Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2458

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2011_050
id	ecaade2011_050
authors	Beirão, José N.; Nourian, Pirouz; Mashhoodi, Bardia
year	2011
title	Parametric urban design: An interactive sketching system for shaping neighborhoods
doi	https://doi.org/10.52842/conf.ecaade.2011.225
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.225-234
summary	In this paper we show the structure of an urban design parametric system. The system is dynamic and builds an interactive relation with the designer updating the layout and related data at each input change. The responsiveness of the system allows the designer to gain awareness on the qualitative consequences of each design move by comparing a design state with a set of urban indicators and density measures which are automatically calculated along with the geometrical updates.
wos	WOS:000335665500025
keywords	Parametric urban design; city modelling; urban planning
series	eCAADe
email
last changed	2022/05/01 23:21

_id	acadiaregional2011_025
id	acadiaregional2011_025
authors	Bum Kim, Jong ; Mark J. Clayton, Wei Yan
year	2011
title	Parametric Form-Based Codes: Incorporation of land-use regulations into Building Information Models
doi	https://doi.org/10.52842/conf.acadia.2011.x.l7j
source	Parametricism (SPC) ACADIA Regional 2011 Conference Proceedings
summary	This project describes investigations into whether parametric modeling using a Building Information Modeling (BIM) platform can represent the provisions and constraints of Form-Based Codes (FBCs). BIM software environments couple 3D modeling with parametric form generation and rich semantics. Further capabilities of an Application Programming Interface that supports Object-Oriented Programming (OOP) results in a very powerful environment for expressing planning and design concepts. While these capabilities were developed under the intention of supporting building design, we hypothesize that they can support planning rules and regulations that are found in FBCs. If our approach is successful, future planning departments will be able to provide architects and urban designers with a FBC that is implemented as a BIM software toolkit, better integrating the planning phase of a project into the building design phase.
series	ACADIA
last changed	2022/06/07 07:49

_id	ecaade2011_122
id	ecaade2011_122
authors	Chronis, Angelos; Jagannath, Prarthana; Siskou, Vasiliki Aikaterini; Jones, Jonathan
year	2011
title	Sensing digital co-presence and digital identity: Visualizing the Bluetooth landscape of the City of Bath
doi	https://doi.org/10.52842/conf.ecaade.2011.087
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.87-92
summary	The impact of ubiquitous digital technologies on the analysis and synthesis of our urban environment is undoubtedly great. The urban topography is overlaid by an invisible, yet very tangible digital topography that is increasingly affecting our urban life. As W. J. Mitchell (Mitchell 2005) pointed out, the digital revolution has filled our world with “electronic instruments of displacement” that “embed the virtual in the physical, and weave it seamlessly into daily urban life”. The mobile phone, the most integrated mobile device is closely related to the notion of a digital identity, our personal identity on this digital space. The Bluetooth is the mainly used direct communication protocol between mobile phones today and in this scope, each device has its own unique ID, its “MAC address”. This paper investigates the potential use of recording and analysing Bluetooth enabled devices in the urban scale in understanding the interrelation between the physical and the digital topographies.
wos	WOS:000335665500009
keywords	Pervasive systems; digital presence; urban encounter; digital identity
series	eCAADe
email
last changed	2022/05/01 23:21

_id	cf2011_p076
id	cf2011_p076
authors	Davis, Daniel; Burry Mark, Burry Jane
year	2011
title	Untangling Parametric Schemata: Enhancing Collaboration Through Modular Programming
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 55-68.
summary	Presently, collaboration is difficult on large and complex parametric models due to the illegibility of unstructured schemata. This lack of legibility makes it hard for an outside author to understand the model, reducing their ability to edit and share the model. This paper investigates whether the legibility of parametric models is enhanced through restructuring the schema with modular programming principles. During a series of thinking-aloud interviews, designers asked to describe the function of unfamiliar schemata could consistently better comprehend the schemata structured with modular principles. Modular programming is found to be a small change to parametric modelling that derives clear benefits in terms of legibility, particularly when the model is large and used in a collaborative environment.
keywords	parametric modelling, parametric schema, end-user programming, modular programming
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2011_015
id	caadria2011_015
authors	Davis, Daniel; Flora Dilys Salim and Jane Burry
year	2011
title	Designing responsive architecture: Mediating analogue and digital modelling in the studio
doi	https://doi.org/10.52842/conf.caadria.2011.155
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 155-164
summary	Prototyping digitally responsive architecture requires that architects know how to program and design electronics. Normally they don’t. The challenge for teachers is to teach these skills whilst maintaining a focus on the design potentials of responsive architecture. One method is to teach students to use Input-Output-Process (IPO) diagrams and parametric modelling as pathways into the logic of responsive architecture. The paper discusses the work of students taught this way during a semester long elective. Our analysis shows that IPO diagrams lead to reactive architecture, which matches the current technical limitations of responsive architecture. We argue that mediating analogue and digital models is an essential aspect to successful responsive architecture.
keywords	Responsive architecture; physical interaction; education; parametric design
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2011_003
id	caadria2011_003
authors	Davis, Daniel; Jane Burry and Mark Burry
year	2011
title	The flexibility of logic programming : Parametrically regenerating the Sagrada Família
doi	https://doi.org/10.52842/conf.caadria.2011.029
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 29-38
summary	Flexibility is a major attribute of parametric modelling, however designers find it hard to maintain flexibility throughout their projects. One cause may be the programming paradigm of the parametric model. Currently this is dataflow programming, which makes it easy to create and flex parameters, but difficult to modify relationships. This paper investigates the implications of changing the programming paradigm in a parametric model to logic programming. A qualitative account is given of using dataflow programming and logic programming to generate a portion of the Sagrada Família church. It finds logic programming adept at translating explicit models into parametric models, but lacking continuous flexibility. This research demonstrates there are different types of flexibility within the model and architects can privilege certain flexibility types by selecting the programming paradigm of the model.
keywords	Logic programming; parametric modelling; end user programming; practice based research
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ijac20119403
id	ijac20119403
authors	Davis,Daniel; Jane Burry and Mark Burry
year	2011
title	Understanding visual scripts: Improving collaboration through modular programming
source	International Journal of Architectural Computing vol. 9 - no. 4, 361-375
summary	Modularisation is a well-known method of reducing code complexity, yet architects are unlikely to modularise their visual scripts. In this paper the impact that modules used in visual scripts have on the architectural design process is investigated with regard to legibility, collaboration, reuse and design modification.Through a series of thinking-aloud interviews, and through the collaborative design and construction of the parametric Dermoid pavilion, modules are found to impact the culture of collaborative design in architecture through relatively minor alterations to how architects organise visual scripts.
series	journal
last changed	2019/07/30 10:55

_id	745e
id	745e
authors	Derix C, Kimpian J, Mason J and Karanouh A
year	2011
title	Feedback Architecture
source	In Terri Peters (ed), Experimental Green Strategies: Ecological Design Research: Architectural Design (AD), Wiley and Sons, Nov-Dec 2011
summary	Sustainable design and ecological building are the most significant global challenges for the design profession. To meet new building regulations and national targets for carbon emissions, all future buildings will be judged on their ‘green’ merits. For architects to maintain a competitive edge in a global market, innovation is now key; the design of new processes, technologies and materials that combat carbon emissions and improve the sustainable performance of buildings are paramount. Contemporary practices have responded by setting up multi- disciplinary internal research and development teams, with offices such as Foster + Partners, HOK and Aedas setting the bar for ground-breaking research and development. The aim of internal groups is often to adapt and create new technologies and materials and to borrow ways of working from other disciplines, to focus on innovation rather than incrementally increasing performance or efficiency. This title offers insights into how a wide range of established and emerging practices are rising to meet these challenges. In pursuit of integrated sustainability and low-energy building, material and formal innovation and new tools and technologies, it illustrates that the future of architecture is evolving in an exchange of ideas across disciplines. Incorporating the creation of new knowledge about ecological building within the profession, it also identifies the emergence of a collective will to seek out new routes that build in harmony with the environment.
keywords	sustainability, morphology, performance, design computation
series	journal paper
type	normal paper
email
more	http://eu.wiley.com/WileyCDA/WileyTitle/productCd-047068979X.html
last changed	2012/09/20 17:07

_id	ecaade2011_018
id	ecaade2011_018
authors	Grobman, Yasha J.; Ron, Ruth
year	2011
title	Digital Form Finding: Generative use of simulation processes by architects in the early stages of the design process
doi	https://doi.org/10.52842/conf.ecaade.2011.107
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.107-115
summary	The paper presents performance oriented approaches to digital form finding which stems from the lines of research on performance and morphogenesis in architectural design. The main contribution to the earlier research is threefold; it examines the potential of the presented design processes to integrate interdisciplinary approach based on the use of simulation tools by architects or direct data exchange between simulation tools and design. Secondly, it explores new methods to generate initial architectural form based on performance information that apply to both building scale and urban scale, and lastly, it develops the theoretical framework on the ramifications of employing simulation technology and techniques in architectural design.
wos	WOS:000335665500012
keywords	Form generation; performance; simulation; parametric design; form finding
series	eCAADe
email
last changed	2022/05/01 23:21

_id	caadria2011_053
id	caadria2011_053
authors	Jalalian, Arash; Stephan K. Chalup and Michael J. Ostwald
year	2011
title	Agent-agent interaction as a component of agent-environment interaction in the modelling and analysis of pedestrian visual behaviour
doi	https://doi.org/10.52842/conf.caadria.2011.555
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 555-564
summary	This multidisciplinary project involves concepts from architectural design, statistical learning, machine vision, and human ecology. The focus is on analysing how pedestrians’ dynamic behaviour in space is influenced by the environmental design of different architectural scenarios. This paper presents a multi-agent pedestrian simulation and analysis system that supports agent-to-agent interactions, different spatial desires, and interpersonal distance. The system simulates and analyses pedestrian spatial behaviour with combined focus on movement trajectories, walking speed, and the visual gaze vector. The analysis component relies on learning a statistical model characterising normal/abnormal behaviour, based on sample observations of regular pedestrian movements without/with the impacts of significant visual attractions in the environment. Using the example of Wheeler Place in Newcastle (Australia) our pilot experiments demonstrate how pedestrian behaviour characteristics can depend on selected features in the visual environment. The presented system will allow architects and urban designers to obtain better assessment of planned urban spaces and streetscape characteristics and their impacts on pedestrian behaviour.
keywords	Agent interaction; pedestrian behaviour; analysis
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2011_104
id	ecaade2011_104
authors	Jorge Gil, Júlio Almeida, José Pinto Duarte
year	2011
title	The backbone of a City Information Model (CIM): Implementing a spatial data model for urban design
doi	https://doi.org/10.52842/conf.ecaade.2011.143
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.143-151
summary	We have been witnessing an increased interest in a more holistic approach to urban design practice and education. In this paper we present a spatial data model for urban design that proposes the combination of urban environment feature classes with design process feature classes. This data model is implemented in a spatial database that becomes the backbone of a City Information Model (CIM), integrating urban neighbourhood formulation, design, and evaluation methods into a comprehensive urban design support system. We demonstrate its application to urban design analysis and evaluation through the development of a tool for AutoCAD Map 3D that is integrated with the PostGIS spatial database.
wos	WOS:000335665500016
keywords	Urban design; data model; GIS; design support tools; urban design evaluation
series	eCAADe
email
last changed	2022/05/01 23:21

_id	acadia11_334
id	acadia11_334
authors	Khoo, Chin Koi; Burry, Jane; Burry, Mark
year	2011
title	Soft Responsive Kinetic System: An Elastic Transformable Architectural Skin for Climatic and Visual Control
doi	https://doi.org/10.52842/conf.acadia.2011.334
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 334-341
summary	Most designers of dynamic building skins that reconfigure themselves in changing conditions have utilised mechanical systems. However, when designing for dynamic responsiveness, these systems often involve intricate and high-tech mechanistic joints, actuators and control. This research investigates the possibility of the ‘soft’ form-changing material systems to minimise the use of ‘hard’ mechanical components for kinetic responsive architectural skins. The research goal is to develop a prototype system that can be used to retrofit an existing building with an application of a ‘second skin’ that performs well in various climate conditions and is visually compelling. This approach is tested by the prototype, namely “Curtain”. It serves two fundamental purposes: Comfort and Cosmetic, to improve the existing interior and exterior spatial conditions. As an early proposition, the significance of this research offers a practical method for realising a ‘soft’ transformable architectural skin that synthesises passive cooling, manipulates sunlight and is set as an active shading device. Parametric design is used to explore and simulate these climatic and visual design constraints.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	caadria2011_006
id	caadria2011_006
authors	Kim, Jason J. and Hyoung-June Park
year	2011
title	Digital catalogue: A computational implementation of Korean joinery system in the design of a transformable disaster shelter
doi	https://doi.org/10.52842/conf.caadria.2011.061
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 61-70
summary	With the help of Building Information Modelling (BIM), the digital catalogue of all the 44 components of Korean joinery system is developed for the application of their tectonic principles in the design of a transformable disaster shelter. Based upon the components of three primary bracket styles (Jusim-Po, Ik-Gong, and Da-Po) of traditional Korean joinery system in the catalogue, the parametric modifications of the components and their rearrangements are performed for various iteration of the disaster shelter. The usage of Korean joinery system in assembling and disassembling the components enhances the transformability and the reusability of the shelter. This paper demonstrates the computational implementation of Korean joinery system and the design process of a transformable disaster shelter.
keywords	Digital catalogue; BIM; Korean joinery system
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ijac20119405
id	ijac20119405
authors	Koi Khoo, Chin; Flora Salim and Jane Burry
year	2011
title	Designing Architectural Morphing Skins with Elastic Modular Systems
source	International Journal of Architectural Computing vol. 9 - no. 4, 379-419
summary	This paper discusses the issues of designing architectural skins that can be physically morphed to adapt to changing needs.To achieve this architectural vision, designers have focused on developing mechanical joints, components, and systems for actuation and kinetic transformation. However, the unexplored approach of using lightweight elastic form-changing materials provides an opportunity for designing responsive architectural skins and skeletons with fewer mechanical operations. This research aims to develop elastic modular systems that can be applied as a second skin or brise-soleil to existing buildings.The use of the second skin has the potential to allow existing buildings to perform better in various climatic conditions and to provide a visually compelling skin.This approach is evaluated through three design experiments with prototypes, namely Tent, Curtain and Blind, to serve two fundamental purposes: Comfort and Communication.These experimental prototypes explore the use of digital and physical computation embedded in form-changing materials to design architectural morphing skins that manipulate sunlight and act as responsive shading devices.
series	journal
last changed	2019/07/30 10:55

_id	cdrf2023_235
id	cdrf2023_235
authors	Mohsen Kafaei, Jane Burry, Mehrnoush Latifi, Joseph Ciorciari
year	2023
title	Designing a Systematic Experiment to Investigate the Effect of Ambient Smell on Human Emotions in the Indoor Space; Introducing a Mixed-Method Approach
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_20
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
summary	Studies have indicated that built environments affect all aspects of human life such as emotion, perception, behavior, health, and well-being (Cooper et al. 2011). Built environments are formed from the combination and juxtaposition of visible and invisible environmental variables. In recent years, common techniques such as virtual reality, augmented reality, digital twins, and artificial intelligence have enabled researchers in the field of architecture and urban design to simulate environmental conditions to investigate the impacts of environmental variables on humans. However, the studies conducted in this field of human comfort are mostly focused on the impact of environmental variables such as form, temperature, humidity, and sound, and in fewer studies, up-to-date methods and technologies have been used to simulate and investigate the impact of smell on humans. Most of the studies that have investigated the effect of ambient smell on humans, carried out in the discipline of architecture and urban design, have used traditional tools and methods (questionnaire, interview, observation) rather than advanced technology and tools drawing on neuroscientific knowledge and technique to measure the effectiveness of the ambient smell on human. They have used unmasked scents or real-world environments rather than being able to simulate environmental conditions. This article highlights the significance and necessity of employing simulation methods to investigate the impact of environmental smells on humans. Additionally, it presents the methodology of an experiment for studying the effect of indoor environment smells (with a case study of an office environment in the initial phases) on human emotions, utilizing a mixed-method approach. Analysis of some parts of the data from this experiment showed that exposure to the fragrance of the jasmine flower pleasant (flower) and the odor of the rotten orange peel (unpleasant) can cause changes in the electroencephalography (EEG) power across different bands among participants.
series	cdrf
email
last changed	2024/05/29 14:04

_id	sigradi2011_234
id	sigradi2011_234
authors	Nome, Carlos; Clayton, Mark J.; Aguiar, Marcela
year	2011
title	BIM: configurações e desdobramentos para implementação prática e ensino de arquitetura [BIM: configurations and unfoldings for implementation in practice and architectural education]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 507-511
summary	This paper reports on the initial findings of a long term case study. It focuses on the BIM implementation efforts for Brazilian public firms that are responsible for the design, construction and management of buildings, infrastructure and urban spaces. It was postulated that BIM implementation could bring to Brazilian public institutions benefits similar to the ones achieved in the US, yet at a different cost structure. Research follows a mixed methods approach using focus groups and quasi experiments. Results describe obstacles encountered, benefits realized, and process changes expected that result from Brazilian socio-cultural context applied to public institutions.
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	caadria2011_047
id	caadria2011_047
authors	Ostwald, Michael J.; Josephine Vaughan and Stephan K. Chalup
year	2011
title	Data flow and processing in the computational fractal analysis method
doi	https://doi.org/10.52842/conf.caadria.2011.493
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 493-502
summary	One of the few quantitative methods available for the consistent analysis of architectural form is the ‘box-counting’ approach to determining the approximate fractal dimension of a plan or elevation. In its computational form this method has been used to analyze the plans and facades of a wide range of buildings. The data points produced are synthesized by the software into a series of fractal dimension (D) values that are in turn compiled in various ways to produce a series of composite results describing a complete building. Once this process is complete the data may be coded with additional information producing a set of mathematical results that describe the form of a building. This paper offers the first complete description of this important analytical process from the point of view of information flow, algorithmic operations, review options and data magnitude. No previous paper has detailed the full scope of the data used in the computational method, or the way in which various stages produce different types of outcomes. The purpose of this paper is to elucidate the way in which this particular computational method, drawing its inspiration from the complexity in natural systems, may be used to process different types of information and produce various forms of quantitative data to support architectural design and analysis.
keywords	Fractal analysis; computational analysis
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	cf2011_p152
id	cf2011_p152
authors	Plume, Jim; Mitchell John
year	2011
title	An Urban Information Framework to support Planning, Decision-Making & Urban Design
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 653-668.
summary	This paper reports on a 2-year research project undertaken in collaboration with a state planning authority, a major city municipal council and a government-owned development organisation. The project has involved the design of an urban information model framework with the aim of supporting more informed urban planning by addressing the intersection where an individual building interfaces with its urban context. This adopted approach enables new techniques that better model the city and its processes in a transparent and accessible manner. The primary driver for this project was the challenge provided by the essential incompatibility between legacy GIS (geographic information system) datasets and BIM (building information model) representations of the built form. When dealing with urban scale information, GIS technologies use an overlay mapping metaphor linked to traditional relational database technologies to identify features or regions in the urban landscape and attach attribute data to those in order to permit analysis and informed assessment of the urban form. On the other hand, BIM technologies adopt an object-oriented approach to model the full three-dimensional characteristics of built forms in a way that captures both the geometric and physical attributes of the parts that make up a building, as well as the relationships between those parts and the spaces defined by the building fabric. The latter provides a far richer semantic structure to the data, while the former provides robust tools for a wide range of urban analyses. Both approaches are widely recognised as serving well the needs of their respective domains, but there is a widespread belief that we need to reconcile the two disparate approaches to modelling the real world. This project has sought to address that disjunction between modelling approaches. The UrbanIT project concentrated on two aspects of this issue: the development of a framework for managing information at the precinct and building level through the adoption of an object-oriented database technology that provides a platform for information management; and an exploration of ontology tools and how they can be adopted to facilitate semantic information queries across diverse data sources based on a common urban ontology. This paper is focussed on the first of those two agendas, examining the context of the work, the challenges addressed by the framework and the structure of our solution. A prototype implementation of the framework is illustrated through an urban precinct currently undergoing renewal and redevelopment, finishing with a discussion of future work that comes out of this project. Our approach to the implementation of the urban information model has been to propose extensions to ISO/PAS 16739, the international standard for modelling building information that is commonly known as IFC (Industry Foundation Classes). Our reason for adopting that approach is primarily our deep commitment to the adoption of open standards to facilitate the exchange of information across the built environment professions, but also because IFC is based on a robust object schema that can be used to construct a internet-accessible database able, theoretically, to handle the vast quantity of data needed to model urban-scale information. The database solution comes with well-established protocols for handling data security, integrity, versioning and transaction processing or querying. A central issue addressed through this work is concerned with level of detail. An urban information model permits a very precise and detailed representation of an urban precinct, while many planning analyses rely on simplified object representations. We will show that a key benefit of our approach is the ability to simultaneously maintain multiple representations of objects, making use of the concept of model view definitions to manage diverse analysis needs.
keywords	urban information modelling, geographic information systems, city models, interoperability, urban planning, open standards
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2011_237
id	sigradi2011_237
authors	Quitral Zapata, Francisco J.; González Böhme, Luis F.
year	2011
title	Sistema de seguimiento solar de bajo costo para instalaciones fotovoltaicas domésticas [Low-cost solar tracking system for domestic photovoltaic installations]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 118-122
summary	The ongoing research is focused on the development of a low-cost solar tracking system to improve domestic fixed PV installations which performance is dramatically diminished due to the absence of reorientation mechanisms to maximize solar energy capture. A straightforward way to reduce fabrication and maintenance costs of a domestic solar tracking system is to avoid the use of photoresistors. Most solar trackers use photoresistors to reorient their PV panels. However, the daily and seasonal solar path is well known and its variation is negligible when comparing photoresistorbased and preprogrammed reorientation against the amount of solar energy that is captured.
series	SIGRADI
email
last changed	2016/03/10 09:58

_id	acadia23_v1_110
id	acadia23_v1_110
authors	Scelsa, Jonathan; Sheward, Gregory; Birkeland, Jennifer; Liu, Jemma; Lin, Yun Jou
year	2023
title	Centripetal Clay Printing : Six-Axis Prints for Habitat Column
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 110-115.
summary	Gottfried Semper, in his 1851 text The Four Elements of Architecture, famously classifies architecture into four elemental parts: the hearth, the roof, the enclosure, and the mound, describing the role of the last three to be the “defenders of the hearth’s flame against the three hostile elements of nature (Semper 2011).” Modernity has witnessed the role of enclosure evolve to that of a sealed envelope, or one which meticulously separates the ‘natural environment,’ from the internally regulated environment as part of modern comfort. The post-modern advent of the rain-screen has further separated the layer of exteriorized cultural expression from the structuring envelope, removing the ornamental aspect of Semper’s enclosure, from the enclosing layer. This habit of casting the natural processes out of our building envelopes has resulted in the rapid depletion of space for biodiversity within our cities. Joyce Hwang in her essay “Living Among Pests,” has suggested that the needed reconnection of biodiversity with our urban buildings will force a re-examination of “facade articulation to take on more responsibilities. Ornament will become performative” (Hwang 2013).
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

For more results click below: