Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2253

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2013_135
id	sigradi2013_135
authors	Borges de Vasconselos, Tássia; Adriane Borda Almeida da Silva
year	2013
title	Identificação de Geometrias Implícitas na Arquitetura a Partir de Realidade Aumentada [Alignment Identification of Implicit Geometries in Architecture from Augmented Reality]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 44 - 48
summary	For the initial stages of architectural training one of the strategies traditionally used is to study design cases. This exercise can help in the comprehension of implicit geometries and design processes. The use of the golden ratio, for example, is recurrent in the history of architecture. However, adequate instruments are necessary for this kind of statement. This paper demonstrates the use of Augmented Reality with this goal: virtual elements are viewed overlaying the architecture or its representation, configuring a “digital proportion measurer”. The comprehension of known architectural practices assists in structuring methods and constructing repertoires for architectural design.
keywords	Architecture analysis; Geometry; Augmented reality; Digital proportion measurer
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2013_281
id	sigradi2013_281
authors	Braida Rodrigues de Paula, Frederico; Lara Scanapieco Barreto; Felipe Arlindo Silva; Fernando Lima; Vinícius Morais
year	2013
title	Maquetes Híbridas: Diálogos Entre as Técnicas Tradicionais e as Tecnologias Digitais no Processo Projetual [Hybrid Models: Dialogues Between Traditional Techniques and Digital Technologies in the Design Process]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 49 - 53
summary	This article is about hybrid models, as a kind of three-dimensional representation emerged from of the possibilities of combining traditional techniques with digital technologies. The purpose is to reflect on the possibilities of production and applications of these types of hybrid models, highlighting them as recurring elements of design practice after the rise of new technologies of information and communication, and prototyping and digital manufacturing. By adopting the model as an object of research, we propose to expand the field of reflection on the incorporation of several digital technologies in the design process, specifically aspects of three-dimensional and graphical representation.
keywords	Hybrid models; Digital technologies; Architecture and Urbanism
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2013_64
id	sigradi2013_64
authors	Cardoso, Eduardo; Sérgio Leandro dos Santos; Fábio Pinto da Silva; Fábio Gonçalves Teixeira; Tânia Luísa Koltermnann da Silva
year	2013
title	Tecnologias Tridimensionais para Acessibilidade em Museus [Three-dimensional Technologies for Accessibility in Museums]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 444 - 448
summary	New technologies for 3D scanning and digital fabrication have greatly contributed to the research and production of artifacts and accessibility services to artistic fruition in museums. Thus, this article presents the results of research conducted in the discipline of 3D Technologies of the Design Graduate Program at the Federal University of Rio Grande do Sul. The work consisted in the research, selection and employment of scanning technologies for 3D scanning of artifacts from the Museum's collection Joaquim José Felizardo - Porto Alegre - RS, for subsequent production of tactile replicates, as an example and validation of these applications in this context.
keywords	Accessibility, Museums, Three-dimensional scanning, Digital fabrication
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	caadria2013_202
id	caadria2013_202
authors	Dai, Qun and Marc Aurel Schnabel
year	2013
title	Pedestrian Thermal Comfort in Relation to Street Zones with Different Orientations – A Pilot-Study of Rotterdam
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 219-228
doi	https://doi.org/10.52842/conf.caadria.2013.219
wos	WOS:000351496100022
summary	This paper presents the impacts of different street orientations and street zones of a typical Dutch residential area on micro-scale human thermal comfort. The spatial and temporal variation of mean radiant temperature (T mrt ) of a typical summer day in Rotterdam, The Netherlands, is simulated by using an established long- and short-wave 3D radiation fluxes model (SOLWEIG). This model calculates human radiation load and expresses this as a T mrt . Hereby we simulate and analyse the T mrt variations for three zones of a street consisting of a centre area for cars and the adjacent pedestrian zones for pedestrians and bicycles. The streets are azimuth rotated. The simulation and analysis results show various T mrt patterns of the three zones in the different orientations at different periods during daytime. We show that the spatial distribution of T mrt at street level strongly depends on street orientation and street zone. This is crucial since optimizing street configuration will directly influence the human thermal comfort in relation to street orientation and street zone. Finally we present a time adjusted framework of thermal comfort and classify the various T mrt for each zone and orientation.
keywords	Thermal comfort, Street orientation, Street zone, Mean radiant temperature (T mrt ), Solweig
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	cf2013_306
id	cf2013_306
authors	Dai, Qun and Marc Aurel Schnabel
year	2013
title	Relationship between Mean Radiant Temperature and Building Type for Pedestrians in Rotterdam
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 306-314.
summary	Outdoor thermal comfort for pedestrians becomes important issues in urban planning affecting everyone’s daily lives. Mean Radiant Temperature (T mrt ) is one of the most important parameters in micro climate. In this study, we built a computerised model with variable and typical building types. Then a radiation model SOLWEIG was used to simulate pavements’ T mrt spatial variations. We analysed and discussed the simulation results by comparing different building types. We used RayMan to find some relationship between thermal comfort index PET or PMV. Our finding can act as a reference for architects and planners to make design decisions on quantifying the thermal comfort in specific urban environment and their building types.
keywords	Mean radiant temperature (T mrt ), pedestrians, thermal comfort index, spatial variations
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2015_120
id	ecaade2015_120
authors	Daoud, Bassam and Voordouw, Johan
year	2015
title	Making Machines that Make Buildings - Constructing a Mobile 3D Printer for Concrete Elements
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 355-359
doi	https://doi.org/10.52842/conf.ecaade.2015.2.355
wos	WOS:000372316000041
summary	This paper is both a fundamental and applied study of the multi-faceted design and fabrication issues related to the construction of a mobile 3D printer. The paper signifies the halfway point in a project initiated at the Azrieli School of Architecture and Urbanism at Carleton University starting in 2013. The printer, entitled 3DB, intends to print concrete elements for the Architecture, Engineering and Construction industry. The printer frame was designed to fit within the bed of a typical half-ton pick up truck or contract trailer. The paper describes the design, simulation and construction of the steel frame, gantry and extruder and makes speculation on future research including improved design of the extruder and nozzle mechanism.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2013_177
id	sigradi2013_177
authors	Dávila Cordido, Mariolly
year	2013
title	Estudio para la Valoración y Recuperación del Patrimonio Arquitectónico Religioso Venezolano a través de Técnicas Digitales: Iglesia De San Jacinto, Caso De Estudio [Study for Assessment and Recovery of Venezuelan Religious Architectural Heritage Through Digital Techniques: Church of San Jacinto, Case Study]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 177 - 181
summary	The purpose of this paper is to implement a methodology for the recovery of religious architectural heritage of Venezuela, exemplified in a case study: the virtual reconstruction of the church of San Jacinto, located in Caracas. The methodology consists of four stages: two investigative, graphic and informative stage using QR codes. As hypothesis is proposed that, given the limited existing documentation, should supplement the study and lifting Venezuelan Canarian churches with altarpieces and, based on that, characterize and play virtually Venezuelan colonial church model.
keywords	Colonial architecture; Religious heritage; Virtual reconstruction; Visual simulation; QR
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	caadria2013_123
id	caadria2013_123
authors	Erhan, Halil I.; David Botta, Andy T. Huang and Robert F. Woodbury
year	2013
title	Peripheral Tools to Support Collaboration: Probing to Design Collaboration Through Role-Playing
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 241-250
doi	https://doi.org/10.52842/conf.caadria.2013.241
wos	WOS:000351496100024
summary	Peripheral devices like smart phones offer an opportunity to lower the barrier to spontaneous collection and sharing of information during distributed collaboration. We have completed development of guidelines and a framework that focuses on peripheral devices in collaboration. In order to explore the design space generated by our principles, we conducted a role-playing experiment about commissioning a building, in which an “on-site” team and a “design” team were expected to find and resolve discrepancies between requirements, design documents, and the actual site. The teams were given Styrofoam panels to act as pretend smart peripherals to invoke play and help probe the design space. We found that “reflection on action” (debriefing and subsequent brainstorming) was fruitful for ideation and theorem building about interaction, but “reflection in action” failed. Yet, reflection in action, particularly with such probes, is important to capture the “mechanics of collaboration”. Therefore, we are considering adapting improvisational theatre to our study of distributed collaboration.
keywords	Collaborative design, Design support tool, Interactive media, Role-playing, Extended cognition
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2021_412
id	caadria2021_412
authors	Estrina, Tatiana, Hui, Vincent and Ma, Lena
year	2021
title	The Digital Design Build - Modes of Experiential Learning in the Pandemic Era
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 2, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 41-50
doi	https://doi.org/10.52842/conf.caadria.2021.2.041
summary	In recent years, academia has deviated from the lecture-based model to a hybridized system of instruction and experiential learning. Experiential learning aids students in understanding collaborative processes in architectural praxis and exposes them to engaging learning opportunities, a critical component of architectural studio education (Nijholt et al. 2013). During the COVID-19 outbreak, students are barred from accessing on-campus facilities. This causes a redevelopment of curricular delivery and disrupts experiential learning which heavily relies on in-person interaction. It is imperative for instructors to retain experiential learning in the transition to virtual instruction. This paper explores experiential learning within virtual platforms for instruction. Through outlining the implementation of technologies, capitalizing on connectivity, and maximizing opportunity for digital problem solving, the authors posit a framework that other educators may adopt. The paper concludes with a case study of a virtual design-build project, and the various techniques implemented in retaining experiential learning during the pandemic.
keywords	Pedagogy; Experiential learning; Social connectivity; Resilience; Disrupted education
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	sigradi2013_28
id	sigradi2013_28
authors	González Böhme, Luis Felipe; Cristián Calvo Barentin; Mauro Chiarella
year	2013
title	Métodos Computacionales en Arquitectura: La Formación de Arquitectos con Competencia en CyT [Computational Methods in Architecture: The Education of Architects with Competence in S&T]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 524 - 528
summary	Tomorrow’s architects will need to deal more confidently and skillfully with scientific and technological innovations in their field, e.g., parametric design, building physics, construction robotics, home automation, etc. Architecture students today must understand how things work and absorb some of the basic principles and techniques involved in their design, construction or operation. Now students need to build back some of that analytical, logical, critical, and analogical thinking that may have atrophied due to a traditional architectural education. Playing with toy construction kits for building automatic control and mobile robot models, does the job without losing the architect´s approach and attitude.
keywords	Architectural education; Construction kits; Educational computing; Active learning; Learning styles
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ecaade2013_006
id	ecaade2013_006
authors	Junk, Stefan and Côté, Samantha
year	2013
title	New Methods for the Rapid Prototyping of Architectural Models
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 397-403
doi	https://doi.org/10.52842/conf.ecaade.2013.2.397
wos	WOS:000340643600040
summary	Various Rapid Prototyping methods have been available for the production of physical architectural models for a few years. This paper highlights in particular the advantages of 3D printing for the production of detailed architectural models. In addition, the current challenges for the creation and transfer of data are explained. Furthermore, new methods are being developed in order to improve both the technical and economic boundary conditions for the application of 3DP. This makes the production of models with very detailed interior rooms possible. The internal details are made visible by dividing the complex overall model into individual models connected by means of an innovative plug-in system. Finally, two case studies are shown in which the developed methods are applied in order to implement detailed architectural models. Additional information about manufacturing time and costs of the architectural models in the two case studies is given.
keywords	Architectural model, CAAD, Rapid Prototyping, 3D printing, architectural detail.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2018_134
id	caadria2018_134
authors	Kawabe, Akihiro and Watanabe, Shun
year	2018
title	An Analysis of Mixed Land Use Toward Designing the Compact City
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 493-502
doi	https://doi.org/10.52842/conf.caadria.2018.2.493
summary	Applying the method of "Land-Use Mix" (Amindabari et al. (2013)) and Focusing on changes in highly mixed land use areas within an extensive survey area and detailed analytical unit, the analysis in this study revealed some trends of distribution of mixed land use areas and their declining patterns in the eastern part of Saitama Prefecture, Japan. For example, among the changing land use patterns of Highly-Mixed-Points-as-of-1994, the pattern that a decreasing mixture index was associated with increasing residential land and decreasing commercial land occurred most often, and the points that changed with that pattern accounted for about 32% of all the Highly Mixed Points, and about 51% of the decrease in mixture index points.
keywords	Metropolitan Form Analysis; Land-Use Mix; GIS; Mixed land use; Compact City
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2013_034
id	ecaade2013_034
authors	Kocaturk, Tuba and Kiviniemi, Arto
year	2013
title	Challenges of Integrating BIM in Architectural Education
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 465-473
doi	https://doi.org/10.52842/conf.ecaade.2013.2.465
wos	WOS:000340643600047
summary	This paper provides a critical overview of some of the fundamental issues regarding the adoption and integration of BIM – both as a method and as a technology – in Architectural education. It aims to establish a common ground for the rationale behind such integration and reflects on the past and present state of the cultural, intellectual, professional and technological context of Architecture. The paper will introduce the core issues to be considered in order to succeed in this challenging and transformational process. It will also introduce a framework for a gradual and progressive adoption of BIM and integrated design in the architectural curriculum.
keywords	Architectural education; BIM and integrated design; distributed cognition; integrated design studio.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia13_137
id	acadia13_137
authors	Kretzer, Manuel; In, Jessica; Letkemann, Joel; Jaskiewicz, Tomasz
year	2013
title	Resinance: A (Smart) Material Ecology
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 137-146
doi	https://doi.org/10.52842/conf.acadia.2013.137
summary	What if we had materials that weren’t solid and static like traditional building materials are? What if these materials could dynamically change and adapt to varying environmental situations and stimulations and evolve and learn over time? What if they were autonomous, self-sufficient and independent but could communicate with each other and exchange information? What would this “living matter” mean for architecture and the way we perceive the built environment? This paper looks briefly at current concepts and investigations in regards to programmable matter that occupy various areas of architectural research. It then goes into detail in describing the most recent smart material installation “Resinance” that was supervised by Manuel Kretzer and Benjamin Dillenburger and realized by the 2012/13 Master of Advanced Studies class as part of the materiability research at the Chair for CAAD, ETH Zürich in March 2013. The highly speculative sculpture links approaches in generative design, digital fabrication, physical/ubiquitous computing, distributed networks, swarm behavior and agent-based communication with bioinspiration and organic simulation in a responsive entity that reacts to user input and adapts its behavior over time.
keywords	Smart Materials; Distributed Networks; Digital Fabrication; Physical Computing; Responsive Environment
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:51

_id	ecaade2013_013
id	ecaade2013_013
authors	Lorenz, Wolfgang E.
year	2013
title	Combining Complexity and Harmony by the Box-Counting Method
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 667-676
doi	https://doi.org/10.52842/conf.ecaade.2013.2.667
wos	WOS:000340643600069
summary	When Benoît Mandelbrot raised the question about the length of Britain’s coastline in 1967, this was a major step towards formulating the theory of fractals, which also led to a new understanding of irregularity in nature. Since then it has become obvious that fractal geometry is more appropriate for describing complex forms than traditional Euclidean geometry (not only with regard to natural systems but also in architecture). This paper provides another view on architectural composition, following the utilization of fractal analysis. The procedure concerning the exploration of a façade design is demonstrated step by step on the Roman temple front of the Pantheon by Appolodorus and its re-interpretation – in the particular case the entrance front of Il Redentore, a Renaissance church by Palladio. Their level of complexity and range of scales that offer coherence are visualized by the specific measurement method of box-counting.
keywords	Fractal analysis; box-counting method; Pantheon; Il Redentore; Palladio.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2013_41
id	sigradi2013_41
authors	Luhan, Gregory A.; Robert Gregory
year	2013
title	Across Disciplines: Triggering Frame Awareness in Design Education
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 619 - 623
summary	Tacit knowledge is paradoxical: something we know yet don't know we know, knowledge we sense but can't articulate. In Polanyi’s definition of tacit knowledge, “we know more than we can say" (1966/2009; Scott, 1985; Gelwick, 1977). It's important to see that tacit knowledge is part of a sequence; mental structures, in awareness when first learned, eventually become tacit, operating thenceforth as unquestioned assumptions. These tacit structures pose a problem for professional education in disciplines that encourage creativity. This paper examines the design and re-design of an interdisciplinary course intended to help make these tacit structures visible, to trigger frame awareness.
keywords	Tacit knowledge; Design thinking; Sustainability; Systems thinking; Frame reflection
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	cf2013_149
id	cf2013_149
authors	McMeel, Dermott and Robert Amor
year	2013
title	Fabricate It, Paint It – And Don’t Wait up: Separating Fact from Fiction in Digitally Sponsored Fabrication
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 149-158.
summary	This paper offers perspectives on emerging trends in materiality and digital fabrication. It explores effects on communication practices and investigates how this changing materiality of data impacts collaboration and interoperability within design and making. Computer numerical controlled (CNC) routing and laser-cutting services are available in most major cities. Affordable kits for 3D printers, CNC routers and DIY KUKA robots are available across the Internet. A considerable part of the attraction of these tools is the ability to fabricate physical goods without detailed fabrication knowledge. We look at this phenomenon through two sets of examples, making furniture with a CNC router and making robots and tangibles with a 3D printer. In our examples it appears materiality remains an important factor throughout the process. We unpick these examples to shed light on how the technology impacts knowledge practices and ways of thinking during design and making.
keywords	Design, digital media, fabrication, 3D printing, CNC routing, materiality
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2015_161
id	ecaade2015_161
authors	Papasarantou, Chrissa; Kalaouzis, Giorgos, Pentazou, Ioulia and Bourdakis, Vassilis
year	2015
title	A Spatio-Temporal 3D Representation of a Historic Dataset
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 701-708
doi	https://doi.org/10.52842/conf.ecaade.2015.1.701
wos	WOS:000372317300076
summary	Previous research (Bourdakis et al, 2012; Papasarantou et al, 2013) dealt with the problem of creating information visualisation systems capable of combining historical data of MUCIV's database and developing strategies that embed the non-spatial data in spatial models. The database was primarily designed as an experimental flexible spatio-temporal configuration of dynamic visual structures generating a variety of narrations through interaction.The attempt of producing a legible configuration driven by a number of criteria, led to the proposition of two different arrangements, namely the linear and radial array. The aim of this paper is to present the next step on the visualization after redefining both the way that thematic axes and data are visualized and arranged/scattered. Alternate configurations are investigated, based also on theoretical analysis on the conceptualization and perception of information visualization systems (Card et al 1999, Ware, 2004).
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=74178dba-702a-11e5-aa5b-67bfe1e6502f
last changed	2022/06/07 08:00

_id	sigradi2013_31
id	sigradi2013_31
authors	Portillo, Juan Pablo
year	2013
title	BIM enclosures, una aplicación para cálculos térmicos en cerramientos [BIM Enclosures, an Application for Thermal Calculations in Enclosures]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 279 - 283
summary	The BIM software (Building Information Modeling) enables a holistic model -a complete description of the model-building for a complete analysis and validation prior to build, as well as the plotting of final design in architecture and its subsequent maintenance. Users can extend virtually unlimited capabilities. For this reason we have chosen a BIM with programmability by the user to create a calculation module to validate, the heat transfer and possible condensation on both walls and ceilings. The Revit Architecture BIM was chosen using the API (application programming interface) in C#. In this paper, we analyze the experience gained and the results achieved. The objective is to create a calculation and graphing module thermal transmission and condensation.
series	SIGRADI
email
last changed	2016/03/10 09:58

_id	caadria2019_342
id	caadria2019_342
authors	Qureshi, Cyrus, Moleta, Tane Jacob and Schnabel, Marc Aurel
year	2019
title	Beyond the portal - A Study of the Tangible and Intangible Rituals within Sacred Spaces
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 525-534
doi	https://doi.org/10.52842/conf.caadria.2019.1.525
summary	In its ambitions, the paper aims to propose a proof of concept for a Virtual, Augmented and Mixed (VAM) environment that digitally overlays a multifaith space in order to optimize their use, essentially transforming itself to the spiritual needs of the user. In order to do so, a mixed reality experience was developed by investigating and interpreting both the tangible and intangible rituals of prayer. By incorporating an immersive experience, the project promotes the idea of a multifaith space that moves beyond the notion of an "empty white room (Crompton, 2013, p.487)". To develop an immersive experience that caters to people of all religions or no religion is beyond the scope of this project. Hence, by creating a VAM environment for users of the Muslim faith the project may be able to support design ideologies for others, furthering research in this field.
keywords	Tangible and Intangible Rituals; Multifaith Space; Mixed Reality; Digital Mosque
series	CAADRIA
email
last changed	2022/06/07 08:00

For more results click below: