Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 4544

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2020_043
id	caadria2020_043
authors	Bai, Nan, Nourian, Pirouz, Xie, Anping and Pereira Roders, Ana
year	2020
title	Towards a Finer Heritage Management - Evaluating the Tourism Carrying Capacity using an Agent-Based Model
doi	https://doi.org/10.52842/conf.caadria.2020.1.305
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 305-314
summary	As one of the most important areas in the Palace Museum, Beijing, China, the Hall of Mental Cultivation had suffered from overcrowding of visitors before it was closed in 2016 for conservation. Preparing for the reopening in 2020, the Palace Museum decided to take the chance and initiate finer-grained tourism management in the Hall. This research intends to provide an audio-guided touring program by dynamically evaluating the Tourism Carrying Capacity (TCC) with the highlight spots in the Hall, to operate the touring program spatiotemporally. Framing an optimization problem for the touring program, an agent-based simulator, Thunderhead Pathfinder, originally developed for evacuation in the emergency, is utilized to verify the performance of the touring system. The simulation shows that the proposed touring program could precisely fit all the key requirements to improve the visitors' experience, to guarantee heritage safety, and to ensure more efficient management.
keywords	Tourism Carrying Capacity; Agent-Based Simulation; Operations Research; Heritage Management
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2016_210
id	ecaade2016_210
authors	Abdelmohsen, Sherif, Massoud, Passaint and Elshafei, Ahmed
year	2016
title	Using Tensegrity and Folding to Generate Soft Responsive Architectural Skins
doi	https://doi.org/10.52842/conf.ecaade.2016.1.529
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 529-536
summary	This paper describes the process of designing a prototype for a soft responsive system for a kinetic building facade. The prototype uses lightweight materials and mechanisms to generate a building facade skin that is both soft (less dependent on hard mechanical systems) and responsive (dynamically and simultaneously adapting to spatial and environmental conditions). By combining concepts stemming from both tensegrity structures and folding mechanisms, we develop a prototype that changes dynamically to produce varying facade patterns and perforations based on sensor-network data and feedback. We use radiation sensors and shape memory alloys to control the prototype mechanism and allow for the required parametric adaptation. Based on the data from the radiation sensors, the lengths of the shape memory alloys are altered using electric wires and are parametrically linked to the input data. The transformation in the resulting overall surface is directly linked to the desired levels of daylighting and solar exposure. We conclude with directions for future research, including full scale testing, advanced simulation, and multi-objective optimization.
wos	WOS:000402063700058
keywords	Soft responsive systems; tensegrity; folding; kinetic facades
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_048
id	ecaade2016_048
authors	Abramovic, Vasilija and Achten, Henri
year	2016
title	From Moving Cube to Urban Interactive Structures - A case study
doi	https://doi.org/10.52842/conf.ecaade.2016.1.661
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 661-668
summary	When thinking about the future vision of a city, having in mind recent development in digital technologies and digital design tools we are inclined to expect new building structures which incorporate this technology to better help us manage the complexity of life, and to simplify our daily lives and tasks. The idea behind this research paper lies in design of such structures, which could be put inside an urban context and engage in creating a built environment that can add more to the quality of life. For us Interactive architecture is architecture that is responsive, flexible, changing, always moving and adapting to the needs of today. The world is becoming more dynamic, society is constantly changing and the new needs it develops need to be accommodated. As a result architecture has to follow. Spaces have to become more adaptive, responsive and nature concerned, while having the ability for metamorphosis, flexibility and interactivity. Taken as a starting point of this idea is a specific module from graduation project in 2014 "The Unexpected city", where it was possible to test out first ideas about interactive and flexible objects in an urban environment.
wos	WOS:000402063700071
keywords	Flexible architecture; Interactive architecture; Responsive systems
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_026
id	ecaade2016_026
authors	Agkathidis, Asterios
year	2016
title	Implementing Biomorphic Design - Design Methods in Undergraduate Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.2016.1.291
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 291-298
summary	In continuation to Generative Design Methods, this paper investigates the implementation of Biomorphic Design, supported by computational techniques in undergraduate, architectural studio education. After reviewing the main definitions of biomorphism, organicism and biomimicry synoptically, we will assess the application of a modified biomorphic method on a final year, undergraduate design studio, in order to evaluate its potential and its suitability within the framework of a research led design studio, leading to an RIBA accredited Part I degree. Our research findings based on analysis of design outputs, student performance as well as moderators and external examiners reports initiate a constructive debate about accomplishments and failures of a design methodology which still remains alien to many undergraduate curricula.
wos	WOS:000402063700033
keywords	CAAD Education; Strategies, Shape Form and Geometry; Generative Design; Design Concepts
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_ws-folding
id	ecaade2016_ws-folding
authors	Akleman, Ergun, Kalantar, Negar and Borhani, Alireza
year	2016
title	Folding The Unfoldable - A Method For Constructing Complex-Curved Geometry With Quad Edge Panels
doi	https://doi.org/10.52842/conf.ecaade.2016.1.069
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 69-72
summary	This paper explains a method will be used during a workshop for constructing complex-curved geometry with quad edge panels. In this workshop, we demonstrate that quad-edge mesh data structure can efficiently be used to construct complex large shapes. With hands-on experiments, we will show a vast variety of shapes can be constructed using square, rectangular, parallelogram and extruded-line shaped panels. In addition, using a system we have recently developed to unfold polygonal mesh, we will demonstrate how desired shapes can be constructed by using laser-cut quadrilateral panels. This approach is particularly suitable to construct complicated sculptural and architectural shapes from anisotropic materials that can only be bended in one direction.
wos	WOS:000402063700007
keywords	Shape Modeling; Physical Construction; Complex-Curved Geometry; Digital Fabrication
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_063
id	ecaade2016_063
authors	Al-Qattan, Emad, Galanter, Philip and Yan, Wei
year	2016
title	Developing a Tangible User Interface for Parametric and BIM Applications Using Physical Computing Systems.
doi	https://doi.org/10.52842/conf.ecaade.2016.2.621
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 621-630
summary	This paper discusses the development of an interactive and a responsive Tangible User-Interface (TUI) for parametric and Building Information Modeling (BIM) applications. The prototypes presented in this paper utilizes physical computing systems to establish a flexible and intuitive method to engage digital design processes.The prototypes are hybrid UIs that consist of a digital modeling tool and an artifact. The artifact consists of a control system (sensors, actuators, and microcontrollers) and physical objects (architectural elements). The link between both environments associates physical objects with their digital design information to assist users in the digital design process. The integration of physical computing systems will enable the objects to physically respond to analog input and provide real-time feedback to users. The research aims to foster tangible computing methods to extend the capabilities of digital design tools. The prototypes demonstrate a method that allows architects to simultaneously interact with complex architectural systems digitally and physically.
wos	WOS:000402064400063
keywords	Physical Computing; Parametric Design; BIM; Tangible UI
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2021_151
id	ascaad2021_151
authors	Allam, Samar; Soha El Gohary, Maha El Gohary
year	2021
title	Surface Shape Grammar Morphology to Optimize Daylighting in Mixed-Use Building Skin
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 479-492
summary	Building Performance simulation is escalating towards design optimization worldwide utilizing computational and advanced tools. Egypt has its plan and agenda to adopt new technologies to mitigate energy consumption through various sectors. Energy consumption includes electricity, crude oil, it encompasses renewable and non-renewable energy consumption. Egypt Electricity (EE) consumption by sector percentages is residential (47%), industrial (25%) and commercial (12%), with the remainder used by government, agriculture, public lighting and public utilities (4%). Electricity building consumption has many divisions includes HVAC systems, lighting, Computers and Electronics and others. Lighting share of electricity consumption can vary from 11 to 15 percent in mixed buildings as in our case study which definitely less that the amount used for HVAC loads. This research aims at utilizing shape morphogenesis on facades using geometric shape grammar to enhance daylighting while blocking longwave radiations causing heat stress. Mixed-use building operates in daytime more than night which emphasizes the objective of this study. Results evaluation is referenced to LEED v4.1 and ASHRAE 90.1-2016 window-to-wall ratio calibration and massive wall description. Geometric morphogenesis relies on three main parameters; Pattern (Geometry Shape Grammar: R1, R2, and R3), a reference surface to map from, and a target surface to map to which is the south-western façade of the case study. Enhancing Geo-morph rule is to guarantee flexibility due to the rotation of sun path annually with different azimuth and altitude angles and follow LEED V4.1 enhancements of opaque wall percent for building envelope.
series	ASCAAD
email
last changed	2021/08/09 13:13

_id	ecaade2016_017
id	ecaade2016_017
authors	Androutsopoulou, Eirini
year	2016
title	Autopoietic Features of the Urban Body's Elements - Similarity studies on network elements' attributes
doi	https://doi.org/10.52842/conf.ecaade.2016.2.071
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 71-78
summary	The methodology presented in this paper is grounded on the analysis and relational relocation of attributes of the urban body, deriving from the reconstruction of the urban body as a network configuration. In contrast to the hierarchical constructions, network constructions allow for multiple connections between elements, therefore being closer to the complexity of the associative forces found in the structure of the urban body.Similarity function is applied in an attempt to restructure those attributes of the urban body which emerge from the position of each element (node) in relation to other elements of the network and not from the Cartesian topology. Being able to represent material elements as nodes, counter-bodies deriving from autopoietic -network functions emerge, allowing for an inquiry in what concerns the autopoietic features of the urban body in general, focusing on the application of autopoietic functions which generate the urban body parts and components and on the multiplicity of elements' structure, in terms of association of crowds of elements and sets of attributes' values, aiming at the redefinition of proximity as similarity and of remoteness as difference.
wos	WOS:000402064400006
keywords	Similarity; Autopoiesis; urban body; Attributes; network; complex systems
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2021_203
id	ecaade2021_203
authors	Arora, Hardik, Bielski, Jessica, Eisenstadt, Viktor, Langenhan, Christoph, Ziegler, Christoph, Althoff, Klaus-Dieter and Dengel, Andreas
year	2021
title	Consistency Checker - An automatic constraint-based evaluator for housing spatial configurations
doi	https://doi.org/10.52842/conf.ecaade.2021.2.351
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 351-358
summary	The gradual rise of artificial intelligence (AI) and its increasing visibility among many research disciplines affected Computer-Aided Architectural Design (CAAD). Architectural deep learning (DL) approaches are being developed and published on a regular basis, such as retrieval (Sharma et al. 2017) or design style manipulation (Newton 2019; Silvestre et al. 2016). However, there seems to be no method to evaluate highly constrained spatial configurations for specific architectural domains (such as housing or office buildings) based on basic architectural principles and everyday practices. This paper introduces an automatic constraint-based consistency checker to evaluate the coherency of semantic spatial configurations of housing construction using a small set of design principles to evaluate our DL approaches. The consistency checker informs about the overall performance of a spatial configuration followed by whether it is open/closed and the constraints it didn't satisfy. This paper deals with the relation of spaces processed as mathematically formalized graphs contrary to existing model checking software like Solibri.
keywords	model checking, building information modeling, deep learning, data quality
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_028
id	ecaade2016_028
authors	Asanowicz, Aleksander
year	2016
title	Digital Architectural Composition - 30 years of experience and experimentation
doi	https://doi.org/10.52842/conf.ecaade.2016.1.195
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 195-203
summary	In this paper the evolution of architectural composition teaching will be presented and discussed. The main point of these deliberations is to consider how digital methods and technologies have influenced the teaching methods and the understanding of compositional rules/principles by students. Another important factor which will be analysed, is the difficulties faced by teachers in the evaluation of students' work. The paper is divided into four parts, each of which concerns different approaches to architectural composition teaching. In the first part the historical background of architectural composition teaching is presented. In the second part traditional teaching methods is described, the third concerns teaching of digital architectural composition, and the fourth - digital architectural composition in virtual space. At the end of each section, the advantages and disadvantages of the discussed methods are presented. These disadvantages were a stimulus for changes in the teaching process, which was enabled thanks to the development of digital technologies (software and hardware) during the last 20 years. The last part of the paper will be devoted to the presentation of potential directions of development of architectural composition teaching methods.Please write your abstract here by clicking this paragraph.
wos	WOS:000402063700022
keywords	Architectural Composition; digital modelling; Virtual Reality
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_058
id	ecaade2016_058
authors	Aschwanden, Gideon
year	2016
title	Big Data for Urban Design - The impact of centrality measures on business success
doi	https://doi.org/10.52842/conf.ecaade.2016.2.457
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 457-462
summary	This paper investigates the role of spatial parameters in relation to the economic dynamic embedded in the urban fabric. The key element explored in this study is the role of the urban configuration and accessibility on the success of different business sectors in Switzerland.The underlying hypothesis is that economic markets are constant forces of change influencing the development of cities and functions on all scales. Markets are institutions that reduce people's choices based on a myriad of factors to a single number, the price. Accessibility is a resource for each business that yields multiple values of benefits and transactions in terms of economic properties. This project explores the interaction of multiple measures of accessibility, calculated by Space Syntax analysis, with the success of different markets represented by employment by business sector. 828548 business locations and 44 spatial measures were used to derive associations between them. The results show that the measure of 'Choice' correlates highly for smaller radii and 'Integration' for larger radii with the total number of jobs. The result also shows each sector has a specific set of accessibility measures that allows them to thrive.
wos	WOS:000402064400045
keywords	Big Data; Centrality; Economy; Accessibility; Urban Design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_077
id	ecaade2016_077
authors	Aºut, Serdar and Meijer, Winfried
year	2016
title	FlexiMold: Teaching Numeric Control through a Hybrid Device
doi	https://doi.org/10.52842/conf.ecaade.2016.1.321
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 321-328
summary	This proceeding presents the process and outputs of a collaborative workshop which was held between Yaºar University in Turkey and Delft University of Technology in the Netherlands. The aim of the workshop was to observe the educational potentials of a custom-made formwork device towards teaching CAD/CAM to architecture students. This flexible formwork, which we call FlexiMold, is a hybrid device that is used manually by following computerized numeric information. The students designed an architectural object which has a complex shape and used this formwork to fabricate it in actual scale. We present the workshop objectives, process and outcomes in this proceeding.
wos	WOS:000402063700036
keywords	CAAD Education; Human-Numeric Control; Flexible Formwork; Double-Curved Surfaces
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_228
id	ecaade2016_228
authors	Balaban, Ozgun and Tuncer, Bige
year	2016
title	Visualizing Urban Sports Movement
doi	https://doi.org/10.52842/conf.ecaade.2016.2.089
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 89-94
summary	In this study, a visualization tool that maps outdoor physical activity such as runs on a map by specifying time, location, activity, gender, age group, etc. is created. This tool reveals the usage patterns of streets within a city for outdoor physical activity. This tool is created within a larger research project that investigates the influence of streets on the leisure walking activity within cities. For this purpose, the tool is capable of presenting the collected multi-modal data that includes personal fitness data, weather data, spatial data, and crime data. Moreover, the tool creates new analysis capabilities such as displaying usage of streets by urban joggers. The research project in which this tool will be used is aimed for designers/planners to improve streets for 'runnability'.
wos	WOS:000402064400008
keywords	Sports Activity; Big Data; Urban Visualization; Fitness Applications
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_280
id	ecaade2017_280
authors	Baldissara, Matteo, Perna, Valerio, Saggio, Antonino and Stancato, Gabriele
year	2017
title	Plug-In Design - Reactivating the Cities with responsive Micro-Architectures. The Reciprocal Experience
doi	https://doi.org/10.52842/conf.ecaade.2017.2.571
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 571-580
summary	Every city has under utilized spaces that create a series of serious negative effects. Waiting for major interventions, those spaces can be reactivated and revitalized with soft temporary projects: micro interventions that light up the attention, give new meaning and add a new reading to abandoned spaces. We can call this kind of operations "plug-in design", inheriting the term from computer architecture: interventions which aim to involve the citizens and activate the environment, engage multiple catalyst processes and civil actions. Plug-in design interventions are by all meanings experimental, they seek for interaction with the users, locally and globally. Information Technology - with its parametric and site-specific capabilities and interactive features - can be instrumental to create such designs and generate a new consciousness of the existing environment. With this paper we will illustrate how two low-budget interventions have re-activated a forgotten public space. Parametric design with a specific script allowing site-specific design, materials and structure optimization and a series of interactive features, will be presented through Reciprocal 1.0 and Reciprocal 2.0 projects which have been built in 2016 in Italy by the nITro group.
keywords	reciprocal frame; parametric design; responsive technology; plug-in design; interactivity; re-activate
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_ws-intelligent
id	ecaade2016_ws-intelligent
authors	Baquero, Pablo, Montas, Nelson and Giannopoulou, Effimia
year	2016
title	Transformational Intelligent Systems - Parametric Simulation Workshop
doi	https://doi.org/10.52842/conf.ecaade.2016.1.073
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 73-76
summary	This workshop intends to propose a specific kinetic design application, to define an architectural component and to simulate Shape Memory Alloy material behavior. The objective of the workshop is to simulate the experiment before the fabrication, itself aimed to model and anticipate the application's physical behavior traits as a means to preview assembly.
wos	WOS:000402063700008
keywords	digital simulation; muscle wires; programmable matter; responsive components; kinetic architectural systems
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_055
id	ecaade2016_055
authors	Baranovskaya, Yuliya, Prado, Marshall, Dörstelmann, Moritz and Menges, Achim
year	2016
title	Knitflatable Architecture - Pneumatically Activated Preprogrammed Knitted Textiles
doi	https://doi.org/10.52842/conf.ecaade.2016.1.571
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 571-580
summary	Textiles are widely used in architecture for tensile structures, as they are lightweight and can easily span large distances. These structures typically require an external framework for a support. Inflatable structures are self-supporting but are limited to relatively simple forms or require complex and predetermined cut patterns. The development of an adaptive and programmable textile system with an integrative method for pneumatic activation would create a novel self-supporting structure with high degree of design and architectural potential. This creates a highly integrative hybrid system where the generic pneumatic membranes are constrained by the differentiated knitted textile skin that is stretched in several directions under air pressure. This allows for an innovative, lightweight, easily transportable design, where the preprogrammed knitting pattern defines the structure, geometry and formation, activated under pneumatic pressure.
wos	WOS:000402063700062
keywords	programming textiles; binary textiles; analogue computing; air inflation; grading textile properties
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2023_508
id	sigradi2023_508
authors	Barber, Gabriela and Lafluf, Marcos
year	2023
title	Videomapping laboratory. Systematization of experiences 2016-2022
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 843–854
summary	This article synthesizes the result of a systematization and analysis of videomapping carried out in “Laboratorio de Visualización Digital Avanzada” in the period 2014-2022, taking as a source the information collected in the investigation "(Lafluf, 2020), it is updated by integrating new experiences and new interpretations. Likewise, the article aims to provide a structured way to describe and analyze videomapping projects, keeping in mind three axes: context project, mapping project, and mapping event. These categories refer to a strategy developed within the methodological framework of the master's thesis "Videomapping en los proyectos del Laboratorio de Visualización Digital Avanzada de la Facultad de Arquitectura Diseno y Urbanismo (Udelar). Caso de estudio: Videomapping Patrimonio Anglo" (Lafluf, 2020) as well as in other investigations to describe the videomapping. Once this set of videomapping projects has been presented, general considerations are made to analyze the surveyed cases.
keywords	New Media Art, video mapping, New Media, Architecture, Projection Mapping
series	SIGraDi
email
last changed	2024/03/08 14:07

_id	ecaade2016_150
id	ecaade2016_150
authors	Barczik, Günter and Kruse, Rolf
year	2016
title	Shifting Design Work from Production to Evaluation - An Evolutive Design Tool
doi	https://doi.org/10.52842/conf.ecaade.2016.2.109
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 109-115
summary	We are developing an evolutive design tool that seeks to facilitate a shift in the focus of the process of designing architecture: away from the production of design alternatives or options towards an evaluation of semi-automatically generated ones. We work towards outsourcing the production of design alternatives in a given design task to a CAD tool and thereby give human designers more time to evaluate and discuss those alternatives and guide the tool in the production of improved alternatives. The format of our work is an experimental student design and research project where architects and computer scientists collaborate. Though the project is in a very early stage, our aim is to ultimately shift the focus of human designers' involvement from production of design options to the evaluation of those, in order to give humans more time to think, discuss, find, analyze and include many different points of view and make it easier for them to be impartial in finding optimal solutions. We developed a design tool that uses interactive evolutionary algorithms to support exploration of design options.
wos	WOS:000402064400010
keywords	Genetic Algorithm; Evolutive Design Strategy; Interactive evolutionary computation
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_105
id	ecaade2016_105
authors	Bialkowski, Sebastian and Kepczynska-Walczak, Anetta
year	2016
title	IT Driven Architectural Design for All?
doi	https://doi.org/10.52842/conf.ecaade.2016.1.283
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 283-290
summary	This paper discusses teaching parametric design as a supportive method of introducing design logic. Two case studies have been described, analysed and concluded. The first case study focuses on a workshop based design of a parametric pavilion, which resulted of building 1:1 scale object. The second case study concentrates on the academic compulsory course providing parametric design knowledge based on a particular topic imposed by tutors. In both cases the main purpose was to get students being accustomed to a different way of thinking, to open their minds to new approaches to design process and to demonstrate a connection between programming skills and imagination capabilities. Each of the cases returned valuable guidelines for design studio pedagogy which has also been revealed in this paper.
wos	WOS:000402063700032
keywords	design logic; parametric; design pedagogy
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:52

_id	ecaade2016_098
id	ecaade2016_098
authors	Bia³kowski, Sebastian
year	2016
title	Structural Optimisation Methods as a New Toolset for Architects
doi	https://doi.org/10.52842/conf.ecaade.2016.2.255
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 255-264
summary	The paper focuses on possibilities of already known engineering procedures such as Finite Element Method or Topology Optimisation for effective implementation in architectural design process. The existing attempts of complex engineering algorithms implementation, as a form finding approach will be discussed. The review of architectural approaches utilising engineering methods will be supplemented by the author's own solution for that particular problem. By intersecting architectural form evaluation with engineering analysis complemented by optimisation algorithms, the new quality of contemporary architecture design process may appears.
wos	WOS:000402064400025
keywords	topology optimization; design support tools; complex geometries; finite element method; CUDA
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: