Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 10198

Reformat results as: short short into frame detailed detailed into frame

_id	6de2
authors	Burnett, J. Jeffrey
year	1985
title	A Prototype Voice Operated Computer Aided Design Workstation Intended for High Productivity Commercial & Educational Use
doi	https://doi.org/10.52842/conf.acadia.1985.083
source	ACADIA Workshop ‘85 [ACADIA Conference Proceedings] Tempe (Arizona / USA) 2-3 November 1985, pp. 83-95
summary	The recent availability of easy to use, tow cost voice recognition input devices combined with increasingly sophisticated mini and micro-computer based Computer Aided Design (CAD) systems offer numerous possibilities for quadriplegics to enter (or re-enter) the job market as draft-persons and design professionals. Serious productivity potential needs much more study, however, preliminary benchmarks indicate that it would be reasonable to expect ratios of .9 to 1.4 over manual drafting using the configuration described.
series	ACADIA
last changed	2022/06/07 07:54

_id	acadia13_071
id	acadia13_071
authors	Burry, Jane; Salim, Flora; Williams, Mani; Anton Nielsen, Stig; Pena de Leon, Alex; Sharaidin, Kamil; Burry, Mark
year	2013
title	Understanding Heat Transfer Performance for Designing Better Façades
doi	https://doi.org/10.52842/conf.acadia.2013.071
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 71-78
summary	This early research focuses on the design of building façades to mediate external and internal thermal conditions. It explores new workflow for accessible feedback into the early design of façade systems. Specifically, this research aims to explore the level of corroboration or the gap between predictions of thermal behavior using digital modeling and simulation, and the empirical measurement of thermal behavior in physical analog models for façade design.
keywords	Tools and Interfaces: façade design, heat transfer, performance-based design, simulation, data visualization.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	0f49
authors	Burry, M., Coulson, J., Preston, J. and Rutherford, E.
year	2001
title	Computer-aided design decision support: interfacing knowledge and information
source	Automation in Construction 10 (2) (2001) pp. 203-215
summary	Computer-aided design decision support has proved to be an elusive and intangible project for many researchers as they seek to encapsulate information and knowledge-based systems as useful multifunctional data structures. Definitions of `knowledge', `information', `facts', and `data' become semantic footballs in the struggle to identify what designers actually do, and what level of support would suit them best, and how that support might be offered. The Construction Primer is a database-drivable interactive multimedia environment that provides readily updated access to many levels of information aimed to suit students and practitioners alike. This is hardly a novelty in itself. The innovative interface and metadata structures, however, combine with the willingness of national building control legislators, standards authorities, materials producers, building research organisations, and specification services to make the Construction Primer a versatile design decision support vehicle. It is both compatible with most working methodologies while remaining reasonably future-proof. This paper describes the structure of the project and highlights the importance of sound planning and strict adhesion to library-standard metadata protocols as a means to avoid the support becoming too specific or too paradigmatic.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	00e7
authors	Bushby, S.T.
year	1997
title	BACnetTM: a standard communication infrastructure for intelligent buildings
source	Automation in Construction 6 (5-6) (1997) pp. 529-540
summary	Intelligent buildings require integration of a variety of computer-based building automation and control system products that are usually made by different manufacturers. The exchange of information among these devices is critical to the successful operation of the building systems. Proprietary approaches to providing this communication have created great challenges for system integrators and hampered the development of intelligent building technology. Even though digital automation and control technology has been widely available for more than a decade and islands of automation are common, intelligent buildings with integrated building services are still more of a promise than a reality. BACnetTM is a standard communication protocol for building automation and control networks developed by the American Society of Heating, Refrigerating and Air-conditioning Engineers (ASHRAE, Standard 135-1995: BACnetTM--A Data Communication Protocol for Building Automation and Control Networks. American Society of Heating, Refrigerating, and Air-conditioning Engineers. Atlanta, Georgia, USA, 1995). BACnetTM provides the communication infrastructure needed to integrate products made by different vendors and to integrate building services that are now independent. This paper describes the main features of the BACnetTM protocol and early experience implementing it.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	1389
authors	Bustos, Gabriela L. and Burgos, Iván P.
year	2002
title	Desarrollo y Aplicabilidad de Menús Virtuales en VRML [Architectonic Development and Applicability of Virtual Menus in VRML]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 199-202
summary	The Virtual Reality Modeling Language (VRML), has allowed extend all of its resources and possibilities for Architectural Applications under the same Virtual Reality’s technology platform. In order to take advantages of its possibilities, this resource focus on exposes the development and application of virtual menus in VRML and Java Script as a first step for the creation of Synthetic Environment Laboratory in the faculty of Architecture and Design of University of Zulia, Venezuela. It presents in short, how algorithms were defined to design the menus, the use of a program in Visual Basic that permit addition of virtual menus toany WRL file, without any programming approach, as well as specific samples of applicability of the menus developed in a VRMLenvironment and how they are included in a methodological model of architectural design.
keywords	virtual reality, synthetic environments, architectural design, inmersive projection systems.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2020_253
id	ecaade2020_253
authors	Buš, Peter
year	2020
title	User-driven Configurable Architectural Assemblies - Towards artificial intelligence-embedded responsive environments
doi	https://doi.org/10.52842/conf.ecaade.2020.2.483
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 483-490
summary	The paper theoretically elaborates the idea of individual users' customisation activities to create and configure responsive spatial scenarios by means of reconfigurable interactive adaptive assemblies. It reflects Gordon Pask's concept of human and device interaction based on its unpredictable notion speculating a potential to be enhanced by artificial intelligence learning approach of an assembly linked with human activator's participative inputs. Such a link of artificial intelligence, human agency and interactive assembly capable to generate its own spatial configurations by itself and users' stimuli may lead to a new understanding of humans' role in the creation of spatial scenarios. The occupants take the prime role in the evolution of spatial conditions in this respect. The paper aims to position an interaction between the human agents and artificial devices as a participatory and responsive design act to facilitate creative potential of participants as unique individuals without pre-specified or pre-programmed goal set by the designer. Such an approach will pave a way towards true autonomy of responsive built environments, determined by an individual human agent and behaviour of the spatial assemblies to create authentic responsive built forms in a digital and physical space.
keywords	deployable systems; responsive assemblies; embedded intelligence; Learning-to-Design-and-Assembly method; Conversation Theory
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2014_520
id	caadria2014_520
authors	Cabrinha, Mark and Jeff Ponitz
year	2014
title	Composite FRP Unitized Façade Systems
doi	https://doi.org/10.52842/conf.caadria.2014.953
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 953–954
series	CAADRIA
type	poster
email
last changed	2022/06/07 07:54

_id	architectural_intelligence2023_19
id	architectural_intelligence2023_19
authors	Caiyu Li, Zihui Lv, Yang Geng, Hao Tang, Xiaobin Gu, Borong Lin & Wenwen Zhou
year	2023
title	A data-driven method for the optimal control of centralized cooling station in an office park
doi	https://doi.org/https://doi.org/10.1007/s44223-023-00040-1
source	Architectural Intelligence Journal
summary	An effective way to reduce the energy consumption of a building is to optimize the control strategy for the HVAC system. Load prediction is suggested and used to match the supply and demand for air conditioning and achieve energy savings. However, the gap between load prediction models and real-time optimal control of HVAC systems still exists. Hence, this paper proposed an optimization method for dynamically determining the best setpoints of chillers and chilled water pumps under a specific load. The energy consumption model of each equipment in the centralized cooling station is established and validated using the operational data. Then an optimization problem is defined to find the optimal setpoints for each equipment under certain load, to realize the lowest energy consumption. To verify the validity of the proposed method, a period of real operational data in an office park is used. The proposed method is applied on one centralized cooling station in the office park and results in an 4% lower overall energy consumption than the existing intelligent control strategies in the park. This method provides feasible directions and reference for realizing overall optimal control of the whole HVAC system in the future.
series	Architectural Intelligence
email
last changed	2025/01/09 15:03

_id	ddss9415
id	ddss9415
authors	Cajati, Claudio
year	1994
title	Innovative Expert Systems With Hypertextual User Interfaces: A Special Support for the Building Recovering Project
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In this paper, first of all a short account on the peculiarity of knowledge in the domain of Architectural and Building Project, particularly in the Building Recovering Project is given. Thatmeans to focus the concept of "degree of authority" of different types of knowledge with regard to project: regulations; specialist literature having in practice the value of self-regulation; technical updating; exemplary design cases; warnings; analysis methods; heuristics; orientating references. Consequently, the different roles of two basic design & decision support systems, that is expert systems and hypertexts, are considered. The former seem to be quite fit for representing information and knowledge linked to a clear "authority", the one of experts in a certain domain; the latter seem to be quite fit for illustrating the interdisciplinary complexity, different historicinterpretations, various analogous references, and so on. Afterwards, the limits of expert systems based on the logic "true-false" are underlined, and the perspective of expert systems based on more sophisticated and appropriate rules and metarules is proposed. At last, the possible structure of such an innovative expert system, with a hypertextual interface, in the domain of Building Recovering Project is exemplified.
series	DDSS
email
last changed	2003/08/07 16:36

_id	89d9
authors	Cajati, Claudio
year	1992
title	The New Teaching of an Architect: The Rôle of Expert Systems in Technological Culture
doi	https://doi.org/10.52842/conf.ecaade.1992.435
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 435-442
summary	We already have the EEC, that is the European Economic Community. We have to build the CCE, that is the Common Cultural Europe. Architects and building engineers of any european country will be allowed to freely practise in any other country of the EEC. Of course, it is not only matter of coming down of the frontiers, of a greater labour mobility. Not even it will be enough that the university degree courses of the different countries agree to and put into effect the EEC common directives. They need rules and guidelines entering into the merits of practice: rules and guidelines which, rather than a legal and bureaucratic matter, must be the result of a common cultural and technical work, about clear and delimited questions of shared subjects, in which all the community countries be deeply concerned. Analogously, in the very field of research, the project "Human Capital and Mobility" has in view a greater european scientific and technological competitiveness, through an integration of human and material resources of different research centres, such as in shared-cost research projects and in concerted research actions. Such an integration is neither easy nor rapid. The political, social, cultural, technological peculiarities of the countries of the European Community certainly constitute an obstacle for the creation of a supernational cultural and technological pool. of common opportunities. These peculiarities, however, aren't only a restraint for the european community effort of unification and construction of shared goals, constraints, rules, methods, techniques, tools. They mean also a richness, an unrepeatable resourse: they are the result of a historical millenary stratification, which gave rise to urban and architectural contexts, to cultural and technological traditions it would be a serious mistake to waste.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cb04
authors	Calderaro, V., Giangrande, A., Mirabelli, P. and Mortola, E.
year	1986
title	Decision Support Systems (DSS) in Computer Aided Architectural Design (CAAD)
doi	https://doi.org/10.52842/conf.ecaade.1986.020
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 20-38
summary	The paper describes a new procedure of design management and the results of its application to architectural design in an exercise developed in a didactic context. The procedure requires the participation of all “actors” (i.e. designers, experts, clients, users, etc.) involved in the design process and which contribute, directly or indirectly, to obtain the result. By generating and developing alternative design solutions, this procedure allows the exploration of a region of the performances space which is generally more vast than that explored by the traditional designer.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	1101
id	1101
authors	Calderon, C., Cavazza M. and Diaz, D.
year	2003
title	A NEW APPROACH TO THE INTERACTIVE RESOLUTION OF CONFIGURATION PROBLEMS IN VIRTUAL ENVIRONMENTS
source	3rd International Symposium on Smart Graphics, Heidelberg, Germany, 2-4, July 2003. http://www.smartgraphics.org/ . Proceedings published by Springer: Lectures notes in Artificial Intelligence.
summary	Intelligent Virtual Environments integrate AI techniques with 3D real-time environments. As such, they can support interactive problem solving, provided the underlying AI techniques can produce solutions within a time frame matching that of user interaction. In this paper, we describe an intelligent virtual environment based on Constraint Logic Programming (CLP), integrated in a real-time 3D graphic environment. We have developed an event-based ap-proach through which user interaction can be converted in real-time into appro-priate solver queries which are then translated back into automatic reconfigura-tions of the Virtual Environment (VE). Additionally, this framework supports the interactive exploration of the solution space in which alternative solutions (configurations) can be found. We demonstrate the system behaviour on a con-figuration example. This example illustrates how solutions can be interactively refined by the user through direct manipulation of objects in the VE and how the interactive search of alternative solutions in the VE is supported by these type of systems.
keywords	Artificial Intelligence, Virtual Environments, Constraint Programming
series	other
type	normal paper
email
last changed	2005/12/02 11:34

_id	88d3
id	88d3
authors	Calderon, C., Cavazza., M
year	2001
title	REACTIVE VIRTUAL ENVIRONMENTS IN BUILDING DESIGN
source	Proceedings: SCI 2001, The Fifth Multi-Conference on Systemics, Cybernetics and Informatics, Orlando, Florida, USA, July 22 - 25, 2001. http://www.iiis.org/sci/
summary	This paper presents the first prototype of a reconfigurable Virtual Environment (VE). The objective of the system is to link 3D Intelligent Virtual Environments to interactive planning systems. This type of system makes possible interactive solutions where the user refines a possible configuration and enables the system to generate a complete new solution enforcing all the design constraints, previously programmed. In this first prototype we link our constraint solver with the visualization engine so that the solution produced by the constraint solver is displayed in a VE.
keywords	Intelligent, Reactive, Virtual Environment, Spatial configuration tasks
series	other
type	normal paper
email
last changed	2005/12/02 11:12

_id	cff2
authors	Callen, John N.
year	1980
title	Man-Machine Interfaces and their Constraints within Interactive CAD
source	June, 1980. 18, [16] p. includes bibliography
summary	As CAD systems becomes more widely accepted in the design environment, the interaction between the designer and the system as supported by interfaces should be analyzed to insure the most natural means of communication. The purpose of this paper is to present various inherent constraints in users, CAD software/hardware and in the design process so that designers of CAD systems could more clearly recognize these constraints and produce a more suitable interface design
keywords	CAD, user interface, design, constraints
series	CADline
last changed	2003/06/02 10:24

_id	caadria2019_647
id	caadria2019_647
authors	Camacho, Daniel, Dobbs, Tiara, Fabbri, Alessandra, Gardner, Nicole, Haeusler, M. Hank and Zavoleas, Yannis
year	2019
title	Hands On Design - Integrating haptic interaction and feedback in virtual environments for enhanced immersive experiences in design practice.
doi	https://doi.org/10.52842/conf.caadria.2019.1.563
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 563-572
summary	The usability of virtual reality (VR) controller interfaces are often complex and difficult for first time users. Most controllers provide minimal feedback which relegates the potential for heightened interaction and feedback within virtual experiences. This research explores how haptic technology systems partnered with VR can deliver immersive interactions between user and virtual environment (VE). This research involves the development of a haptic glove interface prototype that incorporates a force feedback and vibrotactile feedback system. It focuses on determining a workflow that communicates in real-time user interaction and environmental feedback using Unreal Engine and the produced haptic glove system. Testing and calibrating the prototype feedback system provided a baseline for developers to rationalise and improve accuracy of current real-time virtual feedback systems. The evaluation of this research in industry unfolds new technical knowledge for implementing a wider range of haptic technologies within VR. This further development would involve reviewing the usability and interaction standards for VR users in the design process.
keywords	Virtual Environments; Haptic Technologies; Feedback; Interaction; Usability
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	0e58
authors	Campbell, D.A. and Wells, M.
year	1994
title	A Critique of Virtual Reality in the Architectural Design Process, R-94-3
source	Human Interface Technology Laboratory, University of Washington, Seattle, USA, http://www.hitl.washington.edu/publications/r-94-3/: 23 May 2001
summary	An addition to a building was designed using virtual reality (VR). The project was part of a design studio for graduate students of architecture. During the design process a detailed journal of activities was kept. In addition, the design implemented with VR was compared to designs implemented with more traditional methods. Both immersive and non-immersive VR simulations were attempted. Part of the rationale for exploring the use of VR in this manner was to develop insight into how VR techniques can be incorporated into the architectural design process, and to provide guidance for the implementers of future VR systems. This paper describes the role of VR in schematic design, through design development to presentation and evaluation. In addition, there are some comments on the effects of VR on detailed design. VR proved to be advantageous in several phases of the design. However, several shortcomings in both hardware and software became apparent. These are described, and a number of recommendations are provided.
series	other
email
last changed	2003/04/23 15:50

_id	ecaade2021_202
id	ecaade2021_202
authors	Campos, Tatiana, Cruz, Paulo J. S. and Figueiredo, Bruno
year	2021
title	The Use of Natural Materials in Additive Manufacturing of Buildings Components - Towards a more sustainable architecture
doi	https://doi.org/10.52842/conf.ecaade.2021.1.355
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 1, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 355-364
summary	The demand for sustainable building materials is currently a major concern of society. It is known that the traditional construction industry requires a high consumption of inorganic materials, which is associated with the excessive production of waste. Thus, this article intends to demonstrate the possibility of using the Additive Manufacturing (AM) technique Paste Extrusion Modeling (PEM) in the production of reusable, biodegradable and recyclable construction systems, using a combination of different natural materials that have created multiple pastes with different additives.Cellulose is a natural material - biodegradable, recyclable and low cost - and its implementation aims to change some aspects of the current state of the construction sector and can have a real impact on the exploration of innovative solutions and more sustainable alternative building systems. The integration of AM techniques, PEM method, supported by computational modelling tools, will allow the definition of a building system and its components. Depending on the material used - natural materials or biomaterials - the constraints and limitations of AM will be considered.
keywords	Cellulose; Natural Fibers; Additive Manufacturing; Sustainable Construction
series	eCAADe
email
last changed	2022/06/07 07:54

_id	35a1
authors	Caneparo, L.
year	1997
title	Shared Information System for Urban and Architectural Design
source	Coyne, R. Ramscar, M. Lee, J. and Zreik, K. (eds.) Design and the net. Proceedings of the Sixth International EuropIA Conference, Europia Productions, Paris, pp. 39-52
summary	This paper briefly describes the implementation of an Internet-intranet information system applied to a large-scale project. The large-scale project is centered on the urban area around the Porta Susa railway station in Turin, Italy. The information system integrates the communicative tools used to facilitate and improve the collaboration between the different actors working on the project and the distributed environment used to elaborate the information across a wide area network. The main factors considered are those which exploit the potentialities of computers and networks for interaction and communication. One result is the possibility of interacting dynamically with the information, re-elaborating and distributing it in progress. The information systems opens different ways of collaboration between the project employees, and extends the participation in the project to the citizens.
series	other
email
last changed	2003/04/23 15:14

_id	acadia09_234
id	acadia09_234
authors	Cantrell, Bradley E.; Yates, Natalie A.
year	2009
title	Abstraction Language: Digital/ Analog Dialogues
doi	https://doi.org/10.52842/conf.acadia.2009.234
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 234-239
summary	The connection between biological systems and machines is quickly becoming an important factor in designing the built environment. This paper explores the model of abstraction languages as a method to create communications between biological and mechanical systems, focusing on modes accessible to design professionals. The development of data and control abstraction in programming is explored in order to develop linkages between physical systems and digital interfaces. This examination looks at current methods of data conveyance for the built environment, and at pushing beyond these current methods to suggest a method of abstraction. The researchers are particularly interested in the ability of abstraction to compress ecological/biological complexity into accessible modules for responsive environments.
keywords	Abstraction, synthesis, processing, biological systems, responsive design
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:54

_id	caadria2021_147
id	caadria2021_147
authors	Cao, Yu, Kahlon, Yuval and Fujii, Haruyuki
year	2021
title	Capturing Interpretation Sources in Architectural Design by Observing Sequences of Design Acts
doi	https://doi.org/10.52842/conf.caadria.2021.2.141
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 2, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 141-150
summary	Prototyping is important for design exploration. While various computer-aided conceptual design systems (CACD) aim to support this practice, they are somewhat limited in their ability to suggest interpretations in-context. To improve these systems, we need a better understanding of how designers interpret things when designing, and what factors influence this activity. We observe architectural designers' design process, and conducted a deep analysis of the activity at several levels, to capture interpretative events. The analysis of these reveals interesting patterns of design interpretation, which may be used to enhance future CACD systems.
keywords	Design process; Design computing; Reinterpretation
series	CAADRIA
email
last changed	2022/06/07 07:54

For more results click below: