Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 983

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
doi	https://doi.org/10.52842/conf.acadia.2012.047
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2011_032
id	caadria2011_032
authors	Barker, Tom; Nicole Gardner, M. Hank Haeusler and Martin Tomitsch
year	2011
title	Last train to trancentral: From infrastructure to ‘info’structure: a case study of embedding digital technology into existing public transport infrastructures
doi	https://doi.org/10.52842/conf.caadria.2011.335
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 335-344
summary	The research presented in this paper is an investigation into how ubiquitous computing technologies can contribute to improving the quality of existing public transport environments through the integration of responsive technologies. The paper argues that given the significant challenges associated with transport infrastructure expansion including cost, disruption, energy use, and implementation periods augmenting existing transport environments offers alternate measures to manage demand and improve the user experience. The paper proposes improving transport environments by integrating smart, or responsive, digital information into the existing physical fabric in a coherent architectural and spatial context. This approach offers an opportunity to shift away from the static nature of public transport infrastructure to the dynamic notion of public transport ‘info’structure. The research uses an architecture graduate studio as a foundation to investigate the objectives. The contribution of this paper is an investigation of ways in which digital technologies and networked communications can transform and augment public transport infrastructure, allowing new forms of intelligent, adaptive, interactive and self-aware architecture to be developed.
keywords	Urban Informatics; media facades; public transport; responsive technologies; smart environments
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2011_p098
id	cf2011_p098
authors	Bernal, Marcelo; Eastman Charles
year	2011
title	Top-down Approach for Interaction of Knowledge-Based Parametric Objects and Preliminary Massing Studies for Decision Making in Early Design Stages
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 149-164.
summary	Design activities vary from high-degree of freedom in early concept design stages to highly constrained solution spaces in late ones. Such late developments entail large amount of expertise from technical domains. Multiple parallel models handle different aspects of a project, from geometric master models to specific building components. This variety of models must keep consistency with the design intent while they are dealing with specific domains of knowledge such as architectural design, structure, HVAC, MEP, or plumbing systems. Most of the expertise embedded within the above domains can be translated into parametric objects by capturing design and engineering knowledge through parameters, constraints, or conditionals. The aim of this research is capturing such expertise into knowledge-based parametric objects (KPO) for re-usability along the design process. The proposed case study ‚Äì provided by SOM New York‚ is the interaction between a massing study of a high-rise and its building service core, which at the same time handles elevators, restrooms, emergency stairs, and space for technical systems. This project is focused on capturing design expertise, involved in the definition of a building service core, from a high-rise senior designer, and re-using this object for interaction in real-time with a preliminary massing study model of a building, which will drive the adaption process of the service core. This interaction attempts to provide an integrated design environment for feedback from technical domains to early design stages for decision-making, and generate a well-defined first building draft. The challenges addressed to drive the instantiation of the service core according to the shifting characteristics of the high-rise are automatic instantiation and adaptation of objects based on decision rules, and updating in real-time shared parameters and information derived from the high-rise massing study. The interaction between both models facilitates the process from the designer‚Äôs perspective of reusing previous design solutions in new projects. The massing study model is the component that handles information from the perspective of the outer shape design intent. Variations at this massing study model level drive the behavior of the service core model, which must adapt its configuration to the shifting geometry of the building during design exploration in early concept design stages. These variations depend on a list of inputs derived from multiple sources such as variable lot sizes, building type, variable square footage of the building, considerations about modularity, number of stories, floor-to-floor height, total building height, or total building square footage. The shifting combination of this set of parameters determines the final aspect of the building and, consequently, the final configuration of the service core. The service core is the second component involved in the automatic generation of a building draft. In the context of BIM, it is an assembly of objects, which contains other objects representing elevators, restrooms, emergency stairs, and space for several technical systems. This assembly is driven by different layouts depending on the building type, a drop-off sequence, which is the process of continuous reduction of elevators along the building, and how this reduction affects the re-arrangement of the service core layout. Results from this research involves a methodology for capturing design knowledge, a methodology for defining the architecture of smart parametric objects, and a method for real-time-feedback for decision making in early design stages. The project also wants to demonstrate the feasibility of continuous growth on top of existing parametric objects allowing the creation of libraries of smart re-usable objects for automation in design.
keywords	design automation, parametric modeling, design rules, knowledge-based design
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia11_318
id	acadia11_318
authors	Doumpioti,Christina
year	2011
title	Responsive and Autonomous Material Interfaces
doi	https://doi.org/10.52842/conf.acadia.2011.318
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 318-325
summary	This paper presents continuing research on responsive systems in architecture; the ability of architectural systems to change certain properties in response to their surrounding environmental pressures. While doing so, it shifts from current and past examples of mechanical approaches of adaptation, towards biological paradigms of seamless material integration. Looking at biological mechanisms of growth and focusing on the material make-up behind them, the research proposes the exploration of material systems in a two-fold interrelated manner: firstly, through passive material systems of variable elasticity, and secondly through the embedment of smart materials with shape-changing properties. The combination of the two is aiming at architectural systems of functional versatility.Through an interdisciplinary approach, the paper examines the following questions: Is it possible to envisage structures that share the principles of adaptation and response of living organisms? What are the technological challenges faced when designing self-actuated responsive interfaces? Which is the conceptual framework for understanding and investigating complex adaptive and responsive systems? By exploring and synthesizing theories and tools from material science, bioengineering and cybernetics the aim is to inform architectural interfaces able to enhance interconnectivity between the man-made and the natural. Focusing on the self-organization of material systems the intention is to suggest architectural interventions, which become sub-systems of their ecological milieu. The emphasis therefore is placed not on architectural formalism, but on how we can define synthetic environments through constant exchanges of energy, matter and information.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	cf2011_p099
id	cf2011_p099
authors	Huang, Andy; Erhan Halil, Woodbury Robert, Nasirova Diliara, Kozlova Karine
year	2011
title	Collaboration Workflow Simplified: Reduction of Device Overhead for Integrated Design Collaboration
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 591-602.
summary	Design collaboration relies on cognitive tools such as analog media and digital peripheral devices, and shows the characteristics of distributed cognition. It is a social and complex activity involving multiple agents communicating and using external cognitive tools to encode, decode, and share information in the process of collaborative task completion. The systems supporting this activity should meet the ’principle of least collaboration effort’ [4] that proposes that agents in collaboration minimize their effort in presentation and acceptance of information. Yet, current collaboration systems are dispersed mixed media that is often overloaded with representations and functionality, thus preventing seam- less information sharing. Designers are required to spend extra effort collecting information using peripheral devices and in system management when sharing information. The goal of this study is to understand these overheads in infor- mation collection and sharing using peripheral devices, and to provide designers with a supportive platform to enhance collaboration using both analog and digital media. In this paper, we first review available peripheral devices such as smart pens, digital cameras, and voice recorders, as well as existing collaboration sup- porting software systems for their benefits and deficiencies in collaboration. We then present ’DiNa’, a collaboration platform that is envisioned to improve pro- ductivity and reduce redundant work by integrating peripheral devices into the collaboration workflow. We demonstrate a possible workflow using this system through several scenarios where designers collaborate in performing a series of design tasks. We hope to bring attention to the importance least collaborative effort in designing systems to support real-world collaboration.
keywords	Collaboration, Peripheral Devices, Knowledge Collection, Human Computer Interaction, Computer Aided Design
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2011_019
id	caadria2011_019
authors	Lee, Ju Hyun and Mi Jeong Kim
year	2011
title	A context immersion of mixed reality at a new stage
doi	https://doi.org/10.52842/conf.caadria.2011.199
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 199-208
summary	This paper presents a novel approach to the potential of mixed reality embodied in smart phones and ubiquitous environments. We analyzed the related works to the concept of context and mobile computing and then investigated into leading companies by interviewing senior manages of the mixed reality (MR) projects in Korea. As a result, the concept of context immersion is proposed for describing the various context relationships among the real locations, objects and persons. By considering the MR environments as a converged world, this paper characterizes the context immersion as the combination of the time & location-based, object-based and user-based contexts. Through the context immersion, users can be connected to the real life, not limited to the imagery world, thus experiencing strong immersion in the MR environments. At the end, we present the development direction for the future with a focus on the MR contents rather than the technical aspects.
keywords	Context Immersion; Mixed Reality; Augmented Reality; Ubiquitous Computing; Mobile Computing
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	sigradi2018_1405
id	sigradi2018_1405
authors	Massara Rocha, Bruno; Santo Athié, Katherine
year	2018
title	Emerging senses from Smart Cities phenomenon
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 434-441
summary	The paper analyses the emerging senses from the Smart Cities phenomenon, using as background Lemos (2017), Maia (2013), Rozestraten (2016), Söderström, Paache & Klauser (2014) and evaluating the speeches found in the SmartCity Expo Curitiba. We identified three basic senses: the binary utopia/ficcion, business and informational city, discussed by philosophers such as Foucault (2017), Lévy (2011) e Harvey (2014). The results outline the importance of political role of technology and adverts that it must not be controlled by business. Finally, the paper concludes that the smartest technology is one that opens space to the inclusion of greater human expressivity and subjectivity, not inducing a space of control.
keywords	Smart cities; Digital technologies; Technopolitics;
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia17_512
id	acadia17_512
authors	Rossi, Andrea; Tessmann, Oliver
year	2017
title	Collaborative Assembly of Digital Materials
doi	https://doi.org/10.52842/conf.acadia.2017.512
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 512- 521
summary	Current developments in design-to-production workflows aim to allow architects to quickly prototype designs that result from advanced design processes while also embedding the constraints imposed by selected fabrication equipment. However, the enduring physical separation between design space and fabrication space, together with a continuous approach to both design, via NURBs modeling software, and fabrication, through irreversible material processing methods, limit the possibilities to extend the advantages of a “digital” approach (Ward 2010), such as full editability and reversibility, to physical realizations. In response to such issues, this paper proposes a processto allow the concurrent design and fabrication of discrete structures in a collaborative process between human designer and a 6-axis robotic arm. This requires the development of design and materialization procedures for discrete aggregations, including the modeling of assembly constraints, as well as the establishment of a communication platform between human and machine actors. This intends to offer methods to increase the accessibility of discrete design methodologies, as well as to hint at possibilities for overcoming the division between design and manufacturing (Carpo 2011; Bard et al. 2014), thus allowing intuitive design decisions to be integrated directly within assembly processes (Johns 2014).
keywords	material and construction; construction/robotics; smart assembly/construction; generative system
series	ACADIA
email
last changed	2022/06/07 07:56

_id	cf2011_p095
id	cf2011_p095
authors	Shin, Dongyoun; Muller Arisona Stefan, Schmitt Gerhard
year	2011
title	Crowdsourcing Urban Simulation Platform Using Mobile Devices and Social Networking Media Technologies
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 233-246.
summary	Introduction and Research Questions The research area of urban simulation methods has grown notably in recent decades. Most of the research topics that concern urban simulation have concentrated on defining the complexities of urban environments with certain rules and algorithms. However, cities are getting more complex and changes to them are being made at greater speed. Therefore, current urban simulation modeling approaches based on rules and protocols are still struggling to reduce the gap between the virtual simulation environment and the real cities, since the behavior of citizens is frequently unpredictable and continuously adapting. In this context, research is necessary to develop more fundamental simulation methods that can handle these complexities and changes, leading to new design decision support systems. Therefore, this research was motivated with the following questions: What is the origin of the complexities and transformations of the urban environment? How can we approach the origin to deal with the urban complexities and transformations? To answer these questions, we hypothesize that the diverse human intentions are the origin of the issues that result from all of the complexities and changes of the cities. General Objectives As a result, we propose a participatory simulation environment that brings human intention into the urban simulator: a crowdsourcing [1] simulation platform that is operated by the people‚Äôs participation. To achieve this crowdsourcing urban sustainability simulation environment, we must address the following research issues: categorization of urban sustainability indicators and technologies, inducing mass participations, and an implementation of social network services. Furthermore, we aim at using mobile computing devices, such as smart phones, as a terminal to the simulation environment. Fundamental Goals Our goal is to enable people to share urban information at any time and to compare each other‚Äôs contributions through the crowdsourcing urban simulation platform. The information will be returned to the citizens to support their sustainability-aware life. The simulation platform also gives a chance not only to compare each other‚Äôs levels of sustainability, but also to give self-satisfaction through an altruistic contribution for a sustainable future. Thus, people shall utilize the simulator in order to predict their individual or cities‚Äô future sustainability. Meanwhile, the user data will be collected and delivered to the central server in order to analyze the urban sustainability. Consequently, we can measure the urban sustainability based on a real human interaction, and compare individuals as well as cities. The whole process of this research is presented as a new paradigm of an urban simulator that reflects the urban complexities and the inconstant human mind changes. Specific Objectives of This Paper This paper will represent strategies of the crowdsourcing urban simulation which can make a paradigm shift of urban simulation and shall define the customized sustainable indicators for the initial steps of this research. It shows how as system for can communicate with the public using the current technologies: high performance mobile media, social network services and wide-area geospatial information systems. Furthermore, for the first step of this research, the paper defines the urban sustainability indicators, and their categorization is generalized and translated into simpler ways to support the citizen‚ intuitive understanding.
keywords	Crowdsourcing, Urban sustainability, Multi-agent based simulation, Social network services
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2011_034
id	caadria2011_034
authors	Wakita, Akira; Akito Nakano and Michihiko Ueno
year	2011
title	SMAAD Surface: A tangible interface for smart material aided architectural design
doi	https://doi.org/10.52842/conf.caadria.2011.355
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 355-364
summary	In this paper, we present Smart Material Aided Architectural Design (SMAAD), the design technique to realize intuitive shape modelling with synchronizing a tangible user interface (TUI) and a 3D CAD system. To realize SMAAD, we first implemented SMAAD Surface, the TUI that imitates the free-form surface. The TUI is a fabric device, in which flex sensors and actuators (shape memory alloys) are embedded. As a designer changes the textile shape using his/her hands, its surface data will be sent to the CAD system through the sensor and a free-form surface can be created in the PC. The operation in the opposite direction is also possible, in which the CAD surface data is sent to the fabric device to dynamically change its shape. SMAAD releases architectural designers from complex GUI operations and visual programming and enables digital model creation through natural manual operations for physical models.
keywords	Smart materials; tangible user interfaces; surface modelling; algorithmic design
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ecaade2020_143
id	ecaade2020_143
authors	Ilyas, Sobia, Wang, Xinyue, Li, Wenting, Zhang, Zhuoqun, Wang, Tsung-Hsien and Peng, Chengzhi
year	2020
title	Towards an Interactionist Model of Cognizant Architecture - A sentient maze built with swarm intelligence
doi	https://doi.org/10.52842/conf.ecaade.2020.2.201
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 201-208
summary	Cognizant Architecture is a term used to define sentient and smart structures broadly. In this paper, an 'Interactionist' model of cognizant architecture is proposed as a method of investigating the development process by inverting the conventional concept of maze design. The proposed 'Cognizant Maze' aims to achieve user-architecture micro-interactions through delighting the users, presenting a physical activity equally attractive to kids and adults alike, and activating mind-enticing visual effects. Like many previous innovations, nature is what inspires us in the maze-making process. In modelling the cognizant maze, we develop the concept and workflow of prototyping a form of swarm intelligence. We are particularly interested in exploring how simulated behaviours of swarm intelligence can be manifested in a maze environment for micro-interactions to take place. Combining parametric modelling and Arduino-based physical computing, our current interactive prototyping shows how the maze and its users can 'think, act and play' with each other, hence achieving an interactionist model of cognizant architecture. We reflect that the lessons learned from the Cognizant Maze experiment may lead to further development of cognizant architecture as a propagation of swarm intelligence through multi-layered micro-interactions.
keywords	swarm intelligence; maze design; Micro-interactions; interactive prototyping; cognizant architecture
series	eCAADe
email
last changed	2022/06/07 07:50

_id	acadia13_137
id	acadia13_137
authors	Kretzer, Manuel; In, Jessica; Letkemann, Joel; Jaskiewicz, Tomasz
year	2013
title	Resinance: A (Smart) Material Ecology
doi	https://doi.org/10.52842/conf.acadia.2013.137
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 137-146
summary	What if we had materials that weren’t solid and static like traditional building materials are? What if these materials could dynamically change and adapt to varying environmental situations and stimulations and evolve and learn over time? What if they were autonomous, self-sufficient and independent but could communicate with each other and exchange information? What would this “living matter” mean for architecture and the way we perceive the built environment? This paper looks briefly at current concepts and investigations in regards to programmable matter that occupy various areas of architectural research. It then goes into detail in describing the most recent smart material installation “Resinance” that was supervised by Manuel Kretzer and Benjamin Dillenburger and realized by the 2012/13 Master of Advanced Studies class as part of the materiability research at the Chair for CAAD, ETH Zürich in March 2013. The highly speculative sculpture links approaches in generative design, digital fabrication, physical/ubiquitous computing, distributed networks, swarm behavior and agent-based communication with bioinspiration and organic simulation in a responsive entity that reacts to user input and adapts its behavior over time.
keywords	Smart Materials; Distributed Networks; Digital Fabrication; Physical Computing; Responsive Environment
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:51

_id	ecaade2020_053
id	ecaade2020_053
authors	Ren, Yue, Chu, Jie and Zheng, Hao
year	2020
title	Dynamic Symbiont - An Interactive Urban Design Method Combining Swarm Intelligence and Human Decisions
doi	https://doi.org/10.52842/conf.ecaade.2020.1.383
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 383-392
summary	Can a virtual city game be built by both the public and computer-based on real-site data? In the current process of deepening global connectivity, requirements for an effective urban design are no longer limited to functions or aesthetics, but a smart, dynamic complex with multi-interactions of data, group behaviours, and physical space. This paper introduces the logic of swarm intelligence and particle system for proposing a new urban design methodology. The platforms range from simulations that quantify the impact of the disruptive interventions of city activities to communicable collaboration between different users in a UI system, which creates virtual connections between optimized urbanscape and users. In the design system, based on the context data, the computer firstly simulates and optimizes the existing 2D activity joints between the people and analyzed the current spatial connection nodes into certain design rules. Through optimal programming for spatial connection and data iterations, the activity connection structures in the second simulation are abstracted into a set of interactive 3D topographic. The final data-visualization results are presented as a co-building megacity in a virtual construction game. Users can choose the virtual building unit types and intuitively influence the future urbanscape decision through virtual construction.
keywords	Swarm Intelligence; Particle System; Digital Simulation; Human-Machine Interaction; Data Visualization
series	eCAADe
email
last changed	2022/06/07 07:56

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_022
id	ecaade2011_022
authors	Achten, Henri
year	2011
title	Degrees of Interaction: Towards a Classification
doi	https://doi.org/10.52842/conf.ecaade.2011.565
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.565-572
summary	In architecture various approaches have been developed do deal with changing demands on the building. The most recent development is interactive architecture. In this paper we aim to outline what interactive architecture is. First we define the type of performance behavior that an interactive building or environment has. Following, we consider the relation between the system and the user. We derive four types of relations, characterized as “perfect butler,” “partner,” “environmental,” and “wizard.” Interactive systems are composed of sensors, controllers, actuators, and materials. Various degrees of interactivity can be achieved with such systems, ranging from passive, reactive, autonomous, to agent systems. Complete with earlier discussion of design methods this provides the range of aspects that should be considered when designing interactive architecture.
wos	WOS:000335665500065
keywords	Interactive architecture; Human-Computer interaction; design theory
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_017
id	ecaade2011_017
authors	Achten, Henri; Koszewski, Krzysztof; Martens, Bob
year	2011
title	What happened after the “Hype” on Virtual Design Studios?: Some Considerations for a Roundtable Discussion
doi	https://doi.org/10.52842/conf.ecaade.2011.023
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.23-32
summary	The issue of collaborative design has been elaborated extensively within the framework of previous CAAD–conferences. Today, an appreciation for traditional attitudes and methods can be observed, but interestingly, a mixture of approaches is also noticeable (computational techniques used in low–tech fabrication environments, for example). This allows for a round–table survey of the current state–of–the–art focused on experiences related to distant learning in the architectural curriculum. To make VDS viable, not only are technological solutions necessary, but so are social (among people) and professional (ways of behavior) ones. In this round–table we aim to identify critical factors of success (or failure).
wos	WOS:000335665500001
keywords	Education; architectural curriculum; blended learning; collaborative design; VDS
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ijac201310105
id	ijac201310105
authors	Agkathidis, Asterios and Andre_ Brown
year	2013
title	Tree-Structure Canopy:A Case Study in Design and Fabrication of Complex Steel Structures using Digital Tools
source	International Journal of Architectural Computing vol. 11 - no. 1, 87-104
summary	This paper describes and reflects on the design and manufacturing process of the Tree-Structure canopy for the WestendGate Tower in Frankfurt upon Main, completed early 2011.The project investigated fabrication and assembly principles of complex steel structures as well as the integration of contemporary computational design, engineering, optimization and simulation techniques in a collaborative design approach. This paper focuses on the notion of modular standardization as opposed to non standard customized components. It also engages with issues relating to digital production tools and their impact on construction cost, material performance and tolerances. In addition it examines the reconfiguration of liability during a planning and construction process, an aspect which can be strongly determined by fabrication companies rather than the architect or designer.This paper is written as a reflection on the complete building process when contemporary digital tools are used from design through to fabrication. It studies both the generation of the steel structure as well the ETFE cushion skin. It reports on a collaborative project, where the main author was responsible for the canopies design, parameterization, digitalization and fabrication, as well as for the dissemination of the outcomes and findings during the design and realization process.As such it represents an example of research through design in a contemporary and evolving field.The canopy received a design award by the Hellenic Architecture Association.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2011_099
id	ecaade2011_099
authors	Ahlquist, Sean; Menges, Achim
year	2011
title	Methodological Approach for the Integration of Material Information and Performance in the Design Computation for Tension-Active Architectural Systems
doi	https://doi.org/10.52842/conf.ecaade.2011.799
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.799-808
summary	As computational design processes have moved from representation to simulation, the focus has shifted towards advanced integration of performance as a form defining measure. Performance, though, is often assessed purely on the level of geometry and stratified between hierarchically independent layers. When looking at tension-active membrane systems, performance is integrated across multiple levels and with only the membrane material itself, defining the structural, spatial and atmospheric qualities. The research described in this paper investigates the integrative nature of this type of lightweight structure and proposes methodologies for generating highly articulated and differentiated systems. As material is a critical component, the research focuses on a system-based approach which places priority on the inclusion of material research and parameterization into a behavior-based computational process.
wos	WOS:000335665500092
keywords	Material behavior; material computation; system; gestalt; tension-active system
series	eCAADe
email
last changed	2022/05/01 23:21

_id	acadia11_82
id	acadia11_82
authors	Ahlquist, Sean; Menges, Achim
year	2011
title	Behavior-based Computational Design Methodologies: Integrative processes for force defined material structures
doi	https://doi.org/10.52842/conf.acadia.2011.082
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 82-89
summary	With the introduction of physics-based algorithms and modeling environments, design processes have been shifting from the representation of materiality to the simulation of approximate material descriptions. Such computational processes are based upon enacting physical and material behavior, such as gravity, drag, tension, bending, and inflation, within a generative modeling environment. What is often lacking from this strategy is an overall understanding of computational design; that information of increasing value and precision is generated through the development and iterative execution of specific principles and integrative mechanisms. The value of a physics-based modeling method as an information engine is often overlooked, though, as they are primarily utilized for developing representational diagrams or static geometry – inevitably translated to function outside of the physical bounds and parameters defined with the modeling process. The definition of computational design provides a link between process and a larger approach towards architecture – an integrative behavior-based process which develops dynamic specific architectural systems interrelated in their material, spatial, and environmental nature. This paper, focusing on material integration, describes the relation of a computational design approach and the technical framework for a behavior-based integrative process. The application is in the development of complex tension-active architectural systems. The material behavior of tensile meshes and surfaces is integrated and algorithmically calibrated to allow for complex geometries to be materialized as physical systems. Ultimately, this research proposes a computational structure by which material and other sorts of spatial or structural behaviors can be activated within a generative design environment.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2011_052
id	caadria2011_052
authors	Al-Kazzaz, Dhuha A. and Alan Bridges
year	2011
title	Assessing innovation in hybrid designs using shape grammars
doi	https://doi.org/10.52842/conf.caadria.2011.545
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 545-554
summary	Al-kazzaz et al (2010) described hybrid adaption technique to generate innovative designs from heterogeneous precedents using shape grammars. An evaluation of the degree of innovation in the hybrid designs gave feedback to grammar users before and after applying a rule. Innovation was assessed using variables derived from the internal structure of the grammar such as: the number of antecedents in the corpus having the same rule; the number of rules in a subclass rule set having the same geometry; etc. However, the validity of the innovation assessment was unclear and the use of the feedback measures was not demonstrated. Accordingly, this study aims to verify the credibility of the innovation measures and to identify the independent variables that a user can control to achieve a significant impact on each innovation measure as a dependent variable.
keywords	Shape grammars; hybrid design; innovation assessment
series	CAADRIA
email
last changed	2022/06/07 07:54

For more results click below: