Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1211

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2013_77
id	sigradi2013_77
authors	Banda, Pablo S.; Arturo Lyon Gottlieb
year	2013
title	Agregados Inflables y Patrones Emergentes: Logro de Patrones de Orden Superior mediante Compresión Axial [Inflatable Aggregates and Emergent Patterns: Higher-Order Patterns Achievement through Axial Compression]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 239 - 243
summary	This paper presents a Generative Design exploration of a simulated Inflatable Components Aggregate (ACN) ruled by local configurations and mechanical behavior, tested in a digital environment. The Design Product is revealed through compressions and deformations evaluation, where the ACN internal interaction’s exhibits emerging global patterns.
keywords	Generative design, Form Finding, Simulation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2013_201
id	sigradi2013_201
authors	Bustamante Oleart, Carlos; Paulo K. Ogino Altamirano; Ester Higueras García
year	2013
title	Estrategia Metodológica para la Visualización Digital de Patrones Aerodinámicos Presentes en la Morfología Urbana y su Incidencia en el Uso Estancial de los Espacios Públicos [Methodological Strategy for the Visualization of Aerodynamic Patterns in the Urban Morphology and their Impact on the Use of Public Spaces ]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 108 - 111
summary	In relation to cities, wind is one of the less studied meteorological parameter. Constant vertical rate variations from meso scale to micro scale, altogether with strenght, direction, velocity of the urban canyon, makes the wind a complex subject of study. To achieve this, a methodological strategy that addresses the wind's multi dimensionality was raised. It was aplied to Punta Arenas, the southernmost city in the world, where most of the time winds come 90% from the same direction with speeds reaching 128 km/h. Wind's constant directional behavior allows the recognition of areodynamic phenomena produced, in the first instance, for the wind profiles influenced by the urban rugosity and then, at morphologycal level, the aerodynamic behavior of the layered fluids over the building bodies, generating a regular pattern between solids and fluids. The strong winds in cities with cold climate influence the use of public spaces, which, not being designed under this conditions, do not develop proper levels of thermal comfort.
keywords	Aerodynamics; Urban morphology; Public space; Information visualization
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2013_285
id	sigradi2013_285
authors	Caldera, Sebastián; Gonzalo Silva; Mauricio Loyola
year	2013
title	Uso de Herramientas Paramétricas de Optimización Evolutiva y Simulación Energética en el Diseño Basado en Performance [Using Evolutionary Optimization and Energy Simulation Tools in Performance-based Design]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 343 - 347
summary	This article describes three cases of integration of technologies of evolutionary optimization and energy simulation in performance-based design. The aim is to share the details of the process of creation, validation and use of the various techniques and tools, with an emphasis on the mistakes and successes obtained, so that experiences can be useful for non-specialist users interested in working with these methodologies.
keywords	Parametric design; Grasshopper 3D; Ecotect; GECO; Galápagos
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2013_205
id	sigradi2013_205
authors	Chiarella, Mauro; Luis Felipe González Böhme; Cristian Calvo Barentin
year	2013
title	Robots: Automatización en Diseño y Construcción para la Enseñanza de Arquitectura [Robots: Automation in Design and Manufacturing for Teaching Architecture]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 439 - 443
summary	Industrial robots controlled by parametric design software and visual programming environments are gaining popularity in the research and use of non-conventional construction processes in architecture. Process automation which can be personalized through variable components promises to become an industry standard with similar cost structures to current pre-fabrication industrial processes. In order to incorporate competencies from non-serial variable architectural modular design, an initial teaching initiative (Advanced Architectural Design Studio – USM) was developed in Latin América. The strategy employed is based on incorporating concepts and instruments of Construction & Design Automation for CAD/CAM processes with a Six Axis Robotic Arm (KUKA KR125/2).
keywords	Robotic fabrication; Parametric modeling, Teaching architecture
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	sigradi2013_177
id	sigradi2013_177
authors	Dávila Cordido, Mariolly
year	2013
title	Estudio para la Valoración y Recuperación del Patrimonio Arquitectónico Religioso Venezolano a través de Técnicas Digitales: Iglesia De San Jacinto, Caso De Estudio [Study for Assessment and Recovery of Venezuelan Religious Architectural Heritage Through Digital Techniques: Church of San Jacinto, Case Study]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 177 - 181
summary	The purpose of this paper is to implement a methodology for the recovery of religious architectural heritage of Venezuela, exemplified in a case study: the virtual reconstruction of the church of San Jacinto, located in Caracas. The methodology consists of four stages: two investigative, graphic and informative stage using QR codes. As hypothesis is proposed that, given the limited existing documentation, should supplement the study and lifting Venezuelan Canarian churches with altarpieces and, based on that, characterize and play virtually Venezuelan colonial church model.
keywords	Colonial architecture; Religious heritage; Virtual reconstruction; Visual simulation; QR
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	sigradi2013_157
id	sigradi2013_157
authors	Gómez, Diego; Mario Marchant; Loreto Ulloa ; Bárbara Echaíz; Carla Ponzano; Rocío Hurtado; Adolfo Álvarez;
year	2013
title	Mediaciones Algorítmicas para la Percepción de la Ciudad y su Apropiación Agonista [Algorithmic mediations for the perception of the city, and its agonistic appropriation ]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 479 - 483
summary	This paper presents conceptual and theoretical basis, methodological processes, and ongoing developments for the research work done within the Design and Agonism group at the Department of Design of the School of Architecture and Urbanism of the University of Chile. The research problem guiding this work has been defined as algorithmic mediations for the perception of the city, as vehicles for agonistic citizen appropriation in a hypothetic Santiago, Chile.
keywords	Adversarial design; Agonism; Mediations; Citizenship; Media arts
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	caadria2013_228
id	caadria2013_228
authors	Gün, Onur Y. and Elliot E. Greenblatt
year	2013
title	Tran[s] Quillity: The Dynamically Mediated Façade
doi	https://doi.org/10.52842/conf.caadria.2013.955
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 955-964
summary	Media façades grant infinitely many faces to a building and can change the architectural meaning of what a façade is. They can also help to transform the face of the building into an over-size communication device for public (Borras, 2010). Contemporary media façades mostly rely on the content of their screens, and only a small number of them physicality of the screen itself. Precedent building façades that incorporate moving componentsareunable to function as displays. In this paper we present a media façade design, titled“Tran[s]quillity”, in which we fuse reconfigurable building com-ponents with display technologies to achieve a unique design. As well as fulfilling the function of a regular media wall -as a crisp screen- we imagine Tran[s]quillity as a transformable kinetic sculpture that can act as a screen of physical depth to introduce greater functionality and interactivity.
wos	WOS:000351496100098
keywords	Media, Façade, Kinetic, LED, Image processing, Digital, Design, Architecture
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2013_230
id	caadria2013_230
authors	Gün, Onur Y.
year	2013
title	The Executed and the Observed in Sketches: Visual and Computational Processing for Explorative Drawings
doi	https://doi.org/10.52842/conf.caadria.2013.801
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 801-810
summary	Drawing is expressing. The mind’s eye works with the drawing to materialize ideas via transforming them into visual abstractions. The genuine supremacy of drawing emerges from its potential to evoke, not from its ability to represent. Computers are harbingers of unprecedented and enriching drawing environments. Yet they also introduce ambivalences since they suppress drafter’s bodily and perceptual engagement with drawings. This paper aims to delineate the similarities and differences between hand drawing and (via-computer) algorithmic drawing for design. The goal is to discuss the altering role of eyes and hands in long-contrasted virtual and material environments of drawing. The outlined comparisons of algorithmic and hand sketching should encourage research for blending digital and analogue modes of sketching.
wos	WOS:000351496100083
keywords	Drawing, Computation, Sketch, Algorithmic, Design, Studio, Visual, Calculation
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2013_156
id	ecaade2013_156
authors	Gün, Onur Yüce
year	2013
title	Performing Realism
doi	https://doi.org/10.52842/conf.ecaade.2013.1.061
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 61-68
summary	Realistic renderings contain a large amount of information about the spatial, geometric and material properties of prospective buildings that can directly affect design decisions, yet these images are most of the time used as after-the-fact representational visualizations. In this paper we propose a model to make the realistic images a very part of the design and decision making process. If we are to utilize realistic images during earlier decision making stages of the design processes, then we should develop experiential workflows in which we can create and interact with immersive realistic images real-time. We take several steps towards establishing an interactive rendering-animating-editing workflow that enables the designers to work with real-time rendered stereoscopic animations. In our system, we use realism to create an immersive exploration environment, as opposed to underutilizing it to represent a static moment.
wos	WOS:000340635300005
keywords	Visualization; stereoscopy; computation; interaction; immersion.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	sigradi2016_546
id	sigradi2016_546
authors	Hernández, Silvia Patricia; Boccolini, Sara Maria; Chaves, Cristina; Genero, María Angeles; Mari, Belén; Ron, Lucia
year	2016
title	Trabajo conjunto inter/transdisciplinario para una propuesta concreta que dialoga con la sociedad y su medio. Citycrowdcreating [Cross-disciplinary work for a concrete proposal that interacts with society and the environment. Citycrowdcreating]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.926-930
summary	Working in pairs is collective collaboration. The collective intelligence, crowdthinking and its variations are part of today's language. Based on this concept, we propose to fill empty spaces from the current communication of culture from Goverment of Córdoba. There is an information movement and events in conection to crowd. We propose a device, that broadcasts the contents of the hashtag: #quetenemoshoy, making it more popular, and in everyone's range. We set out a collaboration situation, with a concrete proposal, that includes dialogue with its surroundings. Articulating knowledge from different disciplines, between the goverment and the residents. Following neologism from Gutiérrez-Rubí y Freire (2013),we propose will be CITY-CROWD-CREATING.
keywords	CrowdCreating; Microarchitecture; Inclusive; Communication
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2013_271
id	sigradi2013_271
authors	Lobos, Danny; Gerth Wandersleben; Lorena Silva Castillo
year	2013
title	Mapeo de Interoperabilidad entre BIM y software de Simulación Energética para Chile [Mapping the Interoperability between BIM and Energy Simulation Software for Chile]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 378 - 382
summary	The Research focuses on possible links between (Building Information Modeling), the Building Energy Performance Requirements and BPS software (Building Performance Simulation). It is expected to establish critical paths within the interoperability processes between BIM and BPS to support architects and energy consultants to choose the most appropriated workflow for the analyzed buildings to fulfill the performance requirements given by the Chilean laws. Several study cases in interoperability and the state-of-the-art are presented and discussed. Finally a novel map of relation between these three areas is presented.
keywords	Building information modeling; Building performance simulation; Building performance standards; Architectural design, Interoperability
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2013_152
id	sigradi2013_152
authors	Martin Iglesias, Rodrigo
year	2013
title	Los Medios de Producción del Proyecto: Entre Imaginación y Representación [Project Production Media/Means: Between Imagination and Representation]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 32 - 35
summary	The present work explores the relationship between the architectural project and the representational media from a perspective that seeks to explain the role of the tool on thought and practice. Also, we understand that its interaction with the media representation is exacerbated in high architecture or formal filing due to the increasing prevalence and representational media, especially digital. Leading to the problem about how to establish a consistent and coherent theory of the project operativity taking into account the importance that representational media have on design practice, and to make clear their mutual influence.
keywords	Architectural project; Representational media; Imagination; Production means; Intersemiotic translation
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2014_290
id	sigradi2014_290
authors	Molinas, Isabel Sabina
year	2014
title	Contra la distinción: la libertad de las formas en la experiencia estética contemporánea [Against distinction: the freedom of the shapes in the contemporary esthetic experience]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 446-449
summary	In the field of Contemporary Esthetics is resumed the question of what is art and which are the readability conditions (reading). The questions relate to the displacement between representation and experimentation, beauty and esthetic experience, among others. In this context, we address the technology of poetry (Nancy (2012 [2013]) as technological exhibition that lets your experience the being of the object and become subjects. The corpus includes film and video (Kopystiansky 1996-97; Alys 2011 y Jaar 2013). The objective is to outline an analytical framework for thinking about the esthetic freedom of creation and the practical freedom of their recognition. (Wagner 2004).
keywords	Art; Technology; Esthetics; Design; Freedom
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2013_103
id	sigradi2013_103
authors	Molinas, Isabel
year	2013
title	El “Fuego inextinguible” de Harun Farocki: Dialéctica y Didáctica de las Imágenes Visuales en la Contemporaneidad [The "Inextinguishable Fire" of Harun Farocki: Dialectic and Didactics Visual Images in Contemporaneity]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 560 - 563
summary	The Farocki´s exhibition in Fundación PROA (Buenos Aires, 2013) and the publication in Argentina of his essays produced between 1980 and 2011 (the Black Box Editor, 2013), support the relevance of the german filmmaker. In his works, the sense it reads in transit, at the edges, in the dialogue between screens and languages, and in the virtuosity detail. The purpose is to make the perception less automatic to humanize the images and bring back sense to them. In the field of Didactics Proyectual - under construction-, that artistic experience intensifies the perception and reconstructs the established repertoire of situational grammars, enabling teaching and learning experiences enriched.
keywords	iovisual languages __; Rhetoric; Experience; Education; Didactics projective; Morphogenesis
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2013_29
id	sigradi2013_29
authors	Pereyra Bonifacio, Paulo; Fernando García Amen
year	2013
title	Pieles Responsivas en Arquitectura y Sistemas de Integración Info-Ambiental a través de Tecnología Arduino [Responsive Skins in Architecture and Info-Environmental Systems through Arduino Technology]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 430 - 434
summary	This paper presents a case study consisting in proposing and building a responsive skin that reacts to different environmental impulses using Arduino technology. Thus, we aim to obtain an intelligent, integrated and economic achievement, through digital manufacturing processes and low cost technologies integrated in an architectural project.
keywords	Responsive skins; Info-environmental integration; Digital manufacturing; Constructive processes
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	sigradi2013_96
id	sigradi2013_96
authors	Rodríguez Barros, Diana
year	2013
title	Prácticas Disruptivas e Intervenciones de Diseño en Estampación Digital, Imagen de Marca y Prototipado [Disruptive Practices and Design Interventions in Digital Stamping, Branding and Prototyping]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 529 - 532
summary	We present learning experiences related to Textile Design in postdigital environments, linked to disrupted practices from Design Thinking perspective, with the intention to translate it into sustainable didactic strategies. Methodologically from the workshop, we develop design and graphic’s databases from textiles and digital printing methods, different media’s applications, prototyping and identity simulation of their own business, which includes branding, communication pieces and packaging. We recognize innovative and meaningful responses from students regarding exploration, idea’s generation and prototype’s creation. As teachers, like craftsmen, we have tried to link material culture, tacit knowledge, resistances, social interaction and production methods.
keywords	Design; Digital stamping; Practices disruptive; Teaching-learning experiences; Environment post-digital
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	sigradi2013_98
id	sigradi2013_98
authors	Rodríguez Barros, Diana
year	2013
title	Prácticas Disruptivas e Intervenciones de Diseño Desde lo Lúdico y Participativo [Disruptive Practices and Design Interventions from Playful and Participation]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 533 - 538
summary	We recognize creative and innovative actions in interventions from Product’s Industrial Design, from the entire perspective of Design Thinking and interacting in post digital interconnected environments. Following this framework, we present teaching practices trying to adhere to disruptive didactic practices. Specifically, we have made redesign and design __interventions linking 3D models, graphics supports and prototyping. In this task, addressing working methods of solving the projective workshop’s own problems, we had used applications of 3D NURBs modelers and meshes, hyperrealists renders and image processing. The teaching experience results, with creative responses from student’s collaborative actions, have invited to established and solved unique problems in innovative ways. We consider to have developed a fruitful and meaningful experience.
keywords	Design; Products; Practices disruptive; Teaching-learning experiences; Environment postdigital
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	sigradi2013_380
id	sigradi2013_380
authors	Rossado Espinoza, Verónica
year	2013
title	El Diseño Arquitectónico en la Sociedad de la Información y el Conocimiento: Nuevo Paradigma en la Arquitectura [The Architectural Design of the Information Society and Knowledge: New Paradigm in Architecture ]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 551 - 554
summary	The evolution of technology and the access to information began with the new millennium. Applying the techniques of information and communications in education allows improve the teaching and learning methodology. Influenced by the information society and knowledge, architecture students might be acquiring new architectural design ability. Research on the area of architectural design education, shows that students have an advantage when they use communication and technology. Architectural design is the result of investigation and exchange of ideas, that type of design process could be called a new paradigm in architecture.
keywords	Architectural design; Architecture education; Digital architecture; Architecture paradigm; Information society
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	sigradi2014_238
id	sigradi2014_238
authors	Saez, Nicolas; Mauro Chiarella, Luciana Gronda, Rodrigo Garcia Alvarado, Luis Garcia Lara, Matias Dalla Costa, Martin Veizaga
year	2014
title	BANCAPAR. Objeto Paramétrico de Arte Público con Diseño Colaborativo y manufactura no industrializada [Parametric Object public art through collaborative design and manufacturing non-industrialized]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 527-531
summary	BANCAPAR (winner project “Regional Fondart 2013”) is a bench parametrically designed and conceived as an object of public art. It has been initiated from self-management and collaborative design in the Faculty of Engineering of the University of Bío-Bío, Concepcion, Chile. Interdisciplinary work between students and teachers from two Latin American universities, makes this a unique project of technological art in the region. Experience suggests questions at all three levels of the hermeneutic cycle: prefiguration; configuration and reconfiguration when compared to traditional ways of doing and thinking in art and design.
keywords	Parametric design; collaborative design; public art; hermeneutics
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	sigradi2013_245
id	sigradi2013_245
authors	Salinas Arriagada, Alexis
year	2013
title	Estrategia Experimental para la Visualización de Datos Urbanos: Visualización, Análisis y Evaluación de Flujos Vehiculares & Transporte Público [Experimental Strategy for Urban Data Visualization: Visualization, Analysis and Evaluation of Vehicle & Transportation Flows]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 116 - 119
summary	The distance between the data and conventional graphical representation (line graphs, pie, bar), subtraction urban context information impoverishing their reading and understanding of territory, therefore his chances of inference, which leads to the omission of information for lack of representation. The urban spatial referencing such data could accommodate a much more thorough examination of these to a deeper realization of Analysis, Diagnostics and Evaluations for the city and its transport system is, as this research focuses his gaze, looking promote the efficient functioning of this important player in the city urban. This research presents the early development of a 'Strategy for representing experimental urban data "and visualization, using a graphical editor graphics algorithmic " Grasshopper ", as well as investigate their impact and how these can glimpse useful criteria to consider in the implementation and urban design.
keywords	Urban data visualization; Experimental strategy; Streams & transportation
series	SIGRADI
email
last changed	2016/03/10 09:59

For more results click below: