Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 6058

Reformat results as: short short into frame detailed detailed into frame

_id	ijac20076106
id	ijac20076106
authors	Donath, Dirk; Bohme, Luis Felipe Gonzalez
year	2008
title	Constraint-Based Design in Participatory Housing Planning
source	International Journal of Architectural Computing vol. 6 - no. 1, pp. 97-117
summary	We introduce some novel ideas for a constraint-based design strategy to support participatory housing planning processes in Latin America. The following lines intend to open the discussion on the requirements and effect of the computer implementation of a constraint satisfaction approach to solve elementary design problems in architectural practice. The case study applies to the building massing design problem posed by the Chilean urban regulatory framework that addresses single-family affordable houses. Two different implementation criteria are being tested in an ongoing series of trials providing further considerations. One prototype uses MAXON's CINEMA4D XPRESSO® visual scripting environment to set up a semi-automated design environment which allows users to edit one feature-based 3D model of massing alternative at a time. The other prototype uses ILOG's OPL STUDIO® constraint programming environment to achieve fully automated search and 2D visualization of all possible solution alternatives to separate subdomains of the building massing design problem.
series	journal
last changed	2008/06/18 08:12

_id	ecaade2008_030
id	ecaade2008_030
authors	Donath, Dirk; Lobos, Danny
year	2008
title	Massing Study Support
doi	https://doi.org/10.52842/conf.ecaade.2008.101
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 101-108
summary	Since Hugh Ferris in 1922 started with a series of massing studies the visualization of zoning planning began to be a topic for architects. Setbacks, plot area ratio, maximum building height, and other important attributes must be handled by the architect to fulfill the law, the needs of the clients and his own inspiration. This paper presents the problem of envelope design for high-rise isolated housing buildings, as well as a new Decision Support Systems tool based on the platform of a BIM software, that allows to simulate several options for building envelope according to the parameters required by the city Zoning Planning. These options deliver reliable data and geometry, to be analyzed in real time for the architects, engineers, builders, government and the client in the early stages of the building’s design.
keywords	Constraint Based Design, Parametric Programming, Urban Modeling, Optimization, Architectural Design
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ddss2008-09
id	ddss2008-09
authors	Bates-Brkljac, N.
year	2008
title	Towards client-focused architectural representationsas a facilitator for improved design decision-makingprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper focuses on architectural representations as a means of communicating design schemes in the process of decision-making. It reports on the study, which investigated people’s responses to different forms of architectural representations. The paper starts with the discussion about participation in decision-making process and the potential benefits of using computer generated representations. Then, it describes the research study and examines results of the investigation. In the final section it is argued that client focused architectural representations are needed to support the exchange of views and discussion amongst different stakeholders in order to reduce the requirement for trained interpretation and encourage the participation in the decision making process.
keywords	Architectural representations, Perceived credibility, Design decision making
series	DDSS
last changed	2008/09/01 17:06

_id	ecaade2008_123
id	ecaade2008_123
authors	Cenani, Sehnaz; Ça_da_, Gülen
year	2008
title	Agent-Based System for Modeling User Behavior in Shopping Malls
doi	https://doi.org/10.52842/conf.ecaade.2008.635
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 635-642
summary	Agent-based systems are being used as decision support systems for solving architectural design problems. Usually in design phase, user behavior is ignored by the designers. Therefore, after the construction, the users face difficulties in emergency situations and in daily usage. As a result, buildings become insufficient to respond to users’ needs and design goals of the building itself. Before construction, ability of testing the interactions between the building and its users is particularly important to solve the problems in early phases of the design. Hence, to design a building that functions better in certain situations and time loss decreases in the design process. For these reasons, the aim of this study is to develop a model to simulate users in shopping malls.
keywords	User behavior, decision support systems, agent-based systems, simulation, shopping malls
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ddss2008-29
id	ddss2008-29
authors	Emanuel, Leleito; Akira Ohgai Motoya Koga Yoshimizu Gohnai
year	2008
title	Using WebGIS and Videoconferencing to SupportDistributed Concurrent Urban Planning WorkshopsA case supporting a collaborative community "Treasure MapCreation” workshop
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This study focuses on an experimental method that employs the internet, WebGIS and videoconference systems to enable gathering and sharing of information from concurrently hosted multiple distributed participatory planning workshops. The method is expected to contribute to time, effort and economic savings while enabling greater grassroots participation as well as promoting the whole participatory planning process through more efficient information collection, sharing and updating. The authors present as a case study a distributed WS supported by videoconferencing and WebGIS systems reporting on the challenges and the implications for use in supporting participatory planning from the community scale to the larger scale regional planning levels are discussed.
keywords	Citizen Participatory Planning, WebGIS, Videoconferencing, Distributed Workshops
series	DDSS
last changed	2008/09/01 17:06

_id	46d4
id	46d4
authors	Fischer, Thomas
year	2008
title	Designing (tools (for designing (tools for ...))))
source	RMIT University, Melbourne
summary	Outcomes of innovative designing are frequently described as enabling us in achieving more desirable futures. How can we design and innovate so as to enable future processes of design and innovation? To investigate this question, this thesis probes the conditions, possibilities and limitations of toolmaking for novelty and knowledge generation, or in other words, it examines designing for designing. The focus of this thesis is on the development of digital design tools that support the reconciliation of conflicting criteria centred on architectural geometry. Of particular interest are the roles of methodological approaches and of biological analogies as guides in toolmaking for design, as well as the possibility of generalising design tools beyond the contexts from which they originate. The presented investigation consists of an applied toolmaking study and a subsequent reflective analysis using second- order cybernetics as a theoretical framework. Observations made during the toolmaking study suggest that biological analogies can, in informal ways, inspire designing, including the designing of design tools. Design tools seem to enable the generation of novelty and knowledge beyond the contexts in and for which they are developed only if their users apply them in ways unanticipated by the toolmaker. Abstract The reflective analysis offers theoretical explanations for these observations based on aspects of second-order cybernetics. These aspects include the modelling of designing as a conversation, different relationships between observers (such as designers) and systems (such as designers engaged in their projects), the distinction between coded and uncoded knowledge, as well as processes underlying the production and the restriction of meaning. Initially aimed at the development of generally applicable, prescriptive digital tools for designing, the presented work results in a personal descriptive model of novelty and knowledge generation in science and design. This shift indicates a perspective change from a positivist to a relativist outlook on designing, which was accomplished over the course of the study. Investigating theory and practice of designing and of science, this study establishes an epistemological model of designing that accommodates and extends a number of theoretical concepts others have previously proposed. According to this model, both design and science generate and encode new knowledge through conversational processes, in which open-minded perception appears to be of greater innovative power than efforts to exercise control. The presented work substantiates and exemplifies radical constructivist theory of knowledge and novelty production, establishes correspondences between systems theory and design research theory and implies that mainstream scientific theories and practices are insufficient to account for and to guide innovation.
keywords	Digital design tools, geometry rationalisation, second-order cybernetics, knowledge generation
series	thesis:PhD
type	normal paper
email
more	http://adt.lib.rmit.edu.au/adt/public/adt-VIT20080424.160537/index.html
last changed	2008/05/10 08:31

_id	ddss2008-18
id	ddss2008-18
authors	Fujii, Haruyuki; Hideyuki Nakashima and Masaki Suwa
year	2008
title	Types of Intelligence in Architectural Design ProcessesOn the basis of a Phenomenological and Dialectic Model ofDesign Processes
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This study aims at establishing a constructive methodology of architectural activity. This paper investigates the types of intelligence employed in the activity. The types are derived from a phenomenological and dialectic point of view. The model employs Endo-system view with which a system is observed from the inside of the system. It describes architectural activity from a cognitive point of view of the actor principle involved in the activity.
keywords	Design Science, Decision Making, Dialectical Process, Noesis and Noema
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-11
id	ddss2008-11
authors	Gohnai, Y.; A. Ohgai and K. Watanabe
year	2008
title	A simulation model development of firefightingactivity by community residents against coseismic firespread using multi-agent systemAs a support tool for community-based disaster preventionplanning
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper attempted to develop a simulation model of residents’ firefighting activity against coseismic fire spread using multi-agent system. The developed model was applied to a case study area. In the application, the simulations were carried out to the existing area and eleven cases of the assumption (virtual conditions) of the area where are implemented various non-physical and physical measures. As a result, the measures with only physical and haphazard multitude of measures did not show a remarked effect of disaster prevention performance. And, it is confirmed that the model can visually, dynamically and quantitatively output results. From these outputs, the possibility of contribution for enhancing residents’ awareness and drafting a plan of disaster prevention was confirmed. However, there are still some problems to be solved for the practical use of the model.
keywords	Community-based Planning for Disaster Prevention, Planning Support System, Fire Spread Simulation, Firefighting simulation, Multi-agent system, Cellular Automata
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-30
id	ddss2008-30
authors	Hemmerling, Marco
year	2008
title	Digital MaterialPerception, Interaction and Immersion in Virtual Environments
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper outlines two major aspects of virtual environments for architectural design. On the one hand it focusses on how to use virtual reality as an extended tool to generate spatial design by building up and interacting with a three-dimensional digital model. On the other hand it describes - based on a case study - the relation between perception, interaction and immersion in virtual environments. Both approaches can be interconnected to a continues design process, that allows the designer to create, manipulate, visualize and decide on spatial concepts in a holistic three-dimensional simulation.
keywords	Virtual Environment, Digital Architecture, Immersion, Perception, Human-Computer Interaction
series	DDSS
last changed	2008/09/01 17:06

_id	cdc2008_017
id	cdc2008_017
authors	Holzer, Dominik
year	2008
title	Embracing the Post-digital
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 17-22
summary	This paper discusses ways for designers to reconnect their design methodologies with the process of making. The paper takes a critical standpoint on the way architects have integrated digital tools and computational processes in their design over the past three to four decades. By scrutinising the support designers can derive from their virtual design-space it is debated in how far this may be complemented by sensory information-feedback from the physical design-space. A studio-based design project is used to illustrate how students have approached this issue to address aspects of building performance in a post-digital way. Moving between digital and physical models without difficulty, the students were able to study the effects geometrical changes on sustainability-performance in real time.
email
last changed	2009/01/07 08:05

_id	cf2011_p108
id	cf2011_p108
authors	Iordanova, Ivanka; Forgues Daniel, Chiocchio François
year	2011
title	Creation of an Evolutive Conceptual Know-how Framework for Integrative Building Design
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 435-450.
summary	Low productivity of the building sector today is attributed to the fragmentation of tasks, disciplines and responsibilities, as well as to the resistance to adopt integrative work processes and digital means. The increased complexity of architectural projects and the aroused social consciousness for sustainable environment calls for integrative design collaboration. Thus, there is need for a Conceptual Framework combining work processes, technological means and policy aspects. According to the literature, integrative multidisciplinary design is a strategy resulting in high performance buildings nurturing sustainable way of living (Reed et al. 2009, Krygiel & Nies 2008). Responding to the increased technological complexity of our built environment, as well as to the objective of meeting multiple criteria of quality, both necessitating multidisciplinary collaboration during design, Building Information Modeling (BIM) is seen as a powerful means for fostering quality, augmenting productivity and decreasing loss in construction. Based on recent research, we can propose that a sustainable building can be designed through an integrative design process (IDP) which is best supported by BIM. However, our ongoing research program and consultations with advanced practitioners underscore a number of limitations. For example, a large portion of the interviewed professionals and construction stakeholders do not necessarily see a link between sustainable building, integrative design process and BIM, while in our opinion, their joint use augments the power of each of these approaches taken separately. Thus, there is an urgent necessity for the definition of an IDP-BIM framework, which could guide the building industry to sustainable results and better productivity. This paper defines such a framework, whose theoretical background lays on studies in social learning (activity theory and situated action theories). These theories suggest that learning and knowledge generation occurs mainly within a social process defined as an activity. This corresponds to the context in which the IDP-BIM framework will be used, its final objective being the transformation of building design practices. The proposed IDP-BIM framework is based on previous research and developments. Thus, firstly, IDP process was well formalized in the Roadmap for the Integrated Design Process‚ (Reed et al.) which is widely used as a guideline for collaborative integrative design by innovating practices in USA and Canada. Secondly, the National Building Information Modeling Standard (NBIMS) of the USA is putting an enormous effort in creating a BIM standard, Succar (2008) recently proposed a conceptual framework for BIM, but BIM ontology is still under development (Gursel et al 2009). Thirdly, an iterative design process bound to gating reviews (inspired from software development processes) was found to be successful in the context of multidisciplinary design studios (reported in our previous papers). The feedback from this study allowed for modifications and adjustments included in the present proposal. The gating process assures the good quality of the project and its compliance to the client's requirements. The challenge of this research is to map the above mentioned approaches, processes and technologies into the design process, thus creating an integrated framework supporting and nurturing sustainable design. The IDP-BIM framework can be represented by a multidimensional matrix linked to a semantic network knowledge database: - the axes of the matrix being the project timeline, the design process actors and building stakeholders (architect, engineers, client, contractor, environmental biologist, etc.), or different aspects of building performance (environmental, functional, social, interior environment quality, cost, etc.); and - the knowledge database providing multiple layers of semantic support in terms of process, domain knowledge, technology and workflow at a given moment of the project and for a given actor or building aspect. The IDP-BIM framework is created as an evolutive digital environment for know-how and will have an established protocol for regular updates. The paper will firstly present the state of the art in IDP and BIM. Secondly, it will expose the methodology used for the definition of the Framework, followed by a description of its structure, contents and digital implementation. Then, some scenarios for the use of the Framework will be shown as validation.
keywords	integrated design process, BIM, multidisciplinary design, conceptual framework
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2008_175
id	sigradi2008_175
authors	Knight, Terry; Larry Sass, Kenfield Griffith, Ayodh Vasant Kamath
year	2008
title	Visual-Physical Grammars
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper introduces new visual-physical design grammars for the design and manufacture of building assembly systems that provide visually rich, culturally resonant design variations for housing. The building systems are intended to be tailored for particular cultures and communities by incorporating vernacular, decorative design into the assembly design. Two complementary areas of computational design research are brought together in this work: shape grammars and digital fabrication. The visual or graphic aspects of the research are explored through shape grammars. The physical design and manufacturing aspects are explored through advanced digital design and fabrication technologies and, in particular, build on recent work on mono-material assemblies with interlocking components that can be fabricated with CNC machines and assembled easily by hand on-site (Sass, 2007). This paper describes the initial, proof-of-concept stage of this work: the development of an automated, visual-physical grammar for an assembly system based on a vernacular language of Greek meander designs. A shape grammar for the two-dimensional Greek meander language (Knight, 1986) was translated into a three-dimensional assembly system. The components of the system are uniquely designed, concrete “meander bricks” (Figure 1). The components have integrated alignment features so that they can be easily fitted and locked together manually without binding materials. Components interlock horizontally to form courses, and courses interlock vertically in different ways to produce a visual variety of meander walls. The assembly components were prototyped at desktop scale with a layered manufacturing machine to test their appearance after assembly and their potential for design variations (Figure 2). Components were then evaluated as full-scale concrete objects for satisfaction of physical constraints related to concrete forming and component strength. The automated grammar (computer program) for this system generates assembly design variations with complete CAD/CAM data for fabrication of components formed from layered, CNC cut molds. Using the grammar, a full-scale mockup of a corner wall section was constructed to assess the structural, material, and aesthetic feasibility of the system, as well as ease of assembly. The results of this study demonstrate clearly the potentials for embedding visual properties in structural systems. They provide the foundations for further work on assembly systems for complete houses and other small-scale structures, and grammars to generate them. In the long-term, this research will lead to new solutions for economical, easily manufactured housing which is especially critical in developing countries and for post-disaster environments. These new housing solutions will not only provide shelter but will also support important cultural values through the integration of familiar visual design features. The use of inexpensive, portable digital design and fabrication technologies will allow local communities to be active, cooperative participants in the design and construction of their homes. Beyond the specific context of housing, visual-physical grammars have the potential to positively impact design and manufacture of designed artifacts at many scales, and in many domains, particularly for artifacts where visual aesthetics need to be considered jointly with physical or material requirements and design customization or variation is important.
keywords	Shape grammar, digital fabrication, building assembly, mass customization, housing
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	caadria2008_20_session3a_168
id	caadria2008_20_session3a_168
authors	Lan, Ju-Hung
year	2008
title	Smart Space for Office Daily Life: A Situated Life Pattern Approach
doi	https://doi.org/10.52842/conf.caadria.2008.168
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 168-173
summary	Researches in smart space design have been focused on using ubiquitous computing technologies to provide the visions of future lives in physical spaces. However, most researches have less concern for the logical usability in creating smart spaces for the occupants. The study is interested in designing a smart space which is occupant-centric and situated-life-oriented based on ubiquitous computing technologies. A spatial system prototype with smart door, smart wall, and smart table is developed from a situated life pattern approach to support typical office life events. The design problems of integrating ubiquitous computing devices with physical spatial components are explored and discussed.
keywords	Smart space, ubiquitous computing, situated life pattern
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ddss2008-39
id	ddss2008-39
authors	Meshitsuka, Yusuke and Yoshitsugu Aoki
year	2008
title	Stochastic Transition of Fire-prevention Performanceof Urban Area
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	The aim of this study is to analyze the tendency of building renewal in order to understand the fire prevention performance of the Tokyo metropolitan area. To this end, firstly, the Tokyo metropolitan area was divided into small areas of 250,000 square meters, and the following stochastic transition matrix of each small area was estimated, 1. Stochastic matrix of state transition between the building use types, 2. Stochastic matrix of state transition between the structures of buildings. Secondly, the converged state of each small area was estimated with a Markov chain model. Finally, small areas where fire prevention performance will change for the better/constant/worse were pointed out from their converged states. The results suggest that in small areas where percentage of housing and commerce are increasing, the fire prevention performance will become worse.
keywords	Urban Earthquake Disaster Mitigation, Earthquake Fire, Stochastic Transition Matrix
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-35
id	ddss2008-35
authors	Neema, M.N. and A. Ohgai
year	2008
title	A GA-based Multi-Objective Optimization Model for Location Planning of Urban Parks and Open Spaces A Case Study on Dhaka City
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	In this paper, we present a new multi-objective location model for urban parks and open spaces (POSs) planning. We developed a Genetic Algorithm (GA) based multi-objective optimization model (GAMOOM) to derive optimum locations of POSs by considering four incommensurable objectives with the provision of POSs near: 1) densely populated areas, 2) air polluted areas, 3) noisy areas, and 4) areas without open spaces. The success of the model is presented through its application as a case study on Dhaka City. Obtained results indicate that the model can successfully provide optimum location of required POSs. The findings from this study also signify that optimum location of POSs obtained by utilizing only the second objective is substantially different than that of others. Moreover, there is also difference in optimum location of POSs by taking into account only the third objective when compared with others. Therefore, considering single objective cannot give optimum results for good POSs planning. So, it is verified that POSs should be planned by optimizing multiple objectives instead of single objective. The outcome of this multi-objective GAMOOM model does have an implication on how POSs should be designed and managed by the planning authority for not only sustainable environment but also better quality of life in a city.
keywords	Genetic Algorithm (GA), Multi-Objective Optimization, Parks and Open Space (POS)
series	DDSS
last changed	2008/09/01 17:06

_id	ijac20076101
id	ijac20076101
authors	Oxman, Rivka
year	2008
title	Performance-based Design: Current Practices and Research Issues
source	International Journal of Architectural Computing vol. 6 - no. 1, pp. 1-17
summary	In view of current developments in the theory and technology of digital design, potential novel directions for environments that support performance-based design are beginning to emerge. The field of performance-based design is defined through an analysis of current work in the field. Various models of performance-based architectural design are presented and discussed. On the basis of this analysis, key concepts and issues in the application of performance-based design in architecture are defined and certain research directions for the development of new approaches are presented. Finally we propose a new approach termed: Performative Design. Performative Design suggests that in creating simulation environments for performance-based architectural design both generative and evaluative capabilities can be integrated within performance-based simulations. The potential of performance-based simulation as a model of performance-based design is explored through a case study from an experimental digital design studio. Implication of this work on future research directions in the field is explicated.
series	journal
last changed	2008/06/18 08:12

_id	caadria2008_10_session1b_081
id	caadria2008_10_session1b_081
authors	Penttilä, Hannu; Markus Peter, Dietrich Elger
year	2008
title	Evaluating VBE AND BIM-frameworkS A Cost Estimation Case Study and Reflections to Environmental Issues
doi	https://doi.org/10.52842/conf.caadria.2008.081
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 81-88
summary	This paper describes and evaluates two recently emerged concepts, Virtual Building Environment VBE and Building Information Modelling BIM, fitting them into the context of contemporary design and construction. Both are elementary concepts in modern digitally “reinforced” design and construction. A case study of cost estimation is presented to illustrate how discipline related issues are currently managed within VBE and BIM. An environmental aspect is presented as a corresponding domain to evaluate the other use cases of building related information. Other similar domains to be evaluated perhaps in further case studies could be the functional user aspect, the project management aspect and the regulating aspect by the society and authorities. A hypothetical assumption is, that methods and technologies which are currently used within VBE and BIM, mainly by designers, can well support various data extractions from BIM-models, but they may not serve all construction process participants in the most beneficial way. Also wider scale building portfolios are requested as conceptual extensions to VBE and BIM. This study is based on ongoing PhD studies on building information modelling and environmental life cycle assessment.
keywords	VBE; virtual building environment; BIM; building information model; CAD; cost estimation; life cycle assessment; LCA
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	9d5f
id	9d5f
authors	Podevyn M, Horne M, Fisher P, Thompson, E
year	2008
title	Global Visualisation Engines – Issues for Urban Landscape Planning Participation Processes
source	Digital Design in Landscape Architecture 2008, Proceedings at Anhalt University of Applied Sciences, 29-31 May 2008
summary	Traditional planning processes use two-dimensional drawings, plans, sections, elevations and artists’ impressions to communicate design intent to interested parties. Three-dimensional computer visualisation technologies that support the planning process raise institutional and organisational challenges as their perceived benefits are considered. Virtual Reality (VR) models add interactivity and immersiveness to landscape visualisations but require appropriate technical input and management. This paper explores two main themes. Firstly, how interactive 3D computer simulations of planning proposals can be adopted to successfully improve the traditional process. It reports on a pilot study to examine how architects, clients, planning officers and university researchers have worked together to systematically examine and analyse this changing process. It reports on issues concerned with ownership of city models, the roles and the compatibility, accuracy and remote sharing of urban data. Secondly, we explore the emerging theme of web-based GIS applications and their impact on architectural visualisation. The process of placing urban data onto Google Earth was tested and the resulting issues emerging with this software, including IT and data management and accuracy issues for suitable architectural visualisation are discussed. The study also reports and offers an overview of placing accurate urban landscape data onto Google Earth and a discussion of using this method for online public participation and communicating technical building information.
keywords	3D modelling, planning process, VR city models, Google Earth
series	other
type	normal paper
email
last changed	2008/11/02 21:09

_id	ddss2008-37
id	ddss2008-37
authors	Rodrigues, Daniel S.; Rui A.R. Ramos and José F.G. Mendes
year	2008
title	Decision support system for university campus qualityof life evaluation based on users’ perceptionA case study applied to the Campus of the University of Minho
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper presents the work that conduced to the development of an information system to evaluate and monitor university campi quality of life. The system embodies two main functions: to provide information to the community and to support campus planning and management. Using a scenario describing possible actions, some users evaluated how its implementation would interfere with the quality of life on the campus. Results showed that it would produce a global improvement, in comparison to the year of the study.
keywords	University Campus, Quality of Life, Decision Support System
series	DDSS
last changed	2008/09/01 17:06

For more results click below: