Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 572

Reformat results as: short short into frame detailed detailed into frame

_id	ijac201210303
id	ijac201210303
authors	Bohnenberger, Sascha; Chin Koi Khoo, Daniel Davis, et al.
year	2012
title	Sensing Material Systems - Novel Design Strategies
source	International Journal of Architectural Computing vol. 10 - no. 3, 361-375
summary	The development of new building materials has decisively influenced the progression of architecture through the link between built form and available material systems. The new generation of engineered materials are no exception. However, to fully utilise these materials in the design process, there is a need for designers to understand how these new materials perform. In this paper we propose a method for sensing and representing the response of materials to external stimuli, at the early design stage, to help the designer establish a material awareness. We present a novel approach for embedding capacitive sensors into material models in order to improve material performance of designs. The method was applied and tested during two workshops, both discussed in this paper. The outcome is a method for anticipating engineered material behaviour.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2012_91
id	ecaade2012_91
authors	Khoo, Chin Koi
year	2012
title	Sensory Morphing Skins
doi	https://doi.org/10.52842/conf.ecaade.2012.2.221
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 221-229
summary	Contemporary responsive architecture often tries to achieve optimised building performance in response to changing environmental conditions. In the precedents a key area of responsiveness is in the building façades or skins. Often however, the skin is made from discrete components and separated equipment. T his research explores the potential for designing responsive architectural morphing skins with kinetic materials that have integrated sensing and luminous abilities. Instead of embedded individual discrete components, this approach intends to integrate the sensing devices and building skins as one ‘single’ entity. This investigation is conducted by project. The project is Blanket, which aims to provide an alternative approach for a lightweight, fl exible and economical sensory architectural skin that respond to proximity and lighting stimuli.
wos	WOS:000330320600022
keywords	Sensing; responsive; morphing skin; kinetic and phosphorescence materials
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaadesigradi2019_262
id	ecaadesigradi2019_262
authors	Globa, Anastasia, Costin, Glenn, Wang, Rui, Khoo, Chin Koi and Moloney, Jules
year	2019
title	Hybrid Environmental-Media Facade - Full-Scale Prototype Panel Fabrication
doi	https://doi.org/10.52842/conf.ecaade.2019.2.685
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 685-694
summary	This paper reports the design, fabrication and evaluation strategies of full-scale aluminium panel prototypes developed for a kinetic hybrid facade system. The concept of a hybrid facade system was proposed as a solution to maximise the value of kinetic intelligent building systems by repurposing the animation sunscreening as a low-resolution media display. The overarching research project investigates the potential, feasibility and real-life applications of a hybrid facade that integrates the: environmental, media and individual micro-control functions in one compound system that operates through autonomous wirelessly controlled hexagonal rotating panels. The study explores new ways of communication and connectivity in architectural and urban context, utilising and fusing together a wide range of technologies including: artificial intelligence, robotics, wireless control technologies, calibration of physical and digital simulations, development of fully autonomous self-organised and powered units and the use of additive digital manufacturing. This article reports the third research stage of the hybrid facade project development - the manufacture of full scale panel prototypes.
keywords	kinetic facade; digital fabrication; full-scale prototype; intelligent building systems; hybrid facade
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:51

_id	caadria2011_014
id	caadria2011_014
authors	Khoo, Chin Koi and Flora Dilys Salim
year	2011
title	Designing elastic transformable structures: Towards soft responsive architecture
doi	https://doi.org/10.52842/conf.caadria.2011.143
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 143-152
summary	This paper discusses the issues of designing and building environment involving spatial conditions that can be physically reconfigured to meet changing needs. To achieve this architectural vision, most current research focuses on the kinetic, mechanical systems and physical control mechanisms for actuation and structural transformation. Instead of the ‘hard’ mechanical joints and components, there is an unexplored ‘soft’ approach using lightweight elastic composite materials for designing responsive architectural skins and structures. This paper investigates the new possibilities for the manipulation of various architectural enclosures using ‘soft’ and elastic transformable structures, in response to environmental, communication and adapting to various contexts. This approach intends to minimise the mechanistic actuations and reduce weight for such operations. Therefore, this research introduces two modules (a tetrahedron and a cube) as responsive spatial models to test the potentials and limitations for the implementation of elastic materials with responsive capability towards reconfigurable architectural enclosure. Despite their individual differences, these experiments identify a trajectory for new possibilities for elastic architectural components that are more appropriate for ‘soft’ responsive architecture. We argue that this approach can provide an early hypothesis for design responsive architecture with a mix of passive and active design strategies.
keywords	Elastic; transformable; soft; responsive
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2016_271
id	caadria2016_271
authors	Khoo, Chin Koi and Flora Salim
year	2016
title	Painterface: An integrated responsive architectural interface
doi	https://doi.org/10.52842/conf.caadria.2016.271
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 271-280
summary	Interface design is one of the main research areas in human- computer interaction (HCI). In computer science, many HCI research- ers and designers explore novel interface designs with cutting-edge technology, but few investigate alternative interfaces for existing built environments, especially in the area of architecture. In this paper, we investigate alternative interface designs for existing architectural ele- ments—such as walls, floors, and ceilings—that can be created with off-the-shelf materials. Instead of merely serving as discrete sensing and display devices integrated to an existing building’s surface, these liquid and thin materials act as interventions that can be ‘painted’ on a surface, transforming it into an architectural interface. This interface, Painterface, is a responsive material intervention that serves as an an- alogue, wall-type media interface that senses and responds to people’s actions. Painterface is equipped with three sensing and responsive ca- pacities: touch, sound, and light. While the interface’s touch capacity performs tactile sensing, its sound-production and illumination capaci- ties emit notes and light respectively. The outcomes of this research suggest the possibility of a simple, inexpensive, replaceable, and even disposable interface that could serve as an architectural intervention applicable to existing building surfaces.
keywords	Human-computer interaction; integrated interface; sensing and responsive architectural interface
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2018_125
id	ecaade2018_125
authors	Khoo, Chin Koi and Shin, Jae-Won
year	2018
title	Designing with Biomaterials for Responsive Architecture - A soft responsive "bio-structural" hydrogel skin
doi	https://doi.org/10.52842/conf.ecaade.2018.2.285
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 285-292
summary	Synthetic biomaterials are not only widely explored in tissue engineering, but also present important opportunities in responsive architecture, especially soft structures and skins. In this paper we present how water-containing hydrogels can be adapted to digital fabrication techniques to design a soft responsive skin with integrated skeleton and surface. This research project details preliminary investigation into how tough hydrogels with different material properties can be designed and incorporated into laser-cutting and 3D printing methods typically used in architectural design. The outcome of this research produces an early prototype of thermally sensitive, tough hydrogel skin that responds to environmental stimuli such as temperature and moisture. Our work provides initial insights into how a soft responsive "bio-structural" architectural skin can be designed by integrating actuation, structure, and skins.
keywords	Biomaterials; digital fabriication; hydrogel; responsive architecture
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2019_225
id	caadria2019_225
authors	Khoo, Chin Koi and Wee, H. Koon
year	2019
title	PixelGreen - A hybrid green media wall for existing high-rise buildings
doi	https://doi.org/10.52842/conf.caadria.2019.2.131
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 131-140
summary	Vertical farms and gardens are not new in dense urban environments, but few examples further explore the architectural potential and possibilities of the form to apply the same design approach to existing surfaces and walls of buildings. In addition, there is a design opportunity to exploit existing wall surfaces as 'analogue' media screens by using the vertical farm and garden as a medium of representation. In this paper we explore the opportunity for new design possibilities to achieve a hybrid architectural wall system as a reciprocal retrofit for existing building surfaces, integrating a vertical micro-farm and media screen. This architectural opportunity is explored through agile methods and the early design stages of a hybrid green media wall, PixelGreen. PixelGreen will be retrofitted to an existing wall of a high-rise building to convey mediated, graphical, artistic content and provide edible plant micro-farming simultaneously. The physical proof of concept is given through a modular mock-up with a programmed UAV (unmanned aerial vehicle) serving as the 'agent' for constant updating of mediated content, maintenance and a regular farming cycle. The outcome of this approach provides preliminary insight into how to feasibly implement a hybrid green media wall with autonomous robotics and computation technology.
keywords	Green wall; media facade; vertical farm; architectural intervention
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2018_025
id	caadria2018_025
authors	Khoo, Chin Koi, Wang, Rui, Globa, Anastasia and Moloney, Jules
year	2018
title	Prototyping a Human-Building Interface with Multiple Mobile Robots
doi	https://doi.org/10.52842/conf.caadria.2018.1.525
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 525-534
summary	Recent advances in miniature mobile robotic research have generated possibilities and potentials in a range of fields such as the military, rescue operations, logistics and education. Within architecture, especially in responsive architecture and architectural interface disciplines, there has been minimal uptake of this technology, and so its full potential and implications have not been fully explored. In this paper, we propose a design exploration of a human-building interface (HBI) with multiple mobile robots serving as 'physical pixels', which investigates the latent possibilities of public interactive displays and media screens, potentially provoking interaction with existing built environments. The outcomes of this paper include an early-stage design study of an HBI prototype, PixelFace, which has been developed with multiple spherical mobile robots and an existing building structure. An early physical implementation of the HBI as an interactive public display with real-time physical movement that encourages playful interaction is also included.
keywords	Human-Computer Interaction; Human-Building Interface; Mobile Robots; Responsive Architecture
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2014_037
id	caadria2014_037
authors	Khoo, Chin Koi
year	2014
title	Designing a Responsive Material System with Physical Computing
doi	https://doi.org/10.52842/conf.caadria.2014.097
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 97–106
summary	This paper focuses on an investigation to explore architectural design potentials with a responsive material system and physical computing. Contemporary architects and designers are seeking to integrate physical computing in responsive architectural designs; however, they have largely borrowed from engineering technology’s mechanical devices and components. There is the opportunity to investigate an unexplored design approach to exploit the responsive capacity of material properties as alternatives to the current focus on mechanical components and discrete sensing devices. This opportunity creates a different design paradigm for responsive architecture that investigates the potential to integrate physical computing with responsive materials as one integrated material system. Instead of adopting highly intricate and expensive materials, this approach is explored through accessible and off-the-shelf materials to form a responsive material system, called Lumina. Lumina is implemented as an architectural installation called Cloud that serves as a morphing architectural skin. Cloud is a proof of concept to embody a responsive material system with physical computing to create a reciprocal and luminous architectural intervention for a selected dark corridor. It represents a different design paradigm for responsive architecture through alternative exploitation of contemporary materials and parametric design tools.
keywords	Physical computing; responsive material systems; adaptive architecture
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	acadia11_334
id	acadia11_334
authors	Khoo, Chin Koi; Burry, Jane; Burry, Mark
year	2011
title	Soft Responsive Kinetic System: An Elastic Transformable Architectural Skin for Climatic and Visual Control
doi	https://doi.org/10.52842/conf.acadia.2011.334
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 334-341
summary	Most designers of dynamic building skins that reconfigure themselves in changing conditions have utilised mechanical systems. However, when designing for dynamic responsiveness, these systems often involve intricate and high-tech mechanistic joints, actuators and control. This research investigates the possibility of the ‘soft’ form-changing material systems to minimise the use of ‘hard’ mechanical components for kinetic responsive architectural skins. The research goal is to develop a prototype system that can be used to retrofit an existing building with an application of a ‘second skin’ that performs well in various climate conditions and is visually compelling. This approach is tested by the prototype, namely “Curtain”. It serves two fundamental purposes: Comfort and Cosmetic, to improve the existing interior and exterior spatial conditions. As an early proposition, the significance of this research offers a practical method for realising a ‘soft’ transformable architectural skin that synthesises passive cooling, manipulates sunlight and is set as an active shading device. Parametric design is used to explore and simulate these climatic and visual design constraints.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	acadia13_243
id	acadia13_243
authors	Khoo, Chin Koi; Salim, Flora
year	2013
title	Responsive Materiality for Morphing Architectural Skins
doi	https://doi.org/10.52842/conf.acadia.2013.243
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 243-252
summary	This paper presents the design of a novel material system with sensing, form-changing and luminous capacities for responsive and kinetic architecture. This aim is explored and evaluated through an experimental design investigation in the form of an architectural skin. Through experimentation with alternative materials and a rigorous process of designing the responsive material systems,a new architectural skin, namely Blanket, emerged from this research. The newly developed responsive material system is an amalgamation of silicone rubbers and glowing pigments, molded and fabricated in a prescribed way—embedded with shape memory alloys on a tensegrity skeletal structure to achieve the desired morphing properties and absorb solar energy to glow in the dark.Thus, the design investigation explores the potential of the use of form-changing materials with capacitance sensing, energy absorbing and illumination capabilities for a morphing architectural skin that is capable of responding to proximity and lighting stimuli. This lightweight, flexible and elastic architectural morphing skin is designed to minimize the use of discrete mechanical components. It moves towards an integrated “synthetic” morphing architecture that can sense and respond to environmental and occupancy conditions.
keywords	next generation technology; responsive material system; morphing architectural skin; kinetic structure; physical computing in architectural design; sensing and luminous material
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:52

_id	ijac20119405
id	ijac20119405
authors	Koi Khoo, Chin; Flora Salim and Jane Burry
year	2011
title	Designing Architectural Morphing Skins with Elastic Modular Systems
source	International Journal of Architectural Computing vol. 9 - no. 4, 379-419
summary	This paper discusses the issues of designing architectural skins that can be physically morphed to adapt to changing needs.To achieve this architectural vision, designers have focused on developing mechanical joints, components, and systems for actuation and kinetic transformation. However, the unexplored approach of using lightweight elastic form-changing materials provides an opportunity for designing responsive architectural skins and skeletons with fewer mechanical operations. This research aims to develop elastic modular systems that can be applied as a second skin or brise-soleil to existing buildings.The use of the second skin has the potential to allow existing buildings to perform better in various climatic conditions and to provide a visually compelling skin.This approach is evaluated through three design experiments with prototypes, namely Tent, Curtain and Blind, to serve two fundamental purposes: Comfort and Communication.These experimental prototypes explore the use of digital and physical computation embedded in form-changing materials to design architectural morphing skins that manipulate sunlight and act as responsive shading devices.
series	journal
last changed	2019/07/30 10:55

_id	caadria2012_045
id	caadria2012_045
authors	Khoo, C. K. and F. D. Salim
year	2012
title	A responsive morphing media skin
doi	https://doi.org/10.52842/conf.caadria.2012.517
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 517–526
summary	Existing media façades do not function as fenestration devices. They have been used mainly for visual communication and aesthetic purposes. This paper introduces a responsive morphing skin that can act as an active fenestration device as well as a media skin. We investigate new possibilities of using form-changing materials in designing responsive morphing skins that respond to environmental conditions and act as a communicative display. The design experiment that embodied this investigation, namely Blind, serves as a new layer of analogue media brise-soleil for existing space. It communicates the relationships between interior and exterior spaces visually and projects mutable imageries to the surrounding environment through sunlight. The design process of Blind simulates the responsive behaviour of the intended architectural skin by integrating physical computing and parametric design tools. This process includes the integration of soft apertures and architectural morphing skin to introduce a novel design method that enables an architectural skin to be a means of communication and fenestration. It responds to changing stimuli and intends to improve the spatial quality of existing environments through two types of transformations: morphological and patterned.
keywords	Media façades; elasticity; responsive architecture; formchanging materials; kinetic skin
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ijac201210203
id	ijac201210203
authors	Abdelhameed, Wael A.
year	2012
title	Micro-Simulation Function to Display Textual Data in Virtual Reality
source	International Journal of Architectural Computing vol. 10 - no. 2, 205-218
summary	Virtual reality creates an effective communication platform with a high degree of perception and exploration, increasing the benefits of VR applied functions.This research paper reports a virtual reality function of using the micro-simulation editor-player with XML file in the virtual reality environment.The details of the function are presented.The function aiming at combining visual and textual data in VR model visualisation, was developed by the researcher, and was included in the micro-simulation plug-in of a virtual reality program,VR Studio version 6, previously known as UC-Win/Road, by the program developers.The research paper discusses the computer simulation techniques and uses in virtual reality in general.The research paper proceeds to introduce a case study of construction process visualization in the virtual reality environment, in which the newly developed function is utilized to simultaneously visualise data reports related to the stages of VR model visualisation.The concluding remarks accentuate this micro-simulation function with its potential uses in different fields.
keywords	Micro-Simulation, XML,Virtual Reality, Construction Process Visualisation
series	journal
last changed	2019/05/24 09:55

_id	ascaad2012_009
id	ascaad2012_009
authors	Abdelmohsen, Sherif
year	2012
title	Genres of Communication Interfaces in BIM-Enabled Architectural Practice
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 81-91
summary	This paper explores the interaction and different types of representations enacted in a BIM-enabled environment that involves interdisciplinary and intradisciplinary collaboration among teams of designers in an architectural praxis context. By means of an ethnographic study conducted over the course of an architectural project from schematic design to construction documents, including five disciplines and twenty subjects, genres of communication interfaces are identified between BIM-authoring tools, sketching interfaces and domain specific analysis tools, and explored within the realm of distributed cognition. Implications in architectural practice and education are then discussed.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_009.pdf
last changed	2012/05/15 20:46

_id	ascaad2012_007
id	ascaad2012_007
authors	Abdelsalam, Mai M.
year	2012
title	The Use of Smart Geometry in Islamic Patterns - Case Study: Mamluk Mosques
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 49-68
summary	It is noted that architects need new and quick methods designing the historic architectural styles, as well as restoring the historical urban areas particularly the Islamic ones. These designs and restorations should adapt to the basics of the Islamic style used; general concept, module and features. Smart Geometry provides advanced design concepts and increases alternative variations. Parametric design softwares also add more rules and relations on the design process. Obviously, the Islamic module and proportions are used as design generators that result in extracting a number of alternatives easily in a little time. Generative Components (GC) is the parametric software used to achieve the desired objectives of this research.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_007.pdf
last changed	2012/05/15 20:46

_id	ascaad2012_024
id	ascaad2012_024
authors	Abeer, Samy Yousef Mohamed
year	2012
title	Sustainable Design and Construction: New Approaches Towards Sustainable Manufacturing
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 241-251
summary	Ecological and environmental issues are playing an important and larger role in corporate and manufacturing strategies. For complete creative design process, buildings require both for construction and manufacturing, due to their comparatively long life cycle for maintenance, significant raw material and energy resources. Thinking in terms of product life cycles is one of the challenges facing manufacturers today. “Life Cycle Management” (LCM) considers the product life cycle as a whole and optimizes the interaction of product design, construction, manufacturing and life cycle activities. The goal of this approach is to protect resources and maximize the effectiveness during usage by means of Life Cycle Assessment, Product Data Management, Technical Support and last but not least by Life Cycle Costing. In this paper the environmental consciousness issues pertaining to design, construction, manufacturing and operations management are presented through computer intelligent technologies of this 21century. So, this paper shows the existing approaches of LCM and discusses their visions and further development.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_024.pdf
last changed	2012/05/15 20:46

_id	ecaade2012_002
id	ecaade2012_002
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Physical Digitality
doi	https://doi.org/10.52842/conf.ecaade.2012.2
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 2 [ISBN 978-9-4912070-3-7], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 714 p.
summary	Physical Digitality is the second volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Digital Physicality. Together, both volumes contain 154 papers that were submitted to this conference. Digitality is the condition of living in a world where ubiquitous information and communication technology is embedded in the physical world. Although it is possible to point out what is “digital” and what is “real,” the distinction has become pointless, and it has no more explanatory power for our environment, buildings, and behaviour. Material objects are invested with communication possibilities, teams are communicating even when not together, and buildings can sense and respond to the environment, each other, and to inhabitants. Digital is no longer an add-on, extra, or separate software. Reality is partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also infl uences the process, methods, and what or how we teach. The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Physical Digitality have their orientation mainly in the physical realm, and reach towards the digital part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2012_000
id	ecaade2012_000
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Digital Physicality
doi	https://doi.org/10.52842/conf.ecaade.2012.1
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 1 [ISBN 978-9-4912070-2-0], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 762 p.
summary	Digital Physicality is the first volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Physical Digitality. Together, both volumes contain 154 papers that were submitted to this conference.Physicality means that digital models increasingly incorporate information and knowledge of the world. This extends beyond material and component databases of building materials, but involves time, construction knowledge, material properties, space logic, people behaviour, and so on. Digital models therefore, are as much about our understanding of the world as they are about design support. Physical is no longer the opposite part of digital models. Models and reality are partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also influences the process, methods, and what or how we teach.The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Digital Physicality have their orientation mainly in the digital realm, and reach towards the physical part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2012_212
id	ecaade2012_212
authors	Aghaei Meibodi, Mania ; Aghaiemeybodi, Hamia
year	2012
title	The Synergy Between Structure and Ornament: A Reflection on the Practice of Tectonic in the Digital and Physical Worlds
doi	https://doi.org/10.52842/conf.ecaade.2012.2.245
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 245-254
summary	The use of digital design and fabrication technologies in architecture has followed a paradigm shift, which has seen the topology, form and structure of architecture pushed to incorporate areas such as climate, construction, acoustic etc. While these digital technologies are intended to enhance the processes and performance, a discussion of aesthetics has been ignored. Surmising that the use of digital technology enhances the performability and effi ciency aspects of architecture as well as the aesthetics, this research questions what the new relationships and arrangements for structure and ornament are. What are the challenges when structure uses a process-based logic and is sensitive to materiality whereas the aesthetics has a representation-based logic and is not sensitive to materiality? The authors of this paper contribute to this debate by using the notion of tectonic as a platform for gaining and creating knowledge about this issue and examining the issues through the design and prototyping of a Multi-functional Pavilion.
wos	WOS:000330320600024
keywords	Processes; ornament; digital technology; tectonic; architectural expression
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

For more results click below: