Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 974

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2007_af91
id	sigradi2007_af91
authors	Baltazar, Ana Paula; Denise Morado Nascimento; Silke Kapp; Rodrigo Santos Marcandier Gonçalves; Sulamita Fonseca Lino; Amanda Alves Olalquiaga; Joana Vieira da Silva; Felipe José Gontijo; Mara Coelho; Pedro Arthur Novaes Magalhães
year	2007
title	The intellectual property in digital interfaces and environments: The noncopyright option in the case of IDA system [A propriedade intelectual em ambientes e interfaces digitais: A opção pelo noncopyright no caso do sistema IDA]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 463-466
summary	This paper presents the discussions on intellectual property regarding digital interfaces, which were crucial for MOM/LOW (Living in Other Ways) to develop the system IDA (Digital interface for supporting housing production). It introduces IDA and its conceptual framework and differentiates intellectual property and authorship. Then, it examines the arguments for copyright, indicating them as myths or disguises of other intentions. This leads to examining some anti-copyright movements concluding that they follow the same logic of register. Thus, noncopyright (no license or register) seems to be the best means to protest against the current logic as also for conveying information.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	cf2007_303
id	cf2007_303
authors	Holzer, Dominik; Yamin Tengono and Steven Downing
year	2007
title	Developing a Framework for Linking Design Intelligence from Multiple Professions in the AEC Industry
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 303-316
summary	The research presented in this paper addresses the issue of bridging conceptual differences between the theories and practice of various disciplines in the AEC industry. The authors propose an application logic that works as a framework in assisting the evaluation process of multidisciplinary design. Parametric design templates assist in channeling and integrating information generated during the design process.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	caadria2007_171
id	caadria2007_171
authors	Mannan, Ashik Vaskor; M.Saleh Uddin
year	2007
title	Natural Behavior and Computational Logic for Optimization of Architectural Design
doi	https://doi.org/10.52842/conf.caadria.2007.x.t3j
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	In recent years much avant-garde architectural work has been dominated by a process based theoretical paradigm, inspired largely by various thinkers, critics, and philosophers. This particular ‘process practice’ attempts to address the paradox at the heart of contemporary production, by looking dialectically at the relationship between structure and ornament in nature with brainstorming and use of computer simulation.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2007_021
id	ecaade2007_021
authors	Mannan, Ashik Vaskor; Uddin, M. Saleh
year	2007
title	Natural Behavior and Computational Logic for Optimization of Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.2007.493
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 493-498
summary	In recent years much avant-garde architectural work has been dominated by a process based theoretical paradigm, inspired largely by various thinkers, critics, and philosophers. This particular ‘process practice’ attempts to address the paradox at the heart of contemporary production, by looking dialectically at the relationship between structure and ornament in nature with brainstorming and use of computer simulation. The goal of this paper is to develop a computer optimized system that can generate solutions for defining spaces involving a number of contextual relationships of activities. In particular, this research undertakes a pilot study (working team: Ashik Vaskor Mannan, Masrur Mamun Mithun, Lau Hon Yee Damien) on pattern and behavior in nature and implements the findings in to an architectural problem. The Initial Research focuses on Theory of emergence, Analysis of swarm behavior, and Analysis of ant system. Specific urban sites with different behavior patterns are chosen in Barcelona where this process is implemented to examine how they response to this course of action. This Bottom up method provides an optimum solution instead of a top down solution for an architectural problem
keywords	Design optimization, computational logic, natural behavior
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ijac20075302
id	ijac20075302
authors	Neumann, Oliver; Schmidt, Daniel
year	2007
title	Innovative CNC Timber Framing - Technology and Cultural Expression
source	International Journal of Architectural Computing vol. 5 - no. 3, pp. 469-486
summary	he design-build project for the outdoor theater roof structure at the UBC Malcolm Knapp Research Forest at Maple Ridge, British Columbia, explores technical, spatial, and cultural aspects of CNC wood fabrication. References for the project are technological innovation and formal expression of contemporary wood structures. The roof project illustrates how spatial concepts are informed by the logic of fabrication and methods of assembly. A reciprocal relationship between technology, space, and locale suggests that the introduction of new technology coincides with new spatial concepts. Innovative design in this project is defined as work that resonates at the intersection of the fields of technology, material science, manufacturing processes, and techniques of assembly that constitute the expanded context that projects need to engage. It is through collaborative design research on CNC wood fabrication technologies that common design and building practice is put into question, and boundaries are explored and expanded.
series	journal
last changed	2007/11/20 18:06

_id	acadia16_254
id	acadia16_254
authors	Sharmin, Shahida; Ahlquist, Sean
year	2016
title	Knit Architecture: Exploration of Hybrid Textile Composites Through the Activation of Integrated Material Behavior
doi	https://doi.org/10.52842/conf.acadia.2016.254
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 254-259
summary	The hybrid system in textile composites refers to the structural logic defined by Heino Engel, which describes a system that integrates multiple structural behaviors to achieve an equilibrium state (Engel 2007). This research explores a material system that can demonstrate a hybrid material behavior defined by the differentiated tensile and bending-active forces in a single, seamless knitted composite material. These behaviors were installed during the materialization phase and activated during the composite formation process. Here, the material formation involves two interdependent processes: 1) development of the knitted textile with integrated tensile and reinforced materials and 2) development of the composite by applying pre-stress and vacuuming the localized area with reinforcements in a consistent resin-based matrix. The flat bed industrial weft knitting machine has been utilized to develop the knitted textile component of the system with a controlled knit structure. This enables us to control the material types, densities, and cross sections with integrated multiple layers/ribs and thus, the performance of the textile at the scale of fiber structure. Both of these aspects were researched in parallel, using physical and computational methods informed and shaped by the potentials and constraints of each other. A series of studies has been utilized to develop small-scale prototypes that depict the potential of the hybrid textile composite as the generator of complex form and bending active structures. Ultimately, it indicates the possibilities of hybrid textile composite materials as self-structuring lightweight components that can perform as highly articulated and differentiated seamless architectural elements that are capable of transforming the perception of light, space, and touch.
keywords	form-finding, programmable materials, composite forming processes, embedded responsiveness
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	ijac20075404
id	ijac20075404
authors	Wierzbicki, Madalina N.; de Silva, Clarence W.
year	2007
title	Design Tools for Foldable Structures with Application of Fuzzy Logic
source	International Journal of Architectural Computing vol. 5 - no. 4, pp. 645-662
summary	Rigidly foldable shells offer tremendous potential for developing kinetic architectural structures. However, the added element of motion poses new design challenges. Initially, sketchy shell geometry is constructed to reflect the intended form. Further steps involve assuring an error free folding within a range that satisfies desired functional requirements. The kinematics of a parallel topology of the shell's geometry is difficult to express algorithmically what prevents from developing of automated adjustment tools based on computational methods. The geometry can be adjusted manually based on intuitive observations; however the process is tedious, time consuming and unpredictable. This paper develops automated adjustment tools based on the intuitive approach of a human designer. The study applies the fuzzy logic formalism as a computational interface between human approach and structured adjustments to the geometry. The advantages of fuzzy logic stem from its natural ability to represent human knowledge and effectiveness in reconciling ambiguities, uncertainties and redundancies that the intuitive human approach brings along. The development steps of fuzzy logic based algorithm are presented. Performed evaluation tests and the results are discussed.
series	journal
last changed	2008/02/25 20:30

_id	acadia07_250
id	acadia07_250
authors	Wierzbicki-Neagu, Madalina; de Silva, Clarence W.
year	2007
title	Development of Design Workflows for Kinetic Structures Using Fuzzy Logic
doi	https://doi.org/10.52842/conf.acadia.2007.250
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 250-261
summary	Kinetic structures offer the means to significantly expand the functional and performance features of traditionally static architectural solutions. However, the added element of motion creates considerable challenges during conceptualization and introduction into existing design workflows. Rigidly foldable shells offer tremendous potential for developing kinetic architectural structures. They require few support points, eliminate sliding overlaps and are relatively easy to mock up as initial concepts. Achieving the desired motion range, however, requires a significant design effort. If performed manually, the motion optimization is tedious and unpredictable. This paper examines possible optimization algorithmic strategies with the use of fuzzy logic. Specifically the paper focuses on the application of fuzzy logic as a tool for effectively negotiating modifications of complex linked geometries while using intuitive, high level statements and directives. Highlighted is the potential of fuzzy logic-based algorithms as tools that can help the transition of existing design workflows into environments that can handle extended challenges involving kinetic geometries.
series	ACADIA
email
last changed	2022/06/07 07:57

_id	ecaade2007_188
id	ecaade2007_188
authors	Yan, Wei; Liu, Geqing
year	2007
title	BIMGame: Integrating Building Information Modeling and Games to Enhance Sustainable Design and Education
doi	https://doi.org/10.52842/conf.ecaade.2007.211
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 211-218
summary	The ongoing research project develops a new process and related tools to enhance architectural design and education for sustainability. The new process consists of design, play, and update phases. First, in the design phase, designers (professionals or students) use Building Information Modeling (BIM) for representing architectural geometric information and non-geometric information. Second, in the play phase, designers will play games with their designed BIM model. The BIM model is made accessible to educational games through Application Programming Interface (API) of BIM. Both geometric and non-geometric information of BIM are brought into games as content. Game components such as characters (acting as virtual building users), graphics, sound, physics, artificial intelligence, game logic etc., can be added into the games. The games act as a simulation environment for both human activities and physical dynamics in buildings. Designers will be informed about the evaluation of their design in terms of sustainability and about the general design strategies and specific solutions in an interactive and fun way. Finally, in the update phase, the games will allow designers to modify the design and/or the building users’ behaviors/life styles until satisfactory performance is achieved. The design modification will be transferred back into the architectural design through the same API of BIM.
keywords	Building information modeling, BIM, game, sustainability
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ecaade2022_194
id	ecaade2022_194
authors	Fuchkina, Ekaterina, Bielik, Martin, Schneider, Sven, Ossenberg-Engels, Tobias and Hämmerle, Alexander
year	2022
title	Space Matcher - An interactive toolbox for assisting in spatializing & testing office programmes using graph centralities
doi	https://doi.org/10.52842/conf.ecaade.2022.2.039
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, pp. 39–46
summary	Graph-based representations of functional requirements (adjacencies, bubble diagram) are a common and useful method that supports architects in the conceptual phase of planning. However, the task of specifying the functional requirements through an adjacency graph can be challenging due to a quadratic growth of complexity in relation to the number of spaces. In turn, this increase of complexity challenges the designer searching for solutions that fulfill these functional requirements. There are systems that aim to address the difficulties related to graph-based space allocation. They, for instance, use fuzzy logic to weight the edges of a graph (i.e., specify relations between spaces) and spring systems (Newtonian gravitation model) to visually clarify the resulting proximity of all spaces according to the rules. Nevertheless, the problem of specifying large-scale adjacencies itself is omitted due to the assumption that such matrices are correctly filled in some previous steps. Moreover, the translation of the resulting graph into a spatial configuration is rarely supported. This work addresses these limitations and proposes a set of tools to assist the designer when defining the adjacency requirements and searching for design solutions that fulfill these requirements. Our approach aims to reduce the complexity of the design task by using graph centrality-based design heuristics. We discuss these heuristics and show their application in a scenario where a new spatial program needs to be allocated into an existing building.
keywords	Graph Theory, Adjacency Graph, Bubble Diagram, Space Planning
series	eCAADe
email
last changed	2024/04/22 07:10

_id	ascaad2007_058
id	ascaad2007_058
authors	Abdelhameed, W. and Y. Kobayashi
year	2007
title	Developing a New Approach of Computer Use ‘KISS Modeling’ for Design-Ideas Alternatives of Form Massing: A framework for three-Dimensional Shape Recognition in Initial Design Phases
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 745-756
summary	This research aims at developing a new approach called ‘KISS Modeling’. KISS is generally a rule of ‘Keep It Simple, Stupid’ that will be applied in modeling process investigated and presented by the research. The new approach is implemented in a computer program ‘KISS Modeling’ that generates three dimensional forms based on simplifying the concept of shape recognition in design. The research, however, does not employ totally concepts of shape recognition or shape understanding in Artificial Intelligence and psychology. The research, in summary, investigates and describes: 1) a new approach of computer use contributing to generating design-ideas alternatives of form massing in initial design phases, within a simple way that any designer can understand at single glance, 2) implementation of shape recognition for generative three dimensional forms, 3) function to generate different outputs from different recognition, and 4) case studies introduced through applications and functions of the three dimensional modeling system presented by the research. The research concluded that the introduced processes help the user improve the management of conceptual designing through facilitating a discourse of his/her modeling of design-ideas massing.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ascaad2007_002
id	ascaad2007_002
authors	Abdellatif, R. and C. Calderon
year	2007
title	SecondLife: A Computer-Mediated Tool for Distance-Learning in Architecture Education?
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 17-34
summary	Despite the importance of distance learning for its ability to reach a wide audience, easiness to access materials, and its lower cost compared to traditional learning, architecture education has not been well served by distance education. This is because it has a higher level of learning objectives, it is taught by coaching methodologies, and involves nonverbal forms of communication. One of the most common learning methods used in the design studio is the Criticism/Critique, which is a graphic and oral type of communication between the tutor and the students. In this investigation, Second Life, a massive multi-user online virtual environment that offers three-dimensional spatial capabilities via Avatars impersonation, is used as a computer-mediated tool for text and graphic-based communication in a distance learning situation. The study describes a demonstration experiment where students had to communicate with their tutor, display and describe their projects at a distance, in a purposely designed criticism space in SecondLife. The main objective of this paper is to observe and document the effects and the use of SecondLife virtual environment as an online 3D graphical-based tool of computer-mediated communication in distance learning in architecture education. The study also answers some questions: How well did the students use the tools of the medium provide? Was there a sense of personal communication and realism gained through using Avatars in the virtual environment? Did SecondLife provide a successful means of communication for a graphic-based context? And what are the students’ opinions about the learning environment? Using multiple methods of data collection, mainly based on an electronic observation of the experiment, questioning the participants before and after the experiment, and the analysis of the chat transcripts, the study presents descriptive results of the experiment, and discusses its main features. Proposals for modifications are made for future replications.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	16fe
id	16fe
authors	Abdelmohsen, Sherif; Do, Ellen Yi-Luen
year	2007
title	Tracking Design Development through Decomposing Sketching Processes
source	Digital proceedings of the International Association of Societies of Design Research (IASDR 2007), Emerging Trends in Design Research, Hong Kong Polytechnic University School of Design, Hong Kong.
summary	We conducted a protocol study of the architectural sketching process. We decompose the process into process flows to explore the extent to which it expresses concept development in schematic and refined design phases. We track the development of design concepts in these phases by following the process flows of individual sketched strokes. We argue that each stroke drawn by the designer reveals a probability of an embedded concept, and that this concept is either promoted and propagated throughout the design phases, or blocked while designing. We expand the notion of lateral and vertical transformation in design by introducing a set of processes described as cross propagation, lateral promotion and vertical promotion.
series	other
type	normal paper
email
last changed	2010/01/30 07:19

_id	caadria2007_029
id	caadria2007_029
authors	Abdelmohsen, Sherif; Ellen Yi-Luen Do
year	2007
title	TangiCAD: Tangible Interface for Manipulating Architectural 3D Models
doi	https://doi.org/10.52842/conf.caadria.2007.x.x8o
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	This paper presents an interface for interacting with tangible objects to produce and edit architectural 3D models, called TangiCAD. TangiCAD is a tangible/virtual construction kit which allows architects to manipulate virtual models using easy hand control of tangible cubes, as an alternative interface for 3D modeling. It consists of a set of tangible cubes representing architectural elements, such as walls, columns, slabs,…etc., in addition to some editing operations. With more developed versions, the paper argues that architects could use tangible interfaces to carry out 3D modeling in an intuitive way, using their "flip-the-box" hands-on movement.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ascaad2007_006
id	ascaad2007_006
authors	Afify, H.M.N. and Z. A. Abd ElGhaffar
year	2007
title	Advanced Digital Manufacturing Techniques (CAM) in Architecture
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 67-80
summary	Building projects today are not only born out digitally, but they are also realized digitally through "file-to-factory" processes of computer aided manufacturing (CAM) and computer numerically controlled (CNC) technologies. It was the challenge of constructability that brought into question, what new instruments of practice are needed to take advantage of the opportunities opened up by the digital modes of production, instead of whether a particular form is buildable. In this case of building construction, architects could design with attention to innovative details, afforded by unique shapes and sizes, knowing that whatever they created on their computer screen could be fabricated digitally for an affordable price. The aims of the research are to discuss and analyze the digital manufacturing techniques (CAM) in architecture and its fabrication, production process. To understand how these technologies fit within a broader context of architectural practice. The research begins with defining, what is digital manufacturing in architecture, its potentials, components and influences in the contemporary architecture. Further more it discusses the digital fabrication, Two- dimensional cutting, subtractive fabrication, additive fabrication and formative fabrication. The assembly technique, building skin, new materials and mass- customization in digital manufacturing techniques (CAM). That will be a hand in analyzing several case studies.
keywords	Digital technology in architecture, Digital manufacturing, Formative fabrication, New materials, Fabrication machines and software.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ecaade2007_226
id	ecaade2007_226
authors	Agger, Kristian; Lassen, Michael; Knudsen, Nikolaj; Borup, Ruben; Rimestad, Jens; Norholdt, Peter; Bramsen, Nikolaj
year	2007
title	B-processor
doi	https://doi.org/10.52842/conf.ecaade.2007.043
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 43-50
summary	The B-processor is a redesign of the digital building information modelling/managing concept: Addressing the whole building industry participants and all phases in the building process. Offering a new “standard” for digital building information structure with generic modelling and evaluation tools in the B-model kernel. Plug-in structure for free extension of the B-processor system by the Building Industry. Kernel prototyped in Java to be downloaded for free – open source.
keywords	Digital applications in construction, digital fabrication and construction, prediction and evaluation, design methodology, generative design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2007_152
id	ecaade2007_152
authors	Ahmad, Sumbul; Chase, Scott C.
year	2007
title	Transforming Grammars for Goal Driven Style Innovation
doi	https://doi.org/10.52842/conf.ecaade.2007.879
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 879-886
summary	Shape grammar transformations have been used for developing new design styles by the systematic modification of grammars that encode existing styles. We make use of a style description scheme to aid grammar transformations for goal driven style change. A rule base was authored for the design of Greek temple facades, and was augmented with a style description scheme. These were tested at a student workshop wherein students were asked to develop grammars based on given style briefs. Results gained from the workshop confirmed that most students were able to assemble and transform grammars successfully. The method was found to be useful for teaching style and grammars to students and novice designers.
keywords	Design grammars, style, generative design, teaching
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	bsct_ahmeti
id	bsct_ahmeti
authors	Ahmeti, Flamur
year	2007
title	Efficiency of Lightweight Structural Forms: The Case of Treelike Structures - A comparative Structural Analysis
source	Vienna University of Technology; Building Science & Technology
summary	This work addresses the structural efficiency of lightweight tree-like structures for three case studies: Stuttgart Airport, Beaverton Library, and Thermal Bad Oeyenhausen. The case studies are simulated using Build simulation software, to determine the stresses induced in each structure. The material efficiency and shapes areexplored in terms of load bearing structures. Hybrids of the above structures are formed to compare the pattern morphology used by various types of tree-like structure and assess the structural behavior. In addition, (steel, wood and concrete) materials are compared to determine which would have better structural performance. In order to show the resemblance between the growing trees and the tree-like structures, an example of both cases is simulated and stresses evaluated. Results show that, in general, the minimum stress and deformations are obtained for steel. Structures made out of this material also exhibit higher load bearing capability, optimum stability factors and the best geometric efficiency, inspite of higher specific weight (10 times wood, and 3 times concrete).
series	thesis:MSc
email
more	http://cec.tuwien.ac.at
last changed	2007/07/16 17:51

_id	ascaad2007_035
id	ascaad2007_035
authors	Al-Ali, A.I.
year	2007
title	Readiness for the Use of Technology for effective learning via the vds: Case of the United Arab Emirates
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 439-456
summary	Review of the literature indicated that today’s knowledge-driven economy demands a workforce equipped with complex skills and attitudes such as problem solving, meta-cognitive skills, critical thinking and lifelong learning. Such skills can be acquired if learning and teaching are guided by the constructivist and cognitive learning theories. In particular, the constructivist approach emphasises effective learning processes based on learning by doing and collaboration. This approach is congruent with use of technologies, such as Virtual Design Studio (VDS), for the purpose of architecture education in design courses, but such use is lacking in the United Arab Emirates (UAE). It is thus important to assess the extent to which the constructivist and cognitive theories are implemented in teaching design courses in the Architecture schools of the UAE. It is also important to assess the effectiveness of employing technology in general and VDS in particular in implementing these theories. The author intends to study the relationship between effective learning on one hand and using VDS in implementing the constructivist and cognitive approaches on the other hand. Thus, the author conducted a preliminary study to gain a basic understanding of the difficulties, approaches, attitudes, perceptions, and motivation related to the learning of design in architecture schools in the UAE. Second, the investigation was designed to assess the extent to which the students would be interested in the use of sophisticated technology in the teaching and learning environment in the UAE architecture education schools in order to achieve effective learning. The study has been conducted in the United Arab Emirates University (UAEU). Methodology used for this was the focus group method. In addition to the focus group interviews with the UAEU students, unstructured individual interviews with lecturers from UAEU and the American University of Sharjah (AUS) have been carried out. Data analysis showed that students were not satisfied with the current teaching methods based on traditional lectures. It was concluded that students were ready to practice effective learning of design via the intermarriage of VDS and the constructivist and cognitive approaches. An ambiguity that remained was whether students were ready for assessment methods which are consistent with the constructivist approach.
series	ASCAAD
email
last changed	2008/01/21 22:00

For more results click below: