Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1150

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2009_709
id	sigradi2009_709
authors	Angulo, Antonieta; John Fillwalk; Guillermo Vásquez de Velasco
year	2009
title	Collaborating in a Virtual Architectural Environment: The Las Americas Virtual Design Studio (LAVDS) populates Second Life
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The paper describes exploratory work in the design, construction, and habitation of a virtual structure (VS) nested within an Internet-based multi-user environment and serving a geographically distributed collective of architecture students and faculty. In addition to a discourse on the design and implementation parameters that were used, the paper seeks to provide findings that make reference to the quality of teaching/learning experience of users and the effectiveness of the interaction among users while working on a common architectural design project. This experience will further contribute to the knowledge base that will be needed in the design of virtual architecture.
keywords	Virtual design studio; Second Life; Multi-user environment; Architectural design and learning
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia21_444
id	acadia21_444
authors	Crawford, Assia
year	2021
title	Mitochondrial Matrix
doi	https://doi.org/10.52842/conf.acadia.2021.444
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 444-453.
summary	The following project was created as part of an art residency with the Wellcome Centre for Mitochondrial Research (WCMR) at Newcastle University. The WCMR specializes in leading-edge research into mitochondrial disease, investigating causes, treatments, and ways of avoiding hereditary transmission. Mitochondria is believed to have started off as a separate species that through symbiosis came to be the powerhouse of each cell in our bodies (Hird 2009). Mitochondrial disease is a genetic disorder that is caused by genetic mutations of the DNA of the mitochondria or the cell that in turn affects the mitochondria (Bolano 2018). Mitochondria is a hereditary condition and can affect people at different stages in their lives. It can affect various organs and has a link to various types of conditions. Therefore, the patient experience is unique to each individual and the elusive nature of the condition can make it particularly challenging due to the complexity of the disorder as well as the inaccessible scale on which these variations occur (Chinnery 2014)
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	sigradi2009_1044
id	sigradi2009_1044
authors	Cruz, Débora Melo; Gabriela Celani
year	2009
title	A influência de Frank Lloyd Wright sobre João Batista Vilanova Artigas – uma análise formal [The Influence of Frank Lloyd Wright on João Batista Vilanova Artigas - A Formal Analysis]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This study intends to propose a new use of the shape grammar: verify the influence of a certain architect’s language over another architect’s language. Some Brazilian modern architecture critics suggest the existence of an influence of Wright’s prairie houses over Artigas’ early work, but the methods used to reach to this conclusion are always empirical and not very objective. The present work aims to confirm this influence in a more rational manner, comparing Wright’s prairie houses grammar developed by Koning and Eizenberg (1981) to Artigas’ first phase grammar that will developed in this work.
keywords	Gramática da forma; F. L. Wright; J. V. Artigas
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	sigradi2009_1048
id	sigradi2009_1048
authors	de Faria, José Neto
year	2009
title	Design para Terminais ‘Touch E-paper’: o Uso de ‘Mock-Ups’ e ‘Vídeos Conceituais’ no Desenvolvimento de Novos Produtos e Serviços [Design for ‘Touch E-paper’: the use of ‘mock-ups’ and conceptual videos in the development of new products and services]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	Design for ‘Touch E-paper’ terminals analyzes and discuses how the methodological use of ‘mock-ups’ and ‘conceptual videos’ can assist the view and the understanding of the project requirements, which are necessary to the development of new products and services concepts. It presents the head pedagogical didactic experience, in ‘Design Autoral II’ discipline, during the development of new concept products and services with the use of new technologies. It highlights how the method, in the development of the project, helps to bring up new issues about the way how the products and services relate to their ‘activity inducer’ and their ‘environment of use’.
keywords	Design; E-paper; Mock-up; Conception video; Products
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	sigradi2009_1129
id	sigradi2009_1129
authors	Matsubara, Juliana; Carlos V. Vaz; Gabriela Celani; Edison Fávero
year	2009
title	The miniature city: the use of rapid prototyping techniques to make urban scale models.
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The aim of the present paper is to describe a case study about the production of scale models of large urban areas with the use of digital prototyping techniques. Throughout the year 2008, the Laboratory for Automation and Prototyping in Architecture and Construction (LAPAC) was commissioned with the production of a scale model of the State University of Campinas´ campus. Laser-cutting and Selective Laser Sintering were used to produce the terrain and the buildings. The products that resulted from this research demonstrate that rapid prototyping processes are extremely helpful to produce scale models of large urban areas.
keywords	Concept; scale model; process; digital prototyping
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	acadia20_574
id	acadia20_574
authors	Nguyen, John; Peters, Brady
year	2020
title	Computational Fluid Dynamics in Building Design Practice
doi	https://doi.org/10.52842/conf.acadia.2020.1.574
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 574-583.
summary	This paper provides a state-of-the-art of computational fluid dynamics (CFD) in the building industry. Two methods were used to find this new knowledge: a series of interviews with leading architecture, engineering, and software professionals; and a series of tests in which CFD software was evaluated using comparable criteria. The paper reports findings in technology, workflows, projects, current unmet needs, and future directions. In buildings, airflow is fundamental for heating and cooling, as well as occupant comfort and productivity. Despite its importance, the design of airflow systems is outside the realm of much of architectural design practice; but with advances in digital tools, it is now possible for architects to integrate air flow into their building design workflows (Peters and Peters 2018). As Chen (2009) states, “In order to regulate the indoor air parameters, it is essential to have suitable tools to predict ventilation performance in buildings.” By enabling scientific data to be conveyed in a visual process that provides useful analytical information to designers (Hartog and Koutamanis 2000), computer performance simulations have opened up new territories for design “by introducing environments in which we can manipulate and observe” (Kaijima et al. 2013). Beyond comfort and productivity, in recent months it has emerged that air flow may also be a matter of life and death. With the current global pandemic of SARS-CoV-2, it is indoor environments where infections most often happen (Qian et al. 2020). To design architecture in a post-COVID-19 environment will require an in-depth understanding of how air flows through space.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia09_122
id	acadia09_122
authors	Oxman, Neri
year	2009
title	Material-Based Design Computation: Tiling Behavior
doi	https://doi.org/10.52842/conf.acadia.2009.122
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 122-129
summary	From natural objects to man-made artifacts, tiling is all around us: it is the act of rationalizing highly complex form by breaking it up into smaller, continuous components. If well pursued, tiled objects can be easily designed and assembled. However, a geometric-centric view of tiling, whereby a predefined form determines the shape, size, and organization of tiles, has victimized the field of digital design. This paper questions the role of tiling as rationalizing method and offers an alternative theoretical framework and technical grounding for tiling behavior: the act of generation-through-tessellation informed by material behavior. The tools developed are implemented in the design of a 3D-printed chaise lounge, using multiple materials. The technical objective is to introduce a quantitative characterization and analysis of property mapping, as it is applied to a tiling algorithm using Voronoi cell tessellation. The network of tessellated Voronoi cells is used as an element in the Voronoi Finite Element Method (V-FEM) that the author developed. Various characterization functions and geometric parameters are generated, and V-FEM is executed for plane-strain analysis of doubly curved surfaces, from which global and local responses are evaluated.
keywords	Tessellation, tiling, Voronoi, Algorithmic design
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 08:00

_id	sigradi2009_730
id	sigradi2009_730
authors	Ramos, Fernando Vázquez
year	2009
title	Do Analógico ao Digital? [From analog to digital?]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	After admitting that the immersion of Architecture in digital environment happened in the last decade of the XX Century, this paper argues about the (im)possible links established between analogical and digital worlds. Discarding the possibility of a “transition” between them, the paper points the existence of a “jump” that, more than to tie, unlinks them leaving an emptiness that has to be analyzed. Coexisting in this emptiness we find hybrid structures of pragmatic approach, ruptures of paradigms and sprouting of new forms to project and to make architecture. Clarify this panorama is a basic task we need to do before facing the future, not only in a professional way, but also in the field of architectural education, because we have to know which architecture we desire to transmit.
keywords	Architectural design; architectural representation; architectural drawings; cognition; analog thinking; digital universe; Modernity; Information Technology
series	SIGRADI
email
last changed	2016/03/10 09:58

_id	sigradi2009_1071
id	sigradi2009_1071
authors	Skinner, Martha L.; Douglas Hecker
year	2009
title	BiCi_N, a CT-scan of Barcelona
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	BiCi_N is a "living" map of Barcelona that visualizes the intricate relationship between the human body and the city. Using GPS (Global Positioning System) and A/V (Audio/Video) devices on Bicing bikes the city is understood from above and from below as a dynamic quantitative and qualitative ever-changing entity defined through the activities of numerous inhabitants. From these a collective story is assembled as users go about their lives. The bicycle as an extension of the human body into the city becomes a full-scale mapping instrument, which captures both the sensual/experiential and the scientific/abstract notation of the human body into the city body and viceversa.
keywords	Mapping; Audio/Video, GPS; open source; collective; daily life; body; city
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	ecaadesigradi2019_508
id	ecaadesigradi2019_508
authors	Yenice, Yagmur and Park, Daekwon
year	2019
title	V-INCA - Designing a smart geometric configuration for dry masonry wall
doi	https://doi.org/10.52842/conf.ecaade.2019.2.515
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 515-520
summary	Soil is still used as a building material in many parts of the world, especially in rural areas. Approximately 30% of the world's population is still living in shelters made by soil (Berge 2009). One of the techniques is using soil in mudbrick form, which is sun dried instead of being fired in kilns. However, mud bricks have low compressive and tensile strength. Instead of enhancing the mix formula, we focus on designing the geometry of the brick itself to improve walls' overall compressive and tensile strength. The goal of the research is to explore an innovative way to build masonry walls through geometrical examination together with computer aided design. Unlike traditional horizontal laying of the rectangular brick elements, 3D designed blocks take advantage of gravity and foster an accelerated assembly without mortar. They create a balance point in the middle of the wall during the construction. The geometry of V-INCA blocks allows dry construction which will reduce the amount of time spent on the site. Load distribution and the friction between two surfaces are sufficient to have a dry construction. Thus, a wall built with V-INCA is stronger intrinsically due to its geometry.
keywords	Dry masonry construction; smart geometrical design; on-site material; compressed earth blocks; Inca masonry
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:57

_id	3509
authors	Bourdakis, V. and Day, A.
year	1997
title	The VRML Model of the City of Bath
source	Proceedings of the Sixth International EuroplA Conference, europia Productions
summary	The aim of this research project is to utilise VRML models in urban planning in order to provide easy-to-use visualisation tools that will allow non-experts to understand the implications of proposed changes to their city. In this paper, issues related to the construction and use of large urban models are discussed based on the authors' experience constructing the Bath computer model. Problems faced during the creation, translation and final adaptation of the original CAD model are presented, the solutions devised are demonstrated and suggestions regarding the management of similar projects are given.
series	other
email
last changed	2003/11/21 15:16

_id	ddss9219
id	ddss9219
authors	Bourdakis, V. and Fellows, R.F.
year	1993
title	A model appraising the performance of structural systems used in sports hall and swimming pool buildings in greece
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The selection of the best performing structural system (among steel, timber laminated, concrete, fabric tents) for medium span (30-50m) sports halls and swimming pools in Greece formed the impetus for this research. Decision-making concerning selection of the structural system is difficult in this sector of construction, as was explained in the "Long Span Structures" conference (November 1990, Athens. Greece). From the literature it has been found that most building appraisals end up at the level of data analysis and draw conclusions on the individual aspects they investigate. These approaches usually focus on a fraction of the problem, examining it very deeply and theoretically. Their drawback is loss of comprehensiveness and ability to draw conclusions on an overall level and consequently being applicable to the existing conditions. Research on an inclusive level is sparse. In this particular research project, an inclusive appraisal approach was adopted, leading to the identification of three main variables: resources, human-user-satisfaction, and technical. Consequently, this led to a combination of purely quantitative and qualitative data. Case studies were conducted on existing buildings in order to assess the actual performance of the various alternative structural systems. This paper presents the procedure followed for the identification of the research variables and the focus on the development of the model of quantification. The latter is of vital importance if the problem of incompatibility of data is to be solved, overall relation of findings is to be achieved and holistic conclusions are to be drawn.
series	DDSS
last changed	2003/11/21 15:16

_id	b0d8
authors	Bourdakis, V.
year	1996
title	From CAAD to VRML: London Case Study
source	The 3rd UK VRSIG Conference Full Paper Proceedings, De Montfort University
summary	In this paper, the suitability and usability of VRML for urban modelling is discussed based on the experience gained by the creation of urban models of varying sizes, level of detail and use. Areas where the current VRML specification is failing to satisfy the needs of large-scale urban modelling are highlighted. Properties of a successful alternative or VRML3.0 specification are suggested and briefly discussed.
series	other
email
last changed	2003/11/21 15:16

_id	1a91
id	1a91
authors	Bourdakis, V.
year	1997
title	The Future of VRML on Large Urban Models.
source	The 4th UK VRSIG Conference
summary	In this paper, the suitability and usability of VRML for urban modelling is discussed based on the experience gained by the creation of urban models of varying sizes, level of detail and use. Areas where the current VRML specification is failing to satisfy the needs of large-scale urban modelling are highlighted. Properties of a successful alternative or VRML3.0 specification are suggested and briefly discussed.
keywords	3D City Modeling, Development Control, Design Control
series	other
email
last changed	2003/11/21 15:16

_id	a47a
authors	Bourdakis, V.
year	1998
title	Navigation in Large VR Urban Models. In Virtual Worlds
source	J. Heudin (ed.), Lecture Notes in Artificial Intelligence 1434, Springer, Berlin, pp. 345-356
summary	The aim of this research project is to utilise VR models in urban planning in order to provide easy-to-use visualisation tools that will allow non-experts to understand the implications of proposed changes to their city. In this paper, the navigation problems identified whilst working on large VR city models are discussed and a "fly" based navigation mode is proposed and evaluated.
keywords	3D City modeling
series	other
email
more	http://fos.prd.uth.gr/vas/papers/VW98/
last changed	2003/04/02 11:55

_id	ecaade2011_019
id	ecaade2011_019
authors	Bourdakis, Vassilis
year	2011
title	Interactive Spatial Design course analysis: 10 years, 150 projects
doi	https://doi.org/10.52842/conf.ecaade.2011.647
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.647-652
summary	The paper is giving an overview and analysis of an undergraduate, sixth semester, compulsory course titled “Virtual Reality: Interactive Spatial Design” at the department of Architecture, School of Engineering, University of Thessaly, Volos, Greece. It is one of the very few courses on designing digital/synthetic and interactive space_and not merely utilising Virtual Reality (VR) technologies for architectural visualisations_in architectural curricula. The aim of this paper is to primarily draw on a ten year experience on teaching the course and to open up a discussion on the implications of such digital design courses and address emerging problems. This is achieved through a reflection on the teaching process (interaction as design process, curriculum and attained goals) and an analysis and genre classification of the 150 submitted projects.
wos	WOS:000335665500075
keywords	Studio teaching; interaction; virtual environments; digital design
series	eCAADe
email
last changed	2022/05/01 23:21

_id	7674
authors	Bourdakis, Vassilis and Charitos, Dimitrios
year	1999
title	Virtual Environment Design - Defining a New Direction for Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.1999.403
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 403-409
summary	This paper considers the design and development of virtual environments (VEs) and the way that it relates to traditional architectural education and practice. The need for practitioners who will contribute to the design of 3D content for multimedia and virtual reality applications is identified. The design of space in a VE is seen as being partly an architectural problem. Therefore, architectural design should play an important role in educating VE designers. Other disciplines, intrinsically related to the issue of VE design, are also identified. Finally, this paper aims at pointing out the need for a new direction within architectural education, which will lead towards a generation of VE architects.
keywords	Virtual Environments, Architectural Design, Architectural Education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ee65
authors	Bourdakis, Vassilis and Charitos, Dimitris
year	2002
title	Teaching Virtual Environment Design
doi	https://doi.org/10.52842/conf.ecaade.2002.042
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 42-49
summary	In a previous paper, the authors considered the design and development of virtual environments (VEs) pointing out the need for a new direction within architectural education, leading towards a generation of VE architects. It was suggested that there is an urgent need for educating practitioners who will contribute to the design of 3D content for multimedia and virtual reality applications. This paper focuses on the application of these principles and ideas into the structure and methodology of three VE design courses, taught by the authors. These courses are by no means suggested as exhaustive examples of teaching this subject. They are seen as preliminary approaches, adapting to the educational context they are integrated within. Bearing in mind the problems relating to teaching large numbers of students with a design studio approach, difficult concepts, resources availability, fighting misconceptions, techno-phobia the following areas are discussed in the hope that they will contribute to VE design curricula in the near future.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2e36
authors	Bourdakis, Vassilis
year	1997
title	Making Sense of the City
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 663-678
summary	Large-scale, three dimensional, interactive computer models of cities are becoming feasible making it possible to test their suitability as a visualisation tool for the design and planning process, for data visualisation where socio-economic and physical data can be mapped on to the 3D form of the city and as an urban information repository. The CASA developed models of the City of Bath and London's West End in VRML format, are used as examples to illustrate the problems arising. The aim of this paper is to reflect on key issues related to interaction within urban models, data mapping techniques and appropriate metaphors for presenting information.
keywords	3D City modeling, Urban Modelling, Virtual Environments, Navigation, Data Mapping, VRML
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	5ac1
authors	Bourdakis, Vassilis
year	2001
title	On Developing Standards for the Creation of VR City Models
doi	https://doi.org/10.52842/conf.ecaade.2001.404
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 404-409
summary	The paper is an inclusive summary of research work on creating VR city models carried out over the last six years in the UK and Greece aiming to put into discussion the guidelines/ rules developed by the author. The paper is structured in three sections referring to the main stages in terms of either technical expertise and problem solving or conceptual structuring of information: creation of 3D city models, CAAD versus VR in digital city modelling and finally utilizing digital city models. The expected outcome of the work presented is the establishment of a body of knowledge that will facilitate the development of standards and guidelines for the creation of city models. There are obvious advantages in having a compatible set of city 3D models. On the other hand, there are different rules to be followed and issues to be solved, according to the scale of the model, level of detail that is needed—all these rules relate to the projected use of the model.
keywords	Digital City Models, 3D Modelling, Virtual Reality, Urban Planning
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: