Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 15801

Reformat results as: short short into frame detailed detailed into frame

_id	a537
authors	Bijl, Aart
year	1987
title	Strategies for CAD
source	Eurographics '87. 1987. (16) p. : ill. includes bibliography
summary	Assumptions for CAD are discussed, pointing to a distinction between human knowledge and machine representations of knowledge. Implications for future useful CAD systems are considered. A strategy for 'mechanistic' symbol processors is presented, employing 'mechanisms' of formal logic to manipulate written and drawn expressions of designers' knowledge
keywords	CAD, representation, knowledge, engineering, data structures, intelligence, logic, semantic networks, symbols, drawings, design
series	CADline
last changed	1999/02/12 15:07

_id	6bfa
authors	Bijl, Aart
year	1989
title	Evaluation and Representation
source	December, 1989. 11 p. : ill. includes bibliography
summary	In this paper the author will consider four key concepts: design, evaluation, models, and representation. In combination, definitions of these concepts impinge on each other and they are further conditioned by the author intention to represent design knowledge within computers. The issue of human-computer interaction then becomes critical to the usefulness of knowledge representations for designers
keywords	CAD, representation, design, evaluation
series	CADline
last changed	1999/02/12 15:07

_id	cf2005_1_36_100
id	cf2005_1_36_100
authors	BILDA Zafer and GERO John S.
year	2005
title	Do We Need CAD during Conceptual Design?
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 155-164
summary	This paper presents the results of experiments to test whether a designer necessarily needs to produce and utilize external representations in the very early phases of conceptual design. Three architects are engaged in two separate design processes, one is the experiment condition where they were not allowed sketch, and the other, the control condition where they were allowed to sketch. In the experiment condition, architects were required to put on a blindfold and think aloud while designing. The results show that in both conditions the design outcomes fit in the given dimensions of the site, accommodate the space requirements and allow an effective use for the clients. Thus, when the participants were blindfolded, they were able to produce designs by using their cognitive resources to create and hold an internal representation of the design rather than by sketching, or using a CAD tool. We finally raise the question: do architects need CAD representations during the conceptual phase of the design activity?
keywords	representations, protocol studies, conceptual design
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	1cf0
id	1cf0
authors	Bilda, Z and Gero, JS
year	2008
title	Idea development can occur using imagery only during early conceptual designing
source	in JS Gero and AK Goel (eds), Design Computing and Cognition'08, Springer: 303-320.
summary	This paper shows that expert architects can effectively develop ideas without sketching during early conceptual designing. We analysed design protocols of six expert architects working on two different design problems under two different conditions, one in which they were blindfolded and one in which they were sketching. Architects developed design ideas efficiently when they were blindfolded, as opposed to the common view that they would better develop ideas with sketching.
keywords	imagery, blindfolded designing, protocol study
series	other
type	normal paper
email
last changed	2009/09/11 18:31

_id	2cb4
authors	Bille, Pia
year	1992
title	CAD at the AAA
doi	https://doi.org/10.52842/conf.ecaade.1992.279
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 279-288
summary	Teaching computer science at the Aarhus School of Architecture goes back as far as to the beginning of the 80’s, when a few teachers and students were curious towards the new media seeing its great developing perspectives and its possible use in the design of architecture. The curiosity and excitement about technology continued, although the results were modest and the usefulness not a dominant aspect in this early period. In the middle of the 80’s the School of Architecture was given the opportunity by means of state funding to buy the first 10 IBM PC's to run AutoCad among other programmes. Beside this a bigger CAD-system Gable 4D Series was introduced running on MicroVax Workstations. The software was dedicated to drafting buildings in 2 and 3 dimensions - an important task within the profession of architects.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ee23
authors	Bille, Pia
year	1994
title	A Study of Color
doi	https://doi.org/10.52842/conf.ecaade.1994.185
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 185-190
summary	Color courses are traditionally based on exercises carried out with either water color or colored paper. Use of the computer as a tool for teaching color theory and analyzing color in architecture was the topic of a course given at the School of Architecture and Planning at the State University of New York at Buffalo, USA where I was an exchange faculty in the academic year 1993/94. The course was structured into 3 topics: color theory, color perception and application of color.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	f288
authors	Bille, Pia
year	1999
title	Integrating GIS and Electronic Networks In Urban Design and Planning
doi	https://doi.org/10.52842/conf.ecaade.1999.722
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 722-728
summary	In 1998 I undertook an inquiry into the use of information technology in Urban Design and Planning in Danish municipalities and among planning consultants. The aim was to find out who was working with the IT and for what purposes it was used. In education there seems to be barriers to a full integration of the new media, and I wanted to find out if that was also the case in the practise of architects and planners. Surprisingly I discovered that there was a computer on almost every desk, - but there were big differences in the use of the technology. The investigation described here is based on interviews with planners in selected municipalities and with urban planning consultants, and the results have been summarised in a publication.
keywords	Urban Planning, Electronic Collaboration, GIS, Data Bases
series	eCAADe
email
last changed	2022/06/07 07:54

_id	e10e
authors	Billon, R. and Rocca, R.
year	1983
title	Comprendre KEOPS: Logiciel de conception assistee par ordinateur en architecture
doi	https://doi.org/10.52842/conf.ecaade.1983.x.s9f
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. III.19-III.35
summary	En informatique graphique, la méthode la plus courante pour saisir un bâtiment consiste à dêcrire et à stocker en base de données les "pleins": les murs, planchers, composants. Cette procédure est vite fastidieuse, et ne permet pas réellement une véritable conception assistée par ordinateur. KEOPS expérimente une autre méthode qui consiste à décrire l'esquisse par ses "vides", c'est-à-dire les volumes des locaux en trois dimensions. Le logiciel opère automatiquement la transformation "filaire" en composants et ouvrages du bâtiment en exploitant un savoir technologique. Le benéfice? La réduction spectaculaire du temps de saisie et un logiciel de C.A.O. enfin opérationnel en bâtiment.
series	eCAADe
more	http://www.marseille.archi.fr
last changed	2022/06/07 07:50

_id	ascaad2007_016
id	ascaad2007_016
authors	Biloria, N.
year	2007
title	Developing an Interactive Architectural Meta-System for Contemporary Corporate Environments: An investigation into aspects of creating responsive spatial systems for corporate offices incorporating rule based computation techniques
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 199-212
summary	The research paper exemplifies upon an attempt to create a co-evolving (socio-cultural and technological) programmable spatiality with a strong underpinning in the domain of computation, interaction design and open system typologies for the generation of a constantly informed self-adaptive corporate office space (which addresses the behavioral patterns/preferences of its occupants). Architectural substantiations for such corporate bodies embodying dynamic business eco-systems usually tend to be rather inert in essence and deem to remain closed systemic entities, adhering to a rather static spatial program in accordance with which they were initially conceptualized. The research initiative, rather than creating conventional inert structural shells (hard components), thus focuses upon the development of a meta-system, or in other words the creation of a ‘soft’ computationally enriched open systemic framework (informational) which interfaces with the ‘hard’, material component and the users of the architectural construct (corporate offices). This soft space/meta system serves as a platform for providing the users with a democratic framework, within which they can manifest their own programmatic (activity oriented) combinations in order to create self designed spatial alternatives. The otherwise static/inert hard architectural counterpart, enhanced with contemporary technology thus becomes a physical interface prone to real-time spatial/structural and ambient augmentation to optimally serve its users.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ecaade2013_023
id	ecaade2013_023
authors	Biloria, Nimish and Chang, Jia-Rey
year	2013
title	Hyper-Morphology
doi	https://doi.org/10.52842/conf.ecaade.2013.1.529
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 529-537
summary	Hyper-Morphology is an on-going research outlining a bottom-up evolutionary design process based on autonomous cellular building components. The research interfaces critical operational traits of the natural world (Evolutionary Development Biology, Embryology and Cellular Differentiation) with Evolutionary Computational techniques driven design methodologies. In the Hyper-Morphology research, genetic sequences are considered as sets of locally coded relational associations between multiple factors such as the amount of components, material based constraints, and geometric adaptation/degrees of freedom based adaptation abilities etc, which are embedded autonomously within each HyperCell component. Collective intelligence driven decision-making processes are intrinsic to the Hyper-Morphology logic for intelligently operating with autonomous componential systems (akin to swarm systems). This subsequently results in user and activity centric global morphology generation in real-time. Practically, the Hyper-Morphology research focuses on a 24/7 economy loop wherein real-time adaptive spatial usage interfaces with contemporary culture of flexible living within spatial constraints in a rapidly urbanizing world.
wos	WOS:000340635300055
keywords	Evo-devo; cellular differentiation; self-organization; evolutionary computation; adaptive architecture.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia08_152
id	acadia08_152
authors	Biloria, Nimish
year	2008
title	Morphogenomic Urban and Architectural Systems: An Investigation into Informatics Oriented Evolution of Form: The Case of the A2 Highway
doi	https://doi.org/10.52842/conf.acadia.2008.152
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 152-157
summary	This research paper exemplifies upon a novel information integrated generative design method: Morphogenomics, being experimented with at Hyperbody, TU Delft. Morphogenomics, a relatively new research area, which deals with the intricacies of morphological informatics. This paper furthermore discusses an ongoing Morphogenmoics oriented design-research case: the development of a Distributed Network-city along the A2 highway, Netherlands. The A2 highway, development is a live project seeking urban development on either side of this busy highway. Hyperbody, during the course of this research initiative developed a series of real-time interactive computational tools focusing upon the collaborative contextual generation of a performative urban and architectural morphology for the A2 highway. This research paper elaborates upon these computational techniques based Morphogenomic approach and its resultant outcomes.
keywords	Computation; Evolution; Flocking; Information; Morphogenesis
series	ACADIA
last changed	2022/06/07 07:54

_id	ijac20097408
id	ijac20097408
authors	Biloria, Nimish; Valentina Sumini
year	2009
title	Performative Building Skin Systems: A Morphogenomic Approach Towards Developing Real-Time Adaptive Building Skin Systems
source	International Journal of Architectural Computing vol. 7 - no. 4, 643-676
summary	Morphogenomics, a relatively new research area, involves understanding the role played by information regulation in the emergence of diverse natural and artificially generated morphologies. Performative building skin systems as a bottom-up parametric formation of context aware interdependent, ubiquitously communicating components leading to the development of continually performative systems is one of the multi-scalar derivations of the aforementioned Morphogenomic understanding. The agenda of adaptations for these building skins specifically corresponds to three domains of adaptation: structural, behavioral and physiological adaptations resulting in kinetic adaptability, energy generation, conservation, transport and usage principles as well as material property based changes per component. The developed skins adapt in real time via operating upon ubiquitous communication and data-regulation protocols for sensing and processing contextual information. Computational processes and information technology based tools and techniques such as parametric design, real-time simulation using game design software, environmental information mapping, sensing and actuating systems coupled with inbuilt control systems as well as manufacturing physical models in collaboration with praxis form a vital part of these skin systems. These experiments and analysis based on developing intrinsic inter-dependencies between contextual data, structure and material logistics thus lay the foundation for a new era of continually performing, self powering, real-time adaptive intelligent building skin systems.
series	journal
last changed	2010/09/06 08:02

_id	acadia23_v2_118
id	acadia23_v2_118
authors	Bindlish, Stuti; M. Marji, Zaid; Aghaei Meibodi, Mania
year	2023
title	Cavity Shell: Sequential Cast-in-Place Method to Create Compression-Only Structures with Ultra-Thin Additively Manufactured Formwork Assemblies
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 2: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-0-3]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 118-128.
summary	A compression-only structure's impressive strength-to-weight ratio allows it to span large spaces using significantly less material. However, prefabricated masonry or concrete components used to construct compression-only structures are prone to damage during handling and transportation, and contribute to CO2 emissions. Additionally, assembling these components requires heavy falsework, which results in material wastage and increased construction costs. This research paper presents an alternative approach to constructing compression-only structures by introducing a new, in-situ construction approach based on coupling 3D-printed, ultra-lightweight plastic formwork and sequential casting of the formwork in compression on site. This is achieved through developing: 1) a new construction method based on the assembly of lightweight, 3D printed plastic form- work in compression-only form, which is then sequentially cast with concrete in place; 2) an integrative formwork system informed by structural and casting logics (i.e., flowability, the height of the casting point in relation to hydrostatic pressure, placement of formwork interface in alignment to internal forces in the structure; and 3) a parametric model for translating force-form diagram to integrative formwork. To verify this research method, Cavity Shell, a 1:1 scale compression-only table leg structure, measuring 1.4 meters in radius and 0.8 meters in height, was designed and built (Figure 1). This ultra-lightweight formwork took less than 48 hours to assemble, and was sequentially cast by two people. This research demonstrates the potential to rethink the construction of compression-only structures by minimizing the material used, and improving economic and environmental efficiency in their construction life cycle.
series	ACADIA
type	paper
email
last changed	2024/12/20 09:12

_id	ecaade2016_188
id	ecaade2016_188
authors	Bingöl, Cemal Koray and Çolako?lu, Birgül
year	2016
title	Agent-Based Urban Growth Simulation - A Case Study on Istanbul
doi	https://doi.org/10.52842/conf.ecaade.2016.2.041
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 41-48
summary	This study aims to create a simulation model for urban growth with agent-based modeling. The model is based on the theoretical research of Michael Batty on urban growth simulations. The study explains how the theoretical approach applied in the model with the parameters. The model in this study is created in an open-source API called 'Processing' and the simulations executed through the parameters in the study. The results of the simulation are compared with each other to find optimal parameters fits in the theoretical approach. Parameters are tested on an existing urban settlement map, which Is Istanbul. The results of Istanbul simulation are compared with existing density and urban sprawl maps of Istanbul and discussed for further studies.
wos	WOS:000402064400003
keywords	agent-based design; urban growth; urban simulation
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2014_217
id	ecaade2014_217
authors	Birgul Colakoglu
year	2014
title	New Approaches in Architecture Education - Conclusion
doi	https://doi.org/10.52842/conf.ecaade.2014.1.305
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 305-312
summary	The explosion of computationally-oriented content into architectural design and making has generated curricular changes in architectural education. This paper describes an educational model developed following this changes. One of the important goals of the educational model explained in this paper is to introduce the knowledge of geometric assembly/disassembly planning to the field of architecture encouraging students of architecture to integrate this knowledge into the design process.
wos	WOS:000361384700030
keywords	Computational design, ; design for disassembly
series	eCAADe
email
last changed	2022/06/07 07:54

_id	c9e4
authors	Birmingham, William P. and Siewiorek, Daniel P.
year	1988
title	Automated knowledge Acquisition for a Computer Hardware Synthesis System
source	19 p. : ill. Engineering Design Research Center, CMU, June, 1988. EDRC 18-06-88. includes bibliography
summary	The MICON Synthesizer Version 1 (M1) is a rule-based system which produces a complete small computer design from a set of abstract specifications. The ability of M1 to produce designs depends on the encoding of large amounts of domain knowledge. An automated knowledge acquisition tool, CGEN, works symbiotically with M1 by gathering the knowledge required by M1. CGEN acquires knowledge about how to build and when to use various computer structures. This paper overviews the operation of CGEN by providing an example of the types of knowledge acquired and the mechanisms employed. A novel knowledge-intensive generalization scheme is presented. Generalization is a pragmatic necessity for knowledge acquisition in this domain. A series of experiments to test CGEN's capabilities are explained. A description of the architecture and knowledge-base of M1 is also provided
keywords	electrical engineering, automation, knowledge acquisition, knowledge base, systems
series	CADline
last changed	2003/06/02 13:58

_id	e19d
authors	Birmingham, William P. and Siewiorek, Daniel P.
year	1989
title	Capturing Designer Expertise : The CGEN System
source	18 p. : ill Pittsburgh, PA: Engineering Design Research Center, CMU, August, 1989. EDRC 18-08-89. includes bibliography.
summary	Knowledge-based systems are becoming pervasive in the computer-aided design area. For these systems to achieve satisfactory levels of performance large amounts of knowledge are necessary. However, the acquisition of knowledge is a difficult and tedious task. Automated knowledge-acquisition tools (AKAT) provide capabilities for quickly building and maintaining knowledge-bases. This paper describes the CGEN AKAT, which allows hardware designers, unfamiliar with artificial intelligence programming techniques, to deposit their expertise into a synthesis tool's knowledge-base. A set of experiments which tested CGEN's capabilities are presented. The experiments show that with CGEN hardware designers can produce high quality knowledge-bases
keywords	CAD, automation, knowledge acquisition, tools, AI, programming, knowledge base, systems, integrated circuits, hardware
series	CADline
last changed	2003/06/02 10:24

_id	8ac0
authors	Birmingham, William P., Gupta, Anurag P. and Siewiorek, Daniel P.
year	1988
title	The MICON System for Computer Design
source	11 p. : ill. Pittsburgh, PA: Engineering Design Research Center, CMU, November, 1988. EDRC 18-10-89. includes bibliography
summary	The MICON system is an integrated collection of programs which automatically synthesizes small computer systems from high level specifications. The system address multiple levels of design, from logical through physical, providing a rapid prototyping capability. Two programs form MICON's nucleus: a knowledge-based synthesis tool called M1; and, an automated knowledge acquisition tool named CGEN which is used to teach M1 how to design. Other tools in the MICON system are an integrated database and associated data management tools. The system is fully functional, having been used to generate working designs. This paper describes the architecture and operation of the MICON system
keywords	integrated circuits, electrical engineering, design, systems, automation, integration
series	CADline
last changed	2003/06/02 13:58

_id	338b
authors	Bishop, I. D.
year	1992
title	Data integration for visualization: application to decision support
source	AURSIA '92: Proceedings of the Twentieth Annual International Conference of the Australian Urban and Regional Information Systems Association Incorporated, Gold Coast, Australia, 25-27 November 1992, Australian Urban and Regional Information Systems Association Incorporated, ACT, Australia, pp. 74-80
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
last changed	2001/06/04 20:27

_id	adb0
authors	Bishop, I.
year	1994
title	The role of visual realism in communicating and understanding spatial change and process
source	Visualization in Geographical Information Systems. H. Hearnshaw and D. Unwin. Chichester, John Wiley & Sons, pp. 60-64
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
last changed	2001/06/04 20:27

For more results click below: