Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2082

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2015_324
id	ecaade2015_324
authors	Abdelmohsen, Sherif and Massoud, Passaint
year	2015
title	Integrating Responsive and Kinetic Systems in the Design Studio: A Pedagogical Framework
doi	https://doi.org/10.52842/conf.ecaade.2015.2.071
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 71-80
summary	Responsive architecture is one of the growing areas of computational design that is not getting adequate attention in CAAD curricula. A pedagogical approach to designing responsive systems requires more than the typical knowledge, tools or skill sets in architectural design studios. This paper presents a framework for integrating responsive and kinetic systems in the architectural design studio. The framework builds on findings of two design studios conducted at The American University in Cairo, Egypt. In both studios, students were asked to design elements of responsive architecture that work towards the development of their projects. The paper demonstrates the process and outcomes of both studios. It then demonstrates how concepts of integrated project delivery are incorporated to propose a framework that engages students in designing, fabricating and operating responsive systems in different phases of the design process. A discussion follows regarding dynamics of design studio in light of the proposed framework.
wos	WOS:000372316000010
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=7e59e026-6e8f-11e5-9e59-876225eebea0
last changed	2022/06/07 07:54

_id	ecaade2015_138
id	ecaade2015_138
authors	Achten, Henri
year	2015
title	Closing the Loop for Interactive Architecture - Internet of Things, Cloud Computing, and Wearables
doi	https://doi.org/10.52842/conf.ecaade.2015.2.623
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 623-632
summary	Interactive architecture occurs in buildings when part of the building engages in exchange of information with the user, in such a way that the interactive system adjusts it's assumptions about the user's needs and desires. Acquiring the user's needs and desires is no trivial task. Currently there are no techniques that will reliably make such assertions. Building a system that unobtrusively monitors the inhabitant seems to be a tall order, and making the system ask the user all the time is very distracting for the user. An alternative option has become available however: personal wearables are increasingly monitoring the user. Therefore it suffices that the interactive system of the building gets in touch with those wearables, rather than duplicating the sensing function of the wearables. The enabling technology for wearables is Internet of Things, which connects physical objects (smart objects) on a virtual level, and Cloud Computing, which provides a scalable storage environment for wearables and smart objects. In this paper we outline the implications of the convergence of these three technologies in the light of interactive architecture.
wos	WOS:000372316000069
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=fdd9e706-6e8f-11e5-b1d4-00190f04dc4c
last changed	2022/06/07 07:54

_id	ecaade2015_280
id	ecaade2015_280
authors	Adilenidou, Yota
year	2015
title	Error as Optimization - Using Cellular Automata Systems to Introduce Bias in Aggregation Models through Multigrids
doi	https://doi.org/10.52842/conf.ecaade.2015.2.601
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 601-610
summary	This paper is focusing on the idea of error as the origin of difference in form but also as the path and the necessity for optimization. It describes the use of Cellular Automata (CA) for a series of structural and formal elements, whose proliferation is guided through sets of differential grids (multigrids) and leads to the buildup of big span structures and edifices as, for example, a cathedral. Starting from the error as the main idea/tool for optimization, taxonomies of morphological errors occur and at a next step, they are informed with contextual elements to produce an architectural system. A toolbox is composed that can be implemented in different scales and environmental parameters, providing variation, optimization, complexity and detail density. Different sets of experiments were created starting from linear structural elements and continuing to space dividers and larger surface components.
wos	WOS:000372316000067
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=5cf73be0-6e8f-11e5-b7a4-1b188b87ef84
last changed	2022/06/07 07:54

_id	ecaade2015_122
id	ecaade2015_122
authors	Agirbas, Asli
year	2015
title	The Use of Digital Fabrication as a Sketching Tool in the Architectural Design Process - A Case Study
doi	https://doi.org/10.52842/conf.ecaade.2015.2.319
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 319-324
summary	Computer-aided manufacturing (CAM) technologies including computer numerically controlled (CNC) milling, laser cutting and 3D printing are becoming cheaper and globally more accessible. Accordingly, many design professionals, academics and students have been able to experience the benefits and challenges of using digital fabrication in their designs. The use of digital fabrication in the education of architecture students has become normal in many schools of architecture, and there is a growing demand for computer-aided manufacturing (CAM) logic and fabrication knowledge in student learning. Clearly, architecture students are acquiring material base-thinking, time management, production methods and various software skills through this digital fabrication. However, it appears to be the case that architecture students use digital fabrication mainly in the final stage of their design or in their finishing work. In this study, computer-aided manufacturing (CAM) technologies have been used as a sketch tool rather than simply for fabricating a final product in the architectural design process and the advantages of this educational practice are demonstrated.
wos	WOS:000372316000037
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=79005d78-6fe6-11e5-b555-13a7f78815dc
last changed	2022/06/07 07:54

_id	ecaade2015_18
id	ecaade2015_18
authors	Agkathidis, Asterios
year	2015
title	Generative Design Methods - Implementing Computational Techniques in Undergraduate Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.2015.2.047
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 47-55
summary	In continuation to the Deceptive Landscape Installation research project (Agkathidis, Kocatürk 2014), this paper investigates the implementation of generative design techniques in undergraduate architectural design education. After reviewing the main definitions of generative design synoptically, we have assessed the application of a modified generative method on a final year, undergraduate design studio, in order to evaluate its potential and its suitability within the framework of a research led design studio, leading to an RIBA accredited Part I degree. Our research findings based on analysis of the design outputs, student performance, external examiners reports as well as student course evaluation surveys indicate a positive outcome on the studio's design approach, as well as its suitability for an undergraduate design studio. They initiate a flourishing debate about accomplishments and failures of a design methodology, which still remains alien to many undergraduate curricula.
wos	WOS:000372316000007
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=e6f673d4-6e8e-11e5-be22-93874392c2e4
last changed	2022/06/07 07:54

_id	ecaade2015_278
id	ecaade2015_278
authors	Aguiar, Rita and Gonçalves, Afonso
year	2015
title	Programming for Architecture: The Students’ Point of View
doi	https://doi.org/10.52842/conf.ecaade.2015.2.159
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 159-168
summary	The following paper presents a reflection on computational design education in Architecture schools. For approaching this subject, the specific case of the Programming for Architecture course taught at Instituto Superior Técnico - Universty of Lisbon is presented and analyzed through the students' point of view. The aim of the course is to focus on representation methods through programming, introducing the fundamentals of computational approach to architectural design. We will explain and discuss the subject teaching methods, the structure of the course and the school environment. Also we will express the students' opinion regarding the class organization, the contents of the program and the usefulness of programming, as well as suggestions for an improved strategy for teaching computational methods to Architecture students.
wos	WOS:000372316000020
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=833a3bb0-6f78-11e5-9635-174d5ee09923
last changed	2022/06/07 07:54

_id	ecaade2015_235
id	ecaade2015_235
authors	Ahmar, Salma El and Fioravanti, Antonio
year	2015
title	Biomimetic-Computational Design for Double Facades in Hot Climates - A Porous Folded Façade for Office Buildings
doi	https://doi.org/10.52842/conf.ecaade.2015.2.687
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 687-696
summary	Biomimetic design is an approach that is gaining momentum among architects and designers. Computational design and performance simulation software represent powerful tools that help in applying biomimetic ideas in architectural design and in understanding how such proposals would behave. This paper addresses the challenge of reducing cooling loads while trying to maintain daylight needs of office buildings in hot climatic regions. Specifically, it focuses on double skin facades whose application in hot climates is somewhat controversial. Ideas from nature serve as inspiration in designing a porous, folded double façade for an existing building, aiming at increasing heat lost by convection in the façade cavity as well as reducing heat gained by radiation. The cooling loads and daylight autonomy of an office room are compared before and after the proposed design to evaluate its performance.
wos	WOS:000372316000076
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=f87306fc-6e90-11e5-845a-00190f04dc4c
last changed	2022/06/07 07:54

_id	ecaade2015_246
id	ecaade2015_246
authors	Andraos, Sebastian
year	2015
title	DMR: A Semantic Robotic Control Language
doi	https://doi.org/10.52842/conf.ecaade.2015.2.261
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 261-268
summary	DMR is a semantic robot-control language that attempts to change our relationship with machines and create true human-robot collaboration through intuitive interfacing. To this end, DMR is demonstrated in the DMR Interface, an Android app, which accepts semantic vocal commands as well as containing a GUI for feedback and verification. This app is combined with a robot-mounted 3D camera to enable robotic interaction with the surroundings or compensate for unpredictable environments. This combination of tools gives users access to adaptive automation whereby a robot is no longer given explicit instructions but instead is given a job to do and will adapt its movements to execute this regardless of any slight changes to the goal or environment. The major advantages of this system come in the vagueness of the instructions given and a constant feedback of task accomplishment, approaching the manner in which we subconsciously control our bodies or would guide another person to achieve a goal.
wos	WOS:000372316000031
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=1d9c3f50-6fe2-11e5-8742-0b2879594625
last changed	2022/06/07 07:54

_id	ecaade2015_87
id	ecaade2015_87
authors	Angelova, Desislava; Dierichs, Karola and Menges, Achim
year	2015
title	Graded Light in Aggregate Structures - Modulating the daylight in designed granular systems using online controlled robotic processes
doi	https://doi.org/10.52842/conf.ecaade.2015.2.399
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 399-406
summary	The research project proposes an online-controlled robotic process that allows for grading light in aggregate structures using photometric analysis. It investigates the potential of designing specific daylight qualities through the behaviour-based robotic fabrication of the aggregate system. Two key methods are developed: the digital fabrication of the structure and a photometric analysis technique which is used as a sensor input for the robotic sensory interface. In its first part, the paper presents a series of photometric experiments on aggregate wall- and dome-structures. In its second part, the focus is laid on robotic manufacturing of these aggregate structures and the interactive fabrication of specific light conditions. To conclude further areas of research into emergent design processes with aggregates are outlined.
wos	WOS:000372316000046
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=4161e07e-6fe8-11e5-baaf-1fc96b3e1b94
last changed	2022/06/07 07:54

_id	ecaade2015_27
id	ecaade2015_27
authors	Asanowicz, Aleksander
year	2015
title	Museum 2.0 - Implementation of 3D Digital Tools
doi	https://doi.org/10.52842/conf.ecaade.2015.1.709
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 709-715
summary	The aim of this work is to try to set out how new technologies can influence the perception of a museum exposition. The problem which will be analysed is how to adapt an exhibition to the needs of visually impaired people. The problem will be considered on the basis of the case studies which were the part of an agreement between the Army museum in Bialystok and our Faculty. In traditional museums the main principle is the prohibition of touching exhibits.The project goal was to help blind people understand the features of the environment around them through the sense of touch. The novelty of this work is the study of how new digital technologies may improve the perception for the visually impaired.In the paper the method of 3D scanning, modelling and 3D printing will be presented. In conclusion the encountered problems and plans for further action will be discussed.
wos	WOS:000372317300077
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=8e079058-702a-11e5-8ac3-d3d5c9e6f5fe
last changed	2022/06/07 07:54

_id	ecaade2015_130
id	ecaade2015_130
authors	Asl, Mohammad Rahmani; Stoupine, Alexander, Zarrinmehr, Saied and Yan, Wei
year	2015
title	Optimo: A BIM-based Multi-Objective Optimization Tool Utilizing Visual Programming for High Performance Building Design
doi	https://doi.org/10.52842/conf.ecaade.2015.1.673
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 673-682
summary	Within the architecture, engineering, and construction (AEC) industry, the application of multidisciplinary optimization methods has been shown to reach significant improvements in building performance compared to conventional design methods. As a result, the use of multidisciplinary optimization in the process of design is growing and becoming a common method that provides desired performance feedback for decision making. However, there is a lack of BIM-based multidisciplinary optimization tools that use the rich information stored in Building Information Models (BIM) to help designers explore design alternatives across multiple competing design criteria. In this paper we introduce Optimo, an open-source visual programming-based Multi-Objective Optimization (MOO) tool, which is developed to parametrically interact with Autodesk Revit for BIM-based optimization. The paper details the development process of Optimo and also provides the initial validation of its results using optimization test functions. Finally, strengths, limitations, current adoption by academia and industry, and future improvements of Optimo for building performance optimization are discussed.
wos	WOS:000372317300073
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2015_333
id	ecaade2015_333
authors	Baerlecken, Daniel and Gokmen, Sabri
year	2015
title	Osteotectonics - Trabecular Bone Structures and Their Adaptation for Customized Structural Nodes Using Additive Manufacturing Techniques
doi	https://doi.org/10.52842/conf.ecaade.2015.2.439
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 439-448
summary	This paper discusses an approach to adapting trabecular bone structures for the design of complex architectural components exemplified through structural nodes. Based on the paradigm shift in additive fabrication, namely the ability to print structural metals, this paper identifies new methods for architectural and structural design that allow to create porous, intricate architectural components. Those components are designed in analogy to bone structures. The paper presents a metaball-based application, programmed in Processing, which allows creating n-legged nodes using parametric gradient maps. The approach aims at reduction of weight and waste, while exploring the novel aesthetic properties of such bio-constructed networks.
wos	WOS:000372316000050
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=b1066644-70d7-11e5-b019-7f01fe8cb7bc
last changed	2022/06/07 07:54

_id	ecaade2015_215
id	ecaade2015_215
authors	Balakrishnan, Bimal and Oprean, Danielle
year	2015
title	Communication, Coordination and Collaboration: Media affordances and Team Performance in a Collaborative Design Environment
doi	https://doi.org/10.52842/conf.ecaade.2015.2.225
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 225-232
summary	Advances in digital media are encouraging designers to adopt digital tools during early stages of design ideation as well as to facilitate collaboration in design teams. Collaborative environments for design teams should take into consideration both the multimodal nature of design representation as well as the complexity of team cognition. Collaborative tools that take a “black-box” approach often limit affordances for design ideation and collaboration. We describe here a collaborative environment that we put together using a kit-of-parts approach and underlying theoretical considerations. We also describe systematic usability evaluation of the collaborative environment by constraining select media affordances and qualitatively examining the impact on a team's design process. Preliminary findings were used to improve the environment and lay the groundwork for developing tele-collaborative environments.
wos	WOS:000372316000027
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=d219f772-6e90-11e5-b69a-00190f04dc4c
last changed	2022/06/07 07:54

_id	ecaade2015_279
id	ecaade2015_279
authors	Baquero, Pablo, Giannopoulou, Effimia and Cavazos, Jaime
year	2015
title	Strategies for Metallic Vault Structures - Aluminium Composite Panels Used as Structural Elements
doi	https://doi.org/10.52842/conf.ecaade.2015.2.169
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 169-176
summary	This article explains parametric, fabrication and teaching strategies used during a workshop for constructing a full scale, self supporting, vault metal structure realized with parametric manufacturing methods. The key aim is to construct a small size, easy assembled and transportable pavilion, while focusing on new design and construction methods of a façade system in which the structure, joint and skin will integrate functions in a unifying structural system. For the investigation, we explore materials commonly used in façade industry, such as aluminum profiles and aluminium composite panels (ACP).
wos	WOS:000372316000021
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2015_222
id	ecaade2015_222
authors	Barczik, Guenter
year	2015
title	Differentiated Continuity and Mutual Support - How Intersecting and Unrolling Operations, Made Manageable through CAD, Facilitate Richer and More Effective Spatial Articulations
doi	https://doi.org/10.52842/conf.ecaade.2015.1.389
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 389-393
summary	The two geometric operations of intersecting shapes with one another and unfolding complex shapes into flat patterns have through CAD software been changed from challenge to triviality. Thus, combinations of shapes that have eluded designers for the difficulty of their handling are now at the hands of everybody who is able to use common CAD packages. We investigate what this can mean for architectural design.
wos	WOS:000372317300042
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=a6fef7a2-7022-11e5-abe6-338fd23b59eb
last changed	2022/06/07 07:54

_id	ecaade2015_74
id	ecaade2015_74
authors	Bard, Joshua D.; Blackwood, David, Sekhar, Nidhi and Smith, Brian
year	2015
title	Decorative Robotic Plastering - A Case Study of Real-Time Human Machine-Collaboration in High-Skill Domains
doi	https://doi.org/10.52842/conf.ecaade.2015.2.383
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 383-388
summary	This paper explores hybrid digital / physical workflows in the building trades, a high-skill domain where human dexterity and craft can be augmented by the precision and repeatability of digital design and fabrication tools. In particular the paper highlights a project where historic techniques of decorative plastering are extended through live motion capture of a drawing implement, information rich visualization projected in the space of fabrication, and custom robotic tooling to generate free-form running moulds. This workflow allows designers and craftspeople to quickly explore patterns through free-hand sketch, test ideas with shaded previews, and seamlessly produce physical parts using robotic collaborators.
wos	WOS:000372316000044
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2015_3.394
id	sigradi2015_3.394
authors	Bastiani, Jamile De; Pupo, Regiane T.
year	2015
title	Materialize to inform and educate
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 161-166.
summary	The protection and preservation of historical heritage are important tasks for all walks of life because rebuilding the exclusionary social memory, symbolically representing the nation’s identity. From this reflection, the problem arises of how to make the people appreciate the historic buildings. The Region of Medium High Uruguay, will serve as pilot study on a method of applying to the enhancement of national heritage by the population that is through the materialization of form. It is with the help of computer modeling combined with digital prototyping that seeks to find effective alternatives that use new technologies in the upgrading of historic buildings, a form of knowledge, integration and collaboration. In many areas of knowledge, consciousness makes the human being is connected to the world through all the senses. And touch, as experimentation and understanding of space it inhabits, may be the most overlooked sense in recent informatization times. In this research, the new realization techniques used to attempt to leverage awareness and understanding of a heritage, for a population hitherto alien to the cultural and historical values of a local architecture.
keywords	Materialize, Inform, Aware, Appreciation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2015_293
id	ecaade2015_293
authors	Batliner, Curime; Newsum, MichaelJake and Rehm, M.Casey
year	2015
title	Live: Synchronous Computing in Robot Driven Design
doi	https://doi.org/10.52842/conf.ecaade.2015.2.277
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 277-286
summary	Challenging our contemporary understanding of representation and simulation in architecture SCI-Arc has been developing a unique digital/physical design platform where the relationships between humans, machines and matter are constantly in flux re-calibrating, reshuffling, reordering aligning digital and physical and vis versa. The robot as a technology takes an important role in these new ideation environments. “Live” is an applicaton which enables real-time robotic control and grants the robot substantial agency situating it as an interactive design tool that immediately responds to designed signal and sensor inputs in its environment. Current research explores interactive environments, gesture based human-machine interactions and autonomous agent driven design programs.
wos	WOS:000372316000033
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=6fff29ba-6fe7-11e5-a661-eb66006fc007
last changed	2022/06/07 07:54

_id	ecaade2015_77
id	ecaade2015_77
authors	Bialkowski, Sebastian and Kepczynska-Walczak, Anetta
year	2015
title	Engineering Tools Applied in Architecture - Challenges of Topology Optimization Implementation
doi	https://doi.org/10.52842/conf.ecaade.2015.1.261
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 261-268
summary	Computation, in the context of a digital designing process, is redefining architectural practice. Architects are developing new sets of tools which are dramatically changing the typical way of design procedure. The paper describes the research assumptions, problems and solutions proposition, aimed at creation of a real-time form finding tool for architects based on engineering methods. Through intersecting architectural form evaluation with engineering analysis and optimisation tools it is highly intended to offer the opportunity to variety of architects and designers to use the exceedingly complex and compound process for their design improvement. The form finding tool, to be effective and reliable, has to provide immediate feedback to a designer. This requirement enforces a software developer to use more sophisticated solutions. The paper focuses on possibilities of already known engineering procedures acceleration such as Finite Element Method or Topology Optimization for effective implementation in architectural design process.
wos	WOS:000372317300028
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=1337360e-702e-11e5-90b6-cbdace47c7fb
last changed	2022/06/07 07:52

_id	ecaade2015_116
id	ecaade2015_116
authors	Bieg, Kory
year	2015
title	SUPRAFICIAL: Building (an) Information Network
doi	https://doi.org/10.52842/conf.ecaade.2015.1.277
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 277-284
summary	This paper explores the potential of using multiple software programs to generate an adaptable, cross-platform Building Information Network to unlock new territories of form-making and design. By using multiple software packages to overcome the limitations imposed by current BIM (Building Information Model) programs and mono-scalar design approaches, we can design a buildings form, envelope, and materiality through an adaptable, parametric design process that uses the best features of each software program, allows non-computational input to inform form, and takes advantage of a designer's unique self-expression.
wos	WOS:000372317300030
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=40efae5a-702e-11e5-83aa-771f3575946f
last changed	2022/06/07 07:52

For more results click below: