Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2429

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2013r_006
id	ecaade2013r_006
authors	Neto, Pedro L.; Vieira, Andrea P.; Moreira, Bruno; Ribeiro, Lígia
year	2013
title	A blended-learning approach in CAAD. Enhancing an architectural design studio experience by using collaborative web applications.
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 83-94
summary	This paper is the result of a research project started in 2007 in our architecture school which aimed to adopt a Blended-Learning approach in teaching CAAD to 3rd year architecture students, while integrating the knowledge produced by our R&D Unit on architectural representation and communication techniques and web applications. We present our main conclusions regarding this strategy’s results and the web applications involved to understand if they acted like catalysts for engaging students with their learning process and for promoting a better communication between them and their teachers. The article shows how this strategy created new forms of interaction making communication between teachers and students easier and giving the latter an active role in the learning process. We start with an introduction to CAAD’s pedagogical strategy; we then describe the strategy and model applied to several case studies and the materials and learning tools used. Finally, we’ll discuss the most significant results and draw the main conclusions. The results highlight how the learning process coming from the Blended-Learning strategy and the use of complementary web applications strengthens the student’s and teacher’s capacity to work in a close relationship while maintaining the student’s active role in the learning process.
keywords	Blended-learning; education in architecture; communication and representation; collaborative teaching and learning; design studio environment
email
last changed	2013/10/07 19:08

_id	ecaade2007_119
id	ecaade2007_119
authors	Zupancic, Tadeja; Mullins, Michael
year	2007
title	Reconfiguring Course Design in Virtual Learning Environments
doi	https://doi.org/10.52842/conf.ecaade.2007.647
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 647-654
summary	Although many administrators and educators are familiar with e-learning programs, learning management systems and portals, fewer may have experience with virtual distributed learning environments and their academic relevance. The blended learning experience of the VIPA e-learning project for architectural students offers some innovative insights into experientially oriented educational interfaces. A comparative analysis of VIPA courses and project results are presented in the paper. Special attention in the discussion is devoted to the improvements of e-learning solutions in architecture. The criterion of the relation between the actual applicability of selected e-learning solutions and elements of collaborative educational interfaces with VR are taken into account. A system of e-learning applicability levels in program and course development and implementation of architectural tectonics in courseware is developed from the evaluation process and which contributes to the discussion of future trends in architectural education.
keywords	Architectural education, e-learning, virtual space
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ascaad2007_002
id	ascaad2007_002
authors	Abdellatif, R. and C. Calderon
year	2007
title	SecondLife: A Computer-Mediated Tool for Distance-Learning in Architecture Education?
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 17-34
summary	Despite the importance of distance learning for its ability to reach a wide audience, easiness to access materials, and its lower cost compared to traditional learning, architecture education has not been well served by distance education. This is because it has a higher level of learning objectives, it is taught by coaching methodologies, and involves nonverbal forms of communication. One of the most common learning methods used in the design studio is the Criticism/Critique, which is a graphic and oral type of communication between the tutor and the students. In this investigation, Second Life, a massive multi-user online virtual environment that offers three-dimensional spatial capabilities via Avatars impersonation, is used as a computer-mediated tool for text and graphic-based communication in a distance learning situation. The study describes a demonstration experiment where students had to communicate with their tutor, display and describe their projects at a distance, in a purposely designed criticism space in SecondLife. The main objective of this paper is to observe and document the effects and the use of SecondLife virtual environment as an online 3D graphical-based tool of computer-mediated communication in distance learning in architecture education. The study also answers some questions: How well did the students use the tools of the medium provide? Was there a sense of personal communication and realism gained through using Avatars in the virtual environment? Did SecondLife provide a successful means of communication for a graphic-based context? And what are the students’ opinions about the learning environment? Using multiple methods of data collection, mainly based on an electronic observation of the experiment, questioning the participants before and after the experiment, and the analysis of the chat transcripts, the study presents descriptive results of the experiment, and discusses its main features. Proposals for modifications are made for future replications.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ascaad2007_035
id	ascaad2007_035
authors	Al-Ali, A.I.
year	2007
title	Readiness for the Use of Technology for effective learning via the vds: Case of the United Arab Emirates
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 439-456
summary	Review of the literature indicated that today’s knowledge-driven economy demands a workforce equipped with complex skills and attitudes such as problem solving, meta-cognitive skills, critical thinking and lifelong learning. Such skills can be acquired if learning and teaching are guided by the constructivist and cognitive learning theories. In particular, the constructivist approach emphasises effective learning processes based on learning by doing and collaboration. This approach is congruent with use of technologies, such as Virtual Design Studio (VDS), for the purpose of architecture education in design courses, but such use is lacking in the United Arab Emirates (UAE). It is thus important to assess the extent to which the constructivist and cognitive theories are implemented in teaching design courses in the Architecture schools of the UAE. It is also important to assess the effectiveness of employing technology in general and VDS in particular in implementing these theories. The author intends to study the relationship between effective learning on one hand and using VDS in implementing the constructivist and cognitive approaches on the other hand. Thus, the author conducted a preliminary study to gain a basic understanding of the difficulties, approaches, attitudes, perceptions, and motivation related to the learning of design in architecture schools in the UAE. Second, the investigation was designed to assess the extent to which the students would be interested in the use of sophisticated technology in the teaching and learning environment in the UAE architecture education schools in order to achieve effective learning. The study has been conducted in the United Arab Emirates University (UAEU). Methodology used for this was the focus group method. In addition to the focus group interviews with the UAEU students, unstructured individual interviews with lecturers from UAEU and the American University of Sharjah (AUS) have been carried out. Data analysis showed that students were not satisfied with the current teaching methods based on traditional lectures. It was concluded that students were ready to practice effective learning of design via the intermarriage of VDS and the constructivist and cognitive approaches. An ambiguity that remained was whether students were ready for assessment methods which are consistent with the constructivist approach.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	sigradi2008_080
id	sigradi2008_080
authors	Andrés, Roberto
year	2008
title	Hybrid Art > Synthesized Architecture
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper investigates possible intersections between some contemporary artistic modalities and architectural practice. At first, it describes and discusses different uses of art in architectural history. Through the analyzes of Le Corbusier’s artistic and architectural practices, it observes the limits of looking at art as only ‘inspiration’ for architectural form and points to the necessity of surpassing this formal approach. More than bringing pictorial ‘inspiration’, art, as a experimental field, can change our architectural procedures and approaches - a much richer and powerful addition to the development of architecture. It discusses then, the confluence of architecture, information and communication technologies. Very commonly present in our contemporary life, not only on the making of architecture – computer drawings and modeling of extravagant buildings – nor in ‘automated rooms’ of the millionaire’s houses. Televisions, telephones and computers leave the walls of our houses “with as many holes as a Swiss cheese”, as Flusser has pointed. The architecture has historically manipulated the way people interact, but this interaction now has been greatly changed by new technologies. Since is inevitable to think the contemporary world without them, it is extreme urgent that architects start dealing with this whole universe in a creative way. Important changes in architecture occur after professionals start to research and experiment with different artistic medias, not limiting their visions to painting and sculpture. The main hypothesis of this paper is that the experiments with new media art can bring the field of architecture closer to information and communication technologies. This confluence can only take form when architects rise questions about technology based interaction and automation during their creative process, embodying these concepts into the architecture repertoire. An educational experience was conducted in 2007 at UFMG Architecture School, in Brazil, with the intention of this activity was to allow students to research creatively with both information technology and architecture. The students’ goal was to create site-specific interventions on the school building, using physical and digital devices. Finally, the paper contextualizes this experience with the discussion above exposed. Concluding with an exposition of the potentialities of some contemporary art modalities (specially the hybrid ones) in qualifying architectural practices.
keywords	Architecture; Information and Communication Technologies; Digital Art; Site Specific Art; Architectural Learning.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2007_af109
id	sigradi2007_af109
authors	Angulo, Antonieta
year	2007
title	Mobile Learning Applications using Handheld Devices: Ubiquitous training of visual-spatial skills [Aplicaciones de Aprendizaje utilizando dispositivos móviles: Entrenamiento ubicuo de habilidades espaciales visuales]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 205-209
summary	This research seeks the development of mobile learning applications that provide ubiquitous training in visual-spatial skills using wireless handheld mobile devices (i.e. PDA, cell phones). The paper reports about the findings of a first stage in which the application targeted the handling of spatial representations and the qualitative understanding of 3D spaces. Evidence was collected regarding effectiveness of the instructional strategy related to specific aspects of the students’ visual-spatial competency and obtained qualitative feedback regarding the students’ level of satisfaction about the learning experience using the initial prototype. The paper provides recommendations for future implementations of an m-learning beta version.
keywords	M-learning; visual-spatial skills; handheld devices; ubiquitous training; architectural design
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2007_054
id	ecaade2007_054
authors	Angulo, Antonieta
year	2007
title	A Technology-Enhanced Metacognitive Strategy
doi	https://doi.org/10.52842/conf.ecaade.2007.465
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 465-471
summary	This paper describes the implementation of a technology-enhanced metacognitive strategy that seeks to improve the learning outcomes in beginners design studios. The implementation was based on the use of time-based rich-media tools that allowed the students to document and present the different stages of their design process. The results of the design assignment in the experimental group were compared with the results of the same assignment implemented without such a metacognitive strategy and this comparison has provided evidence about the potential benefits of the tested methods.
keywords	Design education, design process, time-based media, metacognitive strategy, self-regulated learning
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia07_146
id	acadia07_146
authors	Angulo, Antonieta
year	2007
title	Ubiquitous Training of Visual-Spatial Skills: On the Development of Mobile Applications Using Handheld Devices
doi	https://doi.org/10.52842/conf.acadia.2007.146
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 146-155
summary	This research project seeks to develop m-learning applications that provide training in visual-spatial skills using wireless handheld mobile devices (e.g. PDAs and cellular phones). The paper acknowledges the role of visual-spatial competence as fundamental in science and most creative endeavors, including its critical role in architectural design. It also recognizes that there is a substantial amount of anecdotal evidence suggesting that undergraduate students in architecture have serious limitations in applying visual-spatial skills for design activities. A potential solution to this problem is envisioned through the introduction of extra-curricular learning activities that are ubiquitous and learner-centered. The suggested m-learning applications will include a set of instructional modules making use of media-rich representations (graphics and animations) for conveying the nature of 3-D spaces. As a first step toward reaching this development, a prototype was created and used for testing learning strategies. This experiment provided evidence regarding improvements to specific aspects of the students’ visual-spatial competency, and it also collected qualitative feedback regarding the students’ level of satisfaction about the learning experience. The paper provides recommendations for a future implementation of the beta version, including the learning strategy, content authoring, publishing, deployment, and criteria for the selection of the most accessible mobile device.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaade2007_215
id	ecaade2007_215
authors	Boytscheff, Constantin; Sfeir, Marilu Kanacri
year	2007
title	Experimental Results in Immersive Virtual Reality (IVR): Searching Critical Design Factors within IVR to Increase Architectural Space Qualities
doi	https://doi.org/10.52842/conf.ecaade.2007.091
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 91-98
summary	The actual study in IVR (Immersive Virtual Reality) proposes a path which may provide meaningful information about the user’s behaviours and difficulties to articulate in immersive worlds. Beyond it, we are searching for parameters to improve design qualities in such an architectural space. Our interest is to use IVR as a medium to research the quality of spaces in particular the atmosphere of such spaces, on the basis of people’s interest and eagerness. Therefore it is important to comprehend the special conditions of the perception and the behaviour of the user in virtual spaces. The purpose is to understand the influence of an IVR environment upon the human being and to develop motivation for a personal use of virtual space as a learning environment. The aim of the analysis was to explore behaviour patterns in a simulated IVR environment. Moving from the dynamic of space, there arises a personal “space-time-system”.
keywords	Urban planning, virtual reality, immersive, teaching
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2007_205
id	ecaade2007_205
authors	Brown, André; Knight, Mike; Winchester, Martin
year	2007
title	An Architectural Learning Environment
doi	https://doi.org/10.52842/conf.ecaade.2007.671
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 671-675
summary	This paper contributes to the discussion on Virtual Learning Environments, particularly those aimed at the study of Architecture and allied or parallel disciplines. The campus at the University of Liverpool has been modeled and from this an interactive environment has been created that replicates the actual built form and landscape of the actual campus. We reflect on the appropriateness of such environments, compared to more conventional web based techniques for the delivery of educational information.
keywords	Virtual learning environment, virtual campus, virtual environment
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2007_af81
id	sigradi2007_af81
authors	Cattani, Airton; Asdrubal Antoniazzi; Jaqueline Viel Caberlon Pedone; Ana Elisia Costa; Paulo Vasconcelos Hayet
year	2007
title	Study of computer modeling tools in historical environmental research [Comparação entre ferramentas de modelagem computacional em pesquisa sobre ambientes históricos]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 332-335
summary	Computer simulation is an important learning tool for architecture, both for assessing projects and for investigating historical data. This study presents the initial results from research into computer simulation of historic spaces using computer modeling tools. The results discuss the viability of this kind of resource in studies of historical heritage, while at the same time consolidating learning procedures in virtual environments.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	sigradi2007_af96
id	sigradi2007_af96
authors	Griz, Cristiana; Gisele de Carvalho; Angélika Peixoto
year	2007
title	Cognitive Ergonomy: A combination of many didactics resources for the Architectural Drawing teaching [Ergonomia Cognitiva: A combinação de diversos recursos didáticos no ensino do Desenho Arquitetônico]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 35-40
summary	This work aims to present the importance of several didactic resources combination in the Architectural Drawing teaching, following the Cognitive Ergonomics concepts. From these concepts, we revised and modified the discipline teaching methodology, altering the techniques and the used technological resources. The combination of graphic software (generic, specific, tutorial) and physical models, demonstrate that the information driven to the specific interests of students improved the results in relation to productivity and satisfaction in the accomplishment of the tasks (learning). A partial evaluation of the discipline showed an improvement in: attendance, students' understanding, interaction among them, interest and more elaborated final results.
keywords	Architectural Drawing; Cognitive Ergonomy; Didactic Technology
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	be0c
id	be0c
authors	Hamza N, Horne M
year	2007
title	An operational model for teaching low energy architecture
source	Building and Environment Volume 42, Issue 11, November 2007, Pages 3841-3847 July 2007
summary	Awareness of the need to integrate sustainability at all levels has recently been gaining momentum in education to meet pedagogical university policy, government and employers’ expectations. Within the school of the Built Environment at Northumbria University an integrated course delivery has been adopted for second year students. This proposal intends to disseminate an operational model for integrating teaching and assessment between three modules which have traditionally been taught and assessed separately to achieve a low-energy house.
keywords	low-energy architecture, virtual reality, integrated curriculum, project decision making, mapping learning outcomes
series	other
type	normal paper
email
more	http://dx.doi.org/10.1016/j.buildenv.2006.11.003
last changed	2008/03/14 00:25

_id	caadria2009_016
id	caadria2009_016
authors	Hemsath, Timothy L. ; Ronald Bonnstetter, Leen-Kiat Soh and Robert Williams
year	2009
title	Digital CADCAM Pedagogy
doi	https://doi.org/10.52842/conf.caadria.2009.277
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 277-284
summary	Prototype manufacturing as an educational tool has been very successful at the college level in architecture and engineering design. This paper discusses an innovative inquiry-based learning approach rather than the problem-based learning models commonly utilized by other similar programs. For example, several research-funded technology projects (e.g., Cappelleri et al. 2007) look at involving students in problembased learning exercises (e.g., building robots); however, these exercises (while providing valuable experiences) have predetermined outcomes ingrained by the teachers, the project structure, and the components used to construct the devices. Therefore, inquisitive and creative problem solving is limited to the “kit-of-parts” in their approach to solving the problem. The inquiry-based CADCAM pedagogy model is more concerned with the process of solving a problem through the vehicle of prototyping than with the specificity of the design project itself. This approach has great potential. First, the need to solve the problem drives learning on multiple levels, integrating interdisciplinary ideas into the problem and solution. Second, the problem interlocks disciplines through inquiry knowledge building in team exercises. Finally, it encourages diversity and flexibility by allowing students to look at problems from multiples perspectives and points of view.
keywords	Inquiry-based education: CAD; CAM; pedagogy
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	acadia08_458
id	acadia08_458
authors	Hemsath, Timothy; Robert Williams; Ronald Bonnstetter; Leen-Kiat Soh
year	2008
title	Digital CADCAM Pedagogy Model: Intelligent Inquiry Education
doi	https://doi.org/10.52842/conf.acadia.2008.458
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 458-463
summary	Prototype manufacturing as an educational tool has been very successful at the college level in architecture and engineering design. This paper discusses an innovative inquiry-based learning approach rather than the problem-based learning models commonly utilized by other similar programs. For example, several research-funded technology projects (e.g., Cappelleri et al. 2007) look at involving students in problem-based learning exercises (e.g., building robots); however, these exercises (while providing valuable experiences) have predetermined outcomes ingrained by the teachers, the project structure, and the components used to construct the devices. Therefore, inquisitive and creative problem solving is limited to the “kit-of-parts” in their approach to solving the problem. The inquiry-based CADCAM pedagogy model is more concerned with the process of solving a problem through the vehicle of prototyping than with the specificity of the design project itself. This approach has great potential. First, the need to solve the problem drives learning on multiple levels, integrating interdisciplinary ideas into the problem and solution. Second, the problem interlocks disciplines through inquiry knowledge building in team exercises. Finally, it encourages diversity and flexibility by allowing students to look at problems from multiples perspectives and points of view.
keywords	CAD; Education; Evaluation; Pedagogy; Rapid Prototyping
series	ACADIA
last changed	2022/06/07 07:49

_id	ecaade2007_098
id	ecaade2007_098
authors	Heylighen, Ann; Neuckermans, Herman; Wolpers, Martin; Casaer, Mathias; Duval, Erik
year	2007
title	Sharing and Enriching Metadata in Architectural Repositories
doi	https://doi.org/10.52842/conf.ecaade.2007.401
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 401-408
summary	All over the world, students and teachers in architecture have been developing learning materials in various digital formats. Unfortunately, the material is not shared across school boundaries, and thus not exploited to its full extent. Mostly, technical and organisational limitations hamper the sharing and exchange of learning material, although this would benefit the global community of students and teachers in architecture. This paper presents a recently launched EU-initiative called MACE—Metadata for Architectural Contents in Europe—which aims at creating a European-wide space for the electronic descriptions of architectural information to be used in architectural education. The idea is to exchange and enhance the metadata of as many as possible digital repositories in order to allow searches by distant partners. Real access conditions to the data still remain those specific for each repository. By describing and discussing this initiative in its early stage, the paper aims to benefit from the exchange of ideas and experiences with similar initiatives, and to trigger the interest of new repository owners to join MACE.
keywords	Digital repositories, metadata, architecture
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ascaad2007_030
id	ascaad2007_030
authors	Hoog, J.;C. Falkner and P. Seifried
year	2007
title	Collaborative spaces as learning environments: How Schools of Architecture may find their Way into the Virtual World
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 357-364
summary	3D virtual environments provided by current information and communication technologies offer new opportunities for architecture, potentially opening a completely new domain for architectural practice. Within this paper we describe scenarios for the use of 3D virtual environments at schools of architecture based on experiences from an EC-funded research project for the establishment of 3D - virtual campus for VIPA (Virtual campus for virtual space design Provided for European Architects). The campus was conceived as an extension of the existing learning management system used at TU-Vienna, Moodle. Within VIPA three virtual environments were tested as collaborative labs, for teaching architecture, and as digital environmental design tools: Open Croquet, Blender and Second Life.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	d34b
id	d34b
authors	Horne M, Thompson E
year	2007
title	Virtual Reality and 3D modelling in built environment education
source	CONVR2007 7th Conference on Construction Applications of Virtual Reality, Penn State University, USA, 22-23 October 2007
summary	This study builds upon previous research on the integration of Virtual Reality (VR) within the built environment curriculum and aims to investigate the role of Virtual Reality and three-dimensional (3D) computer modelling on learning and teaching in a school of the built environment. In order to achieve this aim a number of academic experiences were analysed to explore the applicability and viability of 3D computer modelling and Virtual Reality (VR) into built environment subject areas. Although two-dimensional representations have been greatly accepted by built environment professions and education, three-dimensional computer representations and VR applications, offering interactivity and immersiveness, are not yet widely accepted. The project builds on previous studies which focused on selecting and implementing appropriate VR strategies and technologies (Horne and Hamza, 2006) and offers an approach on how three-dimensional computer modelling and virtual reality may be integrated into built environment teaching. It identifies the challenges and perceived benefits of doing so by academic staff and reports on the systematic approach which was adopted by Northumbria University, School of the Built Environment, to raise awareness of VR technologies across the spectrum of built environment disciplines. A selection of case studies is presented which illustrate how VR and 3D modelling have been integrated to extend traditional forms of representation and enhance the students’ learning experience. The attitudes perceptions, opinions and concerns of academic staff in regards to use of 3D and VR technologies in their teaching are discussed
keywords	Virtual Reality, 3D computer modelling, built environment, curriculum.
series	other
type	normal paper
email
last changed	2008/03/14 00:08

_id	ascaad2007_051
id	ascaad2007_051
authors	Ibrahim, M.M.
year	2007
title	Teaching BIM, what is missing? The challenge of integrating BIM based CAD in today’s architectural curricula
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 651-660
summary	Building Information Modeling is the technology converting the workplace in design firms around the world. Now, professionals as well as academia see the feasibility and benefits of converting to such a new technology. Therefore, it seems inevitable to start teaching BIM to architecture students. And as we keep using and depending on computers the way we are, it also seems inevitable that programming will soon become one of the core curriculum classes for architecture students. However, the same problems facing professionals in design firms are those facing academic educators in schools of architecture, but with some different aspects. The misconceptions about the reality of BIM and the lack of understanding the full potential of the applications are the common issues. Few schools have started looking at the problem of preparing their students for a career in a BIM enabled work environment. The difficulty is due partly to the novelty of the technology and partly to the dilemma of teaching one application versus teaching the technology behind it. Besides the steep learning curve there should be the early introduction to how to interact deeply with the application to edit its content. The training required for BIM based CAD should focus on the core concepts rather than the application interface and functionalities. Therefore, building a course for teaching these systems should follow a different path than with conventional CAD. The training should be tied closely to the design curriculum in the design schools. A special version with different interface might empower the user. Hence, enhancing the experience and relieving some of the concerns attached with introducing BIM in the architecture curriculum.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	cf2007_085
id	cf2007_085
authors	Iordanova, Ivanka; Temy Tidafi and Giovanni De Paoli
year	2007
title	Is a Digital Model Worth a Thousand Pictures?
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 85-98
summary	This communication addresses the use of a new type of referents database in the context of an architectural design studio. It discusses the results of design experiences held with the objective to study the cognitive effects of a teaching approach based on precedents and metaphors available as interactive and reusable digital models to students. The introduction of this referent-based approach is inspired by three major principles: the largely accepted fact that the creative work of architects is highly supported by referring to precedents and metaphors; the use of algorithmic digital methods to encapsulate architectural knowledge; and the constructivist approach to architectural design education. The study finds that the role of the modeled referents is helpful for the design studio learning, and that they are most creatively used when internalized by the student.
series	CAAD Futures
email
last changed	2007/07/06 12:47

For more results click below: