Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 16607

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2018_135
id	ecaade2018_135
authors	Briscoe, Danelle
year	2018
title	Living Wall - Information Workflow and Collaboration
doi	https://doi.org/10.52842/conf.ecaade.2018.1.207
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 207-212
summary	Beyond the benefits of standard documentation agreeance and project management coordination, many architects and other design professionals express concern over the limitation of Building Information Modelling (BIM) process may have on the design process, or better yet social responsibility or ecological benefit. For Living Wall facade exploration, this research suggests BIM is arguably an effective tool to support innovation in the design process, as well as promote collaboration between ecology and architecture disciplines. Ecological measures and data collection evidence further validates BIM procedural clarity and recognizes building façade exploration both technologically and environmentally.
keywords	Living Wall; BIM; data collection
series	eCAADe
email
last changed	2022/06/07 07:54

_id	9530
authors	Broadhurst, S.J., Cockerham, G., Taylor, N. and Pridmore, T.
year	1996
title	Automatic task modelling for sewer studies
source	Automation in Construction 5 (1) (1996) pp. 61-71
summary	Research into the development of robotic modules is discussed in the context of cost-effective, small bore, non-man entry (NME) sewer renovation. Following an introduction to the engineering problem or task and the respective task-associated sensing system, interest is centred upon suitably robust task kinematics and control, where predictive modelling is implemented employing the GRASP robotic simulation software package. The physical prototype and its accompanying environment are discussed and general conclusions drawn.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ecaade2023_240
id	ecaade2023_240
authors	Brodmann, Anton, Damtsas, Efstathios, Drewes, Arne, Prell, Anna, Spaeth, Benjamin and Herrmann, Michael
year	2023
title	Computational Design and 3D Printing of a Biopolymer Construction System for Freeform Applications
doi	https://doi.org/10.52842/conf.ecaade.2023.1.347
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 347–356
summary	This work presents the design and fabrication concept as well as the pedagogy approach of a student design-build project. It examines the digital design process of a double- curved segmented freeform considering the geometry, coplanarity issues and structural design. The project discovers the opportunities and limitations offered by large scale additive manufacturing of recyclable biopolymers through prototyping and physical testing. Consequently, its adaptability to other freeform architectural applications and the resulting impact and potential on productivity, quality and sustainability in the building sector are discussed.
keywords	Design and Build, Parametric Design, Generative Design, Additive Manufacturing, Direct Extrusion Printing, Biopolymer, Double-Curved Structure, Segmentation, Coplanarity
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2024_53
id	ecaade2024_53
authors	Brodmann, Anton; Damtsas, Efstathios; Schult, Christoph; Spaeth, Benjamin; Herrmann, Michael
year	2024
title	DesignBuild Project of a 3D Printed Concrete Shell with a Segmented and Stereotomic Construction Concept
doi	https://doi.org/10.52842/conf.ecaade.2024.1.105
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 1, pp. 105–114
summary	This work presents and reflects the pedagogic DesignBuild approach of a computational developed and digital fabricated project. It examines the proactive role of these projects in contributing to scientific advancement by defining future research issues for the novel construction system. The approach, based on the integration of the entire digital process into architectural education and the collaborative, autonomous work with industrial partners, is analysed and viewed in perspective. Focusing on the topic of digital fabricated overhanging concrete structures, the developed construction system consists of discrete 3d printed segments. These are assembled into doubly curved shell structures in a stereotomic manner. The learning contents and outcomes in the digital design process as well as in the digital and rework fabrication processes are examined under considerations of possibilities and limitations. Consequently, the resulting future research issues for this construction system are discussed as the main findings. Its adaptability to other architectural applications and its productivity, quality and sustainability arguments serve for the conclusive evaluation of the impact and potential on in the building sector.
keywords	Design and Build, Student Project, Parametric Design, Generative Design, Additive Manufacturing, Direct Extrusion Printing, Concrete, Double-Curved Shell Structure, Freeform Architecture, Segmentation, Stereotomy, Coplanarity
series	eCAADe
email
last changed	2024/11/17 22:05

_id	b13d
authors	Broek, J.J., Horváth, I., Smit, B. de, Lennings, A.F., Rusák, Z. and Vergeest, J.S.M.
year	2002
title	Free-form thick layer object manufacturing technology for large-sized physical models
source	Automation in Construction 11 (3) (2002) pp. 335-347
summary	Large-sized free-form objects of different materials are widely used in various industrial applications. Currently, layered rapid prototyping technologies are not suitable for the fabrication of this kind of objects, due to the necessity of a large number of layers and the limitations in size. This paper reports a novel approach of layered manufacturing that is more appropriate for the fabrication of these large objects. A method of thick-layered object manufacturing is presented, which is based on a higher order approximation of the shape and application of a flexible curved cutting tool.The method allows the production of physical prototypes, which need little or no finishing. In order to meet the designer's intend, as closely as possible, some feasible system characteristics are introduced. The process is ordered in a sequential way and provides a highly automated process. A hierarchical decomposition of the CAD geometry takes place into components, segments, layers and sectors, based on morphological analysis. This method enables the manufacturing and the re-assembly of the parts to produce the physical prototypes without affecting the requested functionality. Due to the possibility of obtaining multiple solutions in the physical model, much attention must be paid to the efficiency of the process.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	f5db
authors	Brooks, F.P.
year	1986
title	Walkthrough - A Dynamic Graphics System for Simulating Virtual Buildings
source	Proceedings 1986 Workshop on Interactive 3D Graphics. ACM: 9-22
summary	As part of our graphics research into virtual worlds, we are building a tool for an architect and his client to use for rapid prototyping of buildings by visually "walking through" them in order to refine specifications. Our first prototype simulated the new UNC Computer Science building with some 8000 polygons. BSP-tree software on the Adage Ikonas gave a colored, shaded perspective view every 3-5 seconds while the user moved a cursor in real-time over floorplans shown on the Vector-General 3300. The current (third) version uses Pixel-Planes to generate 9 updates/second, view images shown 4' x 6' by projector. Active short- and long-term research questions include speed-up, stereo, a 6-DoF interface with eye-level defaults, and an interactive model-building, model-changing system.
series	other
last changed	2003/11/21 15:16

_id	8c66
authors	Brooks, Frederick P. Jr., Ouh-Young,Ming and Batter, James J. (et al)
year	1990
title	Project GROPE - Haptic Displays for Scientific Visualization
source	SIGGRAPH '90 Conference Proceedings August, 1990. vol. 24 ; no. 4: pp. 177-185 : ill. (some col.). includes bibliography.
summary	A project to develop a haptic and display for 6-D force fields of interacting protein molecules was began in 1967. The authors approached it in four stages: a 2-D system, a 3-D system tested with a simple task, a 6-D system tested with a simple task, and a full 6-D molecular docking system, which was the initial goal. This paper summarize the entire project, the four systems, the evaluation experiments, the results, and the authors observations
keywords	user interface, computer graphics, visualization, virtual reality
series	CADline
last changed	2003/06/02 10:24

_id	8c6d
authors	Brooks, H. Gordon
year	1988
title	A New Communication Model for Architecture Using Video and 3D Computer Animated Graphics
doi	https://doi.org/10.52842/conf.acadia.1988.263
source	Computing in Design Education [ACADIA Conference Proceedings] Ann Arbor (Michigan / USA) 28-30 October 1988, pp. 263-274
summary	The University of Arkansas School of Architecture has produced a half-hour television program describing Richard Meier's Atheneum in New Harmony, Indiana. The program uses an analysis technique developed by Dr. Geoffrey Baker, RIBA. The treatment for the material is a combination of on- site video and computer generated 3D animated graphics. An instrument was developed to evaluate the video and its 3D graphics. Based on analysis of the test data several conclusions are apparent. Students believe the video to be very helpful in understanding this building. This video appears to be paced too quickly for understanding in one viewing. Repetitive viewings of the video are helpful in understanding the content. Some students are able to understand principles presented visually better than those presented verbally, but best learning happens when information is reinforced visually and verbally.
series	ACADIA
last changed	2022/06/07 07:54

_id	caadria2020_270
id	caadria2020_270
authors	Randall, Madison, Kordrostami, Tina and Makki, Mohammed
year	2020
title	The Taikoo Shing Superblock: Addressing urban stresses through sequential evolutionary simulations
doi	https://doi.org/10.52842/conf.caadria.2020.1.415
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 415-424
summary	The multiplicity of networks, connections and relationships that exist in every city - complex and varied - are inherent to the urban fabric. Variation within the built form is integral to ensure adaptability to environmental and climatic conditions imposed on cities over generations. This research aims to highlight the benefits of utilizing sequential evolutionary simulations, to arrive at a more resolved solution-set that addresses urban challenges of the Taiko Shing superblock in Hong Kong.
keywords	Hong Kong; Urban; Sequential Simulations; Evolution; Computation
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ascaad2016_034
id	ascaad2016_034
authors	Brothers, David; Augustus Wendell
year	2016
title	Design Films - Implementing video creation techniques into undergraduate design education
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 321-330
summary	NJIT has been introducing video production projects into undergraduate design classes over the last two years. Linear motion projects open paths to understanding the built and virtual environments in ways that augment traditional design pedagogy.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ga0023
id	ga0023
authors	Brotzu, PierPaolo and Maiocchi, Marco
year	2000
title	A Generative Approach to Variations in Production Processes
source	International Conference on Generative Art
summary	Many work procedures in generating various types of products (such as execution of recipes for food, work operation for leather, procedures for conservation of vegetables, factory workmanship processes, etc) are characterised by precise procedural steps. Each step can be defined, at the proper detail level, in terms of kind of operations, input conditions, output results; then, a complete procedure can be exploited as a set of partially ordered steps of such a kind of functions. The formalisation of such a steps allows to evaluate procedures devoted to the same goal, introducing metrics for comparing them in terms of originality or imitation. Furtherly, a contextual analysis of different procedures devoted to similar goals allows to verify possible variations in the procedures, introducing innovation and changes on the basis of the available examples. The changes can be automated through proper algorithms, just using techniques of learning by examples, in the respect of verifiable constraints. The results can be verified, and used again as a new enriched experienced basis to improve the innovation procedures. The paper will describe the approach for the analysis and the description, will propose an experienced metric, and will show examples of generation of new innovative methods based on the automated analysis of successful examples. All the practical examples will be expressed in cooking recipes, described, compared in terms of plagiarism with properly defined metrics, improved with automatic generation based on experience and examples, properly checked and validated.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	cabb
authors	Broughton, T., Tan, A. and Coates, P.S.
year	1997
title	The Use of Genetic Programming In Exploring 3D Design Worlds - A Report of Two Projects by Msc Students at CECA UEL
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 885-915
summary	Genetic algorithms are used to evolve rule systems for a generative process, in one case a shape grammar,which uses the "Dawkins Biomorph" paradigm of user driven choices to perform artificial selection, in the other a CA/Lindenmeyer system using the Hausdorff dimension of the resultant configuration to drive natural selection. (1) Using Genetic Programming in an interactive 3D shape grammar. A report of a generative system combining genetic programming (GP) and 3D shape grammars. The reasoning that backs up the basis for this work depends on the interpretation of design as search In this system, a 3D form is a computer program made up of functions (transformations) & terminals (building blocks). Each program evaluates into a structure. Hence, in this instance a program is synonymous with form. Building blocks of form are platonic solids (box, cylinder, etc.). A Variety of combinations of the simple affine transformations of translation, scaling, rotation together with Boolean operations of union, subtraction and intersection performed on the building blocks generate different configurations of 3D forms. Using to the methodology of genetic programming, an initial population of such programs are randomly generated,subjected to a test for fitness (the eyeball test). Individual programs that have passed the test are selected to be parents for reproducing the next generation of programs via the process of recombination. (2) Using a GA to evolve rule sets to achieve a goal configuration. The aim of these experiments was to build a framework in which a structure's form could be defined by a set of instructions encoded into its genetic make-up. This was achieved by combining a generative rule system commonly used to model biological growth with a genetic algorithm simulating the evolutionary process of selection to evolve an adaptive rule system capable of replicating any preselected 3D shape. The generative modelling technique used is a string rewriting Lindenmayer system the genes of the emergent structures are the production rules of the L-system, and the spatial representation of the structures uses the geometry of iso-spatial dense-packed spheres
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	ad6c
authors	Brown, A., Gavin, L., Berridge, P. and Knight, M.
year	2001
title	An Active World - Architectural Information Interchange via 3D Internet Environments
doi	https://doi.org/10.52842/conf.ecaade.2001.365
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 365-370
summary	The eCAADe organisation has the long term role to promote and facilitate the discussion and interchange of ideas relating to a broad range of issues in the field of CAAD education and research. The new technologies that have come together to give us the environment that we know as the Internet has offered a range of stimuli for new initiatives. A research group has been established to investigate and explore a particular aspect of this new potential with the goal of creating an eCAADe Virtual world as a vehicle for testing the associated ideas. This papers reports on the recent developments on this project.
keywords	Internet, 3D-Worlds, Virtual Meeting, ECAADe, Collaboration
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acfa
authors	Brown, A., Knight, M. and Nahab, May
year	1996
title	Computer Generated Architectural Images in Practice: what kind and when?
doi	https://doi.org/10.52842/conf.ecaade.1996.079
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 79-86
summary	The production of near-photorealistic images of buildings is becoming increasingly common. The software to produce reasonably sophisticated images being available at affordable prices and the increasing power of generally affordable computers have contributed to this trend. It is also probably the case that the run-of-the-mill architectural practice sees the competition producing this kind of image with a superficially beguiling quality and follow suit. What we ask in this paper is whether we should be more thoughtful about the kind of image used? Should the kind of image chosen to suit the stage of the design that it applies to and the nature of the human agents viewing the image? Of course, in posing the question we imply our answer, that it should. What we do in this paper is to illustrate why we feel it should and what the consequences are for the education of architects who are about to join the world of practice.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	26a2
authors	Brown, A., Zhu, M., Knight, M. and Berridge, Ph.
year	2002
title	i-architecture: the Virtual Campus eCAADe 2002 – Warsaw
doi	https://doi.org/10.52842/conf.ecaade.2002.532
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 532-537
summary	There are a great number of current web accessible city models, that take a variety of approaches to representing the 2D, 3D and associated graphical information that they embody. The work described here represents a stage in the development of an urban modeling approach that we intend will lead to cost effective and computationally efficient systems for such systems. Our aim is to contribute to the range of approaches being adopted by different research and development groups, across the world, and particularly within Europe.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	8e02
authors	Brown, A.G.P. and Coenen, F.P.
year	2000
title	Spatial reasoning: improving computational efficiency
source	Automation in Construction 9 (4) (2000) pp. 361-367
summary	When spatial data is analysed the result is often very computer intensive: even by the standards of contemporary technologies, the machine power needed is great and the processing times significant. This is particularly so in 3-D and 4-D scenarios. What we describe here is a technique, which tackles this and associated problems. The technique is founded in the idea of quad-tesseral addressing; a technique, which was originally applied to the analysis of atomic structures. It is based on ideas concerning Hierarchical clustering developed in the 1960s and 1970s to improve data access time [G.M. Morton, A computer oriented geodetic database and a new technique on file sequencing, IBM Canada, 1996.], and on atomic isohedral (same shape) tiling strategies developed in the 1970s and 1980s concerned with group theory [B. Grunbaum, G.C. Shephard, Tilings and Patterns, Freeman, New York, 1987.]. The technique was first suggested as a suitable representation for GIS in the early 1980s when the two strands were brought together and a tesseral arithmetic applied [F.C. Holdroyd, The Geometry of Tiling Hierarchies, Ars Combanitoria 16B (1983) 211–244.; S.B.M. Bell, B.M. Diaz, F.C. Holroyd, M.J.J. Jackson, Spatially referenced methods of processing raster and vector data, Image and Vision Computing 1 (4) (1983) 211–220.; Diaz, S.B.M. Bell, Spatial Data Processing Using Tesseral Methods, Natural Environment Research Council, Swindon, 1986.]. Here, we describe how that technique can equally be applied to the analysis of environmental interaction with built forms. The way in which the technique deals with the problems described is first to linearise the three-dimensional (3-D) space being investigated. Then, the reasoning applied to that space is applied within the same environment as the definition of the problem data. We show, with an illustrative example, how the technique can be applied. The problem then remains of how to visualise the results of the analysis so undertaken. We show how this has been accomplished so that the 3-D space and the results are represented in a way which facilitates rapid interpretation of the analysis, which has been carried out.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	63ea
authors	Brown, A.G.P., Berridge, P. and Mackie, D.
year	1997
title	Gaming as a Vehicle for Collaborative Designcollaborative design
doi	https://doi.org/10.52842/conf.ecaade.1997.x.c5x
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	This paper outlines one approach to addressing the problem of participation in a properly understood process and goes on to show how the principles used are being reinforced by an interactive computer based application.
keywords	Collaborative Design
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/berridge/berridge.htm
last changed	2022/06/07 07:50

_id	c211
authors	Brown, A.G.P.
year	1986
title	A Year's Experience with CATIA and CADAM
doi	https://doi.org/10.52842/conf.ecaade.1986.007
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 7-16
summary	In June 1985 Liverpool University obtained the CAD packages CATIA and CADAM to run on its IBM 4341 mainframe. The following is a brief description of the investigations which have taken place in the first year of their implementation to gauge the usefulness of these packages, principalLy as CAAD teaching aids. Neither CATIA nor CADAM were initially developed as architectural design aids so a matter of initial concern was their appropriateness for teaching (and possibly research) in an architectural environment.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	bc3f
authors	Brown, Andre
year	2002
title	CAAD Complements: Art and Science, Real and Virtual
doi	https://doi.org/10.52842/conf.ecaade.2002.214
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 214-218
summary	This is a personal reflection on the nature of CAAD, current trends and thoughts on where we appear to be heading with this (literally) most intangible of disciplines.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	0f2b
authors	Brown, Andre G.P. and Knight, Michael W.
year	2001
title	NAVRgate: Gateways to architectural virtual reality - A review and thought on future directions
doi	https://doi.org/10.52842/conf.caadria.2001.195
source	CAADRIA 2001 [Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6] Sydney 19-21 April 2001, pp. 195-198
summary	A core element in the success of a virtual environment is the ease and appropriateness of the navigation process. Navigation is a two part process which consists of a facility for enabling movement [Locomotion] and sensory input to aid the navigator in finding they way around [Cognition]. Our work has focussed on Navigation in Virtual Environments for Architecture and that work is summarised here.
series	CAADRIA
email
last changed	2022/06/07 07:54

For more results click below: