Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 835

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2024_167
id	ecaade2024_167
authors	Alammar, Ammar; Alymani, Abdulrahman; Jabi, Wassim
year	2024
title	Building Energy Efficiency Estimations with Random Forest for Single and Multi-Zones
doi	https://doi.org/10.52842/conf.ecaade.2024.2.365
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 2, pp. 365–374
summary	Surrogate models (SM) present an opportunity for rapid assessment of a building's performance, surpassing the pace of simulation-based methods. Setting up a simulation for a single concept involves defining numerous parameters, disrupting the architect's creative flow due to extended simulation run times. Therefore, this research explores integrating building energy analysis with advanced machine learning techniques to predict heating and cooling loads (KWh/m2) for single and multi-zones in buildings. To generate the dataset, the study adopts a parametric generative workflow, building upon Chou and Bui's (2014) methodology. This dataset encompasses multiple building forms, each with unique topological connections and attributes, ensuring a thorough analysis across varied building scenarios. These scenarios undergo thermal simulation to generate data for machine learning analysis. The study primarily utilizes Random Forest (RF) as a new technique to estimate the heating and cooling loads in buildings, a critical factor in building energy efficiency. Following that, A random search approach is utilized to optimize the hyperparameters, enhancing the robustness and accuracy of the machine learning models employed later in the research. The RF algorithms demonstrate high performance in predicting heating and cooling loads (KWh/m2), contributing to enhanced building energy efficiency. The study underscores the potential of machine learning in optimizing building designs for energy efficiency.
keywords	Heating and Cooling loads, Topology, Machine learning, Random Forest
series	eCAADe
email
last changed	2024/11/17 22:05

_id	ecaade2023_000
id	ecaade2023_000
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 1
doi	https://doi.org/10.52842/conf.ecaade.2023.1.001
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, 905 p.
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2023_001
id	ecaade2023_001
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 2
doi	https://doi.org/10.52842/conf.ecaade.2023.2.001
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, 899 p.
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
type	normal paper
email
last changed	2024/08/29 08:36

_id	acadia17_512
id	acadia17_512
authors	Rossi, Andrea; Tessmann, Oliver
year	2017
title	Collaborative Assembly of Digital Materials
doi	https://doi.org/10.52842/conf.acadia.2017.512
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 512- 521
summary	Current developments in design-to-production workflows aim to allow architects to quickly prototype designs that result from advanced design processes while also embedding the constraints imposed by selected fabrication equipment. However, the enduring physical separation between design space and fabrication space, together with a continuous approach to both design, via NURBs modeling software, and fabrication, through irreversible material processing methods, limit the possibilities to extend the advantages of a “digital” approach (Ward 2010), such as full editability and reversibility, to physical realizations. In response to such issues, this paper proposes a processto allow the concurrent design and fabrication of discrete structures in a collaborative process between human designer and a 6-axis robotic arm. This requires the development of design and materialization procedures for discrete aggregations, including the modeling of assembly constraints, as well as the establishment of a communication platform between human and machine actors. This intends to offer methods to increase the accessibility of discrete design methodologies, as well as to hint at possibilities for overcoming the division between design and manufacturing (Carpo 2011; Bard et al. 2014), thus allowing intuitive design decisions to be integrated directly within assembly processes (Johns 2014).
keywords	material and construction; construction/robotics; smart assembly/construction; generative system
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ecaade2014_021
id	ecaade2014_021
authors	Aant van der Zee, Bauke de Vries and Theo Salet
year	2014
title	From rapid prototyping to automated manufacturing
doi	https://doi.org/10.52842/conf.ecaade.2014.1.455
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 455-461
summary	In this paper we present an outline of a newly started project to develop a tool which connects BIM to a manufacturing technique like 3D printing. First we will look some promising manufacturing techniques. We will design a small dwelling and export it into a BIM, from which we will extract our data to generate the path the nozzle has to follow. The chosen path is constrained by the material properties, the design and speed of the nozzle. To validate the system we develop a small VR tool in which we mimic a manufacturing tool.
wos	WOS:000361384700045
keywords	Rapid prototyping; rapid manufacturing; robotics; automation; building information model (bim)
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2014_056
id	caadria2014_056
authors	Abdelhameed, Wael A.
year	2014
title	Creativity and VR Use
doi	https://doi.org/10.52842/conf.caadria.2014.719
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 719–728
summary	Creativity with its various processes is involved in all design actions. Creativity used in architectural design is different than creativity in other domains. However, creativity in general with its related cognition processes has no general theory. This research proposes certain activities of initial architectural design phases in which the role of activity is important. The research proceeds to present a case study of two architectural design studios in which a VR environment is employed in order to investigate the effect of VR use on the creativity in those initial design phases. The research applies a methodology of qualitative and quantitative analysis. Various architectural design factors are neutralized to overcome the influence generated from human factors variation and design thinking prejudice on architectural designing and the associated creativities.
keywords	Virtual Reality; Creativity; Architectural Design; Design Studio
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ijac201412407
id	ijac201412407
authors	Abdelmohsen, Sherif M.
year	2014
title	An Inquiry into Designing in Context using Generative Systems
source	International Journal of Architectural Computing vol. 12 - no. 4, 477-494
summary	The use of generative systems has been widely investigated in the architectural design process through different procedures and levels of autonomy to generate form.The digression from abstract pre- existing notions of vocabulary and rules – even when resulting in emergent forms – to address complex real- world contexts is yet a challenging undertaking.This paper explores incorporating context in the process of designing using generative systems from ideation to fabrication, and explores the relationship between the emergent nature of generative design and the situated act of designing while using generative design tools.A course offered for 3rd year architecture students at the Department of Architecture, Ain Shams University, Egypt, was designed for this purpose. 110 students employed systems including shape grammars, L- systems, fractals and cellular automata, to design and fabricate 8 group projects.A discussion around emergence and situatedness is presented, with special attention to the designing process from ideation to fabrication.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2016_048
id	ecaade2016_048
authors	Abramovic, Vasilija and Achten, Henri
year	2016
title	From Moving Cube to Urban Interactive Structures - A case study
doi	https://doi.org/10.52842/conf.ecaade.2016.1.661
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 661-668
summary	When thinking about the future vision of a city, having in mind recent development in digital technologies and digital design tools we are inclined to expect new building structures which incorporate this technology to better help us manage the complexity of life, and to simplify our daily lives and tasks. The idea behind this research paper lies in design of such structures, which could be put inside an urban context and engage in creating a built environment that can add more to the quality of life. For us Interactive architecture is architecture that is responsive, flexible, changing, always moving and adapting to the needs of today. The world is becoming more dynamic, society is constantly changing and the new needs it develops need to be accommodated. As a result architecture has to follow. Spaces have to become more adaptive, responsive and nature concerned, while having the ability for metamorphosis, flexibility and interactivity. Taken as a starting point of this idea is a specific module from graduation project in 2014 "The Unexpected city", where it was possible to test out first ideas about interactive and flexible objects in an urban environment.
wos	WOS:000402063700071
keywords	Flexible architecture; Interactive architecture; Responsive systems
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2014_014
id	ascaad2014_014
authors	Abuelmaatti, Aisha A.; Vian S. Ahmed and Heveine S. Baban
year	2014
title	Collaborative Environments in Small and Medium-sized Enterprises in Architecture, Engineering and Construction
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 183-193
summary	The general picture of Architecture Engineering and Construction (AEC) is of a sector that is a pyramid with control being in the hands of large players with a large base of Small and Medium Enterprises (SMEs). It ensues naturally that SMEs are key players in supporting the large companies. This suggests that, the AEC sector has a continuous demand for collaboration. Collaborative working has been implemented in numerous companies. These efforts have resulted in the wide recognition of the opportunity that emerging technologies offer the AEC sector. It is, however, commonly observed that SMEs are likely to magnify the sector trend and to be less technically forward thinking than large companies. The main focus of this paper is, therefore, to explore the use of IT within AEC, and the barriers and different implementation factors that can influence SMEs to develop, in response to business pressures using the opportunities provided by collaborative technologies.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	acadia14_479
id	acadia14_479
authors	Achten, Henri
year	2014
title	One and Many: An Agent Perspective on Interactive Architecture
doi	https://doi.org/10.52842/conf.acadia.2014.479
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 479-486
summary	Agent theory from Distributed Artificial Intelligence can form a strong theoretical foundation for the conception and following the design of interactive architecture. New concepts are introduced: style of interaction and attitude. For design support they can be unified under the notion of intentionality.
keywords	Interactive Architecture, Interaction Style, Building Attitude, Multi Agent Systems in Design
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
doi	https://doi.org/10.52842/conf.acadia.2021.530
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	ecaade2014_036
id	ecaade2014_036
authors	Afonso Maria de Castro Fernandes Abreu Gonçalves
year	2014
title	A Grammar for Shelters - An exploration of rule-based designs in prefabricated and modular shelters.
doi	https://doi.org/10.52842/conf.ecaade.2014.2.327
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 327-336
summary	This work explores the possible use of the shape grammar formalism in generating small/medium sized dwellings or shelters as a possible and effective solution for shelter shortages that usually follows in the wake of a natural disaster. The shelters are generated using a set of pre-fabricated elements that add up to form a coherent and functional dwelling. The grammar exemplified here, being a shape grammar, deals specially with generating the underlying functional diagram and the floor plan of one possible solution based on a set of typologies design a priori.
wos	WOS:000361385100034
keywords	Shape grammars; modular architecture; emergency architecture
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2014_075
id	sigradi2014_075
authors	Afsari, Kereshmeh; Chuck Eastman
year	2014
title	Categorization of building product models in BIM Content Library portals
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay- Montevideo 12,13,14 November 2014, pp. 370-374
summary	BIM Content Libraries are performing as online sources for building product models. In order to effectively use the product models, it is important to organize them systematically within these databases. But currently there is no standard or guideline for this purpose. Products in these libraries are being categorized based on different criteria such as the object classes in the target platform, by referring to multiple classification systems or based on customized categories. This paper studies some of the BIM Content Libraries and investigates the structure that each library is using for product categorization. It indicates the need for a generic framework for the purpose of product categorization in BIM Content Libraries.
keywords	BIM objects; Product models; Building models; BIM Content Library; Product category
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2014_004
id	ascaad2014_004
authors	Afsari, Kereshmeh; Matthew E. Swarts and T. Russell Gentry
year	2014
title	Integrated Generative Technique for Interactive Design of Brickworks
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 49-64
summary	Bricks have been used in the construction industry as a building medium for millennia. Distinct patterns of bricks depict the unique aesthetic intentions found in Roman, Gothic and Islamic architecture. In contemporary practice, the use of digital tools in design has enabled methodologies for creating new forms in architecture. CAD and BIM systems provide new opportunities for designers to create parametric objects for building form generation. In masonry design, there exists an inherent contradiction between traditional patterns in brick design, which are formal and prescribed, and the potential for new patterns generated using design scripting. In addition, current tools do not provide interactive techniques for the design of brickwork patterns that can manage constant changes parametrically, to inform and influence design process, by providing design feedback on the constructive and structural aspects of the proposed brick pattern and geometry. This research looks into the parametric techniques that can be applied to create different kinds of patterns on brick walls. It discusses a methodology for an interactive brickwork design within generative techniques. By integrating data between two computational platforms – the first based on image analysis and the second on parametric modeling, we demonstrate a methodology and application that can generate interactive arbitrary patterns and map it to the brick wall in real-time.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ecaade2015_18
id	ecaade2015_18
authors	Agkathidis, Asterios
year	2015
title	Generative Design Methods - Implementing Computational Techniques in Undergraduate Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.2015.2.047
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 47-55
summary	In continuation to the Deceptive Landscape Installation research project (Agkathidis, Kocatürk 2014), this paper investigates the implementation of generative design techniques in undergraduate architectural design education. After reviewing the main definitions of generative design synoptically, we have assessed the application of a modified generative method on a final year, undergraduate design studio, in order to evaluate its potential and its suitability within the framework of a research led design studio, leading to an RIBA accredited Part I degree. Our research findings based on analysis of the design outputs, student performance, external examiners reports as well as student course evaluation surveys indicate a positive outcome on the studio's design approach, as well as its suitability for an undergraduate design studio. They initiate a flourishing debate about accomplishments and failures of a design methodology, which still remains alien to many undergraduate curricula.
wos	WOS:000372316000007
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=e6f673d4-6e8e-11e5-be22-93874392c2e4
last changed	2022/06/07 07:54

_id	acadia14_267
id	acadia14_267
authors	Ahlquist, Sean
year	2014
title	Post-forming Composite Morphologies: Materialization and design methods for inducing form through textile material behavior
doi	https://doi.org/10.52842/conf.acadia.2014.267
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 267-276
summary	This paper presents research in developing materials with integrated pre-stressed textile and rigid composite properties. Such a material system, termed Pre-stressed Textile-Reinforced Composites (pTRC), produces forms with great degrees of both 3-dimensional and structural differentiation, from flat form-work in combination with a curated composite forming process.
keywords	Pre-stressed Textile-reinforced Composites, Textile Hybrid, Material Behavior, Form-finding, Spring-based Simulation.Category: Material Logics and Tectonics.
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	ecaade2014_086
id	ecaade2014_086
authors	Ahmed Sarhan and Peter Rutherford
year	2014
title	Integrating Sustainability in the Architectural Design Education Process - Taxonomy of Challenges and Guidelines
doi	https://doi.org/10.52842/conf.ecaade.2014.1.323
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 323-332
summary	The last decade have seen substantial calls and increasing pressure for developing an integrated design teaching framework, where sustainability is an imperative priority. This paper focuses on presenting a taxonomy of the main challenges encountered within the educational domain, in the attempt to reach an effective integration. The paper also presents a set guidelines to address and try to resolve the noted challenges. As the use of Building Performance Simulation (BPS) applications is a central approach in this process aiming to reach energy efficient buildings, the paper focuses on the shortcomings noted as a result of the use of these applications in the design studios, with particular emphasis on the thermal and lighting aspects of the simulation. The taxonomy presented is a summary of the findings from literature review, as well as the surveys results which were part of the author's research project discussed in the paper.
wos	WOS:000361384700032
keywords	Environmental design; building performance simulation; architectural design education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2014_055
id	ecaade2014_055
authors	Ahmet Emre Dincer, Gülen Cagdas and Hakan Tong
year	2014
title	A Digital Tool for Customized Mass Housing Design
doi	https://doi.org/10.52842/conf.ecaade.2014.1.201
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 201-211
summary	Innovative design approaches are needed for mass housing implementations. Especially increasing interaction between user and designer is major important in the design decisions of these buildings. For this, it is seriously necessary to benefit from technological advances in computational designs, because digital tools like shape grammar, cellular automata, genetic algorithm, l-systems and agent-based models in this field provide not only to save time and to manage the relationships but also to generate many different alternatives. Accordingly, a digital support tool for designers has been developed by using cellular automata approach and scripts of 3Ds Max software. It produces samples of housing design plans which is generated by cellular automata approach according to the data of users' preferences. In this paper the interface and contributions of the developed model are introduced and discussed.
wos	WOS:000361384700020
keywords	Computational design; mass customization; innovative housing design; plugin
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia14projects_87
id	acadia14projects_87
authors	Ahrens, Chandler; Sprecher, Aaron; Neuman, Eran
year	2014
title	WHITEOUT: Topological evolution of embedded geometries
doi	https://doi.org/10.52842/conf.acadia.2014.087
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 87-90
summary	Whiteout documents the design, fabrication and installation of a full scale prototype using a predictive mesh relaxation algorithm while the physical construct made from white spandex fabric, steel tube, wood members and aluminum connectors verifies the virtual assumptions.
keywords	Material Logics and Tectonics
series	ACADIA
type	Research Projects
email
last changed	2022/06/07 07:54

_id	ascaad2014_026
id	ascaad2014_026
authors	Al-Barqawi, Wadia
year	2014
title	Virtual Reality: an approach for building Makkah’s architectural identity
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 331-342
summary	This paper explores a new approach in the architectural design process aiming to construct Makkah's architectural identity. Makkah, which is a city of unique sacred values, has been losing its battle to preserve it heritage buildings. Traditional districts with their heritage buildings have been cleared in order to construct skyscrapers to accommodate the increasing number of pilgrims. While some argue for preserving heritage buildings others insist in building more skyscrapers. Within these conflicting views, architects and urban designers use CAD software to document heritage buildings without informing the future architectural design process. This paper argues for adopting digital architecture as an approach for preserving the architectural heritage of Makkah by studying heritage buildings as systems that can be digitally represented in virtual world. This goes beyond the physical representation of heritage artefacts to investigate in depth the logic that guide the design process. The roushan, which is one of the unique heritage artefacts in Makkan's architecture can be an interface between reality and the virtual environment in the design process. This goes behind modeling the roushan, to employ the principle of virtual representation in the design process. The digital representation of heritage becomes the realm for research transforming the virtual into reality. The hope is to produce an architecture that is related to its local heritage, contemporary in design and responsive to its environment, as well as to advocate principles, references and techniques at the core of the design process, in an educational and professional context. In broader picture the goal is to achieve a city that is responsive to human activities adapted to changes, sustainable in physical forms and social relations and above all unique in design and identity.
series	ASCAAD
email
last changed	2016/02/15 13:09

For more results click below: