Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1638

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2013_189
id	sigradi2013_189
authors	Bruscato, Underléa; Clariana Fischer Brendler; Felipe Schneider Viaro; Fábio Gonçalves Teixeira; Régio Pierre da Silva
year	2013
title	Uso da Fabricação Digital e Prototipagem no Desenvolvimento do Projeto de Produto: Análises do Produto através de Simulações Digitais [Digital Manufacture and Rapid Prototyping in Product Design Development: Product Analysis through Digital Simulation]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 459 - 463
summary	The aim of this paper is to design a public facilitie using both digital manufacture and rapid prototyping design methods. These new technologies have been used in product design development by some ways: helping in the comprehension of complex geometries; used as tools for analyzing the design process, thus avoiding errors in the project. The analysis were carried out using virtual simulation tests and physical prototype in reduced scale. The prototype was manufactured using the 3D printer V-Flash in the Virtual Design Laboratory – UFRGS, where positive and negatives aspects were identified and described.
keywords	Digital manufacture; Rapid prototyping; Virtual simulation; Product design; Urban facilities
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2013_64
id	sigradi2013_64
authors	Cardoso, Eduardo; Sérgio Leandro dos Santos; Fábio Pinto da Silva; Fábio Gonçalves Teixeira; Tânia Luísa Koltermnann da Silva
year	2013
title	Tecnologias Tridimensionais para Acessibilidade em Museus [Three-dimensional Technologies for Accessibility in Museums]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 444 - 448
summary	New technologies for 3D scanning and digital fabrication have greatly contributed to the research and production of artifacts and accessibility services to artistic fruition in museums. Thus, this article presents the results of research conducted in the discipline of 3D Technologies of the Design Graduate Program at the Federal University of Rio Grande do Sul. The work consisted in the research, selection and employment of scanning technologies for 3D scanning of artifacts from the Museum's collection Joaquim José Felizardo - Porto Alegre - RS, for subsequent production of tactile replicates, as an example and validation of these applications in this context.
keywords	Accessibility, Museums, Three-dimensional scanning, Digital fabrication
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	cf2013_167
id	cf2013_167
authors	Carlow, Jason F. and Kristof Crolla
year	2013
title	Shipping Complexity: Parametric Design for Remote Communities
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 167-175.
summary	This paper presents a system for design and construction of a parametrically designed, structural shell for remote communities. It explains how, through the use of various digital software platforms, a single-layer, structural shell is designed and optimized and subsequently how a series of customized joints can be output for direct digital fabrication. As the customization is focused primary in the joints of the structure, standard dimension, locally sourced structural members can be used. By embedding assembly information onto the physical joints, the system has the capacity to simplify the construction of complex shell structures by workers with basic construction skills. Flat-packed joints can be shipped to remote sites without heavy structural members thereby reducing transportation costs and the overall embodied energy. By lowering cost and simplifying construction of large span structures, the project is intended to extend the benefits of digitally driven design to rural, remote or under-privileged communities.
keywords	Parametric design, structural shell, remote communities, embedded intelligence, digital fabrication.
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	sigradi2013_414
id	sigradi2013_414
authors	Economou, Athanassios
year	2013
title	f(xn): Explicit and Recursive Definitions of Architectural Typology
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 211 - 216
summary	The notion of a generative description of architectural typology is discussed. Two different approaches are identified and contrasted in terms of their expressive power in design. The building type of the courthouse is selected to showcase and test the approach. One case study is briefly presented to pictorially illustrate the findings.
keywords	Computation; Typology; Shape grammars; Courthouse design; Variation
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	caadria2013_123
id	caadria2013_123
authors	Erhan, Halil I.; David Botta, Andy T. Huang and Robert F. Woodbury
year	2013
title	Peripheral Tools to Support Collaboration: Probing to Design Collaboration Through Role-Playing
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 241-250
doi	https://doi.org/10.52842/conf.caadria.2013.241
wos	WOS:000351496100024
summary	Peripheral devices like smart phones offer an opportunity to lower the barrier to spontaneous collection and sharing of information during distributed collaboration. We have completed development of guidelines and a framework that focuses on peripheral devices in collaboration. In order to explore the design space generated by our principles, we conducted a role-playing experiment about commissioning a building, in which an “on-site” team and a “design” team were expected to find and resolve discrepancies between requirements, design documents, and the actual site. The teams were given Styrofoam panels to act as pretend smart peripherals to invoke play and help probe the design space. We found that “reflection on action” (debriefing and subsequent brainstorming) was fruitful for ideation and theorem building about interaction, but “reflection in action” failed. Yet, reflection in action, particularly with such probes, is important to capture the “mechanics of collaboration”. Therefore, we are considering adapting improvisational theatre to our study of distributed collaboration.
keywords	Collaborative design, Design support tool, Interactive media, Role-playing, Extended cognition
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2013_119
id	ecaade2013_119
authors	Heinzelmann, Florian; Bristogianni, Telesilla and Teuffel, Patrick
year	2013
title	Adaptive Fluid Lens and Sunlight Redirection System
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 49-58
doi	https://doi.org/10.52842/conf.ecaade.2013.2.049
wos	WOS:000340643600004
summary	The paper describes a novel system to alter and redirect sunlight under large span roofs with the help of a fluid lens system. Focus lies on the computational design, testing, measurement and evaluation of the performance of a physical prototype.
keywords	Daylight; large span roofs; optics.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	acadia13_191
id	acadia13_191
authors	Maleki, Maryam M.; Woodbury, Robert F.
year	2013
title	Programming In The Model — A New Scripting Interface for Parametric CAD Systems
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 191-198
doi	https://doi.org/10.52842/conf.acadia.2013.191
summary	Programming, often called scripting, has become a key feature in most CAD systems and an equally key area of expertise in CAD. However, programming surrenders many of the benefits of direct manipulation and introduces notational elements that are cognitively distant from the designs being created. In addition, it creates barriers to use and is often perceived as being too difficult to apply. We introduce Programming In the Model (PIM) through a prototype, implementing live side-by-side views, multi-view brushing and highlighting, live scripting, auto- translating from modeling operations to script and localized relational information within model windows. A qualitative user study confirms PIM’s features and raises issues for future development. A key result is the need for multi-directional extreme liveness , that is, maintaining consistency of action across views at the smallest possible scale. We argue that PIM principles are applicable in textual and visual programming alike.
keywords	tools and interfaces, end-user programming, parametric design, scripting, human computer interaction, live programming
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:59

_id	caadria2014_057
id	caadria2014_057
authors	Nakapan, Walaiporn
year	2014
title	Mobile Learning in a History of Art and Architecture Classroom
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 761–770
doi	https://doi.org/10.52842/conf.caadria.2014.761
summary	This paper presents a pilot project, using mobile devices in a History of Art and Architecture classroom to enhance instructor-student classroom interactions and student learning. At our Faculty of Architecture this particular class has a usual high failure rate (26% F in 2012). It is a compulsory course for architecture students, some of them are required to take this course twice or more before they can graduate. Traditional learning is lecture-based, and students studying toward their tests are often overloaded with information. In June 2013, Rangsit University initiated a new policy to provide tablets to every freshmen; around 7,200 tablets were distributed campus-wide (Samsung Galaxy Note 10.1 with S-pen). Toward the end of the class, the students were asked to complete a questionnaire in order to find out what they think about mobile learning. Typically, students are quite satisfied, and give positive feedback in their comments. The experience gained from this pilot project will be extended to other classes.
keywords	Design education; Mobile learning; History of Art and Architecture
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2013r_002
id	ecaade2013r_002
authors	Neves, Isabel C.; Rocha, J.
year	2013
title	The contribution of Tomas Maldonado to the scientific approach to design at the beginning of computational era. The case of the HfG of Ulm.
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 39-50
summary	Nowadays the use of computational design processes in architecture is a common practice which is currently recovering a set of theories connected to computer science developed in the 60`s and 70`s. Back then, such pioneering experiences were carried out by an interest in employing scientific principles and methodologies in architectural design, which, with the help of computers, were developed in Research Centres mainly located in the USA and the UK. Looking into this period, this paper investigates the relevance of the German design school of the Hochschule für Gestaltung of Ulm to the birth of computation in architecture. Even though there were no computers in the school, this paper argues that the innovative pedagogies introduced by a group of distinct professors built clear foundations that can be understood as being at the basis of further computational approaches in architecture.This paper focuses on the remarkable work done by Tomas Maldonado. His contribution was paramount in the emergence of analogical ways of computer design thinking. This analysis ultimately wants to emphasize how the HfG Ulm’s role and its scientific approach have paved the way for the onset of the computational era in architecture.
keywords	HfG - Hochschule für Gestaltung Ulm; Educational Project; Semiotics; Operational Research; Computational Design; Architecture
email
last changed	2013/10/07 19:08

_id	caadria2013_009
id	caadria2013_009
authors	Neves, Isabel Clara; João Rocha and José Pinto Duarte
year	2013
title	The Legacy of the Hochschule Für Gestaltung of Ulm for Computational Design Research in Architecture
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 293-302
doi	https://doi.org/10.52842/conf.caadria.2013.293
wos	WOS:000351496100029
summary	Nowadays the use of computational design processes in architecture is a common practice which is currently recovering a set of theories connected to computer science that were developed in the 60’s and 70’s. Such pioneering explorations were marked by an interest in employing scientific principles and methodologies many developed in Research Centres located in the US and the UK. Looking into this period, this paper investigates the relevance of the German design school of the Hochschule für Gestaltung (HfG) Ulm to the birth of computation in architecture. Even thought there were no computers in the school. It is argued that the innovative pedagogies and some distinct professors have launched clear foundations that can be understood as being at the basis of further computational approaches in architecture. By describing and relating the singular work by Tomas Maldonado (educational project), Max Bense (information aesthetics) and Horst Rittel (scientific methods), this paper describes the emergence of analogical ways of computational design thinking. This analysis ultimately wishes to contribute for inscribing the HfG Ulm at the cultural and technological mapping of computation in architecture.
keywords	HfG - Hochschule für Gestaltung Ulm, Design methods, Scientific methodology, Information aesthetics, Computational design, Architecture
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ecaade2013_039
id	ecaade2013_039
authors	Papadonikolaki, Eleni; Koutamanis, Alexander and Wamelink, J. W. F. (Hans)
year	2013
title	Attaining Performance with Building Information Modelling
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 475-483
doi	https://doi.org/10.52842/conf.ecaade.2013.2.475
wos	WOS:000340643600048
summary	The paper presents the findings of a systematic literature review of approximately 200 scientific sources. It is designed with the aim to identify the current benefits and factors of high performance in Architecture, Engineering, Construction (AEC) since the introduction of Building Information Modelling (BIM). We formed and confirmed two main propositions associating the performance of the AEC to the use of BIM. The mapping of the current impact and benefits of BIM showed that the role of the managers, suppliers, owners and authorities is underestimated, as well as the initiation and use stage of project development. At the same time, the performance in the AEC industry can be improved by an array of possibilities where IT research and policy-making authorities contribute – from establishing new collaboration protocols until improving existing or creating new BIM tools.
keywords	Building Information Modelling (BIM); Architecture, Engineering and Construction (AEC); supply chain management; life-cycle phases; stakeholders.
series	eCAADe
email
last changed	2022/06/07 08:00

_id	sigradi2022_106
id	sigradi2022_106
authors	Pereira Espíndola, Fábio; Belluzzo de Campos, Gisela
year	2022
title	Ubiquent Narratives for the Design of Natural and Invisible Interfaces
source	Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 629–638
summary	The article proposes to explore the concepts of storytelling (Lupton, 2020 and Xavier, 2015) and ubiquity (Santaella, 2013 and Santos, 2021) applied to the design of natural and invisible interfaces (Benyon, 2011). With Natural Interface it is possible to interact with devices directly, without needing the help of a mouse or keyboard. To do so, it presents as a case study the project “Criatura de Luz” (2015), by Estúdio Guto Requena, carried out to compose the new facade of the WZ Hotel (Sao Paulo). The purpose of this research is to understand the role of the designer in the creation of interfaces that are not only interactive, but that begin to propose immersive and ubiquitous narratives in design projects and the method for this analysis will be the case study from the design perspective as storytelling proposed by Lupton (2020). The aim is to do exploratory research to provide greater familiarity with the problem.
keywords	Storytelling. ubiquitous computing. Interface design. Natural and invisible interfaces
series	SIGraDi
email
last changed	2023/05/16 16:56

_id	ecaade2013r_010
id	ecaade2013r_010
authors	Pinto, Guilherme; Vieira, Andrea P.; Neto, Pedro L.
year	2013
title	Parametric urbanism as digital methodology. An urban plan in Beijing
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 121-132
summary	Evolution and innovation in architecture are intensely related to the rise and developments of technology. Within this context, it is possible to recognize how in recent decades this milieu has fostered the development of new methodologies for urban design and architectural practice, as is, for example, the Parameterization. This paper is focused on the subject of Parametric Urbanism: discussing / questioning the emergence of this new architectural methodology; addressing the factors that contributed to its appearance; and seeking to understand whether the parametric approach has benefits and whether it may or may not be a solution or of assistance to urban planning. The paper provides a brief literature review focused on parametric urbanism and then it presents a practical case study of parametric urbanism: an Urban Plan in Beijing, developed in an academic context, at the University École Polytechnique Fédérale de Lausanne in 2012. Having as base diverse examples of parametric urbanism, it is tried to identify/justify decisions defining principles and application guidance for this project. The conclusion presents the final considerations based on opposing the case study with the theoretical approach, seeking to clarify whether this new kind of urban design methodology, Parametric Urbanism, is or not viable.
keywords	Parametric Urbanism; urban design; urban design methods; sustainability urbanism; Parametric digital tools
email
last changed	2013/10/07 19:08

_id	ecaade2013_001
id	ecaade2013_001
authors	Stouffs, Rudi and Sariyildiz, Sevil (eds.)
year	2013
title	Computation and Performance, Volume 2
source	Proceedings of the 31st International Conference on Education and research in Computer Aided Architectural Design in Europe, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, 738 p.
doi	https://doi.org/10.52842/conf.ecaade.2013.1
summary	This is the second volume of the conference proceedings of the 31st eCAADe conference, held from 18-20 September 2013 at the Faculty of Architecture of Delft University of Technology in Delft, the Netherlands. Both volumes together contain 150 papers that were submitted and accepted to this conference.The theme of the 31st eCAADe conference is the role of computation in the consideration of performance in planning and design. Since long, a building no longer simply serves to shelter human activity from the natural environment. It must not just defy natural forces, carry its own weight, its occupants and their possessions, it should also functionally facilitate its occupants’ activities, be aesthetically pleasing, be economical in building and maintenance costs, provide temperature, humidity, lighting and acoustical comfort, be sustainable with respect to material, energy and other resources, and so forth. Considering all these performance aspects in building design is far from straightforward and their integration into the design process further increases complexity, interdisciplinarity and the need for computational support.One of the roles of computation in planning and design is the measurement and prediction of the performances of buildings and cities, where performance denotes the ability of buildings and cities to meet various technical and non-technical requirements (physical as well as psychological) placed upon them by owners, users and society at large.This second volume contains 75 papers grouped under eleven subthemes that vary from Simulation, Prediction and Evaluation over Models of Computation: Human Factors to Languages of Design.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2013_000
id	ecaade2013_000
authors	Stouffs, Rudi and Sariyildiz, Sevil (eds.)
year	2013
title	Computation and Performance, Volume 1
source	Proceedings of the 31st International Conference on Education and research in Computer Aided Architectural Design in Europe, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, 726 p.
doi	https://doi.org/10.52842/conf.ecaade.2013.2
summary	This is the first volume of the conference proceedings of the 31st eCAADe conference, held from 18-20 September 2013 at the Faculty of Architecture of Delft University of Technology in Delft, the Netherlands. Both volumes together contain 150 papers that were submitted and accepted to this conference.The theme of the 31st eCAADe conference is the role of computation in the consideration of performance in planning and design. Since long, a building no longer simply serves to shelter human activity from the natural environment. It must not just defy natural forces, carry its own weight, its occupants and their possessions, it should also functionally facilitate its occupants’ activities, be aesthetically pleasing, be economical in building and maintenance costs, provide temperature, humidity, lighting and acoustical comfort, be sustainable with respect to material, energy and other resources, and so forth. Considering all these performance aspects in building design is far from straightforward and their integration into the design process further increases complexity, interdisciplinarity and the need for computational support.One of the roles of computation in planning and design is the measurement and prediction of the performances of buildings and cities, where performance denotes the ability of buildings and cities to meet various technical and non-technical requirements (physical as well as psychological) placed upon them by owners, users and society at large.This first volume contains 75 papers grouped under eleven subthemes that vary from Design Decision-Making over Spatial Performance and Space Syntax to Digital Fabrication.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	caadria2013_000
id	caadria2013_000
authors	Stouffs, Rudi; Patrick Janssen, Stanislav Roudavski and Bige Tunçer (eds.)
year	2013
title	Open Systems
source	Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2012, 977 p.
doi	https://doi.org/10.52842/conf.caadria.2013
summary	Contemporary challenges require inclusively integrated approaches to designing. Constrained by established modes of practice, such integration is impossible without a radical commitment to openness. In response to this need, the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) brought together contributions that engage with open systems in all aspects of architectural and urban design: open with respect to the scale of the design objectives and the context, from a building component within a building system to a neighbourhood or city within its urban and rural context; open with respect to the domains being considered, from planning to sustainable performance of a building or city; open with respect to the collaboration of disciplines and participants, from ad-hoc brainstorming to a rigorous process of consultation and feedback; open with respect to design methods and techniques, from physical modelling to digital prototyping; open with respect to design models and representations being adopted, from a parametric exploration to an ontological delineation considering Building Information Modelling, Built Environment Modelling or City Information Modelling; open with respect to the tools and applications being adopted, despite interoperability issues, from modelling to simulation and assessment; open with respect to the learning approach being adopted, from informal interaction and sharing to formal design education; open with respect to the open source approach being adopted in research and development, in order to gather community involvement and use. The conference was held 15-18 May 2013 at the Department of Architecture, School of Design and Environment, at National University of Singapore.By focusing on the theme of Open Systems, CAADRIA 2013 aimed to explore all these aspects and more, and raise awareness to the need of breaching disciplinary boundaries and reaching creative communities at all levels of expertise, by pooling resources, knowledge and practices, and integrating them through the adoption of open systems.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	sigradi2021_246
id	sigradi2021_246
authors	Turazzi Luciano, Patrícia, Stofella, Arthur, Klein Taparello, Gladys Ilka and Vaz, Carlos Eduardo Verzola
year	2021
title	Designing Possible Futures: An Approach to Design Fiction in Architecture
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 115–126
summary	Among several possible approaches for design process, Design Fiction stimulates the production of fictional universes in the search for innovation, exploration and creative provocation for the development of built environments. The aim of this article is to present results of the exploration of this approach in the context of architectural projects, based on the works of Markussen and Knutz (2013) and Plowright (2020). The work proposal for two workshops through webconference was based on fiction works pre-selected, from which students could choose at least one to use its narrative as a foundation to develop their own project. Thus, all three projects developed explore socio-technical, ecological and emotional characteristics of the inhabitants of created narratives, bringing them closer to an approach that has a greater focus on the relationship and interaction between user and built environment.
keywords	Design Fiction, Arquitetura, Processo de Projeto, Futurismo, Ficçao Projetual
series	SIGraDi
email
last changed	2022/05/23 12:10

_id	cf2013_130
id	cf2013_130
authors	Yuan, Philip F.; Eleni Sotiriou, and Mei Zhang
year	2013
title	Modular Digital Tectonics: Algorithmic Optimization of a Glass Component Wall for a Customized Fabrication Method
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 130-138.
summary	This paper examines the implications of digital fabrication techniques on design and tectonics, through the example of a double-curvature glass-brick wall, designed and constructed in the context of ongoing research on modular tectonics by the architectural practice of Archi-Union. The high level of form complexity posed a great challenge for fabrication and gave rise to an alternate solution: customization and prefabrication of the supporting steel frame through a CNC rod-bending machine output a robust structure which allowed for accurate and fast placement of the bricks, thus minimizing costs, construction time and preserving design integrity. Therefore, the design orientated towards fabrication, and an algorithmic method that took into consideration production parameters was developed to optimize the structure. Realization of this prototype helps support our methodology for control of complexity in non-standard geometries which is based on adapting the design approach to customized fabrication methods.
keywords	Digital Fabrication, digital tectonics, component architecture, algorithmic design, CNC rod-bending
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	cf2013_139
id	cf2013_139
authors	Yuan, Philip F.; Mei Zhang, and Li Han
year	2013
title	Low-Tech Digital Fabrication: Traditional Brick as Material in Digital Practice
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 139-148.
summary	Advanced digital fabrication methods are not widely accessible in a developing country like China, where investment in high construction technology is slow and the already known construction methods and manual labour are preferred. The question addressed here is how to put advanced design ideas into practice in developing countries. In order to realize digital architecture in China the fabrication field cannot merely depend on high-technology and avoid low-technological means. The present paper goes through two projects of the Chinese architectural practice Archi-Union to discuss how, through appropriate application of computational technology, digital fabrication revitalizes traditional fabrication techniques, by developing computational aids to traditional construction. In particular, we emphasize the integration of digital fabrication, low-technology and traditional local material.
keywords	Digital design, Low-technology fabrication, Brick
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	acadia13_391
id	acadia13_391
authors	Abbasy-Asbagh, Ghazal
year	2013
title	[re]folding Muqarnas: A case study
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 391-392
doi	https://doi.org/10.52842/conf.acadia.2013.391
summary	This project uses folded surface as a mechanism to make a historically non-structural system, Muqarnas, into one that combines surface and structure.
keywords	structural optimization, folded surface, cultural landscapes, muqarnas, complex geometry
series	ACADIA
type	Design Poster
email
last changed	2022/06/07 07:54

For more results click below: