Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 4379

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2010_62
id	sigradi2010_62
authors	Monteiro, de Menezes Alexandre; Silva Viana Maria de Lourdes; Pereira Junior Mário Lucio; Palhares Sérgio Ricardo
year	2010
title	A eficiência da comunicação gráfica digital na etapa de projeto e seu reflexo na construção de uma edificação [The efficiency of digital graphic communication at the proeject stage and its impact on the construction of a building]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 62-65
summary	This research studies digital technology in graphic communication among professionals in building design, and its reflection in construction. There is evidence of difficulties caused by interference among the participants involved in building projects, resulting in rework, construction waste and discontent. The effectiveness of graphic communication among professionals is related to the efficiency of constructions. This research has identified procedures in the establishment of projects that contribute positively, or not, to the quality of graphic communication among professionals. After listing these procedures, the research identified their reflections in construction. The results confirm that it is possible to identify positive and negative consequences of graphic communication procedures among professionals involved in building construction.
keywords	graphic digital communication; building project; building construction
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2010_351
id	sigradi2010_351
authors	Stumpp, Monika Maria; Elísia da Costa Ana; Radunz Roberto; Pinheiro Machado Maria Beatriz
year	2010
title	Patrimônio e mídia interativa: as residências modernas na Serra Gaúcha_Brasil [Heritage and interactive media: moder homes at Serra Gaucha in Brazil]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 351-354
summary	This article presents the results of a study that is being carried out at the University of Caxias do Sul, Brazil. The goal of the study is to publicize a collection of the modern architecture in southern Brazil through interactive media on a web portal. This study presents the development of a digital media to publicize a collection composed of single - family houses, for a total of two - hundred - and - fifteen residences that are organized by city and decade, from 1930 to 1970. The buildings of each decade are analyzed in terms of their language and compositional features. It also presents brief biographies of the architects, engineers and builders involved in the construction.
keywords	cultural heritage, hypermedia, modern residences
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	caadria2011_023
id	caadria2011_023
authors	Champion, Erik M. and Andrew Dekker
year	2011
title	Indirect biofed architecture: Strategies to best utilise biofeedback tools and interaction metaphors within digital architectural environment
doi	https://doi.org/10.52842/conf.caadria.2011.241
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 241-250
summary	This paper explains potential benefits of indirect biofeedback used within interactive virtual environments, and reflects on an earlier study that allowed for the dynamic modification of a virtual environment’s graphic shaders, music and artificial intelligence (of Non Playing Characters) based on the biofeedback of the player. It then examines both the potential and the issues in applying biofeedback (already effective for games) to digital architectural environments, and suggests potential uses such as personalization, object creation, atmospheric augmentation, filtering, and tracking.
keywords	Virtual worlds; biofeedback; sensors; empathy theory
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2010_039
id	ascaad2010_039
authors	Almusharaf, Ayman M.; Mahjoub Elnimeiri
year	2010
title	A Performance-Based Design Approach for Early Tall Building Form Development
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 39-50
summary	This paper presents a methodological interactive design approach within which structure is integrated into tall building form development. The approach establishes a synergy between generative and analytical tools to allow for parallel interaction of the formal and structural design considerations during the conceptual design phase. An integration of the associative modeling system, Grasshopper, and the structural analysis tool, ETABS was established, and a bi-directional feedback link between the two tools was initiated to guide the iterative from generation process. A design scenario is presented in this paper to demonstrate how the parametric generation and alteration of architectural form can be carried out based on instant feedback on the structural performance. Utilizing such a tool, architects can not only develop improved understanding of structural needs, but also realize their formal ideas structurally and materially.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ecaade2010_229
id	ecaade2010_229
authors	Aschwanden, Gideon D. P. A.; Wullschleger, Tobias; Müller, Hanspeter; Schmitt, Gerhard
year	2010
title	Agent based Emission Evaluation of Traffic in Dynamic City Models
doi	https://doi.org/10.52842/conf.ecaade.2010.717
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.717-726
summary	We present a simulation platform to evaluate procedurally generated 3d city models with a set of agents representing urban street actors and pedestrians towards greenhouse gas emissions from transportation. Our aim is to give architects and urban planners an empiric tool to analyze, predict and quantify traffic fluctuations over time, and define the number of occupants, individual traffic and public transport in a city. In this project we show that the allocation of functions within a city is an important factor for the appearanceof traffic. The occupant’s decisions where they want to go are defined by the allocation of functions – and the distance defines the mode of transportation. We simulate the decision processes and gain information about the path, the mode of transportation, and the emissions they produce, and individual experiences like stress and effort. The autonomous driving cars are equipped with an acceleration based emission model allowing us to evaluate the inpact of jammed streets on the emission of cars.
wos	WOS:000340629400077
keywords	Urban planning; Multi-agent system; Generative city model; Occupant movement; Traffic emission
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia22_128
id	acadia22_128
authors	Azel, Nicolas; Pachuca, Brandon; Wilson, Lucien
year	2022
title	Closing the Gap
source	ACADIA 2022: Hybrids and Haecceities [Proceedings of the 42nd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. University of Pennsylvania Stuart Weitzman School of Design. 27-29 October 2022. edited by M. Akbarzadeh, D. Aviv, H. Jamelle, and R. Stuart-Smith. 128-137.
summary	This paper shares KPF Cloud Tools, a platform for using Rhino Compute (McNeel’s REST API for RhinoCommon and Grasshopper) to run a library of Grasshopper tools through a cloud server via a Rhino plugin with a procedurally generated user interface, making it quick to deploy new tools (Robert McNeel & Associates 2010). We describe the professional challenges that the KPF Cloud Tools platform solves, document the technical implementation of the platform, and illustrate its benefit through the impact on a large architectural practice.
series	ACADIA
type	paper
email
last changed	2024/02/06 14:00

_id	sigradi2010_92
id	sigradi2010_92
authors	Barcellos, Góes Mariza; Menezes Alexandre
year	2010
title	O ensino de projeto de arquitetura: transições e desafios na sala de aula contemporânea [Teaching architecture design: transitions and challenges in the contemporary classroom]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 92-95
summary	This article presents an ongoing research project, the main aim of which is to investigate the teaching of architectural design, as well as to deepen the discussion on the role of drawing and architectural representation in the teaching and learning processes. The research conducts studies with design teachers through interviews and systematic classroom monitoring of architecture and urbanism courses. The theoretical frameworks that support this research and that are being used in the educational area to observe and understand practice are activity theory and situated learning.
keywords	design teaching and learning; design processes; drawing; sketches
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2010_043
id	caadria2010_043
authors	Barker, Tom and M. Hank Haeusler
year	2010
title	Urban digital media: facilitating the intersection between science, the arts and culture in the arena of technology and building
doi	https://doi.org/10.52842/conf.caadria.2010.457
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 457-466
summary	The research presented in this paper investigates ways of providing better design applications for technologies in the field of Urban Digital Media (UDM). The work takes an emergent approach, evolving a design strategy through the early engagement of stakeholders. The paper discusses research in a design-led creative intersection between media technology, culture and the arts in the built environment. The case study discusses opportunities for the enhancement of a university campus experience, learning culture and community, through the provision of an integrated digital presence within campus architecture and urban spaces. It considers types of information architecture (Manovich, 2001) and designs for use in urban settings to create communication-rich, advanced and interactive designed spaces (Haeusler, 2009). The presented research investigates how to create a strategy for display technologies and networked communications to transform and augment the constructed reality of the built environment, allowing new formats of media activity.
keywords	Urban design; outdoor digital media; information architecture; multidisciplinary design; augmented reality; media facades
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2010_000
id	ascaad2010_000
authors	Bennadji, Amar; Bhzad F. Sidawi & Rabee M. Reffat (eds.)
year	2010
title	CAAD - Cities - Sustainability
source	5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010)[ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, 361 p.
summary	The concepts and applications of Computer Aided Architectural Design (CAAD) have a predominant presence and impacts on our today’s buildings and cities. The 5th international ASCAAD conference invited academics, researchers and professionals interested in CAAD concepts applications on the built environment to join and contribute to the debate on learned lessons from the past and present impacts of CAAD on buildings and cities around the world along with the potential future from a CAAD perspective.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	sigradi2010_104
id	sigradi2010_104
authors	Borda, Adriane; De Freitas Pires Janice; Dalla Vecchia Luisa; Celani Gabriela
year	2010
title	Produção e compartilhamento de objetos de aprendizagem dirigidos ao projeto de arquitetura [Production and sharing of learning objects, aimed at architecture desing projects]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 104-107
summary	Didactic material in digital format is being produced in different contexts focused on similar themes. The efforts of such production are not being optimized. This paper describes the structuring process of a system of collaborative production of didactic material aimed at broadening geometric vocabulary and repertory in architecture. Established material regarding this theme is analyzed through the concept of learning objects. Efforts concentrate on the establishment of a taxonomy to characterize these objects, seeking to make the search and selective recovery of these objects easier. An environment has been made available for sharing, discussion and validation of this material, outlining a methodology for the establishment of the proposed system.
keywords	architecture; information and communication technologies; sharing; didactic material; taxonomy
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2010_264
id	sigradi2010_264
authors	Cardoso, Eduardo; de Vargas Scherer Fabiano
year	2010
title	O uso de modelos virtuais e físicos no ensino de projeto integrado de sistemas de sinalização e mobiliário urbano [The use of virtual and physical models in design teaching: sygnal systems and urban furniture]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 264-267
summary	This article presents the Integrated Project I class at the Federal University of Rio Grande do Sul which covers design of signage systems and urban furniture of the undergraduate courses of product design and visual design. This work presents the objectives of the discipline, as well as the methodology, applications and importance of physical and virtual models in the development process of signage and urban furniture, beginning with the stages of creation to development, detailing and implementation.
keywords	CAD; CAM; prototyping; signage; urban furniture
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2010_201
id	sigradi2010_201
authors	Chiarella, Mauro; Tosello María Elena
year	2010
title	Laboratorio de Representación e Ideación (RI.Lab10) [Representation and Ideation Lab (RI.Lab10)]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 201-204
summary	The Laboratory of Representation and Ideation (RI.Lab10) operates under the assumption that the different representations used in architecture create, modify and/or confirm different interpretation methods and mechanisms of perception, along with the information they produce. Architectonic representation allows us to understand and assess relationships between the tools used in a project and their resulting architectonic forms, which are placed within the context of social structures and cultural paradigms where they are developed. The main objective of such didactic experiences is to adapt available technological resources—in a strategic and integrative fashion—to expand the resources and capacities of the complex systems that intervene in the act of projecting architecture.
keywords	representation, ideation, disruption
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	sigradi2010_260
id	sigradi2010_260
authors	Christakou, Evangelos D.
year	2010
title	Luz natural: avaliação dinâmica e interativa nos ambientes arquitetônicos virtuais [Natural light: assessment in dynamic and interactive virtual architectural environments]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 260-263
summary	Real time walkthrough is a valuable resource, especially in the early stages of the design process. Assessing how shadows and reflections behave enables architects to make better choices regarding materials, geometry and lighting. Traditional methods do not offer daylight simulations in real time, whereas interactive visualization requires large computational resources to allow an evaluation of behavior of light in architectural space. This project researched virtual environments that permit the real - time generation of interactive scenes that simulate natural light algorithms modeled. The goal of this is to meet the needs of architects when evaluating the changes of a dynamic and synchronous project.
keywords	computer simulation, real - time rendering, architectural walkthrough
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	sigradi2010_121
id	sigradi2010_121
authors	Cújar, Vertel Angélica del Carmen; Soto de la Vega Diego Armando; Chica Urzola Juan Ángel
year	2010
title	Objeto virtual de aprendizaje para la didáctica en la enseñanza de modelos M;M;1: infinito y M;M;s: infinito [Virtual learning object for didactics in model teaching: M/M/1: infinite, and M/M/s: infinite]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 121-124
summary	This project presents a virtual learning object (VLO) to be used as systematic tool and virtual Adobe Flash Player, which allows both the public and exhibitors to see more clearly the subject at hand. The study material is based on queuing theory, and will explore a waiting line M/M/1 and infinite population characteristics, which are then transformed to a type M/M/S with infinite population to keep the system charged and to analyze the behavior of management indicators in each case.
keywords	virtual learning object, simulation, queuing theory
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	sigradi2010_347
id	sigradi2010_347
authors	de Souza, Santos Taís; Leão de Amorim Arivaldo
year	2010
title	Modelos dinâmicos para visualização arquitetônica e urbana: limites e possibilidades [Dynamic models for urban and architectural visualization: limits and possibilities]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 347-350
summary	In this article we discuss the use of photographic panoramas in the capture of urban space and architecture. The picture is a dynamic and interactive model, which has been used as a tool that assists the apprehension of space, due to its high level of realism. When associated with the virtual tour, this tool is potentialized due to the amount of information that can be added to the application. To illustrate this analysis, two examples were offered at different scales: one aimed at the capture of urban spaces and the second aimed at architectural spaces. In doing so it was possible to compare results and discuss the potential of the tool.
keywords	dynamic models; urban visualization, interactivity, virtual tour, photographic panoramas
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	acadia20_464
id	acadia20_464
authors	Elberfeld, Nathaniel; Tessmer, Lavender; Waller, Alexandra
year	2020
title	A Case for Lace
doi	https://doi.org/10.52842/conf.acadia.2020.1.464
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 464-473.
summary	Textiles and architecture share a long, intertwined history from the earliest enclosures to contemporary high-tech tensile structures. In the Four Elements of Architecture, Gottfried Semper (2010) posited wickerwork and carpet enclosures to be the essential origins of architectural space. More recently, architectural designers are capitalizing on the characteristics of textiles that are difficult or impossible to reproduce with other material systems: textiles are pliable, scalable, and materially efficient. As industrial knitting machines join robotic systems in architecture schools with fabrication- forward agendas, much of the recent developments in textile-based projects make use of knitting. In this paper, we propose an alternative textile technique, lacemaking, for architectural fabrication. We present a method for translating traditional lacemaking techniques to an architectural scale and explore its relative advantages over other textiles. In particular, we introduce bobbin lace and describe its steps both in traditional production and at an architectural scale. We use the unique properties of bobbin lace to form workflows for fabrication and computational analysis. An example of computational analysis demonstrates the ability to optimize lace-based designs towards particular labor objectives. We discuss opportunities for automation and consider the broader implications of understanding a material system relative to the cost of labor to produce designs using it.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ecaade2010_053
id	ecaade2010_053
authors	Felasari, Sushardjanti; Peng, Chengzhi
year	2010
title	Enhancing A Virtual City with Collective Memory: A pilot study of Jalan Malioboro in Yogyakarta
doi	https://doi.org/10.52842/conf.ecaade.2010.825
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.825-831
summary	The paper reports on a pilot study of how a virtual city can be enhanced by interlinking elements of the 3D city model with the city’s collective memory represented in various digital formats. A particular street called Jalan Malioboro in Yogyakarta Indonesia has been modeled and hosted on Google Earth. Through the questionnaires returned by the participating students, we also investigate how collective memory enhanced virtual city (CREATI) could help learners to achieve goals of a particular course. The study shows that CREATI helps students to analyze the task given by providing more historical information related to the street. However it also needs further refinement and evaluation by introducing more interactive features such as enabling students to upload their own design proposals and to post additional information related to the buildings or places.
wos	WOS:000340629400088
keywords	City modeling; Collective memory; Virtual city; Google Earth; Architectural and urban design; Jalan Malioboro; e-Learning
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2010_193
id	sigradi2010_193
authors	Fernández, Mónica Inés; Bonvecchi Liliana
year	2010
title	Disrupciones ornamentales en los procesos de creación digital [Ornamental disruptions in digital creation processes]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 193-196
summary	This work is motivated by changes in architecture due to the influence of digital technologies. It is aimed at defining a theoretical framework that depends on the value of the ornament and disruption caused by digital technologies, a key catalyst in the contemporary poetic of architectural envelopes.
keywords	architectural ornament, disruptive poetic, digital technology, materialization
series	SIGRADI
email
last changed	2016/03/10 09:51

For more results click below: