNESCO, a videomapping project develops with certain peculiarities. Here we expose this technique applied to a model as a form to explore tools in order to experience the heritage in an enriched and attractive way, combining image, information and immersive environments. Also the procedures used to provide an educational streak are presented
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	cf2017_337
id	cf2017_337
authors	Barber, Gabriela; Lafluf, Marcos; Amen, Fernando Garcia; Accuosto, Pablo
year	2017
title	Interactive Projection Mapping in Heritage: The Anglo Case
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 337-348.
summary	This work is the outcome of a multidisciplinary collaboration in the context of the VidiaLab (Laboratorio de Visualización Digital Avanzada). It proposes an application of interactive video mapping techniques as a form of experiencing the Fray Bentos industrial landscape, declared as a World Heritage Site by UNESCO in 2015. An immersive environment was created by enriching a physical scale model of the site with projected digital images and information, providing new and attractive ways of interaction with the cultural heritage. Proposals for future work and educational applications of the developed tools are also discussed.
keywords	Video Mapping, New Media Art, Heritage, Museum, Human-Computer Interaction
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	6c8e
authors	Barbera, Salvatore and Correnti, Gabriele
year	1986
title	Reticular and Linear Planning of Erecting Yards Aided by Personal Computer
doi	https://doi.org/10.52842/conf.ecaade.1986.157
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 157-166
summary	This study has been carried out during the Course of Ergotecnica Edile hold at the Instituto Dipartimentale di Architettura e Urbanistica of Catania University, and it has been addressed to the students of the Faculty of Civil Engineering (manufacturing and direction of civil works). The present study aims at instructing the students as refers to planning, through computers, erecting yards. Work-planning is specifically important with reference both to the starting program and to the carrying on of the work. Within this context, workplanning is useful as regard the control and contingent correction of the work. In the latter case, divergencies between work-evolution and forecast are of primary value.
series	eCAADe
last changed	2022/06/07 07:54

For more results click below: