Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2071

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2007_002
id	ascaad2007_002
authors	Abdellatif, R. and C. Calderon
year	2007
title	SecondLife: A Computer-Mediated Tool for Distance-Learning in Architecture Education?
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 17-34
summary	Despite the importance of distance learning for its ability to reach a wide audience, easiness to access materials, and its lower cost compared to traditional learning, architecture education has not been well served by distance education. This is because it has a higher level of learning objectives, it is taught by coaching methodologies, and involves nonverbal forms of communication. One of the most common learning methods used in the design studio is the Criticism/Critique, which is a graphic and oral type of communication between the tutor and the students. In this investigation, Second Life, a massive multi-user online virtual environment that offers three-dimensional spatial capabilities via Avatars impersonation, is used as a computer-mediated tool for text and graphic-based communication in a distance learning situation. The study describes a demonstration experiment where students had to communicate with their tutor, display and describe their projects at a distance, in a purposely designed criticism space in SecondLife. The main objective of this paper is to observe and document the effects and the use of SecondLife virtual environment as an online 3D graphical-based tool of computer-mediated communication in distance learning in architecture education. The study also answers some questions: How well did the students use the tools of the medium provide? Was there a sense of personal communication and realism gained through using Avatars in the virtual environment? Did SecondLife provide a successful means of communication for a graphic-based context? And what are the students’ opinions about the learning environment? Using multiple methods of data collection, mainly based on an electronic observation of the experiment, questioning the participants before and after the experiment, and the analysis of the chat transcripts, the study presents descriptive results of the experiment, and discusses its main features. Proposals for modifications are made for future replications.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	caadria2007_677
id	caadria2007_677
authors	Anbusivan, R.
year	2007
title	Automation of Passive Solar Design System
doi	https://doi.org/10.52842/conf.caadria.2007.x.l5x
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	This research, focus on the automation of passive solar design system using computational method. The quantitative nature of passive solar design system makes the automation possible. The automation is done in stages, because implementing the passive solar design system is not an isolated process, but intertwined with the overall design process. The first phase of automation concentrates in conceptual stage, to avoid major deviations in later stages of the design. The conceptual stage use Eco-grammar (A preset Design guidelines for corresponding climate) and user inputs for initial form generation. The second stage of automation is done after the user finalize the model with respect to its position rotation and arrangements. In this stage manipulation of vertex, edges and faces of the forms were manipulated using genetic algorithm. The value of mutation or crossover done in genetic algorithm is suggested by knowledge engine (preloaded design knowledge). Until the form obtains or reach closer to the desired values of performance the loop between analysis and mutation, crossover will be continued. On the basis of analysis result further manipulations may change from the previous which is guided by the knowledge engine.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ascaad2007_045
id	ascaad2007_045
authors	Bazlamit, R. and M. Verma
year	2007
title	Nature Replay: An immersive installation
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 571-586
summary	This project aims at addressing playgrounds and their utilization in current urban scenarios, in developing and under-developed countries. It experiments with digital technology to re-create a play space wherein children can actively engage with each other and the space utilizing upon a unique medium of play. As playgrounds have traditionally always been situated within a natural habitat or environment, this further reinforces the concept of developing the idea- based on something closely related to nature. Working around notions related to nature, music and how can children play around them; conceptualized ‘Nature rePlay”; an immersive environment making use of interactive digital media in both real urban settings and performing arts.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ijac20075402
id	ijac20075402
authors	Burry, Jane R.
year	2007
title	Mindful Spaces: Computational Geometry and the Conceptual Spaces in which Designers Operate
source	International Journal of Architectural Computing vol. 5 - no. 4, pp. 611-624
summary	Combinatorial computational geometry, while dealing with geometric objects as discrete entities, provides the means both to analyse and to construct relationships between these objects and relate them to other non-geometrical entities. This paper explores some ways in which this may be used in design through a review of six, one-semester-long design explorations by undergraduate and postgraduate students in the Flexible Modeling for Design and Prototyping course between 2004 and 2007. The course focuses on using computational geometry firstly to construct topologically defined design models based on graphs of relationships between objects (parametric design,) and concurrently to output physical prototypes from these "flexible models"(an application of numerical computational geometry). It supports students to make early design explorations. Many have built flexible models to explore design iterations for a static spatial outcome. Some have built models of real time responsive dynamic systems. In this educational context, computational geometry has enabled a range of design iterations that would have been challenging to uncover through physical analogue means alone. It has, perhaps more significantly, extended the students' own concept of the space in which they design.
series	journal
email
last changed	2008/02/25 20:30

_id	acadia07_104
id	acadia07_104
authors	Chen, Chien-Lin; Johnson, Brian R.
year	2007
title	DVIN: A Dual View Information Navigation System
doi	https://doi.org/10.52842/conf.acadia.2007.104
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 104-109
summary	Differences in the preferred modes of representation of architects and their clients create challenges to their collaboration in the design process. Traditional two-dimensional drawings such as plans, sections and elevations form the backbone of architectural representation, anchoring text labels to record relevant non-graphical information. Nominally geometric “slices” through the proposed building volume, these drawings employ abstractions and conventions unique to professional practice. In contrast, non-architects think about building configuration largely through experiential or photographic perspective. This challenge increases over the life of the project. Simple drawings, such as those used in schematic design, are easily understood by all parties. However, as the building design develops the architects encode more and more design detail through the drawing conventions of construction documents, inadvertently making this detail less and less accessible to non-architects. We present DVIN, a prototype system that uses coordinated plan and perspective views for navigation of building information models, linking the information to an individual’s spatial navigation skills rather than their document navigation skills. This web-based application was developed using Java and VRML. The prototype makes it easier for naive users to locate and query building information, whether they are a client, a facility manager, or possibly an emergency responder. * NOTE: two pages missing from the printed proceedings have been appended to the PDF version of this paper and numbered 'erratum page 1' and 'erratum page 2' *
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	cf2007_403
id	cf2007_403
authors	Chen, Yingjie; Zhenyu Qian and Robert Woodbury
year	2007
title	Local Navigation Can Reveal Implicit Relations
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 403-416
summary	This paper intends to analyze, compare, understand and explore the data relations among a collection, the collected items and user-created meaning appearing in different digital applications. Details of such relations are introduced and investigated with reference to several actual systems. In order to represent these three components in a way easy for users to interpret, navigate and interact, we introduce NEAR, a localized graph visualization tool to help people browse, understand and manipulate information in a digital architectural repository A•VI•RE.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	sigradi2007_af70
id	sigradi2007_af70
authors	Corona Martínez, Alfonso; Libertad Vigo; José R. Kós; Denise B. Pinheiro Machado
year	2007
title	Archinet-MetaUniversity: Alfa Project phase3: The transversal integration [Archinet-MetaUniversidad: Proyecto ALFA en Fase3: La integración transversal]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 131-134
summary	This paper presents the results of a workshop which took place in Rio de Janeiro and gathered Brazilian and international exchange students with tutors from eight universities located in Latin America and Europe. The design process highlighted the advantages and limitations of the communication between the tutors, educated with traditional tools and students who enter at the university already familiar with digital tools. The manipulation of images assumes a primary position, particularly in an environment based on several foreign languages. However, this process also exposed the limitations of images to represent the essence of the place.
keywords	Theory & Education; Design & Communication; Multidisciplinary Transversal Disciplines; Sustainability & Urban Preservation; Colaborative & Teaching implementations
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	ecaadesigradi2019_397
id	ecaadesigradi2019_397
authors	Cristie, Verina and Joyce, Sam Conrad
year	2019
title	'GHShot': a collaborative and distributed visual version control for Grasshopper parametric programming
doi	https://doi.org/10.52842/conf.ecaade.2019.3.035
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 35-44
summary	When working with parametric models, architects typically focus on using rather structuring them (Woodbury, 2010). As a result, increasing design complexity typically means a convoluted parametric model, amplifying known problems: 'hard to understand, modify, share and reuse' (Smith 2007; Davis 2011). This practice is in contrast with conventional software-programming where programmers are known to meticulously document and structure their code with versioning tool. In this paper, we argue that versioning tools could help to manage parametric modelling complexity, as it has been showing with software counterparts. Four key features of version control: committing, differentiating, branching, and merging, and how they could be implemented in a parametric design practice are discussed. Initial user test sessions with 5 student designers using GHShot Grasshopper version control plugin (Cristie and Joyce 2018, 2017) revealed that the plugin is useful to record and overview design progression, share model, and provide a fallback mechanism.
keywords	Version Control; Parametric Design; Collaborative Design; Design Exploration
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	b92c
id	b92c
authors	Derix, Christian
year	2012
title	Digital Masterplanning: Computing Urban Design
source	In Urban Design and Planning: Institution of Civil Engineers, Thomas Telford Publishers, ahead-of-print
summary	The digital revolution has finally reached urban design as one of the last design communities not very familiar with computing. This is despite the city and geography being the natural fields for systems analogy and digital models of mathematical and statistical simulation were developed in the 60s and 70s for urban planning, much before industrial or architectural design. The recent arrival of urban design simulations is however not as innovative and radical as their 50 year old counterparts since they use computing solely for policy visualization, quantity evaluation or pattern generation. The Computational Design and Research Group [CDR] at Aedas\|R&D started in 2007 to develop an open platform of lightweight applications – Digital Masterplanning – in collaboration with partners from academia and industry to provide methods for urban design, based on computational methods called meta-heuristic algorithms. An attempt to encode empirical knowledge and design assumptions into simulations is described where designers can assemble the resulting applications according to scales and brief into custom workflows.
keywords	Spatial Planning, Urban Design, Meta-Heuristic Algorithms, Computational Design
series	journal paper
type	normal paper
email
more	http://www.icevirtuallibrary.com/content/article/10.1680/udap.9.00041
last changed	2012/09/20 17:41

_id	ecaade2007_136
id	ecaade2007_136
authors	Dohmen, Philipp; Rüdenauer, Kai
year	2007
title	Digital Chains in Modern Architecture
doi	https://doi.org/10.52842/conf.ecaade.2007.801
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 801-804
summary	The “digital chain” is a continuous digital organization process, from the draft right into the manufacturing. Now one of these chains is applied on a mountain shelter. The individual steps are programmed and connected by universal interfaces. The computer is used not as passive digital drawing board, but as self-dependent tool that exerts influence on. Rules, dependence and aims, are formulated by the architect the computer can optimize due to its computing power. The role of the architect shifts thereby from the form designer to the role of a process designer. The aesthetics of the results is exciting and unusually, organically and self-evident - it is however always the result of given parameters. One topic is the complexity. The constructional modeling of the computers is a substantial support and easement. With programming techniques and parameterized construction, a high degree of individualizing becomes possible. A further point is efficiency. Construction with individual units, which former on was just realizable with high time and cost, become economically in this manner today. Furthermore computer-controlled machines work with precision and a detailing, which would be by workmanship neither temporally nor technically obtainable.
keywords	Digital chain, mass customization, one of a kind production
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2007_118
id	ecaade2007_118
authors	Fricker, Pia; Hovestadt, Ludger; Braach, Markus; Dillenburger, Benjamin; Dohmen, Philipp; Rüdenauer, Kai; Lemmerzahl, Steffen; Lehnerer, Alexander
year	2007
title	Organised Complexity
doi	https://doi.org/10.52842/conf.ecaade.2007.695
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 695-701
summary	The objective of the paper is to demonstrate the application of architectural research and design methods from the fields of strategic design, digital production and design chains to facilitate the completion of demanding large-scale building projects. Since we have concentrated the efforts of the past few years on various aspects of building practice while applying and testing the “Digital Chain” method to several concrete projects, we are now engaged with linking the individual phases in order to make the final step towards the reality of building practice. With this knowledge, we attempt to propose a new way of thinking in the design and building sector based on digitized planning processes.
keywords	Collaborative design, parametric design, user participation in design, strategic design
series	eCAADe
email
last changed	2022/06/07 07:50

_id	sigradi2007_af13
id	sigradi2007_af13
authors	Granero, Adriana Edith; Alicia Barrón; María Teresa Urruti
year	2007
title	Transformations in the educational system, Influence of the Digital Graph [Transformaciones en el sistema educacional, influencia de la Gráfica Digital]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 182-186
summary	The educative proposal was based on the summary attained through experiences piled up during the 2 last semester courses, 2/2006-1/2007. This proposal corresponds to a mix of methodology (by personal attendance / by internet). Founding on the Theory of the Game (Eric Berne 1960) and on different theories such as: Multiple intelligences (Haward Gardner 1983), Emotional Intelligence (Peter Salowey and John Mayer 1990, Goleman 1998), Social Intelligence (Goleman 2006), the Triarchy of Intelligence (Stemberg, R.J. 1985, 1997), “the hand of the human power”, it´s established that the power of the voice, that of the imagination, the reward, the commitment and association produce a significant increase of the productivity (Rosabeth Moss Kanter 2000), aside from the constructive processes of the knowledge (new pedagogical concepts constructivista of Ormrod J.E. 2003 and Tim O´Reilly 2004).
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ascaad2007_044
id	ascaad2007_044
authors	Huang, C.-H. and R. J. Krawczyk
year	2007
title	Web Based BIM for Modular House Development: Query Approach in Consumer Participatory Design
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 559-570
summary	The paper describes the relationship of client’s requirements and available design options of the proposed system by examples of its current prototype. By integrating the nature of modularity in prefabricated housing design, a proposed web-based design system will provide information filtering questionnaires to assist customers in selecting appropriate design components. A methodology has been developed that can generate design options based on the client’s needs and available modular components from selected product suppliers making it possible to simulate the final design before processing orders for assembling and manufacturing. Overall, the research demonstrates the power of internet that acts as a feedback loop to receive the information from clients, streamline the communication in between design teams, and integrate all products and materials together.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	2007_000
id	2007_000
authors	Kieferle, Joachim and Ehlers, Karen (eds.)
year	2007
title	Predicting the Future
doi	https://doi.org/10.52842/conf.ecaade.2007
source	25th eCAADe Conference Proceedings [ISBN 978-0-9541183-6-5], Frankfurt am Main (Germany) 26-29 September 2007, 962 p.
summary	Digital tools can support the whole design process from the early phases through to final production. They enable the project participants to gain a better understanding of ideas and issues throughout all project phases. The focus of the eCAADe 2007 conference is that of tools and methods that support the whole range of participants from laymen to specialists in communicating, planning, costing and realizing built projects in all of the architectural fields.
series	eCAADe
type	normal paper
email
more	http://www.ecaade.org
last changed	2022/06/07 07:49

_id	sigradi2007_af53
id	sigradi2007_af53
authors	Klinger, Kevin R.
year	2007
title	Information Exchange in Digitally Driven Architecture [El intercambio de información en arquitectura generada digitalmente]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 300-304
summary	Digital technology has altered modes of architectural production. Software enables architects to create complex digital models and exchange information used to envision, evaluate, simulate, fabricate, and assemble architecture. Digital technology is serving as the key agent for innovation in design, fabrication, and construction. This paper will articulate shifting skill sets necessary for digitally driven architecture and make the case for encouraging effective means of communication and information exchange through case study illustrations and presentation of a specific project developed at Ball State University’s Institute for Digital Fabrication and the Center for Media Design.
keywords	Digital exchange; master model; digital fabrication; immersive learning
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	ecaade2007_106
id	ecaade2007_106
authors	Lang, Silke Berit
year	2007
title	Predicting or Inventing the Future?
doi	https://doi.org/10.52842/conf.ecaade.2007.499
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 499-506
summary	In this paper we discuss the parallels between architectural design and strategic marketing in industry to advance the theme of predicting the future in architecture. Just like companies face the challenge to organize their R&D activities, architects develop different strategies for their designs. Looking at the architectural design process as well as at strategic planning done in companies we recognize that they have much in common. To advance the theme of predicting the future in architecture we draw parallels to strategic marketing in industry. Both activities require a clear vision regarding customer requirements, available technologies, and areas of operation and emerging markets. We report on a successfully implemented method Pictures of the Future at Siemens and relate it to architecture and show possibilities to expand the role of architectural design in the future. We opine that it is now time to expand the architectural curriculum towards Knowledge Architecture.
keywords	Information architecture, knowledge architecture, strategic planning and marketing
series	eCAADe
email
last changed	2022/06/07 07:52

_id	cf2007_279
id	cf2007_279
authors	Marques, Davis; Robert Woodbury
year	2007
title	Managing Contingency in Parametric Models through Implicit Relational Modeling
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 279-288
summary	Modeling and maintaining relationships in a parametric model compounds the work of the designer. When major changes in design direction take place, the work invested in the modeled relations is often lost. We contend that an implicit relational modeling approach provides for loosely coupled relations between the 'parts' of a design and mitigates the loss of work that occurs when changes take place. In our implemented system, implicit relations participate in a pattern of interaction known as the Dynamic Proxy.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	ascaad2007_059
id	ascaad2007_059
authors	Matsushima, S.; D. Sasaki and R. Takenaka
year	2007
title	Embodying Architectural Form and Space by Coupling Computer and Human Performance Using Motion Capture Technology: Study on Application of Motion Capture to Design Process for Generating New Geometry
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 757-766
summary	This research aims to develop fundamental design methodologies for human space and product design by motion capture of human activity. It is intended to generate new geometry using a motion capture system as design input device and then to develop it to design interior space and products such as furniture from data extracted from human motion. In order to produce a ubiquitous and comfortable environment, performance modeling focusing on the relationships between space and physical motion is needed. Making an object of complex shape is thought to be a new application of motion capture technology. This research proves that the numeric data of body actions can be transferred and developed to object shapes.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	cf2007_331
id	cf2007_331
authors	Moum, Anita; Tore Haugen and Christian Koch
year	2007
title	Stretching the Trousers Too Far? Convening societal and ICT development in the architectural and engineering practice
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 331-344
summary	The publicly and privately funded national R&D program ‘Digital Construction’ was initiated in 2003 in order to establish a common platform for interchanging digital information and to stimulate digital integration in the Danish building industry. This paper explores the relation between visions, strategies and tools formulated in the ‘Digital Construction’ program, and the first experiences made from implementing the 3D work method part of the program in an ongoing building project. The discussions in the paper are placed in the complex field between choosing strategies for integrating information and communication technologies on national level, and the effects of these strategies on real life building projects.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	acadia23_v1_174
id	acadia23_v1_174
authors	Nejur, Andrei
year	2023
title	NoeudAL Pavilion: Ultralight folded nodes for bespoke geometries
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 174-179.
summary	This research project, conducted at the University of Montreal School of Architecture, presents an innovative approach to the construction of reticulated structures, focusing on the development and application of a novel, ultralight aluminum node. The node, constructed from a folded, laser-cut, 1-mm aluminum sheet, is designed to accommodate wooden linear members with varied rectangular sections, making it adaptable to bespoke geometries and low valence nodes. This innovative design offers a solution to the long-standing challenge in the construction industry of balancing cost, customization, and weight for reticulated structures through novel node designs (Abdelwahab and Tsavdaridis 2019; Dyvik et al. 2023; Chilton 2007; Rochas 2014; Hassani et al. 2020).
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

For more results click below: