Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 16686

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2019_360
id	caadria2019_360
authors	Luo, Lin and Liang, Jing
year	2019
title	Simulation Study on Heating and Cooling Energy-Saving Design of University Library Building Forms in the Severe Cold Region of China based on Honeybee and Ladybug
doi	https://doi.org/10.52842/conf.caadria.2019.1.725
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 725-735
summary	Based on the parametric simulation platform and tools, the paper studied the influence of building orientation, building size and window-to-wall ratio on heating and cooling energy consumption of the typical university library in the severe cold region of China. The study established the multiple linear regression models of form design parameters and heating and cooling energy consumption respectively, determined the weight of each parameter, proposed the optimal energy-saving orientation selection and form parameter groups. The energy-saving design strategies of the typical university library in the severe cold region were put forward from the three sub-aspects of building orientation, building size and window-to-wall ratio, and from a comprehensive point of view. The study provides effective support for energy consumption estimation in the stage of building form design, and has important practical significance for sustainable development of university buildings.
keywords	Energy-saving design; Heating and cooling energy consumption simulation; Form design parameters; University library; Severe cold region
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2023_156
id	ecaade2023_156
authors	Luo, Ruizhe, Zhang, Xingzhao, Yang, Luqiao, Yang, Ruyi, Zhang, Fazhuo, Zhang, Ding, Huang, Chenyu and Yao, Jiawei
year	2023
title	Predicting the Environmental Effects of Urban Morphology and Greenery Using Deep Generative Models
doi	https://doi.org/10.52842/conf.ecaade.2023.2.307
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 307–316
summary	The increasing urbanization process has led to greater thermal stress on pedestrians, and greenery arrangement can provide an effective mitigation strategy. However, evaluating the environmental impact of different urban morphologies and greenery arrangements using traditional methods requires time-consuming simulations. To address this challenge, we utilized a deep generative model to predict outdoor environmental indicators influenced by greenery and urban morphology. By creating a dataset of Universal Thermal Climate Index, wind speed, temperature, mean radiant temperature, and relative humidity from Envi-met simulations of three building morphologies with randomly distributed greenery arrangements, we found that Building Shadow Exposure (BSE) and Frontal Area Index, as well as BSE and Porosity, had strong interactions. Our study demonstrates that a pix2pix model trained on this dataset can accurately predict the outdoor environment in seconds (R2 > 0.80), making it a promising tool for sustainable urban planning. Thus, our research suggests that deep generative models can accelerate simulation processes and enable more comprehensive studies to support sustainable urban planning in the future.
keywords	Outdoor Environment, Urban Greenery, Urban Morphology, Deep Generative Model
series	eCAADe
email
last changed	2023/12/10 10:49

_id	caadria2020_178
id	caadria2020_178
authors	Luo, Yue, Liang, Manchen, Gao, Letong, Zhang, Yuchun, Wang, Chenxi, Su, Xia and Huang, Weixin
year	2020
title	Investigating Site Survey Process with Protocol Analysis and an Extended FBS Framework
doi	https://doi.org/10.52842/conf.caadria.2020.2.547
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 547-556
summary	In this paper, we try to investigate architectural site survey process by conducting experiment and quantitative analysis. 17 student volunteers were asked to practice site survey for a fixed design objective. With site survey process recorded along with sketching and utterance, we adopt protocol analysis and FBS ontology, which are widely used and discussed in design process research, as the basis of our analysis. Since site survey is a preliminary stage of architectural design, it differs from actual design process in many aspects. In this case, we extended the original FBS framework by adding two extra activities- Objective Processor and Subjective Processor- to better describe site survey process.
keywords	Site Survey; Protocol Analysis; FBS Ontology; Architecture Education
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	dc5a
authors	Luque, Manuel J.
year	1999
title	Working with a CAAD's Spreadsheet
doi	https://doi.org/10.52842/conf.ecaade.1999.217
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 217-222
summary	This paper shows the content of a subject imparted at the ETSAB (UPC). It describes the use of CAD systems in tasks that could not even be thought before new technology arrival and traditional methods had to be used. CAD systems potential to simultaneously work with constitutive objects and relations between them is taken into advantage. The definite design is not only the juxtaposition of some but the tight relation linking them. This work proposes CAD systems to be used in architectural design projects as spreadsheets to perform arithmetic calculations. The process to obtain an architectural model has ended in a logic sequence of formal operations, which uses completely defined objects as data. Any element of the project, data or operation, can be changed and model updating is automatically performed obtaining the new result. Finally a concrete exercise developed along the course is shown like a practical example.
keywords	Teaching, CAD, Architectural Design, Planning
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2017_305
id	ecaade2017_305
authors	Luther, Mark B.
year	2017
title	The Application of Daylighting Software for Case-study Design in Buildings
doi	https://doi.org/10.52842/conf.ecaade.2017.1.629
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 629-638
summary	The application of different software, whether simple or complex, can each play a significant role in the design and decision-making on daylighting for a building. This paper, discusses the task to be accomplished, in real case studies, and how various lighting software programs are used to achieve the desired information. The message iterated throughout the paper is one that respects, and even suggests, the use of even the simplest software, that can guide and inform design decisions in daylighting. Daylighting can be complex since the position of the sun varies throughout the day and year as well as do the sky conditions for a particular location. Just because we now have the computing capacity to model every single minute of a day throughout a year, doesn't justify its task. Several projects; an architecture studio, a university office building, a school library and a gymnasium all present different tasks to be achieved. The daylighting problems, the objects and the software application and their outcomes are presented in this paper. Over a decade of projects has led to reflecting upon the importance of computing in daylighting, its staged approach and the result that it can achieve if properly applied.
keywords	Daylighting Design; Daylighting Analysis; Radiosity; Ray-tracing
series	eCAADe
email
last changed	2022/06/07 07:51

_id	3849
authors	Luttermann, H. and Grauer, M.
year	1999
title	VRML History: Storing And Browsing Temporal 3DWorlds
source	Proceedings of the fourth symposium on the virtual reality modeling language, ACM Press, pp. 153-160
summary	Spatio-temporal data are presented and explored by VR-based visualization systems which offer 3D-navigation and time-navigation for better immersion and analysis. If the visualization results are disseminated on the WWW, they are mostly transformed into videos or, recently, into animated VRML-files which neither support 3D-navigation nor time navigation nor a time-referenced data representation. In this paper, the script language VRML History is proposed which supports the description of spatio-temporal worlds on the internet by conceptually extending VRML with a new time dimension. This is realized by a set of new nodes representing temporal geometries and time references, and a set of Java-classes extending standard VRML-browsers to perform time navigation.
series	other
last changed	2003/04/23 15:14

_id	ecaaderis2023_55
id	ecaaderis2023_55
authors	Lykouras, Ioannis, Prilenska, Viktorija, Kuusemets, Jaan, Linask, Esther and Sooväli-Sepping, Helen
year	2023
title	Reflections on Practice at RIS 2023
source	De Luca, F, Lykouras, I and Wurzer, G (eds.), Proceedings of the 9th eCAADe Regional International Symposium, TalTech, 15 - 16 June 2023, pp. 197–200
summary	The practice panel of the RIS 2023 aimed to illuminate how the knowledge generated by a community such as eCAADe is applied in the realms of architecture, planning, and policy in the Estonian context. Touching upon different aspects of practice, the presentations highlighted three main directions towards regenerative design: facilitating participatory processes, augmenting creativity by incorporating performance simulations into the early design stages and harnessing digital technologies to manage complex problems. Besides its value as a case study of the Estonian context, the practice panel can serve as an inspiration for a more complex – and messy – understanding of performance.
keywords	Practice, Regenerative Design, Performance, Participatory Processes, Digital Twin, Wicked Problems, Transdisciplinarity.
series	eCAADe
email
last changed	2024/02/05 14:28

_id	0320
authors	Lynn, G.
year	1998
title	Animate Form
source	Princeton Architectural Press, New York
summary	Animate Form is a book and interactive CD-ROM of recent architectural projects designed by Form, the office of Greg Lynn. The projects documented here explore the potential of time-based animation techniques to inform architectural design. Historically, architecture has been considered static, fixed, and inert. Through the use of state-of-the-art animation and special-effects software, Lynn transforms space and form into highly plastic, flexible, and mutable entities. He uses topological geometries to bend, twist, deform, and differentiate structure, creating unprecedented departures from preconceived notions of architecture. In experimenting with these new methods and media, Lynn has charted an innovative direction in design. The book provides a theoretical context for the experimental projects through a collection of texts by Lynn, extensively illustrated in color. The CD-ROM is an interactive hypertext environment that fully documents the design processes used to generate the projects through animations, renderings, model photographs, videos, and texts. Using a virtual 3D interface, the viewer is able to navigate through space and select objects and animations to view at different scales.
series	other
last changed	2003/04/23 15:14

_id	cf6a
authors	Lynn, G.
year	1998
title	Folds, Bodies and Blobs – Collected Essays
source	La Lettre Volee, Brussels
summary	Again we should be amazed at these wonderful algorithmic creatures that have continued to sprawl for the last half a century or more. The innovation about this type of experimentation if at all it is anymore should lie on the reality and materiality of the projects. We cannot let technology invent architecture but to at least keep up if not produce it. Lynns dialogues will only be convincing if the show doesnt end up or formulate by gyp board.
series	other
last changed	2003/04/23 15:14

_id	sigradi2009_795
id	sigradi2009_795
authors	Lyon, Arturo; Claudio Labarca
year	2009
title	Modular Flow; Hard on parametrics
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The design and fabrication of an exhibition display project was taken as an opportunity to explore parametric design with a group of students in Chile. This article presents the experience of a design studio workshop exercise by addressing the introduction of parametric design principles and the development of a built academic project through a team based design and fabrication process. The strategy followed by the team was to utilize parametric models as a mean to materialize driving variables of the project into unexpected geometries to be deployed in different public spaces in Santiago. Context, time scale and available technology resulted in a non-obvious combination of advanced digital design and fabrication techniques and low-cost mass-produced materials.
keywords	parametric; design; experimental; architecture; Chile
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2006_k003
id	sigradi2006_k003
authors	Lyon, Eduardo
year	2006
title	Design Process Taxonomy: Notes on Design Theories, Methods and Instruments
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 30-37
summary	This presentation argues that the concepts of “tools” and “material”, in relation to it use in contemporary architectural design education, can be understood as “instruments” within design processes. The difference between them relies on, its design knowledge abstraction levels, and its mechanisms to capture, manipulate and produce design knowledge. In addition, an initial exploration of Distributed Cognition concept, in order to redefine the use of instruments in design process as Cognitive Instruments, is presented. Furthermore, a more comprehensive framework for design knowledge is presented, including a specific examination of design instruments an its role indesign processes. In the conclusions possible effects derived from the use of “instruments” in design processes are explored.
series	SIGRADI
type	keynote paper
last changed	2016/03/10 09:55

_id	2005_245
id	2005_245
authors	Lyon, Eduardo
year	2005
title	Design for Manufacturing in Architecture
doi	https://doi.org/10.52842/conf.ecaade.2005.245
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 245-252
summary	This paper explores new ways to integrate manufacturing processes information in to design phases. Through the analysis of related fields and looking at the relations between its design methods and production processes, we analyze design processes and design representations that already have embedded in them specific ways to materialize through production the artifacts they define. Subsequently, we explore curved surface fabrication using cutting and bending technologies. As a summary, we conceptualize from this top-down development approach to design a framework that integrates design and construction in architecture, based on three possible applications fields: - Design processes improvement - Building production process improvement - CAD-CAM Tools development.
keywords	Design Computing, Design Cognition, Digital Manufacturing
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ijac20053304
id	ijac20053304
authors	Lyon, Eduardo
year	2005
title	Autopoiesis and Digital Design Theory: CAD Systems as Cognitive Instruments
source	International Journal of Architectural Computing vol. 3 - no. 3, 317-334
summary	In contrast to traditional models of design process fundamentally defined by the abstract manipulation of objects, this study recognizes that the resources available for rethinking architecture are to be found in a reformulation of its theory and practice. This reformation should be based on non-linear design processes in which dynamic emergence and invention take the place of a linear design process fixed on a particular object evolution. Advances in computation thinking and technology have stimulated the design and formulation of a large number of design software. Its elaboration supposes a new conceptualization of our discipline's knowledge, in a body of principles and regulations, which commands the artifact's design and its realization; therefore, it constitutes a preliminary datum for its comprehension, and thereby is of theoretical importance. Despite the continuous increment of power in computers and software capacities, the creative space of freedom defined by them acting as cognitive instruments remains almost unexplored. Therefore, we propose a change from a design knowledge based on objects to one focused on design as a network of processes. In addition, this study explores the concept of Distributed Cognition in order to redefine the use of digital tools in design process as Cognitive Instruments.
series	journal
more	http://www.ingentaconnect.com/search/expand?pub=infobike://mscp/ijac/2005/00000003/00000003/art00005
last changed	2007/03/04 07:08

_id	2006_342
id	2006_342
authors	Lyon, Eduardo
year	2006
title	Component Based Design and Digital Manufacturing - A DfM Model for Curved Surfaces Fabrication using Three Axis CNC Router
doi	https://doi.org/10.52842/conf.ecaade.2006.342
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 342-350
summary	Through the use of design for manufacturing (DfM) method and looking at the relations between its potential application in architectural production and its implementation using digital manufacturing technologies, we analyze building construction processes and explore, in more detail curved surface fabrication using two dimensional cutting and three dimensional milling processes. Afterwards a DfM model for curved surfaces fabrication using three-axis computer numerical control (CNC) router is proposed. The proposed DfM model relies fundamentally in two supporting factors; the implementation of design heuristics that integrates production knowledge and the availability of some design related to production evaluation metrics. Subsequently, we test and refine the model using structured design experiences. This was accomplished by capturing new design heuristics and detecting useful evaluation metrics for production. In the final part of the research, a refined DfM model was tested in a component design case study. The case study is based on producing a curved surface module on wood for an existing proprietary component based wall system. As a summary, we conceptualize from this top-down development approach to create a design for manufacturing model that integrates design and construction in architecture, based on three possible applications fields: Design processes improvement, building production process improvement, CAD-CAM tools development. Our purpose is to provide better foundational constructs and approaches for integrating design with manufacturing in architecture.
keywords	Design for Manufacturing; Design Cognition; Digital Fabrication
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2009_078
id	ecaade2009_078
authors	Lyon, Eduardo
year	2009
title	Digital Fabrication and Component Optimization Using DFM: Integrating Two-dimensional Cutting and Three-dimensional Milling in Wood Panel Fabrication
doi	https://doi.org/10.52842/conf.ecaade.2009.565
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 565-572
summary	This research explores new ways to integrate manufacturing knowledge in to design phases. Through the use of design for manufacturing (DfM) concept, and looking at relations between its potential application in component design and its implementation using digital manufacturing technologies, the author implemented a DfM model that varies from previous models by incorporated learning in the process. This process was based on; a knowledge systematization process; and the incremental development and refinement of design heuristics and metrics. Subsequently the attempt on this research is twofold. One is to realize a process to capture and organize manufacturing knowledge, and second to organize that knowledge and make it available as a DfM model for component design using specific CNC technology.
wos	WOS:000334282200068
keywords	Design Computing, design for manufacturing, knowledge based design, digital manufacturing
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2005_120
id	sigradi2005_120
authors	Lyon, Eduardo; Charles Eastman
year	2005
title	Design for manufacturing in architecture: mapping between the design and fabrication of curved surfaces
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 120-125
summary	This paper explores new ways to integrate manufacturing processes information in to design phases. Through the analysis of related fields and looking at the relations between its design methods and production processes, we analyze design processes and design representations that already have embedded in them specific ways to materialize through production the artifacts they define. Subsequently, we explore curved surface fabrication using cutting and bending technologies. As a summary, we conceptualize from this top-down development approach to design a framework that integrates design and construction in architecture, based on three possible applications fields: 1.) Design processes improvement; 2.) Building production process improvement; 3.) CAD-CAM Tools development. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ac20
authors	Lyons, Arthur and Doidge, Charles
year	1993
title	Understanding Structural Movement Joints with CAAD Animation
doi	https://doi.org/10.52842/conf.ecaade.1993.x.p3d
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	The well-established use, as an architectural design tool, of computer graphics using 'fly-through' techniques gives a highly visual overview of design concepts and may additionally illustrate certain specific details, but it cannot show their time-dependent dynamic function. This paper describes and illustrates how CAAD animation can be used to analyse not only structural philosophy but also the dynamic effects of nonstatic loading and thermal movement, thus leading to a better understanding of the design criteria applied in certain elegant solutions. The CAAD video animations illustrate the structural philosophy relating to the facade of the refurbished Bracken House, London and the dynamic operation of key movement junctions within Stansted Airport and East Croydon Railway Station.
keywords	Structure, Movement Joints, Animation, Video
series	eCAADe
last changed	2022/06/07 07:50

_id	6f6a
authors	Lyons, Arthur and Doidge, Charles
year	1994
title	The Animation of Dynamic Architecture
doi	https://doi.org/10.52842/conf.ecaade.1994.x.q6a
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 233
summary	The most valuable resource in education is student time and the greatest asset is the ingenuity of student minds. CAD technology now offers enormous potential to education, but limitations in time and funding, prevent its use to the extent possible within practice. Therefore, after dealing with 'awareness', 'attitude' and 'limited applications', our most important role in education is to encourage innovation. The third year of the honours option course at De Montfort University takes this as its theme and challenges students to explore and exploit innovative applications. One particular area of development has been exploring the dynamic aspects of architectural design which go much further than the well-established 'fly-through' sequences. A great deal of architectural design and design development depends upon dynamic issues which range from movement joints to construction sequence. A visual understanding of these dynamic issues drawn from appropriate computer animations can now be an effective factor in design.
series	eCAADe
last changed	2022/06/07 07:50

_id	ascaad2023_069
id	ascaad2023_069
authors	lºbilir, Sümeyye
year	2023
title	A Method Proposal for 3D Digital Modelling of Historical Ottoman Fountains
source	C+++: Computation, Culture, and Context – Proceedings of the 11th International Conference of the Arab Society for Computation in Architecture, Art and Design (ASCAAD), University of Petra, Amman, Jordan [Hybrid Conference] 7-9 November 2023, pp. 90-108.
summary	Historical buildings are in critical position in terms of heritage value with their role in examination and preservation of urban culture and identity. Historical buildings are affected by changes in physical and social environment. Consequently, they face risks such as deformation and destruction. Considering that documentation of historical buildings provides contributions to research, conservation and restoration studies. Fountains, public elements of Ottoman civil architecture, hold significant positions in cultural and architectural heritage. Creation of 3D digital models of Ottoman fountains will also make significant contributions to studies. This study aims to search for method for 3D digital modelling of Ottoman fountains through example of III. Ahmed Fountain. Ottoman fountains contain common characteristics and typological elements coming from construction period, location and architectural style. This study presents modelling method combines multiple techniques for 3D digital modelling of fountains, due to inadequacy of single modelling method in conveying details, and applicability of chosen method to digital modelling process of fountains with different characteristics. In this study, research was carried out on different modelling methods to create most detailed and accurate model. Fountain elements are classified into three subgroups as main mass, details and regular elements to apply most appropriate modelling methods. Main mass was shaped on Rhinoceros using geometry-based modelling method, while ornaments in regular elements group were created in Grasshopper with parametric modelling. Detail elements were created in Agisoft Metashape with photogrammetric modelling to convey in detail. This study presents gradual method proposal with multiple techniques but also tries to include suggestions for problems encountered in modelling process of historical buildings. In this context, texture and geometry deformations in scanning models were corrected with ZBrush, and color differences caused by effect of light and shadow were tried to be solved by creating new texture maps on Adobe Substance 3D Sampler.
series	ASCAAD
email
last changed	2024/02/13 14:40

_id	sigradi2022_296
id	sigradi2022_296
authors	Lãcãtusu, Alexandra Adelina; Cruz, Marcos; Parker, Brenda; Salmane, Anete Krista
year	2022
title	Biocentric Design: Mapping Optimal Environmental Variables for Moss Propagation on Urban Bioreceptive Surfaces
source	Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 1251–1262
summary	The biocolonisation of urban building surfaces by mosses is a ubiquitous and naturally occurring phenomenon that encapsulates immense ecological value for both current and future challenges of life in cities. The miniature ecosystems facilitated by mosses capture atmospheric pollutants and maintain local biodiversity by providing shelter and nutrients for a highly diverse set of organisms across all kingdoms of life. Early establishment and growth of bryophyte communities appear to be influenced by a dynamic mix of biotic and abiotic factors, while environmental cues modulate physiological responses and biochemical exchanges. A prototype monitoring device was designed to measure carbon dioxide uptake under variable light, humidity, and temperature conditions during a 3-week experiment. By providing a non-destructive tool for understanding and visualising the impact of environmental variables on photosynthetic behaviour, the device contributes to a biocentric design practice, where an organism’s ecological needs begin to drive the development of bioreceptive micro-environments.
keywords	Living things, Bioreceptive design, Moss ecophysiology, Photosynthetic behaviour, Environmental monitoring
series	SIGraDi
email
last changed	2023/05/16 16:57

For more results click below: