Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2219

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2011_350
id	sigradi2011_350
authors	Borda, Adriane; Pires, Janice; de Vasconcelos, Tássia; dos Santos Nunes, Cristiane
year	2011
title	Trajetórias de Aprendizagem em Representação Gráfica Digital [Learning in Paths Digital Graphic Representation]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 167-170
summary	This paper describes a process of delimitation of learning trajectories in Digital Graphic Representation, for training in architecture. These paths are configured by an exercises sequence of representation of architectural works, selected so as to contemplate broader concepts and techniques possible in terms of formal settings. From the provision of learning materials are being promoted moments of ownership of digital techniques of representation, incorporating educational objectives of the disciplines of Design, Architecture and Computer Science Applied to Geometry.
keywords	Learning paths; digital graphics representation; architectural works; teaching materials
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2011_p165
id	cf2011_p165
authors	Chasznar, Andre
year	2011
title	Navigating Complex Models in Collaborative Work for (Sustainably) Integrated Design
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 619-636.
summary	Increasingly intensive use of computational techniques such as parametric-associative modeling, algorithmic design, performance simulations and generative design in architecture, engineering and construction are leading to increasingly large and complex 3D building models which in turn require increasingly powerful techniques in order to be manipulated and interpreted effectively. Further complexities are of course due also to the multi-disciplinary nature of building projects, in which there can be significant variation and even conflict among the aims of architects, engineers and builders, as well as owners, occupants and other stakeholders in the process. Effective use of model information depends to a large extent on sense-making, which can in some ways be helped but also hindered by schemes for organizing the information contained. Common techniques such as layering, labeling (aka ‚Äòtagging‚Äô) and assignment of various other attributes to model objects have significant limitations ‚Äì especially those arising from general problems of language, ontology and standardization, as well as but distinct from issues of interoperability ‚Äì both with respect to locating the desired items in a 3D building model and also with respect to displaying the objects in informative ways which effectively assist collaborative design and decision-making. Sustainable design in particular is an area generally requiring a high level of inter-disciplinary collaboration to achieve highly integrated designs which make multiple use of the elements and systems incorporated (though integrated design may also be pursued without explicit aims of sustainability). The proposed paper describes ongoing research concerning alternatives to the currently common techniques for locating and displaying information in 3D building models in support of sense-making to promote collaborative and integrated design. These alternatives comprise on the one hand interactive geometric-content-based methods for search and classification of model objects ‚Äì as an alternative or complement to common assigned-attribute-based methods ‚Äì and on the other hand visual analytic techniques ‚Äì in contrast to existing, relatively static tabular and "physical" views ‚Äì which can help to increase the informativeness of the geometric data within the model, as well as the non-geometric data that is attached to geometric objects (e.g. as in the cases of BIM and various types of CAE performance simulations). Tests undertaken with architects and engineers in practice and academia to evaluate the proposed methods are also described. Finally conclusions are drawn regarding these methods‚Äô positive present performance and some of their shortcomings, as well as indicating directions for future research concerning the methods‚Äô refinement and extension to help 3D building models become more effective components of the design process than they are at present, both with respect to these models‚Äô present levels of complexity and especially with respect to their anticipated increasing complexity in future.
keywords	CAD/CAE/BIM, content-based search, visual analytics
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2011_015
id	caadria2011_015
authors	Davis, Daniel; Flora Dilys Salim and Jane Burry
year	2011
title	Designing responsive architecture: Mediating analogue and digital modelling in the studio
doi	https://doi.org/10.52842/conf.caadria.2011.155
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 155-164
summary	Prototyping digitally responsive architecture requires that architects know how to program and design electronics. Normally they don’t. The challenge for teachers is to teach these skills whilst maintaining a focus on the design potentials of responsive architecture. One method is to teach students to use Input-Output-Process (IPO) diagrams and parametric modelling as pathways into the logic of responsive architecture. The paper discusses the work of students taught this way during a semester long elective. Our analysis shows that IPO diagrams lead to reactive architecture, which matches the current technical limitations of responsive architecture. We argue that mediating analogue and digital models is an essential aspect to successful responsive architecture.
keywords	Responsive architecture; physical interaction; education; parametric design
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2011_066
id	ecaade2011_066
authors	de Boissieu, Aurélie; Lecourtois, Caroline; Guéna, François
year	2011
title	“Operation of parametric modelling” and/or “operation of architectural conception”?: Expressing relationships in parametric modelling
doi	https://doi.org/10.52842/conf.ecaade.2011.530
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.530-538
summary	This research paper presents a specific understanding of the relations between parametric modelling activities and architectural conception activities. Our main question is: Can we make a distinction between cognitive operations of parametric modelling and cognitive operations of architectural conception? To shed light on this question, this paper is leaning on analyses of some uses of the parametric modeler Digital Project. The cases studies are students’ projects from two Architecture Studios: the Cross Over Studio of the Universität die Angewandte in Vienna; and the Studio P9 Digital Knowledge of the Ecole Nationale Supérieure d’Architecture de Paris Malaquais in Paris. Our main result is the observation of a distinction between cognitive operations of parametric modelling and cognitive operations of architectural conception. The distinction of these two kinds of operations leads at questioning the relation between them. We have questioned these relations in terms of induction from one to another. But some interesting merging of these two kinds of operations appeared also.
wos	WOS:000335665500061
keywords	Architectural design; parametric modelling; expressing relationship; Teaching; Digital Project
series	eCAADe
email
last changed	2022/05/01 23:21

_id	sigradi2011_361
id	sigradi2011_361
authors	El-Zanfaly, Dina
year	2011
title	Active Shapes. Introducing guidelines for designing kinetic architectural structures
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 176-179
summary	This paper proposes guidelines for designing kinetic architectural structures, in which rules based on Shape Grammars are used for motion capturing and design. There is an increasing demand for adaptive architecture that reconfigures itself physically to meet functional or climatic changes. These guidelines provide a way for the designer to describe and design novel kinetic structures. Based on Shape Grammars, the rule A ->t(A) is introduced. (A) means an Active Shape, that is a physical shape with motion observed or created by the designer.t(A) means a new Active Shape produced by applying one or more transformations t on the original Active Shape to produce a novel motion.
keywords	MotionGrammars; Kinetic Architectural Design; Shape Grammars.
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	ecaade2015_ws-robowood
id	ecaade2015_ws-robowood
authors	Hornung, Philipp; Johannes Braumann, Reinhold Krobath, Sigrid Brell-Cokcan and Georg Glaeser
year	2015
title	Robotic Woodcraft: Creating Tools for Digital Design and Fabrication
doi	https://doi.org/10.52842/conf.ecaade.2015.2.033
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 33-36
summary	Robotic Woodcraft is a transdisciplinary, arts-based investigation into robotic arms at the University for Applied Arts Vienna. Bringing together the craftsmen of the Department for Wood Technology, the geometers of the Department for Arts and Technology, the young industrial design office Lucy.D and the roboticists of the Association for Robots in Architecture, the research project explores new approaches on how to couple high-tech robotic arms with high-end wood fabrication. In the eCAADe workshop, participants are introduced to KUKA\|prc (parametric robot control, Braumann and Brell-Cokcan, 2011) and shown approaches on how to create their own digital fabrication tools for customized fabrication processes involving wood.
wos	WOS:000372316000004
keywords	Robotic woodcraft; Arts-based research; Robotic fabrication; Visual programming; Parametric robot control
series	eCAADe
last changed	2022/06/07 07:50

_id	cf2011_p073
id	cf2011_p073
authors	Nasirova, Diliara; Erhan Halil, Huang Andy T, Woodbury Robert, Riecke Bernhard E.
year	2011
title	Change Detection in 3D Parametric Systems: Human-Centered Interfaces for Change Visualization
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 751-764.
summary	The research on current parametric modeling systems concerns mainly about the underlying computational technology and designs produced; and emphasizes less human factors and design tasks. We observe users being challenged in interacting with these systems regardless of their expertise level. In these systems, user’s attention is divided on system-imposed actions such as tool selection and set-up, managing obscured views, frequent view manipulation, and switching between different types of representations. In essence, control of the system can become more demanding than the design task itself. We argue that this unbalanced emphasis inhibits one of the most important functions of parametric design: agility in exploration of design alternatives by applying frequent user-introduced or system-generated changes on the parametric design models. This compounded by the effect of cognitive limitations such as change blindness and shifts in locus of attention hinders change control and imposes an extra cognitive load in design. In this paper, we made a first step in developing a set of heuristics that is going to present how designers’ change control and detection can be improved. We experimented with three interfaces that control and visualize changes on three different compositions in relation to the designer’s locus of attention: on-model, peripheral and combined views. We measured designers’ performance as the number of changes detected, number of trials, and time required to complete each change detection task. The results support our hypothesis that change blindness significantly slows down and overloads design thinking, and thus should not be ignored. Furthermore, an interesting finding shows that visualizations on the visual periphery can equally support change detection as on-model visualizations, but it is significantly easier and faster to detect changes when they are visualized in both views. These findings can guide us to develop better interfaces in 3D parametric systems.
keywords	parametric design, change detection, change blindness, user-centered design, interface ergonomics, HCI, CAD, visualization
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2011_382
id	sigradi2011_382
authors	Pimentel, Diego; Causa, Emiliano; Cataldi, Mariano; Braida, Santiago
year	2011
title	Mundo Circular. Ejemplo low-tech de realidad aumentada e interfaces tangibles [Mundo Circular. Tangible interfaces and low-techaugmentedreality]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 294-297
summary	This work is about the relationship between socio-political matters and communications aspects in every country around the world. The data collected from ITU (International Telecommunication Union), UN, UNESCO, FAO (Food and Agriculture Organization), WTO and World Bank, show contrast among countries with more available resourcesand those who hasn't. The interface use augmented reality patterns to allow the user know the differences between the values expressed by each country, in a visual and intuitive way.
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	ecaade2011_029
id	ecaade2011_029
authors	Schindler, Christoph; Mbiti, Kyeni
year	2011
title	Urban Furniture: Introducing Parametric Modelling and Digital Fabrication in a Part-time Study
doi	https://doi.org/10.52842/conf.ecaade.2011.368
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.368-373
summary	This paper discusses a design course covering the complete process chain from parametric modelling to digital fabrication. The course was run as a 2-semester elective course at Hochschule für Technik Zürich (HSZ-T), a Swiss University of Applied Sciences that offers as the only school in Switzerland a Bachelor of Architecture as an extra-occupational part-time study (joining ZHAW in 2012). The design objective was to develop pieces of urban furniture with help of parametric modelling and fabricate them with digital tools. Each of the eleven objects was realized in collaboration with a different professional enterprise chosen by the student, which let us experience a wide range of different materials and production technologies.
wos	WOS:000335665500042
keywords	Parametric Modelling; Digital Fabrication; Furniture Design; Part-time study
series	eCAADe
email
last changed	2022/05/01 23:21

_id	sigradi2011_238
id	sigradi2011_238
authors	Spencer, Herbert; Spitz, Rejane
year	2011
title	MediaFranca: Rediseñando el Modelo Democrático [MediaFranca: Redesigning the Democratic Model]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 363-367
summary	Citizen engagement in public affairs is at the core of a healthy democracy. Nonetheless we must recognize that this is not often the case, and when it occurs it may not always be inclusive, coherent or constructive. While various digital services and social networks have created a new mode of public conversation, they have proved to be insufficient. The problem of democracy is way beyond the reach of an individual service or platform if we don't agree in a general framework for a digital open-mesh for democracy. As we identify the necessity for a new mode of participation, we examine socialinteraction patterns for public deliberation and collaboration for presenting a general design framework for e-government structured around user-experience and social co-experience.
keywords	e-democracy; e-government; social software; interaction design; metadesign
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	sigradi2011_299
id	sigradi2011_299
authors	Téllez Bohórquez, Andres
year	2011
title	Computación e identidad visual corporativa [Computation and corporate visual identity]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 372-375
summary	The adoption of computation in the design process has opened this discipline to new dynamics and challenges. Programming has impacted how designers conceive and produce form, including how corporate identity is designed, consumed and understood. A recent trend in design has introduced logo systems that use multiple iterations of a mark, usually created with a computer algorithm. This article proposes a methodology to use the potential of computation in corporate identity design and a reflection about the role of the designer in this process.
keywords	Computation; corporate identity; computer-aided-design; algorithmic logo; fluid identity
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	caadria2021_231
id	caadria2021_231
authors	Wong, Kwan Ki Calvin and van Ameijde, Jeroen
year	2021
title	In-Between Spaces: Data-driven Analysis and Generative Design for Public Housing Estate Layouts
doi	https://doi.org/10.52842/conf.caadria.2021.2.397
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 2, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 397-406
summary	As Hong Kong constructs increasingly high-density, high-rise public housing estates to increase land use efficiency, public in-between spaces are more constrained, which impacts the quality of social relations, movements and daily practices of residents (Shelton et al. 2011; Tang et al. 2019). Current planning practices are focused on the achievement of quantitative performance measures, rather than qualitative design considerations that support residents experiences and community interaction. This paper presents a new methodology that combines urban analysis and generative design for the regeneration of social housing estates, based on the spatial and social qualities of their in-between spaces.
keywords	Social Housing; Public Open Space; Generative Design; Urban Planning
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_022
id	ecaade2011_022
authors	Achten, Henri
year	2011
title	Degrees of Interaction: Towards a Classification
doi	https://doi.org/10.52842/conf.ecaade.2011.565
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.565-572
summary	In architecture various approaches have been developed do deal with changing demands on the building. The most recent development is interactive architecture. In this paper we aim to outline what interactive architecture is. First we define the type of performance behavior that an interactive building or environment has. Following, we consider the relation between the system and the user. We derive four types of relations, characterized as “perfect butler,” “partner,” “environmental,” and “wizard.” Interactive systems are composed of sensors, controllers, actuators, and materials. Various degrees of interactivity can be achieved with such systems, ranging from passive, reactive, autonomous, to agent systems. Complete with earlier discussion of design methods this provides the range of aspects that should be considered when designing interactive architecture.
wos	WOS:000335665500065
keywords	Interactive architecture; Human-Computer interaction; design theory
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_017
id	ecaade2011_017
authors	Achten, Henri; Koszewski, Krzysztof; Martens, Bob
year	2011
title	What happened after the “Hype” on Virtual Design Studios?: Some Considerations for a Roundtable Discussion
doi	https://doi.org/10.52842/conf.ecaade.2011.023
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.23-32
summary	The issue of collaborative design has been elaborated extensively within the framework of previous CAAD–conferences. Today, an appreciation for traditional attitudes and methods can be observed, but interestingly, a mixture of approaches is also noticeable (computational techniques used in low–tech fabrication environments, for example). This allows for a round–table survey of the current state–of–the–art focused on experiences related to distant learning in the architectural curriculum. To make VDS viable, not only are technological solutions necessary, but so are social (among people) and professional (ways of behavior) ones. In this round–table we aim to identify critical factors of success (or failure).
wos	WOS:000335665500001
keywords	Education; architectural curriculum; blended learning; collaborative design; VDS
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ijac201310105
id	ijac201310105
authors	Agkathidis, Asterios and Andre_ Brown
year	2013
title	Tree-Structure Canopy:A Case Study in Design and Fabrication of Complex Steel Structures using Digital Tools
source	International Journal of Architectural Computing vol. 11 - no. 1, 87-104
summary	This paper describes and reflects on the design and manufacturing process of the Tree-Structure canopy for the WestendGate Tower in Frankfurt upon Main, completed early 2011.The project investigated fabrication and assembly principles of complex steel structures as well as the integration of contemporary computational design, engineering, optimization and simulation techniques in a collaborative design approach. This paper focuses on the notion of modular standardization as opposed to non standard customized components. It also engages with issues relating to digital production tools and their impact on construction cost, material performance and tolerances. In addition it examines the reconfiguration of liability during a planning and construction process, an aspect which can be strongly determined by fabrication companies rather than the architect or designer.This paper is written as a reflection on the complete building process when contemporary digital tools are used from design through to fabrication. It studies both the generation of the steel structure as well the ETFE cushion skin. It reports on a collaborative project, where the main author was responsible for the canopies design, parameterization, digitalization and fabrication, as well as for the dissemination of the outcomes and findings during the design and realization process.As such it represents an example of research through design in a contemporary and evolving field.The canopy received a design award by the Hellenic Architecture Association.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2011_099
id	ecaade2011_099
authors	Ahlquist, Sean; Menges, Achim
year	2011
title	Methodological Approach for the Integration of Material Information and Performance in the Design Computation for Tension-Active Architectural Systems
doi	https://doi.org/10.52842/conf.ecaade.2011.799
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.799-808
summary	As computational design processes have moved from representation to simulation, the focus has shifted towards advanced integration of performance as a form defining measure. Performance, though, is often assessed purely on the level of geometry and stratified between hierarchically independent layers. When looking at tension-active membrane systems, performance is integrated across multiple levels and with only the membrane material itself, defining the structural, spatial and atmospheric qualities. The research described in this paper investigates the integrative nature of this type of lightweight structure and proposes methodologies for generating highly articulated and differentiated systems. As material is a critical component, the research focuses on a system-based approach which places priority on the inclusion of material research and parameterization into a behavior-based computational process.
wos	WOS:000335665500092
keywords	Material behavior; material computation; system; gestalt; tension-active system
series	eCAADe
email
last changed	2022/05/01 23:21

_id	acadia11_82
id	acadia11_82
authors	Ahlquist, Sean; Menges, Achim
year	2011
title	Behavior-based Computational Design Methodologies: Integrative processes for force defined material structures
doi	https://doi.org/10.52842/conf.acadia.2011.082
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 82-89
summary	With the introduction of physics-based algorithms and modeling environments, design processes have been shifting from the representation of materiality to the simulation of approximate material descriptions. Such computational processes are based upon enacting physical and material behavior, such as gravity, drag, tension, bending, and inflation, within a generative modeling environment. What is often lacking from this strategy is an overall understanding of computational design; that information of increasing value and precision is generated through the development and iterative execution of specific principles and integrative mechanisms. The value of a physics-based modeling method as an information engine is often overlooked, though, as they are primarily utilized for developing representational diagrams or static geometry – inevitably translated to function outside of the physical bounds and parameters defined with the modeling process. The definition of computational design provides a link between process and a larger approach towards architecture – an integrative behavior-based process which develops dynamic specific architectural systems interrelated in their material, spatial, and environmental nature. This paper, focusing on material integration, describes the relation of a computational design approach and the technical framework for a behavior-based integrative process. The application is in the development of complex tension-active architectural systems. The material behavior of tensile meshes and surfaces is integrated and algorithmically calibrated to allow for complex geometries to be materialized as physical systems. Ultimately, this research proposes a computational structure by which material and other sorts of spatial or structural behaviors can be activated within a generative design environment.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
doi	https://doi.org/10.52842/conf.acadia.2012.047
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2011_052
id	caadria2011_052
authors	Al-Kazzaz, Dhuha A. and Alan Bridges
year	2011
title	Assessing innovation in hybrid designs using shape grammars
doi	https://doi.org/10.52842/conf.caadria.2011.545
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 545-554
summary	Al-kazzaz et al (2010) described hybrid adaption technique to generate innovative designs from heterogeneous precedents using shape grammars. An evaluation of the degree of innovation in the hybrid designs gave feedback to grammar users before and after applying a rule. Innovation was assessed using variables derived from the internal structure of the grammar such as: the number of antecedents in the corpus having the same rule; the number of rules in a subclass rule set having the same geometry; etc. However, the validity of the innovation assessment was unclear and the use of the feedback measures was not demonstrated. Accordingly, this study aims to verify the credibility of the innovation measures and to identify the independent variables that a user can control to achieve a significant impact on each innovation measure as a dependent variable.
keywords	Shape grammars; hybrid design; innovation assessment
series	CAADRIA
email
last changed	2022/06/07 07:54

For more results click below: