Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1567

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2011_122
id	ecaade2011_122
authors	Chronis, Angelos; Jagannath, Prarthana; Siskou, Vasiliki Aikaterini; Jones, Jonathan
year	2011
title	Sensing digital co-presence and digital identity: Visualizing the Bluetooth landscape of the City of Bath
doi	https://doi.org/10.52842/conf.ecaade.2011.087
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.87-92
summary	The impact of ubiquitous digital technologies on the analysis and synthesis of our urban environment is undoubtedly great. The urban topography is overlaid by an invisible, yet very tangible digital topography that is increasingly affecting our urban life. As W. J. Mitchell (Mitchell 2005) pointed out, the digital revolution has filled our world with “electronic instruments of displacement” that “embed the virtual in the physical, and weave it seamlessly into daily urban life”. The mobile phone, the most integrated mobile device is closely related to the notion of a digital identity, our personal identity on this digital space. The Bluetooth is the mainly used direct communication protocol between mobile phones today and in this scope, each device has its own unique ID, its “MAC address”. This paper investigates the potential use of recording and analysing Bluetooth enabled devices in the urban scale in understanding the interrelation between the physical and the digital topographies.
wos	WOS:000335665500009
keywords	Pervasive systems; digital presence; urban encounter; digital identity
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_063
id	ecaade2011_063
authors	Garner, Steve; Schadewitz, Nicole; Holden, Georgina; Zamenopoulos, Theodore; Alexiou, Katerina
year	2011
title	Supporting Fragility in Distance Design Education
doi	https://doi.org/10.52842/conf.ecaade.2011.663
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.663-672
summary	This paper outlines work in progress that seeks to support and develop online distance design education for adult learners. At the core of this paper is the belief that design thinking is fragile and the systems we create to support design thinking are fragile. This has important implications for those seeking to implement immersive environments for teaching and learning in disciplines such as engineering, product design, environment design and architecture. This paper suggests we need to look backwards in order to look forwards; that by examining the characteristics of the traditional ‘atelier’ model of art and design education we might observe clues to a framework of teaching and learning in design that can embrace the opportunities presented by new digital technologies. The paper focuses on the use of Second Life as a component of a wider virtual design atelier and explores how Second Life might potentially offers a means of addressing fragile collaborative learning.
wos	WOS:000335665500077
keywords	Design; atelier; ARCHI21; education
series	eCAADe
email
last changed	2022/05/01 23:21

_id	architectural_intelligence2023_11
id	architectural_intelligence2023_11
authors	Hua Chai & Philip F. Yuan
year	2023
title	Hybrid intelligence
doi	https://doi.org/https://doi.org/10.1007/s44223-023-00029-w
source	Architectural Intelligence Journal
summary	Alongside shifts in the technological landscape, the origin of creativity in architectural design has been consistently evolving. According to French philosopher Bernard Stiegler, the architectural design process is never individualistic but rather shaped by the complex interaction between human creativity and what he terms the “pre-individual milieu”, the synthesis of various factors such as cultural heritage, technological innovation (Stiegler, 2016). Over the last three decades, the emergence of digital technologies such as the Internet of Things, virtual reality, and artificial intelligence has significantly enhanced the dynamism and diversity of human–machine communication. With the advancement of digital technologies in the field of architecture, artificial intelligence, machine intelligence, and material intelligence are increasingly integrated into the creative process. In the form of hybrid intelligence, this shift expands the scope of architectural creativity and creative agency beyond the mere intelligent landscape of the human mind. As suggested by architectural theorist Antoine Picon, “another possibility is to consider the pairing of man and machine as a new composite subject……This proposition is suggested by various contemporary reflections on computer technologies and their anthropological dimension” (Picon, 2011).
series	Architectural Intelligence
email
last changed	2025/01/09 15:00

_id	ecaade2012_113
id	ecaade2012_113
authors	Jutraz, Anja ; Zupancic, Tadeja
year	2012
title	Digital system of tools for public participation and education in urban design: Exploring 3D ICC
doi	https://doi.org/10.52842/conf.ecaade.2012.1.383
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 383-392
summary	This article is a starting point for the development of experiential urban co-design interfaces to enhance public participation in local urban projects and to be also used as a communication and collaboration tool in urban design. It is based on the previous research involving 3D city models utilized as understandable design interfaces for the non-technical public (Jutraz, Zupancic, 2011), where we have already explored different views (pedestrian, intermediate and bird’s-eye view), as well as the means by which the information obtained from these different views may be combined by shifting between viewpoints. Previous work was conducted in the “street lab” as well as the Urban Experimental Lab, which was developed specifi cally for the public’s participation in urban planning (Voigt, Kieferle, Wössner, 2009). Presented in this article is the next step that explores the immersive collaboration environment 3D ICC [1], formerly known as Teleplace. The environment was developed for effi cient collaboration and remote communication and shifts the research focus towards questions regarding how to employ both labs as interfaces between the non-technical public and design professionals. As we are facing the lack of digital systems for public participation and education in urban design, different digital tools for communication and collaboration should be combined into a new holistic platform for design. A digital system of tools needs to be developed that supports the urban design decision-making process and focuses on improved final solutions and increased satisfaction amongst all participants. In this article the system of digital tools for public participation, which include communication, collaboration and education, will be also defi ned, with its basic characteristics and its elements.
wos	WOS:000330322400039
keywords	Digital system of tools; collaboration; 3D model; public participation; urban design
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2011_098
id	ecaade2011_098
authors	Jutraz, Anja; Voigt, Andreas; Zupancic, Tadeja
year	2011
title	Exploring Urban Experimental Lab for public participation and education in urban design
doi	https://doi.org/10.52842/conf.ecaade.2011.904
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.904-912
summary	This paper deals with visual digital collaborative tools for public participation in urban design. First it addresses the problem of the diversity of skills and knowledge levels of all the actors involved. The main focus is on exploring Urban Experimental Lab (Voigt, Kieferle, Wössner, 2009), developed for public participation in urban design, shifting the research focus towards the questions of educating both lay and different professional public through this process. Public participation in urban design is seen as an opportunity for lifelong urban design learning, offering a wide variety of different actions, problems and educational elements. All the participants are expected to improve their knowledge levels through participating in design process.
wos	WOS:000335665500104
keywords	Digital collaborative tool; urban experimental lab; public participation; education; urban design
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_033
id	ecaade2011_033
authors	Kligerman, Brad; Mehdaoui, Jamil
year	2011
title	Building Fragile Places: Mixed Reality as an architectural platform
doi	https://doi.org/10.52842/conf.ecaade.2011.653
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.653-662
summary	This paper will explore the hypothesis that Mixed Reality is a differentiated media and credible framework for the generation, fabrication and communication of projects that are explicitly engaged in design research. This will be shown through a critical presentation of three built and unbuilt projects by Building w/immaterials in the domains of architecture, installation and education. These projects will demonstrate the creative and theoretical application of Mixed Reality from within the differentiated social system of Architecture. While the majority of research into Mixed Reality seems to concern its technical aspects, we will explore its application as a creative system for project development, realization and diffusion.
wos	WOS:000335665500076
keywords	Architecture; Mixed Reality; Innovation; Virtual Worlds; Media
series	eCAADe
email
last changed	2022/05/01 23:21

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_022
id	ecaade2011_022
authors	Achten, Henri
year	2011
title	Degrees of Interaction: Towards a Classification
doi	https://doi.org/10.52842/conf.ecaade.2011.565
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.565-572
summary	In architecture various approaches have been developed do deal with changing demands on the building. The most recent development is interactive architecture. In this paper we aim to outline what interactive architecture is. First we define the type of performance behavior that an interactive building or environment has. Following, we consider the relation between the system and the user. We derive four types of relations, characterized as “perfect butler,” “partner,” “environmental,” and “wizard.” Interactive systems are composed of sensors, controllers, actuators, and materials. Various degrees of interactivity can be achieved with such systems, ranging from passive, reactive, autonomous, to agent systems. Complete with earlier discussion of design methods this provides the range of aspects that should be considered when designing interactive architecture.
wos	WOS:000335665500065
keywords	Interactive architecture; Human-Computer interaction; design theory
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_017
id	ecaade2011_017
authors	Achten, Henri; Koszewski, Krzysztof; Martens, Bob
year	2011
title	What happened after the “Hype” on Virtual Design Studios?: Some Considerations for a Roundtable Discussion
doi	https://doi.org/10.52842/conf.ecaade.2011.023
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.23-32
summary	The issue of collaborative design has been elaborated extensively within the framework of previous CAAD–conferences. Today, an appreciation for traditional attitudes and methods can be observed, but interestingly, a mixture of approaches is also noticeable (computational techniques used in low–tech fabrication environments, for example). This allows for a round–table survey of the current state–of–the–art focused on experiences related to distant learning in the architectural curriculum. To make VDS viable, not only are technological solutions necessary, but so are social (among people) and professional (ways of behavior) ones. In this round–table we aim to identify critical factors of success (or failure).
wos	WOS:000335665500001
keywords	Education; architectural curriculum; blended learning; collaborative design; VDS
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ijac201310105
id	ijac201310105
authors	Agkathidis, Asterios and Andre_ Brown
year	2013
title	Tree-Structure Canopy:A Case Study in Design and Fabrication of Complex Steel Structures using Digital Tools
source	International Journal of Architectural Computing vol. 11 - no. 1, 87-104
summary	This paper describes and reflects on the design and manufacturing process of the Tree-Structure canopy for the WestendGate Tower in Frankfurt upon Main, completed early 2011.The project investigated fabrication and assembly principles of complex steel structures as well as the integration of contemporary computational design, engineering, optimization and simulation techniques in a collaborative design approach. This paper focuses on the notion of modular standardization as opposed to non standard customized components. It also engages with issues relating to digital production tools and their impact on construction cost, material performance and tolerances. In addition it examines the reconfiguration of liability during a planning and construction process, an aspect which can be strongly determined by fabrication companies rather than the architect or designer.This paper is written as a reflection on the complete building process when contemporary digital tools are used from design through to fabrication. It studies both the generation of the steel structure as well the ETFE cushion skin. It reports on a collaborative project, where the main author was responsible for the canopies design, parameterization, digitalization and fabrication, as well as for the dissemination of the outcomes and findings during the design and realization process.As such it represents an example of research through design in a contemporary and evolving field.The canopy received a design award by the Hellenic Architecture Association.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2011_099
id	ecaade2011_099
authors	Ahlquist, Sean; Menges, Achim
year	2011
title	Methodological Approach for the Integration of Material Information and Performance in the Design Computation for Tension-Active Architectural Systems
doi	https://doi.org/10.52842/conf.ecaade.2011.799
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.799-808
summary	As computational design processes have moved from representation to simulation, the focus has shifted towards advanced integration of performance as a form defining measure. Performance, though, is often assessed purely on the level of geometry and stratified between hierarchically independent layers. When looking at tension-active membrane systems, performance is integrated across multiple levels and with only the membrane material itself, defining the structural, spatial and atmospheric qualities. The research described in this paper investigates the integrative nature of this type of lightweight structure and proposes methodologies for generating highly articulated and differentiated systems. As material is a critical component, the research focuses on a system-based approach which places priority on the inclusion of material research and parameterization into a behavior-based computational process.
wos	WOS:000335665500092
keywords	Material behavior; material computation; system; gestalt; tension-active system
series	eCAADe
email
last changed	2022/05/01 23:21

_id	acadia11_82
id	acadia11_82
authors	Ahlquist, Sean; Menges, Achim
year	2011
title	Behavior-based Computational Design Methodologies: Integrative processes for force defined material structures
doi	https://doi.org/10.52842/conf.acadia.2011.082
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 82-89
summary	With the introduction of physics-based algorithms and modeling environments, design processes have been shifting from the representation of materiality to the simulation of approximate material descriptions. Such computational processes are based upon enacting physical and material behavior, such as gravity, drag, tension, bending, and inflation, within a generative modeling environment. What is often lacking from this strategy is an overall understanding of computational design; that information of increasing value and precision is generated through the development and iterative execution of specific principles and integrative mechanisms. The value of a physics-based modeling method as an information engine is often overlooked, though, as they are primarily utilized for developing representational diagrams or static geometry – inevitably translated to function outside of the physical bounds and parameters defined with the modeling process. The definition of computational design provides a link between process and a larger approach towards architecture – an integrative behavior-based process which develops dynamic specific architectural systems interrelated in their material, spatial, and environmental nature. This paper, focusing on material integration, describes the relation of a computational design approach and the technical framework for a behavior-based integrative process. The application is in the development of complex tension-active architectural systems. The material behavior of tensile meshes and surfaces is integrated and algorithmically calibrated to allow for complex geometries to be materialized as physical systems. Ultimately, this research proposes a computational structure by which material and other sorts of spatial or structural behaviors can be activated within a generative design environment.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
doi	https://doi.org/10.52842/conf.acadia.2012.047
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2011_052
id	caadria2011_052
authors	Al-Kazzaz, Dhuha A. and Alan Bridges
year	2011
title	Assessing innovation in hybrid designs using shape grammars
doi	https://doi.org/10.52842/conf.caadria.2011.545
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 545-554
summary	Al-kazzaz et al (2010) described hybrid adaption technique to generate innovative designs from heterogeneous precedents using shape grammars. An evaluation of the degree of innovation in the hybrid designs gave feedback to grammar users before and after applying a rule. Innovation was assessed using variables derived from the internal structure of the grammar such as: the number of antecedents in the corpus having the same rule; the number of rules in a subclass rule set having the same geometry; etc. However, the validity of the innovation assessment was unclear and the use of the feedback measures was not demonstrated. Accordingly, this study aims to verify the credibility of the innovation measures and to identify the independent variables that a user can control to achieve a significant impact on each innovation measure as a dependent variable.
keywords	Shape grammars; hybrid design; innovation assessment
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2016_046
id	ascaad2016_046
authors	Albarakat, Reem; Gehan Selim
year	2016
title	Radicalism vs. Consistency - The Cyber Influence on Individuals’ Non-Routine Uses in the Heritage Public Spaces of Cairo
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 451-460
summary	Since the emergence of the concept of user-generated content websites – Web 2.0, Internet communications have developed as a powerful personal and social phenomenon. Many Internet applications have become partially or entirely related to the concept of social network; and cyberspace has become a space about ‘us’ not ‘where’ we are. This paper investigates the theoretical grounds of the effect of cyber experience on changing the individuals’ uses of the public spaces, and sustaining this change through maintaining the ties and reciprocal influence between actions in physical and cyber spaces. It aims at examining the impact of cyber territories on the perception, definition and effectiveness of personal space within different circumstances; and its role in changing the uses of spaces where people used to act habitually. The personal space, here, will be represented as the core of both: change and consistency – the space of bridging the reciprocal effect of cyber and physical counterparts, which is transformed through the experience of physical events mediated into the cyberspace. The paper is part of a study which looks at the case of Tahrir Square during the Egyptian political movement in 2011. We will compare the activists’ actions and practices in the Square during different events of non-routine use of the square and its surroundings. The case study will show the level of consistency in the features of the produced personal space within different waves of the revolutionary actions for all that different circumstances, motivations and results.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ecaade2011_117
id	ecaade2011_117
authors	Albayrak, Canan; Tunçer, Bige
year	2011
title	Performative architecture as a guideline for transformation: Defense Line of Amsterdam
doi	https://doi.org/10.52842/conf.ecaade.2011.501
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.501-510
summary	Performance as an architectural design paradigm has been emerging during the recent years. We have developed an understanding that we formalized as a taxonomy for performative architecture that considers performance from three points of view: health, safety and security performance; functional and efficiency performance; and psychological, social, cultural, and esthetic performance. This paper focuses on a design project that explores these ideas as a performative architecture proposal. The project focuses on the architectural transformation of the Defense Line of Amsterdam, 41 forts, as a green belt. This transformation considers a holistic approach of defining a general method and guideline. We developed a series of parametric models for the definition and generation of designs. The first model computes an urbanization level for each fort. Consequently, models are developed in 4 stages: regional design, urban design, building design, and production of a scale model, and these are applied in an iterative manner to reach design outcomes for the project.
wos	WOS:000335665500058
keywords	Performative architecture; performance evaluation; taxonomy; parametric modeling
series	eCAADe
email
last changed	2022/05/01 23:21

_id	sigradi2011_282
id	sigradi2011_282
authors	Alcantara Brod, Gustavo; Borda Almeida da Silva, Adriane; Freitas Pires, Janice
year	2011
title	Anamorfose na Praça: Um Encontro do Real e do Virtual [Anamorphosis in the square: the real meets the virtual]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 131-134
summary	This paper describes the process of creating anamorphic projection using digital tools in order to apply this technique to full color images that can then be printed and applied onto a surface. The experiment was done as an installation in the main square of the city of Pelotas - RS, intended to explore the perception of three-dimensional illusion produced by anamorphosis and verify the reaction of the general public while they experience the unusual view of the historic building in front of them.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	eaea2009_alkan
id	eaea2009_alkan
authors	Alkan, Alper Semih
year	2011
title	Representation beyond Visualization: Simulation as a Cognitive Apparatus
source	Projecting Spaces [Proceedings of the 9th European Architectural Endoscopy Association Conference / ISBN 978-3-942411-31-8 ], pp. 99-106
series	other
more	http://info.tuwien.ac.at/eaea
last changed	2011/03/04 08:45

_id	10cc
id	10cc
authors	Alves, Gilfranco; Nojimoto, Cynthia
year	2011
title	Strings Pavilion: design process
source	V!RUS, [online] n. 6. [online] Available at: . [Accessed: 30 December 2011].
summary	The paper presents the design process of Strings Pavilion developed during the Architectural Association School of Architecture's Visiting School Workshop occurred in Sao Paulo city, in July, 2011. The pavilion is an outcome from a collective creation process of five persons team working in an immersive way during ten days; they explored several possibilities of experimentation and hybrid processes from researches about materials features and behaviors as well as parametric software. Fundamental concepts such as loop, feedback and responsivity from Second Order Cybernetic and Systems Theory were included and applied in the creation process.
keywords	design processes; Second Order Cybernetic; Complex Systems, parametric design; digital fabrication; interactivity.
series	other
type	normal paper
email
more	http://www.nomads.usp.br/virus/virus06/?sec=6&item=2&lang=en
last changed	2012/01/09 07:27

_id	sigradi2011_084
id	sigradi2011_084
authors	Alves, Gilfranco; Pratschke, Anja
year	2011
title	Mediação digital e revisão dos processos de design em Arquitetura [Digital mediation and review of design processes in Architecture]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 35-38
summary	This paper presents partial results of doctoral research entitled Architecture, Semiotics and Second Order Cybernetics: observation, representation and performance in design process. The research is linked to the Nomads.usp research group and proposes a review of design process, considering the mediation of digital media by using concepts of Second order Cybernetics. This work start with the hypothesis that in a contemporary context, professional demands of architects and designers requires a different approach in relation to the concept of emergence in architecture, and also describes an experiment during the AA Visiting School SP 2011, the Strings / Supple Pavilion project.
keywords	Design processes; digital media; emergence; performance.; Second-order Cybernetics
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: