Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1972

Reformat results as: short short into frame detailed detailed into frame

_id	ddss2008-25
id	ddss2008-25
authors	Antoni, Jean-Philippe; P. Frankhauser, C. Tannier, S. Youssoufi
year	2008
title	Simulating and assessing prospective scenariosA comparative approach in urban planning
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	The first part of the paper is centred on the phenomena of urban growth, in order to set the rules for a sustainable scenario of urban development. Then we enter the core of the paper that is the comparison of models. For each of the three compared models, we describe its main theoretical characteristics, the chosen parameters, and the obtained results. In section 6, heterogeneity of the produced results is discussed, and we highlight the points of interest and the lacks of the three models. Here we show that results we obtained feed debates about urban growth management. Finally, concluding remarks at the end of the paper address the general topic of the evaluation of the quality of simulation results.
keywords	Urban sprawl, sustainable development, fractals, cellular automata, spatial interaction models
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-09
id	ddss2008-09
authors	Bates-Brkljac, N.
year	2008
title	Towards client-focused architectural representationsas a facilitator for improved design decision-makingprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper focuses on architectural representations as a means of communicating design schemes in the process of decision-making. It reports on the study, which investigated people’s responses to different forms of architectural representations. The paper starts with the discussion about participation in decision-making process and the potential benefits of using computer generated representations. Then, it describes the research study and examines results of the investigation. In the final section it is argued that client focused architectural representations are needed to support the exchange of views and discussion amongst different stakeholders in order to reduce the requirement for trained interpretation and encourage the participation in the decision making process.
keywords	Architectural representations, Perceived credibility, Design decision making
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-36
id	ddss2008-36
authors	Burger, J.; R.P. de Graaf, and G.J. Helmerhorst
year	2008
title	Dynamic Actor Network Steering And ControlManaging Actor Networks In The Construction Process
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
keywords	Multi-actor, network planning, critical path, linear programming
series	DDSS
last changed	2008/09/01 17:06

_id	caadria2010_031
id	caadria2010_031
authors	Burke, A.; B. Coorey, D. Hill and J. McDermott
year	2010
title	Urban micro-informatics: a test case for high-resolution urban modelling through aggregating public information sources
doi	https://doi.org/10.52842/conf.caadria.2010.327
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 327-336
summary	Our contention is that the city is a rich collection of urban micro-ecologies in continuous formation that include information types outside the traditional boundaries of urban design, city planning, and architecture and their native data fields. This paper discusses working with non-standard urban data types of a highly granular nature, and the analytical possibilities and technical issues associated with their aggregation, through a post professional masters level research studio project run in 2008. Opportunities for novel urban analysis arising from this process are discussed in the context of typical urban planning and analysis systems and locative media practices. This research bought to light specific technical and conceptual issues arising from the combination of processes including sources of data, data collection methods, data formatting, aggregating and visualisation. The range and nature of publicly available information and its value in an urban analysis context is also explored, linking collective information sites such as Pachube, to local environmental analysis and sensor webs. These are discussed in this paper, toward determining the possibilities for novel understandings of the city from a user centric, real-time urban perspective.
keywords	Urban; informatics; processing; ubicomp; visualisation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2023_253
id	sigradi2023_253
authors	Cavalcanti, Isabella, Teixeira Mendes, Leticia and Albuquerque, Fernando
year	2023
title	From Modeling to Collective Digital Fabrication: Experience of the "Banco Cabaça"
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 543–554
summary	This paper presents an experience of collective digital fabrication and parametric modeling of furniture made with recycled plastic waste, inspired by natural elements of the Brazilian northeast. In addition to conventional joinery techniques, we highlight the technologies of rapid prototyping (PR) and digital fabrication (FD) (Volpato, 2007, Pupo, 2008; Pupo, 2009); as tools that promote a paradigm shift, both in the design process and in production and materialization (Kolarevic, 2005), allowing recycled plastic to have new applications. We started with a brief review of digital fabrication processes in Brazil, emphasizing collaboration in design and execution. Then, we contain the recycling of plastic and the need for actions for its best destination. Finally, we present a sustainable and collaborative design experience: the modeling and digital fabrication of furniture, entirely produced from recycled plastic, called “Banco Cabaça”.
keywords	Sustainable Design, Digital fabrication, Collaborative process, Parametric modeling, Brazilian design.
series	SIGraDi
email
last changed	2024/03/08 14:07

_id	ddss2008-24
id	ddss2008-24
authors	Chaabouni, S.; J.C. Bignon and G. Halin
year	2008
title	Luminous ambience designNavigation and reasoning by photographic images forformulation of intentions
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	In order to assist daylight ambience design by referential procedures, we propose in this article an analysis of the modalities of reference activity in the field of architectural design. We have identified three different activities: selecting a potential reference, projection of the reference in the project, integration of the reference into the project, allowing intentions formulation. We have used the results of this analysis to propose navigation modes adapted to an exploitation of image references in design, in order to develop a tool supporting the formulation of luminous ambience intention. The purpose here is to inform on exploratory progress more than to communicate attested results.
keywords	Luminous ambience, Design, Reasoning, References, Navigation, intentions formulation
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-33
id	ddss2008-33
authors	Charlton, James A.; Bob Giddings and Margaret Horne
year	2008
title	A survey of computer software for the urban designprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Urban design is concerned with the shape, the surface and the physical arrangement of all kinds of urban elements, the basic components that make up the built environment, at the level of buildings, spaces and human activities. It is also concerned with the non-visual aspects of the environment, such as noise, wind and temperature and humidity. The city square is a particular urban element which can take many forms and its geometrical relationships such as maximum dimensions, ratio of width to length and building height to length have been analysed for centuries (Alberti 1475), (Vitruvius 1550), (Sitte 1889), (Corbett 2004). Within the current urban design process there are increasing examples of three dimensional computer representations which allow the user to experience a visual sense of the geometry of city squares in an urban landscape. Computer-aided design and Virtual Reality technologies have recently contributed to this visual assessment, but there have been limited attempts at 3D computer representations which allow the user to experience a greater sense of the urban space. This paper will describe a survey of computer tools which could support a more holistic approach to urban design and which could be used to simulate a number of urban texture and urban quality aspects. It will provide a systematic overview of currently available software that could support the simulation of building density, height, colour and style as well as conditions relating to noise, shading, heat, natural and artificial light. It will describe a methodology for the selection and filtering of appropriate computer applications and offer an initial evaluation of these tools for the analysis and representation of the three-dimensional geometry, urban texture and urban quality of city centre spaces. The paper is structured to include an introduction to the design criteria relating to city centre spaces which underpins this research. Next the systematic review of computer software will be described, and selected tools will undergo initial evaluation. Finally conclusions will be drawn and areas for future research identified.
keywords	Urban design, Software identification, 3D modelling, Pedestrian modelling, Wind modelling, Noise mapping, Thermal comfort, VR Engine
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-32
id	ddss2008-32
authors	Chiaradia, Alain; Christian Schwander, Jorge Gil, Eva Friedrich
year	2008
title	Mapping the intangible value of urban layout (i-VALUL): Developing a tool kit for the socio-economic valuation of urbanarea, for designers and decision makers
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	In this paper we present the development of a GIS tool kit for the socioeconomic valuation of urban areas towards the creation of sustainable communities, describing the project context, development process, the tool kit’s structure, its main tools and initial feedback from its use. We then present the plan for training sessions and pilot projects where the tool kit is going to be used, and conclude with the discussion of the development of a single integrated tool to be used beyond the life of the ‘i-VALUL’ project. This project was supported by the UCL led UrbanBuzz programme within which UEL is a prime partner.
keywords	Urban planning, spatial analysis, design support tools, evaluation system, GIS
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-05
id	ddss2008-05
authors	De Vries, Bauke; Yuzhong Lin and Joran Jessurun
year	2008
title	Sense-of-the-City
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Sense-of-the-City was a project that was executed in the city centre of Eindhoven using mobile phones with GPS. Ten persons carried this equipment during the working day for a period of one week. While carrying their route was traced and projected on a map that could be viewed on the internet. The citizens were asked to pictures of places of interest. These pictures are uploaded to the server and attached to the route. Later on text can be added to each picture through the website. All participants showed a high level of engagement in the project. Although the logbooks of the routes that were created on the web provided very personal insights, it was very hard to draw conclusions from these data.
keywords	Location Based Systems, Neighbourhood planning, Citizen engagement
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-47
id	ddss2008-47
authors	Den Otter, Ad F. and H.J. Pels
year	2008
title	Rivalry between the collective use of IT tools and working methods of design teams Comparison of research outcomes
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Nowadays a high variety of IT tools is available for communication purposes in design processes on individual and group level. Despite this, the exchange and sharing of design documents collectively in design and engineering teams might be limited mainly, due to habits, preferences, working methods and rivalry between the collective use of IT tools in such product development. Changes in habits and preferences for collective use of IT tools might be realized by training and management power. However, adoption of collectively to be used tools, like project websites, is depending heavenly on the attractiveness for users in daily work. Based on empirical research outcomes it is indicated that rivalry between collective used tools and differences in working methods of users might be main barriers for attractiveness of these tools in daily work. Applying a framework for analyzing and categorizing of the frequency of use of IT tools for team communication, the authors explain the appearance of rivalry between tools, limiting the effectiveness in daily work and not affecting team communication and performance. By comparison of working methods in different sectors authors explain the necessity of changes in working methods in design and engineering in the building & construction industry on organizational and inter-organizational level for successful adoption of collectively to be used IT tools in team communication.
keywords	Rivalry between IT tools, collective use, team communication, team performance, working habits, preferences, working methods, 2nd order of change
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-29
id	ddss2008-29
authors	Emanuel, Leleito; Akira Ohgai Motoya Koga Yoshimizu Gohnai
year	2008
title	Using WebGIS and Videoconferencing to SupportDistributed Concurrent Urban Planning WorkshopsA case supporting a collaborative community "Treasure MapCreation” workshop
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This study focuses on an experimental method that employs the internet, WebGIS and videoconference systems to enable gathering and sharing of information from concurrently hosted multiple distributed participatory planning workshops. The method is expected to contribute to time, effort and economic savings while enabling greater grassroots participation as well as promoting the whole participatory planning process through more efficient information collection, sharing and updating. The authors present as a case study a distributed WS supported by videoconferencing and WebGIS systems reporting on the challenges and the implications for use in supporting participatory planning from the community scale to the larger scale regional planning levels are discussed.
keywords	Citizen Participatory Planning, WebGIS, Videoconferencing, Distributed Workshops
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-18
id	ddss2008-18
authors	Fujii, Haruyuki; Hideyuki Nakashima and Masaki Suwa
year	2008
title	Types of Intelligence in Architectural Design ProcessesOn the basis of a Phenomenological and Dialectic Model ofDesign Processes
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This study aims at establishing a constructive methodology of architectural activity. This paper investigates the types of intelligence employed in the activity. The types are derived from a phenomenological and dialectic point of view. The model employs Endo-system view with which a system is observed from the inside of the system. It describes architectural activity from a cognitive point of view of the actor principle involved in the activity.
keywords	Design Science, Decision Making, Dialectical Process, Noesis and Noema
series	DDSS
last changed	2008/09/01 17:06

_id	ac21
id	ac21
authors	Giddings B, Horne M
year	2008
title	The Changing Patterns of Architectural Design Education
source	Architecture and Modern Information Technologies, Vol. 3, No. 4. ISSN-1998-4839
summary	Digital technologies have been introduced to students of architecture for over two decades and at present it could be argued that students are producing some of the highest quality designs, and some of the most interesting forms ever to come from University Schools. The value of computer aided design (CAD) is also being demonstrated in architectural practice, with high profile, large budget, bespoke and iconic buildings designed by internationally renowned architects. This paper reviews the changing patterns of architectural design education and considers the contribution digital technologies could make to buildings with more commonplace uses. The study offers a perspective on different kinds of buildings and considers the influence that emerging technologies are having on building form. It outlines digital technologies, alongside students’ application for architectural design and considers the role they could play in the future, in developing a shared architectural language. It is suggested that some of the biggest opportunities for future research will be in the design of external spaces, often a neglected part of architectural design education.
keywords	architectural design education, digital technologies
series	other
type	normal paper
email
more	http://www.marhi.ru/AMIT
last changed	2008/11/02 20:38

_id	ddss2008-11
id	ddss2008-11
authors	Gohnai, Y.; A. Ohgai and K. Watanabe
year	2008
title	A simulation model development of firefightingactivity by community residents against coseismic firespread using multi-agent systemAs a support tool for community-based disaster preventionplanning
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper attempted to develop a simulation model of residents’ firefighting activity against coseismic fire spread using multi-agent system. The developed model was applied to a case study area. In the application, the simulations were carried out to the existing area and eleven cases of the assumption (virtual conditions) of the area where are implemented various non-physical and physical measures. As a result, the measures with only physical and haphazard multitude of measures did not show a remarked effect of disaster prevention performance. And, it is confirmed that the model can visually, dynamically and quantitatively output results. From these outputs, the possibility of contribution for enhancing residents’ awareness and drafting a plan of disaster prevention was confirmed. However, there are still some problems to be solved for the practical use of the model.
keywords	Community-based Planning for Disaster Prevention, Planning Support System, Fire Spread Simulation, Firefighting simulation, Multi-agent system, Cellular Automata
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	82b1
id	82b1
authors	Greenwood D, Horne M, Thompson E M, Allwood C M, Wernemyr C, Westerdahl B.
year	2008
title	Strategic Perspectives of the Use of Virtual Reality within the Building Industries of Four Countries.
source	International Journal of Architectural Engineering and Design Management
summary	This paper presents results from the first stage of an analysis of the use of virtual reality (VR) within the building industries of strategically selected countries, namely, China, Sweden, the UK and the US. The aims of the research are to assess VR usage and its benefits within the building industries of these countries and to identify perceived barriers to VR usage and ways of overcoming them. The countries selected offer a range of experience in the adoption of VR technologies and the paper provides an initial analysis of developments at an international level. Semi-structured interviews were conducted with senior professionals from each of six leading construction companies within each country. The findings included the rationale for the adoption of VR and the barriers to doing so, as well as some divergence between the respondents in their working definition of what visualization and, specifically, VR actually represents.
keywords	Building industry; implementation strategy;international perspectives; interview survey; virtual reality
series	other
type	normal paper
email
last changed	2008/11/26 16:54

_id	acadia08_208
id	acadia08_208
authors	Griffiths, Jason
year	2008
title	Man + Water + Fan = Freshman: Natural Process of Evaporative Cooling and the Digital Fabrication of the ASU Outdoor Dining Pavilion
doi	https://doi.org/10.52842/conf.acadia.2008.208
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 208-213
summary	To the east of Johnson City TX is the Lyndon B. Johnson’s family home. Part of the Johnson Estate2 is given over to a working farm circa 1870 that presents various aspects of domestic practice from the era. This includes a desert fridge which is a simple four-legged structure with a slightly battered profile that’s draped in calico. Its principle is simple; water from an upturned jar is drawn by osmosis down the sides of the calico where it evaporates in wind currents drawn though a “dog run” between two log cabins. Cooled air circulates within the structure and where cheese and milk are kept fresh during the summer. The desert fridge is a simple system that reaches a state of equilibrium through the natural process of evaporation. ¶ This system provides a working model for a prototype structure for an outdoor dining pavilion that was designed and constructed on the campus of Arizona State University. The desert fridge is the basis for a “biological process”3 of evaporative cooling that has been interpreted in terms a ritual of outdoor dining in arid climates. The pavilion is intended as a gathering point and a place of interaction for ASU freshmen. The long-term aim of this project is to provide a multiple of these pavilions across the campus that will be the locus of a sequence of dining events over a “dining season”4 during the fall and spring semester. ; This paper describes how the desert fridge principle has been interpreted in the program and construction of the dining pavilion. It explores a sequence of levels by which the structure, via digital production process, provides an educational narrative on sustainability. This communicative quality is portrayed by the building in direct biological terms, through tacit knowledge, perceived phenomena, lexical and mechanical systems. The paper also describes how these digital production process were used in the building’s design and fabrication. These range from an empirical prognosis of evaporative cooling effects, fluid dynamics, heat mapping and solar radiation analysis through to sheet steel laser cutting, folded plate construction and fully associative variable models of standard steel construction. The aim of the pavilion is to create an environment that presents the evaporative cooling message at a multiple of levels that will concentrate the visitor in holistic understanding of the processes imbued within the building.5
keywords	Communication; Digital Fabrication; Environment; System
series	ACADIA
last changed	2022/06/07 07:51

_id	ddss2008-06
id	ddss2008-06
authors	Hagen-Zanker, Alex
year	2008
title	Sensititivity analysis of a cellular automata land usemodel through multiple metrics of goodness-of-fit
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	The complexity and self-organizing behaviour of Cellular Automata models makes them attractive instruments for investigating urban change processes. That same complexity, however, obscures the relation between model parameters and model results and poses problems for the calibration of the models as well as the interpretation of results. This paper introduces an approach to sensitivity analysis that untangles much of the complex relation between parameters and outputs. The key of the approach is to find compartments in parameter space on the basis of the relation between multiple metrics of goodness-of-fit. Within individual compartments the relation between parameters and model outputs is less chaotic and open for investigation by more traditional means. The method offers prospects for model calibration and parameter reduction; further steps in these directions are outlined and discussed.
keywords	Cellular automata, land use, sensitivity, goodness-of-fit, map comparison
series	DDSS
last changed	2008/09/01 17:06

_id	caadria2008_44_session4b_357
id	caadria2008_44_session4b_357
authors	Ham, Jeremy
year	2008
title	Developing The a+b/online Virtual Gallery
doi	https://doi.org/10.52842/conf.caadria.2008.357
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 357-363
summary	The a+b/online project is an exemplar of a comprehensive online resource that includes Virtual Galleries, resources, digital case studies and an image repository (http://www.ab.deakin.edu.au/online). Throughout its development since 2001, the project has expanded to include several thousand digital objects. This paper discusses the development of the a+b/online site and outlines some of the issues associated with its development. The current state of the project is discussed in relation to the current paradigm of citizen media including blogs.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ddss2008-30
id	ddss2008-30
authors	Hemmerling, Marco
year	2008
title	Digital MaterialPerception, Interaction and Immersion in Virtual Environments
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper outlines two major aspects of virtual environments for architectural design. On the one hand it focusses on how to use virtual reality as an extended tool to generate spatial design by building up and interacting with a three-dimensional digital model. On the other hand it describes - based on a case study - the relation between perception, interaction and immersion in virtual environments. Both approaches can be interconnected to a continues design process, that allows the designer to create, manipulate, visualize and decide on spatial concepts in a holistic three-dimensional simulation.
keywords	Virtual Environment, Digital Architecture, Immersion, Perception, Human-Computer Interaction
series	DDSS
last changed	2008/09/01 17:06

For more results click below: