Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1131

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2020_167
id	ecaade2020_167
authors	Newton, David, Piatkowski, Dan, Marshall, Wesley and Tendle, Atharva
year	2020
title	Deep Learning Methods for Urban Analysis and Health Estimation of Obesity
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 297-304
doi	https://doi.org/10.52842/conf.ecaade.2020.1.297
summary	In the 20th and 21st centuries, urban populations have increased dramatically with a whole host of impacts to human health that remain unknown. Research has shown significant correlations between design features in the built environment and human health, but this research has remained limited. A better understanding of this relationship could allow urban planners and architects to design healthier cities and buildings for an increasingly urbanized population. This research addresses this problem by using discriminative deep learning in combination with satellite imagery of census tracts to estimate rates of obesity. Data from the California Health Interview Survey is used to train a Convolutional Neural Network that uses satellite imagery of selected census tracts to estimate rates of obesity. This research contributes knowledge on methods for applying deep learning to urban health estimation, as well as, methods for identifying correlations between urban morphology and human health.
keywords	Deep Learning; Artificial Intelligence; Urban Planning; Health; Remote Sensing
series	eCAADe
email
last changed	2022/06/07 07:58

_id	caadria2008_9_session1b_075
id	caadria2008_9_session1b_075
authors	Chien, Sheng-Fen
year	2008
title	Probing elders’ needs for smart technologies in the domestic environment
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 75-80
doi	https://doi.org/10.52842/conf.caadria.2008.075
summary	This paper presents an initial investigation into developing smart homes for the elderly. Smart homes refer to domestic living environments that equipped with “sensible” and “responsive” facilities, which employ smart technologies, to provide occupants a sound and comfortable living. Designers and sociologists have observed reluctances and even rejections to these technologies from the elderly. A Cultural Probes study shows that the elderly welcome new technologies but reject robotic companionships. In addition, a questionnaire survey concludes that smart technologies for home safety and security, energy conservation and usage monitoring, as well as health care and maintenance, are desirable.
keywords	Smart home; the elderly; cultural probe; questionnaire; survey
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	82b1
id	82b1
authors	Greenwood D, Horne M, Thompson E M, Allwood C M, Wernemyr C, Westerdahl B.
year	2008
title	Strategic Perspectives of the Use of Virtual Reality within the Building Industries of Four Countries.
source	International Journal of Architectural Engineering and Design Management
summary	This paper presents results from the first stage of an analysis of the use of virtual reality (VR) within the building industries of strategically selected countries, namely, China, Sweden, the UK and the US. The aims of the research are to assess VR usage and its benefits within the building industries of these countries and to identify perceived barriers to VR usage and ways of overcoming them. The countries selected offer a range of experience in the adoption of VR technologies and the paper provides an initial analysis of developments at an international level. Semi-structured interviews were conducted with senior professionals from each of six leading construction companies within each country. The findings included the rationale for the adoption of VR and the barriers to doing so, as well as some divergence between the respondents in their working definition of what visualization and, specifically, VR actually represents.
keywords	Building industry; implementation strategy;international perspectives; interview survey; virtual reality
series	other
type	normal paper
email
last changed	2008/11/26 16:54

_id	ddss2008-21
id	ddss2008-21
authors	Horeni, Oliver; T.A. Arentze, H.J.P. Timmermans, and B.G.C. Dellaert
year	2008
title	INTERVIEW TECHNIQUES FOR MEASURINGINDIVIDUALS’ MENTAL REPRESENTATIONSSPACE-TIME CHOICESAn outline of three IT-based survey methods
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	A better exploration of human decision making is a necessary condition to understand individual activity-travel choices. With the advent of mental model theory a conceptual framework of individuals’ causal knowledge of the environment and its links to the behavioural choice outcome was available. Accordingly, interview techniques had been developed in order to elicit mental representations from individuals’ mind. Although these techniques delivered reliable and useful results, it turned out quickly, that they could not be applied to large-scale surveys. Hence, this paper will report on the development of three IT-based interview techniques, which are promising avenues to measure mental representations in an efficient and flexible way.
keywords	Activity-travel choice, Mental representations, Electronic surveying
series	DDSS
last changed	2008/09/01 17:06

_id	ecaade2009_123
id	ecaade2009_123
authors	Achten, Henri; Beetz, Jakob
year	2009
title	What Happened to Collaborative Design?
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 357-366
doi	https://doi.org/10.52842/conf.ecaade.2009.357
wos	WOS:000334282200043
summary	In this paper we present the results of a comprehensive literature survey on the development of collaborative design. We reviewed 324 papers on collaborative design, taken from various sources (conferences, journals, and PhD-theses). We grouped the papers based on common themes, and in that way derived a classification of themes through the last 25 years (1983-2008). Each category is described, its development, and key publications are identified.
keywords	Collaborative design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2008_42_session4b_343
id	caadria2008_42_session4b_343
authors	Barrios, Carlos; Damien Alomar
year	2008
title	Computing with textile blocks: Symmetry Studies on Frank Lloyd Wright’s Textile Block Design Patterns
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 343-349
doi	https://doi.org/10.52842/conf.caadria.2008.343
summary	This research focused on generating alternative designs from the textile blocks California Houses of Frank Lloyd Wright based on regular wallpaper symmetry patterns. A computational framework was developed that generates the designs of the original textile blocks in combination with all possible wallpaper symmetry patterns. This computational framework allowed for the creation of the catalog of possible regular patterns. The development of the framework allowed for a deeper understanding of the symmetrical relationships of the blocks and the wallpaper patterns created by Frank Lloyd Wright and a large collection of new ones.
keywords	Symmetry Studies, Design Patterns, Blocks Computation, Frank Lloyd Wright, Textile Blocks
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2008_81_session7b_662
id	caadria2008_81_session7b_662
authors	Champion, Erik; Andrew Dekker, Petra Thomas
year	2008
title	Lazy Panorama Monopoly Table: Take Your City for a Spin
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 662-669
doi	https://doi.org/10.52842/conf.caadria.2008.662x.u7o
summary	While conventional information displays are still effective, a lack of integration between descriptive and contextual information means they cannot be used independently of additional external information. New digital systems such as Google Maps are increasing in popularity. Unfortunately these present some limitations in terms of understanding both route and survey information, and in particular navigation and orientation, such as intuitively understanding a plan view no matter which way one is facing, so visitors can quickly and intuitively learn how to get to specific buildings or to specific facilities. Digital systems may also alienate older and non computer literate users; and they display contextual information inside an interface which limits the possible range of interaction methods offered by physical interaction. Our solution was to create a 3D physical model that one could spin, which would in turn display digital panoramas that spun in rotational alignment with the physical city model. Further, the user could place category tokens in intersections of the city model, which would bring up digital panoramas on the screen and highlight facilities linked to the category chosen. Rotating the token would also rotate the digital panorama.
keywords	Urban visualization, panorama, tangible user interface, phidgets
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	ddss2008-33
id	ddss2008-33
authors	Charlton, James A.; Bob Giddings and Margaret Horne
year	2008
title	A survey of computer software for the urban designprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Urban design is concerned with the shape, the surface and the physical arrangement of all kinds of urban elements, the basic components that make up the built environment, at the level of buildings, spaces and human activities. It is also concerned with the non-visual aspects of the environment, such as noise, wind and temperature and humidity. The city square is a particular urban element which can take many forms and its geometrical relationships such as maximum dimensions, ratio of width to length and building height to length have been analysed for centuries (Alberti 1475), (Vitruvius 1550), (Sitte 1889), (Corbett 2004). Within the current urban design process there are increasing examples of three dimensional computer representations which allow the user to experience a visual sense of the geometry of city squares in an urban landscape. Computer-aided design and Virtual Reality technologies have recently contributed to this visual assessment, but there have been limited attempts at 3D computer representations which allow the user to experience a greater sense of the urban space. This paper will describe a survey of computer tools which could support a more holistic approach to urban design and which could be used to simulate a number of urban texture and urban quality aspects. It will provide a systematic overview of currently available software that could support the simulation of building density, height, colour and style as well as conditions relating to noise, shading, heat, natural and artificial light. It will describe a methodology for the selection and filtering of appropriate computer applications and offer an initial evaluation of these tools for the analysis and representation of the three-dimensional geometry, urban texture and urban quality of city centre spaces. The paper is structured to include an introduction to the design criteria relating to city centre spaces which underpins this research. Next the systematic review of computer software will be described, and selected tools will undergo initial evaluation. Finally conclusions will be drawn and areas for future research identified.
keywords	Urban design, Software identification, 3D modelling, Pedestrian modelling, Wind modelling, Noise mapping, Thermal comfort, VR Engine
series	DDSS
last changed	2008/09/01 17:06

_id	sigradi2008_012
id	sigradi2008_012
authors	Dokonal, Wolfgang
year	2008
title	What is the state of digital architectural design?
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	What is the state of digital architectural design? The ubiquity of the computer in architecture can be seen in the many computer based presentations from famous architectural practices. BIM (Building Information Modelling) is the key word and we can see implementations in very ambitious projects all over the world. Glossy magazines show the results of this kind of architecture and predict that this is the future of our profession. But when we go out into the “small world” (in Europe) and talk with architects in small firms, there is a very different reality – at least at the moment. Although they all agree that the computer is crucial for their work, it is a love/hate relationship for many them. Most still use the computer purely as a drafting device and AutoCAD is still the dominant tool. Although many of them agree with the statement that you can use the computer for design, only a minority really use the computer as a design tool in the early design stages. To find out more about the reality of the use of computers in design in “small town Europe” we have been undertaking two different kinds of research over the past 4 years. The first one is an educational experiment using first year’s students to find out about the different qualities of designing with and without the computer. The results have been presented at previous conferences and, since we are doing a last run of these experiments this year, we will update and finalise our findings in this paper. To make it comparable to previous years, we use largely the same settings using the same type of student (first year) and the same project/site. We will also be comparing the results for students designing ‘freestyle’ ie in the way that they want against the previous years controlled groups. The second strand of research we have followed is a survey amongst practitioners and some of the above statements came out of this survey. We did this survey using a web questionnaire and focused on a particular region of Europe. Although the numbers of participants for this survey were quite satisfying we are re-running the survey in a different region and country to see whether there are significant differences. The results of our research and our experience as teachers and architects leads us to the main question of how we can give recommendations on how to teach design the new generation of architects. In many aspects most of the teaching that is done in our faculties is still strictly divided into teaching design and teaching computer skills. The crucial question for architectural education are the implications of the ubiquity of the computer will have especially in the field of design. We will try to give some suggestions for these effects this could have on our teaching. In the long run, this is the only way to avoid some of the pitfalls and bring the benefits of computers in design to our small architectural firms. The paper will present a summary of the results of our research and try to propose an answer to the question: “What is the state of digital design in small town Europe?”
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ecaade2008_086
id	ecaade2008_086
authors	Elsen, Catherine; Juchmes, Roland; Kubicki, Sylvain; Leclercq, Pierre
year	2008
title	DCDS – Distant Collaborative Design Studio
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 325-332
doi	https://doi.org/10.52842/conf.ecaade.2008.325
summary	This paper introduces new supporting tools in the field of distant collaborative design, namely DCDS and CRTI-weB. These prototypes respectively support: the early stages of design, through the support of the crucial initial step of free-hand sketches shared in real-time, and the asynchronous collaborative activities. The main goal of this paper is to propose the use of these innovative tools as an efficient and realistic way of managing long distance collaboration, to effectively serve the designers’ needs. This proposition is analyzed and addressed through a real-size experiment featuring 30 architecture and architectural-engineering students, working together in real-time at different locations (Belgium and France). This experiment and the necessary survey open up interesting fields of investigation, such as the relevance of the proposed services in supporting distant collaborative design in architecture and the benefit this represents for students to merge the IT aspects and the design studio. The methodology and the replicability are analyzed to increase the level and quality of formation of our students and, finally, a criticism of the tools confirms a benefit for the developing teams.
keywords	Distant collaborative design, sketch support systems, asynchronous collaborative activities
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2015_265
id	ecaade2015_265
authors	Hosey, Shannon; Beorkrem, Christopher, Damiano, Ashley, Lopez, Rafael and McCall, Marlena
year	2015
title	Digital Design for Disassembly
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 371-382
doi	https://doi.org/10.52842/conf.ecaade.2015.2.371
wos	WOS:000372316000043
summary	The construction and building sector is now widely known to be one of the biggest energy consumers, carbon emitters, and creators of waste. Some architectural agendas for sustainability focus on energy efficiency of buildings that minimize their energy intake during their lifetime - through the use of more efficient mechanical systems or more insulative wall systems. One issue with these sustainability models is that they often ignore the hierarchy of energy within architectural design. The focus on the efficiency is but one aspect or system of the building assembly, when compared to the effectiveness of the whole, which often leads to ad-hoc ecology and results in the all too familiar “law of unintended consequences” (Merton, 1936). As soon as adhesive is used to connect two materials, a piece of trash is created. If designers treat material as energy, and want to use energy responsibly, they can prolong the lifetime of building material by designing for disassembly. By changing the nature of the physical relationship between materials, buildings can be reconfigured and repurposed all the while keeping materials out of a landfill. The use of smart joinery to create building assemblies which can be disassembled, has a milieu of new possibilities created through the use of digital manufacturing equipment. These tools afford designers and manufacturers the ability to create individual joints of a variety of types, which perform as well or better than conventional systems. The concept of design for disassembly is a recognizable goal of industrial design and manufacturing, but for Architecture it remains a novel approach. A classic example is Kieran Timberlake's Loblolly House, which employed material assemblies “that are detailed for on-site assembly as well as future disassembly and redeployment” (Flat, Inc, 2008). The use of nearly ubiquitous digital manufacturing tools helps designers create highly functional, precise and effective methods of connection which afford a building to be taken apart and reused or reassembled into alternative configurations or for alternative uses. This paper will survey alternative energy strategies made available through joinery using digital manufacturing and design methods, and will evaluate these strategies in their ability to create diassemblable materials which therefore use less energy - or minimize the entropy of energy over the life-cycle of the material.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=4075520a-6fe7-11e5-bcc8-f7d564ea25ed
last changed	2022/06/07 07:50

_id	ecaade2008_101
id	ecaade2008_101
authors	Jabi, Wassim; Hall, Theodore; Passerini, Katia; Borcea, Cristian; Jones, Quentin
year	2008
title	Exporting the Studio Model of Learning
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 509-516
doi	https://doi.org/10.52842/conf.ecaade.2008.509
summary	We have conducted a series of interdisciplinary studios that partner students in the School of Architecture with peers in the College of Computing Sciences, with two principal goals: to foster creativity in the development of information technology, and conversely, to support creativity through information technology. Our studio project focuses on ubiquitous social computing as a topic of interest to both communities that requires their collaboration to realize a physical implementation. There are administrative as well as cultural hurdles in conducting such a studio. To assess the impact of the pedagogical approach, we employed qualitative observations as well as quantitative survey data. Best results depend on achieving a degree of parity in studio experience across disciplines.
keywords	interdisciplinary design studio, ubiquitous social computing, computer supported collaborative work, human computer interaction
series	eCAADe
email
last changed	2022/06/07 07:52

_id	8d4d
id	8d4d
authors	Leymarie F, Derix C, Miranda P, Coates P, Calderon C
year	2008
title	Medial Representations for driving the Architectural Creative Process
source	International Architecture Symposium, Barcelona, April 2008
summary	Medial representations of shape provide a powerful framework for the analysis and genesis of architectural forms,layouts, landscapes, cityscapes. In this paper we explore their potential use in driving the architectural creative process for 2D and 3D applications. We consider both the aspects of (i) the analysis of exisiting architectural layouts, and (ii) the genesis of novel ones. The archetypal medial representation of shape is the “medial axis” of Harry Blum (circa 1960). Boundary elements, the outline samples of the objects of interest, are used as the source of a wavefront propagation, for which the quenching points constitute axial symmetries. In 2D layout applications the resulting medial axis (MA) takes the form of a graph which unites geometry and topology of the objects and the field they occupy in one single framework. In the following we first survey the topic of shape representation via medial structures and consider their specific use in architectural analysis and genesis. We then report of early works in extending such ideas for novel applications relevant to architecture.
keywords	medial axis, spatial representation, user perception, occupancy
series	book
type	normal paper
email
last changed	2012/09/20 22:05

_id	caadria2008_66_session6b_544
id	caadria2008_66_session6b_544
authors	Lowe, Russell
year	2008
title	Beyond the boundary object: sketches, computer games and blogs facilitating design development
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 544-551
doi	https://doi.org/10.52842/conf.caadria.2008.544
summary	Developing Frosts’ understanding of Leigh Star’s (Star 1989) concept of the boundary object this paper seeks to answer the question “would multiple boundary objects employed simultaneously facilitate design development?” The paper reflects on and critically reviews the design, implementation, and outcomes of a first year Architectural Design course that privileged architectural representation in the form of design sketches, blogs and contemporary computer gaming technology. The review process is supported by an in depth survey of students experiences both prior to and during the course. With a large number of students enrolled in the course (158) the findings from this survey can be seen to offer a statistical reliability which is in contrast to the more usual anecdotal approach.
keywords	Boundary Object, Generalist, Specialist, Sketch, Computer Game, Blog
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2008_000
id	caadria2008_000
authors	Nakapan, Walaiporn; Ekkachai Mahaek, Komson Teeraparbwong, Piyaboon Nilkaew (Eds.)
year	2008
title	CAADRIA 2008: Beyond Computer-Aided Design
source	Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia (ISBN 978-974-672-290-2/ Chiang Mai, Thailand) 9-12 April 2008, 669 p.
doi	https://doi.org/10.52842/conf.caadria.2008
summary	In the Twenty-First Century, advanced digital technologies play a significant role in almost every aspect of our life. Many believe we are living in parallel space between the physical and the so-called ‘Digital World’ where alternative visualization and simulation seamlessly bridge these worlds. Many argue that advanced digital technologies improve human living condition as in the case of architectural design through the use of computer-generation can predict an outcome of better built environments. In cases of health, digital imaging tools improve the ability to diagnose and treat illness while in cases of entertainment, creates more visually stimulating effects. Yet, it provokes us to rethink aspects of culture and sense of belonging as well as to question the way we perceive, conceive, and represent the world we are living in.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
doi	https://doi.org/10.52842/conf.acadia.2016.140
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	af5a
id	af5a
authors	Schnabel, Marc Aurel; Howe, Evelyn
year	2008
title	Action-based interprofessional learning and teaching: communication and consultancy skills for architecture
source	Innovation, Inspiration and Instruction: New Knowledge in the Architectural Sciences, 42nd Annual Conference of the Australian and New Zealand Architectural Science Association, ANZAScA 2008, Newcastle, Australia, 26-28 November 2008, pp. 93-98
summary	The interprofessional Dentistry/Design-Project is an innovative method of teaching students the skills required for successful promotion of communication and consultancy in a public realm. It aims to enable students to develop evidence-based consultancy appropriate for a target audience. The paper presents the method and outcomes of thirty student groups that successfully developed an oral health promotion program of suitable quality for publication as evaluated by the two teaching faculties. The student groups were unanimous in their evaluation of the program as a valuable learning experience. The conclusion discusses how the interprofessional learning project is successful in enabling architectural students to understand and use communication and consultancy skills effectively for collaboration across disciplines and faculties.
keywords	interprofessional teaching, communication skills, consultancy skills
series	other
type	normal paper
email
last changed	2009/05/11 08:50

_id	caadria2008_70_session7a_579
id	caadria2008_70_session7a_579
authors	Tan, Beng-Kiang; Daniel Jun Chung Hii
year	2008
title	The Acceptable Visual Quality of Stereoscopic Virtual Reality Architectural Visualisation
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 579-586
doi	https://doi.org/10.52842/conf.caadria.2008.579
summary	The realism of VR visualisation is diminished when images look pixelated or forms are faceted instead of smooth. What constitutes acceptable visual quality by viewers? This paper presents the survey results of what is the acceptable visual quality of triangle complexity and texture resolution for full-size VR visualisation on a large screen and serves as a guide to create VR models more efficiently.
keywords	Virtual Reality, Stereoscopic, Visualisation, User perception
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2008_30_session3b_244
id	caadria2008_30_session3b_244
authors	Tayyar, Bahram
year	2008
title	Impacts of ITC technologies on Neighborhoods: Typological Study
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 244-250
doi	https://doi.org/10.52842/conf.caadria.2008.244
summary	As the former infrastructures such as roads and electricity deeply transformed qualities of neighbourhoods, the new ITC technologies exert some fundamental changes over them. This paper, which is based on a master by research thesis, explores the newly emerging ITC-based lifestyles to understand the social and spatial impacts that they are seeking or may cause in their living environments. The study is typological and emphasizes on similarities and differences between different neighbourhood types (as physical contexts) and lifestyles (as human contexts).
keywords	ITC-based lifestyles, Interview, Neighbourhood Qualities, Qualitative and Quantitative
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	sigradi2022_112
id	sigradi2022_112
authors	Toledo, Jimena
year	2022
title	The Role of Visual Platforms -visual Social Media- in the Creative Design Process
source	Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 639–650
summary	In the current design practice, new digital tools have emerged -visual- also called Infrastructures (Perkel, 2011) such as; Behance 2003, Pinterest 2009, Archdaily 2008, Instagram (2010) -to cite the most recognized in the creative field in Argentina-, which promote different opportunities and support the creative process and problem solving, making it easier for designers to find inspiring material through the Internet. However, very little is known about how these new practices affect professional work, how they themselves see it and the tensions they generate.This article will present the results of a general survey applied to expert designers as part of the first stage of the Doctoral Research project. Which investigates the behavior referred specifically to the use of visual platforms -visual social media- in order to understand, characterize, describe the use and involvement of them within the design process.
keywords	Project processes - Creativity - Design process - Visual Social Media -Curatorial Practice
series	SIGraDi
email
last changed	2023/05/16 16:56

For more results click below: