Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1745

Reformat results as: short short into frame detailed detailed into frame

_id	ijac20108202
id	ijac20108202
authors	Apollonio, Fabrizio I.; Cristiana Corsi, Marco Gaiani, Simone Baldissini
year	2010
title	An Integrated 3D Geodatabase for Palladio's Work
source	International Journal of Architectural Computing vol. 8 - no. 2, 111-133
summary	The paper presents a novel digital 3D GIS web-based system entirely founded on Google Earth, built to offer a deep insight into Palladio's opera for restitution of its architectural surveys, reconstruction for historical reasons, analysis for structural and other options, and assembly and presentation of all certified Palladian documentation.The development of the application follows the philosophy of visual computing and it is based on an architectural knowledge representation.The information system is conceived as a typical Rich Internet Application and it is based on the digitalization of the complete Palladian corpus documentation implemented by the Centro Internazionale di Studi di Architettura Andrea Palladio (CISAAP).The 3D geodatabase system is, actually, in use at the Centro as the Palladian information system for researchers and in two expositions at Barbaran da Porto Palace in Vicenza, and at Villa Poiana at Poiana Maggiore, where is widely used by tourists for virtual visits to Palladian buildings.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2010_114
id	ecaade2010_114
authors	Apollonio, Fabrizio I.; Gaiani, Marco; Corsi, Cristiana
year	2010
title	A Semantic and Parametric Method for 3D Models used in 3D Cognitive-Information System
doi	https://doi.org/10.52842/conf.ecaade.2010.863
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.863-872
summary	The paper presents an innovative semantic and parametric method to build 3D models to be used in cognitive-information systems. We integrated structured geometrical and documentary information resulting from multiple sources with the aim to enhance the knowledge of those sites within the frame of their historical evolution and their institutional management in a 3D GIS/DB. The developed applications were designed for different types of users, with a largely scalable interface, able to support different output devices and to work at different levels of iconicity. The system allows a full comprehension of the buildings in their own context, permitting to discover unknown relationships, to evaluate their architectural occupancy and to quickly access a complex system of information.
wos	WOS:000340629400092
keywords	3D-GIS; Semantic modeling; 3D reality-based modeling; Real-time rendering; Virtual heritage
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2010_197
id	sigradi2010_197
authors	Bustos, L Gabriela I.
year	2010
title	Epistemología compleja de diseño arquitectónico con tecnología digital: primera generación en un taller virtual [Complex epystemology in architecture design with digital technologies: first generation at a virtual workshop]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 197-200
summary	The goal of this paper—part of a doctoral dissertation—is to define a complex epistemology of design that uses digital technology by using Edgar Morin’s study of the theory of complexity to illustrate the concepts of principles and complex paradigms in architectonic design. This paper also establishes the position of digital technology as it is strategically applied in design education in the Architectonic Project I Workshop in the FAD LUZ with participation in Las Americas Virtual Design Studio 2009.
keywords	digital technology, complex epistemology, architectural designs
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2010_264
id	sigradi2010_264
authors	Cardoso, Eduardo; de Vargas Scherer Fabiano
year	2010
title	O uso de modelos virtuais e físicos no ensino de projeto integrado de sistemas de sinalização e mobiliário urbano [The use of virtual and physical models in design teaching: sygnal systems and urban furniture]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 264-267
summary	This article presents the Integrated Project I class at the Federal University of Rio Grande do Sul which covers design of signage systems and urban furniture of the undergraduate courses of product design and visual design. This work presents the objectives of the discipline, as well as the methodology, applications and importance of physical and virtual models in the development process of signage and urban furniture, beginning with the stages of creation to development, detailing and implementation.
keywords	CAD; CAM; prototyping; signage; urban furniture
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	caadria2010_000
id	caadria2010_000
authors	Dave, Bharat; Andrew I-kang Li, Ning Gu and Hyoung-June Park
year	2010
title	CAADRIA2010: New frontiers
doi	https://doi.org/10.52842/conf.caadria.2010
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, 644p.
summary	The ideas and projects described in papers on the following pages provide one snapshot of current research in computer-aided architectural design from around the world. The papers explore the field from diverse perspectives, emphasise different foci, employ a range of methodologies, and demonstrate many different ways in which designs and designing can be construed, understood and supported using digital tools and technologies. The notion of frontiers in this collection of papers reflects not just a quest for new problems but also a reassessment of what we already know, not just what is conventionally understood as design in terms of tangible material configurations but also what may exist only as processes or as immaterial and virtual representations.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	acadia10_110
id	acadia10_110
authors	Di Raimo; Antonino
year	2010
title	Architecture as Caregiver: Human Body - Information - Cognition
doi	https://doi.org/10.52842/conf.acadia.2010.110
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 110-116
summary	Recent studies in contemporary architecture have developed a variety of parameters regarding the information paradigm which have consequently brought different results and techniques to the process of architectural design. Thus, the emergence of an ecological thinking environment and its involvement in scientific matters has determined links moving beyond the conventional references that rely on information. It is characterized as an interconnected and dynamic interaction, concerning both a theoretical background and providing, at the same time, appropriate means in the architectural design process (Saggio, 2007, 117). The study is based on the assumption that Information Theory leads into a bidirectional model which is based on interaction. According to it, I want to emphasize the presence of the human body in both the architectural creation process and the use of architectural space. The aim of my study, is consequently an evaluation of how this corporeal view related to the human body, can be organized and interlinked in the process of architectural design. My hypothesis relies on the interactive process between the information paradigm and the ecological one. The integration of this corporeal view influences the whole process of architectural design, improving abilities and knowledge (Figure 1). I like to refer to this as a missing ring, as it occurs within a circular vital system with all its elements closely linked to each other and in particular, emphasizes architecture as a living being.
keywords	Architecture, information paradigm, human body, corporeity, cognitive Science, cognition,circularity, living system
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	acadia20_464
id	acadia20_464
authors	Elberfeld, Nathaniel; Tessmer, Lavender; Waller, Alexandra
year	2020
title	A Case for Lace
doi	https://doi.org/10.52842/conf.acadia.2020.1.464
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 464-473.
summary	Textiles and architecture share a long, intertwined history from the earliest enclosures to contemporary high-tech tensile structures. In the Four Elements of Architecture, Gottfried Semper (2010) posited wickerwork and carpet enclosures to be the essential origins of architectural space. More recently, architectural designers are capitalizing on the characteristics of textiles that are difficult or impossible to reproduce with other material systems: textiles are pliable, scalable, and materially efficient. As industrial knitting machines join robotic systems in architecture schools with fabrication- forward agendas, much of the recent developments in textile-based projects make use of knitting. In this paper, we propose an alternative textile technique, lacemaking, for architectural fabrication. We present a method for translating traditional lacemaking techniques to an architectural scale and explore its relative advantages over other textiles. In particular, we introduce bobbin lace and describe its steps both in traditional production and at an architectural scale. We use the unique properties of bobbin lace to form workflows for fabrication and computational analysis. An example of computational analysis demonstrates the ability to optimize lace-based designs towards particular labor objectives. We discuss opportunities for automation and consider the broader implications of understanding a material system relative to the cost of labor to produce designs using it.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	sigradi2010_189
id	sigradi2010_189
authors	Hernández, Silvia Patricia; Verón María José; Figeroa Luciana Lanzone; Alejandra Rezk
year	2010
title	Arquitectura que aparece - desaparece: experiencia de diseño [Architecture tha appears and dissapear: an experience in design]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 189-192
summary	We present this paper as a proposal for a preliminary design prototype for urban architecture based on the concept of versatility, that is, spaces that can be easily changed, either on the effects level (i.e. illumination, projection), or on the mechanical level (i.e. skin movement). These spaces can be transformed by changing their proportions, limits and assistance. This versatility is provided by domotics, and is verified in 3D graphics and animations. The proposal uses a domotic system as the central control for illumination, environment outfitting, skin movements, security systems, and multimedia.
keywords	versatility, domotics, animation, movable skins
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	cf2011_p027
id	cf2011_p027
authors	Herssens, Jasmien; Heylighen Ann
year	2011
title	A Framework of Haptic Design Parameters for Architects: Sensory Paradox Between Content and Representation
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 685-700.
summary	Architects‚Äîlike other designers‚Äîtend to think, know and work in a visual way. In design research, this way of knowing and working is highly valued as paramount to design expertise (Cross 1982, 2006). In case of architecture, however, it is not only a particular strength, but may as well be regarded as a serious weakness. The absence of non-visual features in traditional architectural spatial representations indicates how these are disregarded as important elements in conceiving space (Dischinger 2006). This bias towards vision, and the suppression of other senses‚Äîin the way architecture is conceived, taught and critiqued‚Äîresults in a disappearance of sensory qualities (Pallasmaa 2005). Nevertheless, if architects design with more attention to non visual senses, they are able to contribute to more inclusive environments. Indeed if an environment offers a range of sensory triggers, people with different sensory capacities are able to navigate and enjoy it. Rather than implementing as many sensory triggers as possible, the intention is to make buildings and spaces accessible and enjoyable for more people, in line with the objective of inclusive design (Clarkson et al. 2007), also called Design for All or Universal Design (Ostroff 2001). Within this overall objective, the aim of our study is to develop haptic design parameters that support architects during design in paying more attention to the role of haptics, i.e. the sense of touch, in the built environment by informing them about the haptic implications of their design decisions. In the context of our study, haptic design parameters are defined as variables that can be decided upon by designers throughout the design process, and the value of which determines the haptic characteristics of the resulting design. These characteristics are based on the expertise of people who are congenitally blind, as they are more attentive to non visual information, and of professional caregivers working with them. The parameters do not intend to be prescriptive, nor to impose a particular method. Instead they seek to facilitate a more inclusive design attitude by informing designers and helping them to think differently. As the insights from the empirical studies with people born blind and caregivers have been reported elsewhere (Authors 2010), this paper starts by outlining the haptic design parameters resulting from them. Following the classification of haptics into active, dynamic and passive touch, the built environment unfolds into surfaces that can act as ‚Äúmovement‚Äù, ‚Äúguiding‚Äù and/or ‚Äúrest‚Äù plane. Furthermore design techniques are suggested to check the haptic qualities during the design process. Subsequently, the paper reports on a focus group interview/workshop with professional architects to assess the usability of the haptic design parameters for design practice. The architects were then asked to try out the parameters in the context of a concrete design project. The reactions suggest that the participating architects immediately picked up the underlying idea of the parameters, and recognized their relevance in relation to the design project at stake, but that their representation confronts us with a sensory paradox: although the parameters question the impact of the visual in architectural design, they are meant to be used by designers, who are used to think, know and work in a visual way.
keywords	blindness, design parameters, haptics, inclusive design, vision
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2010_004
id	caadria2010_004
authors	Jowers, Iestyn; Miquel Prats, Hesham Eissa and Ji-Hyun Lee
year	2010
title	A study of emergence in the generation of Islamic geometric patterns
doi	https://doi.org/10.52842/conf.caadria.2010.039
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 39-48
summary	Generative design is concerned with the definition and exploration of design spaces, and it has been suggested that emergence plays a key role in this process. In this paper, the impact of emergence on a design space is explored via consideration of different methods used to generate designs in a particular style. Three distinct methods of generating Islamic geometric patterns have been investigated and the extent to which emergence is employed in these methods has been explored. This research supports a discussion on the role of emergence in generative design, and an investigation into how design spaces are affected by the type of emergence employed in a generative process.
keywords	Islamic geometric patterns; emergence; design space; design generation
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2020_023
id	caadria2020_023
authors	Liu, Chenjun
year	2020
title	Double Loops Parametric Design of Surface Steel Structure Based on Performance and Fabrication
doi	https://doi.org/10.52842/conf.caadria.2020.1.023
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 23-33
summary	In intelligent epoch, automatic parameter design systems reduce the requirements of the skills needed to create objects. The creator only needs to select the most perceptual primitive form to automatically generate the data system that iterates to the most efficient solution. In this paper, a method of combining performance driven optimization with parametric design is proposed. The iterative evolution is under the control of performance loop and fabrication loop, which makes all the data provided by parametric design in a practical project available for exploring structural analysis and digital prefabrication. Related to the case of surface steel structure, parametric optimization is not limited to a set of shape types or design problems, it would be based on the generality and built-in characteristics of parametric modelling environment in the most convenient and flexible way. (Rolvink et al. 2010)And the given parameters would be fed back on geometric structure, performance indicators, and design variables, so that designers can easily and effectively coordinate and try different solutions. The system transforms the generated data into machine language so that the process including design, analysis, manufacturing, and construction can maintain the orthogonal persistence of the data.
keywords	parametric design; component prefabrication; curved steel structure; performance driven
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	acadia10_81
id	acadia10_81
authors	Marcos, Carlos L.
year	2010
title	Complexity, Digital Consciousness and Open Form: A New Design Paradigm
doi	https://doi.org/10.52842/conf.acadia.2010.081
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 81-87
summary	Complexity as a result of improved design capabilities through the use of computer tools was introduced in the architectural debate since these became irreplaceable. On the other hand, not every designer is genuinely aware of the logical implications that the use of these tools may entail. Used as a simple emulation of enhanced traditional design tools—drawings and models, they do not alter the process of design significantly. However, the potential of such tools beyond their instrumentality introduces designers into the realm of digital consciousness. This paper analyzes complexity as an inherent quality of computer aided architectural design in relation to four different digitally conscious design strategies. First, the increase of complexity involved in digital architectural designs because of their potentiality to manage enormous amounts of differentiated information. Second, the complexity inherent to an open form such as parametric or generative designs may be defined. Third, the use of the computer as a smart partner involved in the design process —i.e., form finding strategies— rather than as a simple efficient machine able to repeat our abilities faster and more effectively in certain roles of the design process. Finally, it analyzes the possibility of generating parameterized typologies as a result of the openness of form, as well as the increased complexity that randomness may introduce in algorithmic design. The paper concludes with reflections on complexity vs. simplexity considering the fact that the simplicity characteristic of Modernism aesthetics and constructive values collide with the baroque formal complexity achieved in generative design.
keywords	Digital consciousness, complexity, added information, open form, form finding, randomness
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	cf2011_p110
id	cf2011_p110
authors	Mcmeel, Dermott
year	2011
title	I think Therefore i-Phone: The influence of Pervasive Media on Collaboration and Multi-Disciplinary Group Work
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 69-84.
summary	The study of value and its transfer during the multi-disciplinary process of design is stable fodder for research; an entire issue of Design Studies has been devoted to Values in the Design Process. By scrutinising design meetings Dantec (2009) and Ball (2009) separately examine the mechanisms of value transfer between the agents involved in design (clients, designers, engineers). Dantec suggests this is best understood in terms of requirement, values and narrative; Ball proposes it should be viewed as a combination of "analogical reasoning" and "environmental simulation". If we look at Vitruvius and his primary architectural manual (Pollio 1960) we find values‚Äîin the form of firmitas, utilitas and venustas‚Äîembedded in this early codification of architectural practice. However, as much current research is restricted to design practice what occurs when value frameworks move between domains of cultural activity (such as design to construction and vice-versa) is not privileged with a comparably sizable body of research. This paper is concerned with the ongoing usage of pervasive media and cellular phones within communications and value transfer across the disciplinary threshold of design and construction. Through participation in a building project we analyse the subtleties of interaction between analogue communication such as sketches and digitally sponsored communication such as e-mail and mobile phone usage. Analysing the communications between the designer and builder during construction suggests it is also a creative process and the distinctions between design and construction processes are complex and often blurred. This work provides an observational basis for understanding mobile computing as a dynamic ‚Äòtuning‚Äô device‚Äîas hypothesized by Richard Coyne (2010)‚Äîthat ameliorates the brittleness of communication between different disciplines. A follow up study deploys ‚Äòdigital fieldnotes‚Äô (dfn) a bespoke iPhone application designed to test further suppositions regarding the influence exerted upon group working by mobile computing. Within collaboration individual communiqu_©s have different levels of importance depending on the specific topic of discussion and the contributing participant. This project furthers the earlier study; expanding upon what mobile computing is and enabling us to infer how these emergent devices affect collaboration. Findings from these two investigations suggest that the synchronous and asynchronous clamour of analogue and digital tools that surround design and construction are not exclusively inefficiencies or disruptions to be expunged. Observational evidence suggests they may provide contingency and continue to have value attending to the relationship between static components‚Äîand the avoidance of failure‚Äîwithin a complex system such as design and construction.
keywords	collaboration, design, mobile computing, digital media
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ijac20108103
id	ijac20108103
authors	Narahara, Taro
year	2010
title	Designing for Constant Change: An Adaptable Growth Model for Architecture
source	International Journal of Architectural Computing vol. 8 - no. 1, 29-40
summary	Design of universal components that can tolerate technological, environmental, and circumstantial changes over time is a challenge for an architect. In this paper, I would like to propose a scaled prototype of architectural components that can reconfigure themselves into globally functional configurations based on feedback from locally distributed intelligence embedded inside the component. The project aims at demonstrating a design system that can respond to dynamically changing environment over time without imposing a static blueprint of the structure in a top-down manner from the outset of design processes. The control of the subunits are governed by the logic of a distributed system simulated by the use of multiple microcontrollers, and appropriate geometrical configurations will be computationally derived based on physical-environmental criteria such as solar radiation from various sensors and social-programmatic issues.
series	journal
last changed	2019/05/24 09:55

_id	caadria2010_040
id	caadria2010_040
authors	Neisch, P.
year	2010
title	Thai children’s participation in development of 3D virtual village
doi	https://doi.org/10.52842/conf.caadria.2010.423
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 423-431
summary	This paper present the process of virtual world’s adaptation to the vision of the real environment designed by the children of two primary Thai schools – a state school and a private school. The main point of the present paper is presentation of empirical research that is an analysis of four exercises – inquiries in which I asked children to draw the elements of their city and social life. The first task was to represent a route from home to school. Next, children were asked to draw the plan of their school, on which they had to differentiate the places dedicated to them, the common spaces and the spaces for another people. The last exercise done at school was related to the description of their family and their closest friends. At the end, the children were asked to draw an inside of their houses with the maximum of details. The results of representations of the daily life environments analysed and synthesised were rebuilt with the graphic computer tools. They will serve as the base of the conception of a 3D virtual village dedicated to the Thai children.
keywords	Virtual / real; children; inquiry; drawing; pedagogic platform
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	acadia20_668
id	acadia20_668
authors	Pasquero, Claudia; Poletto, Marco
year	2020
title	Deep Green
doi	https://doi.org/10.52842/conf.acadia.2020.1.668
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 668-677.
summary	Ubiquitous computing enables us to decipher the biosphere’s anthropogenic dimension, what we call the Urbansphere (Pasquero and Poletto 2020). This machinic perspective unveils a new postanthropocentric reality, where the impact of artificial systems on the natural biosphere is indeed global, but their agency is no longer entirely human. This paper explores a protocol to design the Urbansphere, or what we may call the urbanization of the nonhuman, titled DeepGreen. With the development of DeepGreen, we are testing the potential to bring the interdependence of digital and biological intelligence to the core of architectural and urban design research. This is achieved by developing a new biocomputational design workflow that enables the pairing of what is algorithmically drawn with what is biologically grown (Pasquero and Poletto 2016). In other words, and more in detail, the paper will illustrate how generative adversarial network (GAN) algorithms (Radford, Metz, and Soumith 2015) can be trained to “behave” like a Physarum polycephalum, a unicellular organism endowed with surprising computational abilities and self-organizing behaviors that have made it popular among scientist and engineers alike (Adamatzky 2010) (Fig. 1). The trained GAN_Physarum is deployed as an urban design technique to test the potential of polycephalum intelligence in solving problems of urban remetabolization and in computing scenarios of urban morphogenesis within a nonhuman conceptual framework.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia10_320
id	acadia10_320
authors	Rajus, Vinu Subashini; Woodbury, Robert; Erhan, Halil I.; Riecke, Bernhard E.; Mueller, Volker
year	2010
title	Collaboration in Parametric Design: Analyzing User Interaction during Information Sharing
doi	https://doi.org/10.52842/conf.acadia.2010.320
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 320-326
summary	Designers work in groups. They need to share information either synchronously or asynchronously as they work with parametric modeling software, as with all computer-aided design tools. Receiving information from collaborators while working may intrude on their work and thought processes. Little research exists on how the reception of design updates influences designers in their work. Nor do we know much about designer preferences for collaboration. In this paper, we examine how sharing and receiving design updates affects designers’ performances and preferences. We present a system prototype to share changes on demand or in continuous mode while performing design tasks. A pilot study measuring the preferences of nine pairs of designers for different combinations of control modes and design tasks shows statistically significant differences between the task types and control modes. The types of tasks affect the preferences of users to the types of control modes. In an apparent contradiction, user preference of control modes contradicts task performance time.
keywords	Parametric Design, Collaboration, Human Interaction
series	ACADIA
type	normal paper
email
last changed	2022/06/07 08:00

_id	lasg_hylozoicground_2010_fulltext
id	lasg_hylozoicground_2010_fulltext
year	2010
title	Hylozoic Ground; Liminal Responsive Architecture
source	Hylozoic Ground; Liminal Responsive Architecture [ISBN 978-1-926724-02-7] Riverside Architectural Press: Toronto, Canada 2010.
summary	Introductory summary of developing Hylozoic Series, a collection of life-like architectural structures
keywords	Hylozoism, Hylozoic series, components, assemblies, design process
last changed	2019/07/29 14:00

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2010_241
id	ascaad2010_241
authors	Aboreeda, Faten; Dina Taha
year	2010
title	Using Case-Based Reasoning to Aid Sustainable Design
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 241-246
summary	Since so far there exists only one planet, sustainable design is considered the (ethical) future in all fields of design. Although both architecture and construction are being considered major emitters of green house gases, a wise design not only can lead to minimizing this impact but it can also lead to restoring and regenerating the environment to a sustainable state. This paper presents an on-going research that aims at simplifying the elements and facilitating the process of sustainable design by using case-based reasoning. This is achieved through learning from past experiences; both good and bad ones, by providing a database application with a process-friendly interface which divides the main pillars of sustainable design into categories. Each building contains different stories related to different sustainable related issues. Each story can be repeated in /linked to many buildings. By providing designers with those past experiences, it is believed that deeper-studied designs can be more easily developed. Also a deeper analysis and understanding can be further implemented and produced with less effort for experienced and non-experienced architects in sustainable design. This would also decrease the consumption of time during the design process and encourage even more designers to integrate the sustainability concept into more designs. This research discusses the influence of sustainable design within the architectural domain, and suggests a computer application that aids architects during the preliminary design processes.
series	ASCAAD
email
last changed	2011/03/01 07:36

For more results click below: