Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1324

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2009_103
id	caadria2009_103
authors	Boeykens, Stefan; Herman Neuckermans
year	2009
title	Content Management Systems Versus Learning Environments
doi	https://doi.org/10.52842/conf.caadria.2009.285
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 285-294
summary	Schools and teachers increasingly apply Online Learning Environments for teaching and course management. In many cases, an existing platform is used to support the curriculum. At the K.U. Leuven in Belgium a campus-wide platform is provided, using a commercial Content Management System. At the same time, the Design and Building Methodology research group at the Department of Architecture, Urbanism and Planning developed a custom portal to organize Computer Aided Architectural Design courses and seminars. Integration of this portal into the university system was rather disappointing, since much of the flexibility and customizability was lost, without any chance of filling in the gaps. This article discusses the possibilities and limitations of existing web-based systems to support Computer Aided Architectural Design teaching and reports on our own experiences from the last decade. A comparison of selected systems is juxtaposed with the requirements derived from these experiences.
keywords	Education; CMS; LMS; CAAD
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	acadia21_444
id	acadia21_444
authors	Crawford, Assia
year	2021
title	Mitochondrial Matrix
doi	https://doi.org/10.52842/conf.acadia.2021.444
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 444-453.
summary	The following project was created as part of an art residency with the Wellcome Centre for Mitochondrial Research (WCMR) at Newcastle University. The WCMR specializes in leading-edge research into mitochondrial disease, investigating causes, treatments, and ways of avoiding hereditary transmission. Mitochondria is believed to have started off as a separate species that through symbiosis came to be the powerhouse of each cell in our bodies (Hird 2009). Mitochondrial disease is a genetic disorder that is caused by genetic mutations of the DNA of the mitochondria or the cell that in turn affects the mitochondria (Bolano 2018). Mitochondria is a hereditary condition and can affect people at different stages in their lives. It can affect various organs and has a link to various types of conditions. Therefore, the patient experience is unique to each individual and the elusive nature of the condition can make it particularly challenging due to the complexity of the disorder as well as the inaccessible scale on which these variations occur (Chinnery 2014)
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	ijac20097107
id	ijac20097107
authors	Hadjimitsis, D.G.; Themistocleous, K.; Agapiou, A.; Clayton, C.R.I.
year	2009
title	Monitoring Archaeological Site Landscapes in Cyprus using Multi-temporal Atmospheric Corrected Image Data
source	International Journal of Architectural Computing vol. 7 - no. 1, 121-138
summary	This paper aims to examine the use of satellite remote sensing for monitoring archaeological and more generally cultural heritage sites. For this purpose, multi-temporal data from Landsat 5 TM, Landsat 7 ETM+ and Quickbird images were applied. The paper also discusses the importance of atmospheric correction at the pre-processing step in order to determine true surface reflectance values by removing these effects from satellite images. Atmospheric correction is arguably the most important part of the pre-processing of satellite remotely sensed data and any omission produces erroneous results. The effects of the atmosphere are more severe where dark targets are shown in the satellite image. In the management of cultural heritage sites, since temporal satellite images are required for monitoring purposes, the effect of the atmosphere must be considered. In-situ spectro-radiometric measurements using the GER1500 field spectro-radiometer have been used to assess the reflectance values found after applying the darkest pixel atmospheric correction to the image data. The study area consist the Amathus archaeological site in Limassol and the Nea Paphos archaeological site area located in Paphos district area in Cyprus. Vegetation Index (NDVI) change detection algorithm has been applied to a series of thirteen Landsat TM/ETM+ images of Amathus archaeological site in Limassol. Classification and extraction algorithms have been applied to Landsat TM and Quickbird high resolution images of Nea Paphos archaeological site area.
series	journal
last changed	2009/06/23 08:07

_id	ecaade2009_033
id	ecaade2009_033
authors	Jensen, Mads Brath; Mortensen, Henrik Rubæk; Mullins, Michael; Kirkegaard, Poul Henning
year	2009
title	Material Systems: A Design Approach
doi	https://doi.org/10.52842/conf.ecaade.2009.721
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 721-728
summary	This paper describes and reflects upon the results of an investigative project which explores the setting up of a material system – a parametric and generative assembly consisting of and taking into consideration material properties, manufacturing constraints and geometric behavior. The project approaches the subject through the construction of a logic-driven system aiming to explore the possibilities of a material system that fulfills spatial, structural and performative requirements concurrently and how these are negotiated in situations where they might be conflicting.
wos	WOS:000334282200087
keywords	Generative design, design tool development, material systems
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2009_099
id	ecaade2009_099
authors	Kinayoglu, Gökçe
year	2009
title	Using Audio-Augmented Reality to Assess the Role of Soundscape in Environmental Perception: An Experimental Case Study at UC Berkeley Campus
doi	https://doi.org/10.52842/conf.ecaade.2009.639
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 639-648
summary	Sounds, along with other senses, have a profound influence on our perception of the environment. The multi-modality of perceptual processing is influential in cognitive interpretation, semantic and aesthetic evaluations of environmental scenes. This paper describes an experimental case study using audio-augmented reality, carried out in order to better understand how sound influences sense of place. A correlation is established between soundscape and sense of place that depends on audio-visual congruence based on cultural, aesthetic and semantic factors. Subjective influences of soundscape on place experience are grouped and discussed under 5 areas that were possible to identify: Emotive and synaesthetic effects; effects on attention, gaze and behavior; effects on spatial orientation and sense of scale; influence of audio-visual congruence on sense of place; and perception of personal and social space.
wos	WOS:000334282200077
keywords	Augmented reality, soundscape, environmental perception, place theory, environmental acoustics
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:52

_id	sigradi2009_1006
id	sigradi2009_1006
authors	Kós, José Ripper; Thêmis da Cruz Fagundes; Almir Francisco Reis; Filipe Lima Botelho
year	2009
title	Modelo urbano 3D como instrumento de integração de pesquisas acadêmicas [3D city model as a tool for connecting academic research]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This paper describes the city modeling process of Florianopolis, Brazil, within an architecture graduate program. The model focuses the city urban evolution and aims to integrate different research groups that have Florianopolis as their study object. The process of interpreting historical and other analog data in order to include them into the model becomes a tool to connect research information and stimulate collaboration with researchers who have worked separately. We discuss some tools applied to the modeling process and some research projects that are starting to be embedded in the model.
keywords	Modelo urbano 3D; evolução urbana; práticas colaborativas; Florianópolis
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
doi	https://doi.org/10.52842/conf.acadia.2016.140
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	ijac20097110
id	ijac20097110
authors	Ruhland, K.; Sedlmair, M.; Bioletti, S.; O'Sullivan, C.
year	2009
title	LibViz: Data Visualisation of the Old Library
source	International Journal of Architectural Computing vol. 7 - no. 1, 177-192
summary	The Old Library of Trinity College Dublin, built in 1732, is an internationally renowned research library. In recent decades it has also become a major tourist attraction in Dublin, with the display of the Book of Kells within the Old Library now drawing over half a million visitors per year. The Preservation and Conservation Department of the Library has raised concerns about the impact of the environment on the collection. The location of the building in the city centre, large visitor numbers, and the conditions within the building are putting the collection at risk. In developing a strategic plan to find solutions to these problems, the department has been assessing and documenting the current situation. This paper introduces ongoing work on a system to visualise the collected data, which includes: dust levels and dispersion, internal and external temperature and relative humidity levels, and visitor numbers in the Old Library. We are developing a user interface for which the data, originally stored in various file formats, is consolidated in a database which can be explored using a 3D virtual reconstruction of the Old Library. With this novel technique, it is also possible to compare and assess the relationships between the various datasets in context.
series	journal
last changed	2009/06/23 08:07

_id	acadia09_26
id	acadia09_26
authors	Strehlke, Kai
year	2009
title	Digital Technologies, Methods, and Tools in Support of the Architectural Development at Herzog & de Meuron
doi	https://doi.org/10.52842/conf.acadia.2009.026
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 26-29
summary	The architectural office of Herzog & de Meuron (HdM) started in 1978 and has grown to a company of about 330 employees. Besides the two founding partners who participate in every project there are nine additional partners who take responsibility for individual projects. Furthermore, the office collaborates with artists and outside experts of various fields to support and enhance the available knowledge and skills. The partners ensure that each project has a distinct and unique identity and is well adapted to its environment. This emphasis on the uniqueness of a project characterizes the design philosophy of HdM.The growth of the office and the size and complexity of the projects has demanded continuous adaptation of the office structure. The amount of required data is increasing exponentially, while the design cycles are, generally, becoming shorter. The challenge is to find the right tools and media. HdM does not restrict itself to the realm of digital tools but, rather, uses all possible media: hand sketches in pencil, together with diagrams, drawings, and images, as well as physical and digital models.
keywords	Parametric design, fabrication, prototype, collaboration
series	ACADIA
type	Keynote paper
email
last changed	2022/06/07 07:56

_id	ecaade2009_186
id	ecaade2009_186
authors	Trento, Armando; Loffreda, Gianluigi; Kinayoglu, Gökçe
year	2009
title	Participative Technologies: an Internet-based Environment to Access a Plural Design Experience: Knowledge Modeling to Support User’s Requirements Formalization
doi	https://doi.org/10.52842/conf.ecaade.2009.515
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 515-522
summary	“Re-shaping artificially the Earth on human needs” implies a very complex industrial system that is performed through a very complex process. It consists of a collective, finalized and plural-constrained process, scheduled by phases, made up by several actors, characterized by the co-presence of numerous and very different (non-) specialist skills. In this paper we define the enhancement path of a web-based collaborative environment – discussed in a previous work – laying upon actual design entities representation an innovative logical level for knowledge formalization. It is presented an example of end-users requirement formalization, aimed at supporting the designers in the process by means of rule-based project suggestions.
wos	WOS:000334282200062
keywords	Collaborative Environments, participative design, knowledge modeling
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:57

_id	ijac20097307
id	ijac20097307
authors	Zeiler, Wim; Savanovic, Perica
year	2009
title	Integral Morphological C-K design approach for multi-disciplinary building design
source	International Journal of Architectural Computing vol. 7 - no. 3, 429-458
summary	This paper presents a theoretical approach to collaborative design management. The goal is to integrate design and engineering knowledge in the conceptual phase of building design. Based on an integral design process model, morphological overviews are used as a tool to implement C-K (concept-knowledge) theory, to increase knowledge creation and to stimulate knowledge exchange within the building design team. The project was carried out in close cooperation with professional societies within the building design field. The set-ups of the workshops used to implement and to test the theoretical approach are presented as well as the experiences of the participants. More than 100 experienced professionals participated in the workshops and the workshops now have become part of the permanent professional training program of one of the professional societies.
series	journal
last changed	2009/10/20 08:02

_id	096e
authors	Papamichael, K., Porta, J.L., Chauvet, H., Collins, D., Trzcinski, T. , Thorpe, J. and Selkowitz, S.
year	1996
title	The Building Design Advisor
doi	https://doi.org/10.52842/conf.acadia.1996.085
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 85-97
summary	The Building Design Advisor (BDA) is a software environment that supports the integrated use of multiple analysis and visualization tools throughout the building design process, from the initial, schematic design phases to the detailed specification of building components and systems. Based on a comprehensive design theory, the BDA uses an object-oriented representation of the building and its context, and acts as a data manager and process controller to allow building designers to benefit from the capabilities of multiple tools. The BDA provides a graphical user interface that consists of two main elements: the Building Browser and the Decision Desktop. The Browser allows building designers to quickly navigate through the multitude of descriptive and performance parameters addressed by the analysis and visualization tools linked to the BDA. Through the Browser the user can edit the values of input parameters and select any number of input and/or output parameters for display in the Decision Desktop. The Desktop allows building designers to compare multiple design alternatives with respect to any number of parameters addressed by the tools linked to the BDA. The BDA is implemented as a Windows-based application for personal computers. Its initial version is linked to a Schematic Graphic Editor (SGE), which allows designers to quickly and easily specify the geometric characteristics of building components and systems. For every object created in the SGE, the BDA supplies “smart” default values from a Prototypical Values Database (PVD) for all non-geometric parameters required as input to the analysis and visualization tools linked to the BDA. In addition to the SGE and the PVD, the initial version of the BDA is linked to a daylight analysis tool, an energy analysis tool, and a multimedia Case Studies Database (CSD). The next version of the BDA will be linked to additional tools, such as a photo-accurate rendering program and a cost analysis program. Future versions will address the whole building life-cycle and will be linked to construction, commissioning and building monitoring tools.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	ascaad2009_mohamed_abdalla
id	ascaad2009_mohamed_abdalla
authors	Abdalla, Mohamed Saad Atia
year	2009
title	3D Model and Decision Support System for Fire Safety: A case study of Kingdom of Bahrain
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 419-430
summary	Fire agencies on all levels try hard to save lives, properties, and natural resources. Accurate access to critical information is essential in this regard, many agencies around the world have embraced GIS as a tool that helps them balance needs, uses, and hazards to promote sustainability of the environment while identifying and limiting vulnerability. At Kingdom of Bahrain, Ministry of interior established the Geographic Security System (GSS) to enhance the emergency response. The 3D of the GSS Consisted of 3 main parts: (1) 3D for terrain model, (2) 3D model for entire targeted zones, and (3) 3D models for individual buildings. In this paper, the integration between GSS system and 3D model will be illustrated, and how this kind of integration could enhance decision support system (DSS) for fire safety at kingdom of Bahrain. On other hand, we will highlight the technical and legislation difficulties faced in this project. Also, the future steps to enhance DSS will be discussed.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	caadria2009_031
id	caadria2009_031
authors	Abdelhameed, Wael
year	2009
title	Cognition Model in Conceptual Designing
doi	https://doi.org/10.52842/conf.caadria.2009.771
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 771-780
summary	Both design researchers and cognitive scientists have developed various process models to study human creative behaviour in design. The models developed are often based on observations of design processes and analysis of design protocols. This research paper reports the-stateof- the-art in the area of cognition models that present design activities in conceptual designing. The research paper investigates the approaches of these cognition models. A new approach of a cognition activity model in conceptual designing is proposed. The new approach used in the introduced model takes into the account factors and activities that are related to the external environment of design (design medium). The external environment has an important role in the cognition activities and the evaluation process in a way that can hardly be ignored or neglected. The presented model of cognition activities in conceptual designing highlights two main factors employed in all the iteration loops of the model, namely: media use and representation. Case studies of architecture students’ designs have been analyzed. The analysis of these case studies helped in forming the proposed model. Various results have been concluded and reported.
keywords	Cognition model; conceptual designing; design process; design theory
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2009_410
id	cf2009_410
authors	Abdelhameed, Wael
year	2009
title	Reciprocal relationship of conceptualization and design problem definition: A proposed approach for an architectural design studio
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 410-422
summary	This research paper proposes an approach to be applied in the design studio. The proposed approach highlights the reciprocal relationship between concept articulation and design problem definition in a design method that exposes different design activities related to this relationship. The design method was applied in a design studio of an intermediate level. The study reports the analysis of student designs in terms of the deign method employed. Moreover, a survey was carried out in order to measure the responses of students and instructors regarding the design method and its approach. The main structure of the design method proposed can be described as follows: although the relationship of concept articulation and design-problem definition are reciprocal, the influence of one direction can be distinguished more than of the other direction on different design activities. The research using qualitative and quantitative methodologies analyzes the results and outputs of the theoretical investigations, the practical application in the design studio, and the questionnaire responses through different methodological tools.
keywords	Conceptual design, design method, architectural design studio
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ascaad2009_wael_abdelhameed
id	ascaad2009_wael_abdelhameed
authors	Abdelhameed, Wael
year	2009
title	Assessment of a Physical Planning Project through Virtual Reality: A case study
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 365-378
summary	The study reports an application of VR models in the assessment of a part of physical planning project. The project outputs were different reports, GIS data and maps, and CAD drawings. The GIS data were used to create the VR models by importing Shpfiles of the GIS project outputs to VR software. The study presents VR models and the assessment of the physical planning project in terms of: 1) effect of the population increase, 2) effect of the required residential units, and 3) quality assurance for the current situation and future situation. The method used to build up the VR Models was through satellite images (by Google Earth Pro) and VR software (by UC Win/Road). Different models were built up to visualize and assess the alternative solutions and various influential factors. The study employed Virtual Reality in various urban and planning problems through models that are employed as tools of communication and design. The visualized environment and the associated models facilitated the evaluation of important areas, namely: impact of different factors and alternative solutions. The study concludes that the processes, such as decision making, visualization and representation, performed through VR manifest its importance to different design phases of urban and physical planning.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2009_000
id	ascaad2009_000
authors	Abdelhameed, Wael; N. Hamza and A. Bennadji (eds.)
year	2009
title	Digitizing Architecture: Formalization and Content
source	4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009)[ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, 463 p.
summary	CAAD is constantly provoking and raising many potentials, challenges and arguments in academia, practice, and even in the theory of architecture itself. This process starts with the pedagogy of designing and the ongoing questions such as how much of CAAD should be incorporated in teaching, and ends with digital design technologies and the new emerging questions such as how biologically inspired computational processes alter the form of our architecture and the typical design process. Architecture originates from peoples’ needs and beliefs. The new forms of digital architecture generate debates in terms of various important issues, ranging from emotional and social factors to sustainability and warming climate. The focus area of the conference can be shaped, as follows: considering all these potentials, challenges, and arguments, which we have to benefit from and cope with, are there truly legitimate concerns about the future of our architecture and its content in particular from human and environmental dimensions? Can we develop our own ways of benefiting from the technology that cater to our environment and culture? Can we still see the form of architecture in the traditional way or should we change our perspectives? In other words the conference concentrates on bridging between the new digital form and the traditional human content.
series	ASCAAD
type	normal paper
email
last changed	2010/02/26 07:31

_id	sigradi2009_1086
id	sigradi2009_1086
authors	Abdelhameed, Wael; Yoshiro Kobayashi
year	2009
title	Urban Wiki: An online urban design system
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This research involves the framework and design of Urban Wiki, an online urban design system employing Wiki concept. The term Urban Wiki is created by the researchers; its concepts and methodology will be introduced and presented. Urban Wiki aims to creating a networking system of urban designs, enabling the collaborative work between users around the world. The presented system framework is created and tested by the researchers from two different locations in the world. The purpose of the research is to study how the users can share effectively designing/modeling large scale urban projects. An urban project of a village scale is used to demonstrate the potentials of Urban Wiki, presenting its functions and highlighting the possible uses in the urban area. Moreover, using the created models opens up various urban paths of designing, decision-making, and sharing. Techniques employed in the design of Urban Wiki can potentially be used to build up scalable, easily navigable and extensible models of large-scale entities.
keywords	Urban design; urban planning; networking; urban wiki; modeling systems
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2009_273
id	cf2009_273
authors	Abdelmohsen, Sherif M. and Do, Ellen Yi-Luen
year	2009
title	Analysing the significance of problem solving expertise and computational tool proficiency in design ideation
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 273-287
summary	This paper presents a pilot study to analyze the role of problem solving expertise (PSE) and computational tool proficiency (CTP) of expert and novice architects in the ideation process within a distributed cognition environment. To analyze PSE, we studied the frequency of occurrence of unique problem solving tasks per limited commitment mode (LCM) revisit. We also devised a quantitative measure for analyzing CTP based on the frequency of unique and normally distributed modeling activities per design process flows for a parametric modeling tool. In our study that involved freehand sketching and parametric modeling as two external representations used in the ideation process, we concluded that expert architects have higher levels of both PSE and CTP than novices.
keywords	Problem solving, distributed cognition, design ideation, parametric modeling, freehand sketching
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ee30
id	ee30
authors	Abdelmohsen, Sherif; El-Khouly, Tamer
year	2009
title	Representing Reflective Practice in a Remote Design Collaboration Process
source	Digital proceedings of the 3rd Conference of International Association of Societies of Design Research (IASDR 2009), COEX, Seoul, Korea, pp. 1317 – 1326.
summary	This paper addresses a new method to describe the remote collaborative design process from the perspective of reflective practice. We aim at understanding the mutual effect between internal and external structures in remote collaborative design. According to the cognitive coding scheme of Suwa et al., we encoded the process into a set of indices—new, continual and revisited—that describe each primitive design move. In a case study which involved the authors as design collaborators, we identified the degree of dependency among these moves and developed a 3D graphical representation to account for reflective practice between us as collaborators. In this representation, we re-interpreted our collaborative process through three main axes: axis of idea exchange as lateral component, axis of idea development as vertical component, and axis of dependency as depth component. We believe this representation can be used to re-interpret the collaboration process among geographically dispersed design team members.
keywords	Collaborative design, reflective practice, collective reflection-in-action, cognitive actions, design moves, dependency relationships, remote collaboration
series	other
type	normal paper
email
last changed	2010/01/30 07:26

For more results click below: