Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 3148

Reformat results as: short short into frame detailed detailed into frame

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-01
id	ddss2008-01
authors	Viejo García, Pablo; Christian Keim
year	2008
title	Simulation model of heat and power demand in aGerman region until 2030Stuttgart Metropolitan Region as case study
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Energy demand is a major concern for the future of European Cities. Resource availability and costs, climate change, and their consequences are directly related with the energy consumption in our cities. In 2007 already more than half of the world population live in cities, and cities are the main consumers of energy. The model presented in this paper explores the possibility of estimate the demand of end energy (heat and power) by simulating with a cellular automaton land use changes in a German region, in this case, Stuttgart Metropolitan Region. Several approaches deal with problems due to data availability, non-spatial information sources, aggregation levels, quality and consistence of data, among others. This case study shows that a non-deterministic simulation model of energy demand related to urban growth is already feasible, with several constraints. Otherwise, the energy demand calculations differ in great manner depending on consumption sectors (residential, commercial, industrial, transport) and all these calculation models should be further improved. Software and hardware constraints have been as well identified, and stressed in the conclusions.
keywords	Complex systems, Self-organisation, Cellular automata, Geographical information systems, land-use change, end energy demand, energy planning systems
series	DDSS
last changed	2008/09/01 17:06

_id	ascaad2007_006
id	ascaad2007_006
authors	Afify, H.M.N. and Z. A. Abd ElGhaffar
year	2007
title	Advanced Digital Manufacturing Techniques (CAM) in Architecture
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 67-80
summary	Building projects today are not only born out digitally, but they are also realized digitally through "file-to-factory" processes of computer aided manufacturing (CAM) and computer numerically controlled (CNC) technologies. It was the challenge of constructability that brought into question, what new instruments of practice are needed to take advantage of the opportunities opened up by the digital modes of production, instead of whether a particular form is buildable. In this case of building construction, architects could design with attention to innovative details, afforded by unique shapes and sizes, knowing that whatever they created on their computer screen could be fabricated digitally for an affordable price. The aims of the research are to discuss and analyze the digital manufacturing techniques (CAM) in architecture and its fabrication, production process. To understand how these technologies fit within a broader context of architectural practice. The research begins with defining, what is digital manufacturing in architecture, its potentials, components and influences in the contemporary architecture. Further more it discusses the digital fabrication, Two- dimensional cutting, subtractive fabrication, additive fabrication and formative fabrication. The assembly technique, building skin, new materials and mass- customization in digital manufacturing techniques (CAM). That will be a hand in analyzing several case studies.
keywords	Digital technology in architecture, Digital manufacturing, Formative fabrication, New materials, Fabrication machines and software.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ecaade2007_012
id	ecaade2007_012
authors	Benoudjit, Moamed Amine; Coates, Paul S.
year	2007
title	Artificial Networks for Spatial Analysis
doi	https://doi.org/10.52842/conf.ecaade.2007.911
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 911-918
summary	The present paper aims to present a summary of my ongoing PhD research, which is concerned with the study of the possibilities of developing an analytical and design tool based on artificial neural networks (ANN) and other Artificial Intelligence (AI) and connectionist algorithms.
keywords	Space, classification, artificial neural networks, cellular automata
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2007_153
id	cf2007_153
authors	Benrós, Deborah; José P Duarte and Fernando Branco
year	2007
title	A System for Providing Customized Housing
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 153-166
summary	This paper describes a system for generating customized mass housing. The aim is to provide dwellings at an affordable cost with recourse to mass production and yet guarantee that they are tailored to their users. It combines two systems, a rule-based design system and a prefabricated building system. The integration of both systems is achieved through the development of a computer tool to assist designers in the various stages of the housing design process. This tool produces three kinds of outputs: three dimensional models, construction drawings, and a list of construction elements, including their cost and information for manufacturing.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	acadia07_174
id	acadia07_174
authors	Bontemps, Arnaud; Potvin, André; Demers, Claude
year	2007
title	The Dynamics of Physical Ambiences
doi	https://doi.org/10.52842/conf.acadia.2007.174
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 174-181
summary	This research proposes to support the reading of physical ambiences by the development of a representational technique which compiles, in a numerical interface, two types of data: sensory and filmic. These data are recorded through the use of a portable array equipped with sensors (Potvin 1997, 2002, 2004) as well as the acquisition of Video information of the moving environment. The compilation of information is carried out through a multi-media approach, by means of a program converting the environmental data into dynamic diagrams, as well as the creation of an interactive interface allowing a possible diffusion on the Web. This technique, named APMAP/Video, makes it possible to read out simultaneously spatial and environmental diversity. It is demonstrated through surveys taken at various seasons and time of the day at the new Caisse de dépôt et de placement headquarters in Montreal which is also the corpus for a SSHRC (Social Sciences and Humanities Research Council) research grant on Environmental Adaptability in Architecture (Potvin et al. 2003-2007). This case study shows that the technique can prove of great relevance for POEs (Post Occupancy Evaluation) as well as for assistance in a new design project.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaade2007_077
id	ecaade2007_077
authors	Breen, Jack; Stellingwerff, Martijn
year	2007
title	The DigiTile Project
doi	https://doi.org/10.52842/conf.ecaade.2007.059
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 59-66
summary	The influx of computer-based design and presentation platforms, particularly in conjunction with computer aided physical modelling and manufacturing techniques, has stimulated a renewed focus on imaginative, innovative architectural product design. Essentially, the ambition of the DigiTile exercise was to stimulate the development of individual proposals for new kinds of surface articulations on the basis of a tile-like unit, or set of units. Inspirations varied widely: from precedents ranging from history to nature, as well as from contemporary design practice and graphic imagery. The prevailing freshness and technical inquisitiveness amongst the participants contributed to the generation and concretisation of distinctive tiling concepts, many of which have arguably not been seen before. The findings and conclusions are based upon the array of outcomes from the programme so far, as well from a very recent session. Furthermore, the paper highlights the kinds of opportunities for hands-on education-based compositional studies that we foresee in the near future.
keywords	Computer aided manufacturing and modelling, composition, prototyping, tiling, ornamatics, education-based research
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2007_032
id	ecaade2007_032
authors	Bridges, Alan
year	2007
title	Scenario-based Design
doi	https://doi.org/10.52842/conf.ecaade.2007.441
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 441-446
summary	The concepts underlying “scenario-based” design are introduced and put forward as a computationally-supportable alternative to sketching in early-stage design. From the analysis of a number of structured interviews with practicing designers, key design scenarios are identified. These scenarios are then generalised and outline guidelines developed for structuring early stage design, making use of TRIZ methodologies.
keywords	Scenario, TRIZ, architectural design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2007_af04
id	sigradi2007_af04
authors	Briones, Carolina; Ava Fatah gen. Schieck; Chiron Mottram
year	2007
title	LEDs Urban Carpet, a socializing interactive interface for public environments [LEDs Urban Carpet, una instalación interactiva para sociabilizar en el espacio público]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 404-408
summary	The purpose of this paper is to explore the type of social interactions that can be generated when a technological platform is introduced in a public environment. Here we present an interactive urban installation, which use a body-input as a form of a non-traditional user interface. Its aim is to enhance novel experiences that can enrich interactions between people nearby, sharing the same space and the same playful atmosphere. The prototype incorporates a grid of lights that dynamically generates patterns according to pedestrian’s position over the carpet. The installation was tested in various locations around the City of Bath, UK.
keywords	Urban computing; Interactive installation; Body-input interface; Social interaction
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2007_af06
id	sigradi2007_af06
authors	Chiarella, Mauro; Underlea Bruscato; Rodrigo Garcia Alvarado; María Elena Tosello; Hernán Barría Chateau
year	2007
title	3x1 Digital Hybrids: International workshops and videoconferences about digital architecture [3x1 Híbridos Digitales: Talleres y videoconferencias internacionales sobre arquitectura digital]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 135-140
summary	Through the creation of an inter-text of different discursive levels, although for “natives as for digital immigrants”, it has developed a teaching experience in three Latin American scenarios (Chile, Argentina, Brasil), through two pedagogical modalities: international videoconferences and in person practical workshops. The videoconferences facilitated the general theoretical discussion, stating multiples contents, anticipating and framing the later activity of the in person workshop, and returning in discussions and critical insights at the end of each workshop. In the in person workshops, new design strategies of generation of spaces and surfaces were entered upon, through analog-digital resources of ideation and representation.
keywords	Hybrid; videoconference; workshop; fold
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	caadria2007_273
id	caadria2007_273
authors	Chitchian, Davood; H.C. Bekkering
year	2007
title	Sustaining Design Decision Makers in the AEC industry
doi	https://doi.org/10.52842/conf.caadria.2007.x.w3a
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Today’s typical decision making problem such as strategic planning, portfolio analysis, resource allocation and human resource management involves a variety of tangible and intangible strategic goals, conflicting constraints, dozens or hundreds of alternative initiatives to be pursued, and limited resources. A decision maker cannot meaningfully combine all of this information to make right decisions. To sustain decision makers in the Architecture, Engineering and Construction (AEC) industry, this paper proposes a tool to transfers a complex problem into a concept of hierarchical structure consisting of goal and its criteria and sub-criteria. Irrespective of the applied domains, this tool provides a flexible means for tackling the complex decision making process. It embeds a mathematical model for prioritization and decision making which is based on the Analytical Hierarchy Process (AHP).
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2007_076
id	ecaade2007_076
authors	Coates, Paul S.; Derix, Cristian
year	2007
title	Parsimonious Models of Urban Space
doi	https://doi.org/10.52842/conf.ecaade.2007.335
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 335-342
summary	This paper sets out an approach to urban modelling derived from early work with cellular automata and agglomeration models. In these cases the models are an example of distributed representation, where the rules built in to the model are replicated in all the discrete components of the model be they cells or agents. This is the classic AI. / AL paradigm of emergent systems. The paper describes the main structure of the models, and presents examples of the use of this modelling process in design education, pointing out the way dynamic models allow mapping on to interesting speculations about the dynamic of the city, and its social systems. The paper ends with a report on the use of such models as a design decision support system and how they will be used in planned work in master planning in the London Thames gateway area under the UK govt. sustainable communities initiative.
keywords	Urban modeling, space syntax, agent based modeling, cellular automata
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2007_137
id	ecaade2007_137
authors	Dillenburger, Benjamin; Thesseling, Frank; Kotnik, Toni; Annen, Monika; Fuhr, Claudia; Girot-Ifrah, Yael; Tann, Martin; Shin, Dong Youn; Markovic, Sladjana; Versteeg, Meindert; Wendt, Tobias; Zäh, Matthias
year	2007
title	Architectural Use of Computer Controlled Deformation Techniques on the Example of CNC-Bent Tube Structures
doi	https://doi.org/10.52842/conf.ecaade.2007.021
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 21-26
summary	Steel tubes as construction material have an enormous capacity. CNC bending machines have the ability to deform material into all three dimensions in contrast to other popular CNC techniques for architectural design that use subtractive methods like laser-cutting and milling. The research examines the potential of a digital deforming process of CNC-Bending. During three months the authors developed several design concepts, programmed the necessary software for generating the structure and produced three architectural prototypes shown at an exhibition. Altogether they were constructed out of more than 500 pieces of steel tubes and over 5000 bends.
keywords	CNC bending, NURBS-curve approximation, tubular structure, swarm behavior, parameterization
series	eCAADe
email
last changed	2022/06/07 07:55

_id	cf2007_000
id	cf2007_000
authors	Dong, Andy; Andrew vande Moere and John S. Gero (eds.)
year	2007
title	Computer Aided Architectural Design Futures 2007
source	Proceedings of the 12th International Conference [ISBN 978-1-4020-6527-9] Sydney 11-13 July 2007, 602 p.
summary	CAAD Futures is a biennial Conference that aims to promote the advancement of Computer Aided Architectural Design in the service of those concerned with the quality of the built environment. The conferences are organised under the auspices of the CAAD Futures Foundation. The series of conferences started in 1985 in Delft, and has since travelled to Eindhoven, Boston, Zurich, Pittsburgh, Singapore, Munich, Atlanta, Tainan and Vienna. The book contains papers selected from the 11th CAAD Futures conference which took place at the University of Sydney. The papers in this book cover a wide range of subjects and provide an excellent overview of the state-of-the-art in research on Computer Aided Architectural Design.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	ascaad2007_028
id	ascaad2007_028
authors	Elmasry, M.H. and E.M. Farid
year	2007
title	User Participation and Mass Customization as Key Factors in the Future Residential Building
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 327-342
summary	The adoption of mass customization concepts, new manufacturing technologies together with the user participation, can open up an opportunity to the future residential buildings to achieve both a status of art and commodity, breaking the typical dichotonomy in architecture and meeting the individual needs and values of the future clients .The paper emphasizes on the concept of introducing the design as critical selling point where the customers can make their choices and changes through an interactive Web site exploring how mass customization and co-design will affect the architectural design / construction process of the residential multi-storey buildings.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ascaad2007_061
id	ascaad2007_061
authors	Fujita, H.; J. Hakura and M. Kurematsu
year	2007
title	Cognitive Modeling in Design Based on Human Emotional reasoning: Computer based Cognitive interaction based on mimesis of human emotional behavior
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 783-798
summary	This paper presents a progress development results of Virtual intelligent interface based on human facial and voice recognition. We this is new challenge for sensing the user emotional space and interact with it. It is part of the cognitive spatial design needed to have the mentality of the designer been part of the system recognition. This is experimental built prototype. We think that the practices reported in this work contribute to integrate (corporate) the cognitive intention of the designer with the knowledge of the system, The architect can use these design practices to inhale the emotional practices into the design using such experiment.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	caadria2007_000
id	caadria2007_000
authors	Gang, Yu; Zhou Qi and Dong Wei (eds.)
year	2007
title	CAADRIA 2007 - Digitization and Globalization
doi	https://doi.org/10.52842/conf.caadria.2007
source	Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia / Nanjing (China) 19-21 April 2007, 694 p.
summary	Turning to 21st century, the globe has been rapidly becoming a small village as the transportation and communication tools become more efficient and more easily available to the public. So has this been happening in AEC industry (Architecture, Engineering and Construction). Digital technology has apparently changed the working process in the AEC industry, but not as efficiently as in manufacturing industry, such as automobile production. It might be mainly because of the diversified components and scattered sites with lower industry standards, especially against the background of customization and vernacular traditions of architecture. What roles can digital technology play in this development and how can we steer correctly this inevitable trend?
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:49

_id	ascaad2007_030
id	ascaad2007_030
authors	Hoog, J.;C. Falkner and P. Seifried
year	2007
title	Collaborative spaces as learning environments: How Schools of Architecture may find their Way into the Virtual World
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 357-364
summary	3D virtual environments provided by current information and communication technologies offer new opportunities for architecture, potentially opening a completely new domain for architectural practice. Within this paper we describe scenarios for the use of 3D virtual environments at schools of architecture based on experiences from an EC-funded research project for the establishment of 3D - virtual campus for VIPA (Virtual campus for virtual space design Provided for European Architects). The campus was conceived as an extension of the existing learning management system used at TU-Vienna, Moodle. Within VIPA three virtual environments were tested as collaborative labs, for teaching architecture, and as digital environmental design tools: Open Croquet, Blender and Second Life.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ascaad2007_044
id	ascaad2007_044
authors	Huang, C.-H. and R. J. Krawczyk
year	2007
title	Web Based BIM for Modular House Development: Query Approach in Consumer Participatory Design
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 559-570
summary	The paper describes the relationship of client’s requirements and available design options of the proposed system by examples of its current prototype. By integrating the nature of modularity in prefabricated housing design, a proposed web-based design system will provide information filtering questionnaires to assist customers in selecting appropriate design components. A methodology has been developed that can generate design options based on the client’s needs and available modular components from selected product suppliers making it possible to simulate the final design before processing orders for assembling and manufacturing. Overall, the research demonstrates the power of internet that acts as a feedback loop to receive the information from clients, streamline the communication in between design teams, and integrate all products and materials together.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	9da7
id	9da7
authors	Jong, S J, Soon, E H and Rafi, A
year	2007
title	Exploring motion sequence of virtual characters: Experimenting motion-capture variables
source	Proceedings of the 2nd International Conference on Geometric Modelling and Imaging (GMAI 07), ETH Zurich, Switzerland, 4-6 July, 91-96.
summary	The purpose of the research is to study the detail of motion of various subjects with differences in physical attributes. The research outlines how different physique produces different behavioural patterns based upon mass and proportion. This research focuses on ‘walk motion’ to identify the differences in each subject’s physical attributes by sampling subjects of physical differences. This experiment employs Vicon8i® Optical Motion Capture system (MOCAP) to study the detail of human motion by extracting the subjects’ core motions for analysis with pre-defined actions. The research used the findings to establish the relationship between height and weight against motion frequencies in 3D space.
keywords	human motion, actor physique, motion capture, motion editing, core motion
series	other
type	normal paper
email
last changed	2007/09/11 02:31

For more results click below: