Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 16662

Reformat results as: short short into frame detailed detailed into frame

_id	c9dc
authors	Avron, Barr and Feigenbaum, Edward A. (editors)
year	1981
title	The Handbook of Artificial Intelligence
source	xiv, 409 p. Stanford, California: HeurisTech Press., 1981. vol. 1 of 3: includes bibliography p.[365]-388 and indexes
summary	Part 1 of a three volume set that contains some 200 articles on AI. Volume 1 discusses the goals of AI research, the history of the field and the current active areas of research. It explains how the book is organized, and the literature of the field. How to access journal articles and technical reports for further reading
keywords	AI
series	CADline
last changed	2003/06/02 13:58

_id	caadria2023_73
id	caadria2023_73
authors	Awaji, Hiroki, Hayashi, Sei and Gondo, Tomoyuki
year	2023
title	Construction of a Free-Form Pavilion Using On-Site Plywood Bending With the Development of Fabrication Tools
doi	https://doi.org/10.52842/conf.caadria.2023.2.099
source	Immanuel Koh, Dagmar Reinhardt, Mohammed Makki, Mona Khakhar, Nic Bao (eds.), HUMAN-CENTRIC - Proceedings of the 28th CAADRIA Conference, Ahmedabad, 18-24 March 2023, pp. 99–108
summary	Buildings with complex shapes are increasingly being constructed using digital fabrication tools. However, many building components nevertheless require specialised skills for their assembly at the construction site, even if the manufacturing has been streamlined. In this study, by practising an agile design process that repeats the method of ‘Add-on the tool’ and ‘feedback on form and material, we devised a construction method that allows unskilled workers to be involved in the fabrication of pavilions and the creation of complex curved surfaces without requiring special skills, so long as the rules of assembly are determined. In this study, a method of achieving large curvatures using wire bending of Y-shaped wooden units made of 4-mm thick lauan veneer boards was proposed, in which large curvatures were used to design two-dimensionally curved surfaces with continuous wavy shapes. This method was also used to control the force applied to the wires by controlling their lengths. The free curved surface with the elastic bending of the plywood allowed a height of 2.3 m and a span of 6 m.
keywords	Add-on the tools, Agile development, Large-span Structure, Active Bending, Plywood, Curvature, Fabrication Tools
series	CAADRIA
email
last changed	2023/06/15 23:14

_id	ascaad2022_043
id	ascaad2022_043
authors	Awan, Abeeha; Prokop, Simon; Vele, Jiri; Dounas, Theodor; Lombardi, Davide; Agkathidis, Asterios; Kurilla, Lukas
year	2022
title	Qualitative Knowledge Graph for the Evaluation of Metaverse(s) - Is the Metaverse Hype or a Promising New Field for Architects?
source	Hybrid Spaces of the Metaverse - Architecture in the Age of the Metaverse: Opportunities and Potentials [10th ASCAAD Conference Proceedings] Debbieh (Lebanon) [Virtual Conference] 12-13 October 2022, pp. 99-116
summary	With the advancement of augmented and virtual reality technologies both in scale as well as accessibility, the Metaverse (Stephenson, 1992, Hughes, 2022) has emerged as a new digital space with potential for the application of architectural creativity and design. With blockchain integration, the concept of the Metaverse shows promise in creating a “decentralised” space for design and creativity with rewards for its participants. As a platform that incorporates these technological components, does the Metaverse have utility for architectural design? Is there something truly novel in what the Metaverse brings to architectural computing, and architectural design? The paper constructs a qualitative knowledge graph that can be used for the evaluation of various kinds of Metaverses in and for architectural design. We use Design Science Research methods to develop the knowledge graph and its evaluative capacity, stemming from our experience with two Metaverses, Decentraland and Cryptovoxels. The paper concludes with a discussion of knowledge and practice gaps that are evident, framing the opportunities that architects might have in the future in terms of developing Metaverse(s).
series	ASCAAD
email
last changed	2024/02/16 13:24

_id	8ae8
authors	Ayala, D., P. Brunet and Juan (et al)
year	1985
title	Object Representation by Means of Nominimal Division Quadtrees and Octrees
source	ACM Transactions on Graphics. January, 1985. vol. 4: pp. 41-59 : ill. includes bibliography
summary	Quadtree representation of two-dimensional objects is performed with a tree that describes the recursive subdivision of the more complex parts of a picture until the desired resolution is reached. At the end, all the leaves of the tree are square cells that lie completely inside or outside the object. There are two great disadvantages in the use of quadtrees as a representation scheme for objects in geometric modeling system: The amount of memory required for polygonal objects is too great, and it is difficult to recompute the boundary representation of the object after some Boolean operations have been performed. In the present paper a new class of quadtrees, in which nodes may contain zero or one edge, is introduced. By using these quadtrees, storage requirements are reduced and it is possible to obtain the exact backward conversion to boundary representation. Algorithms for the generation of the quadtree, boolean operation, and recomputation of the boundary representation are presented, and their complexities in time and space are discussed. Three- dimensional algorithms working on octrees are also presented. Their use in the geometric modeling of three-dimensional polyhedral objects is discussed
keywords	geometric modeling, algorithms, octree, quadtree, curves, curved surfaces, boolean operations
series	CADline
last changed	2003/06/02 13:58

_id	cf2015_486
id	cf2015_486
authors	Aydin, Asli and Özkar, Mine
year	2015
title	Material computability of indeterminate plaster behavior
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 486.
summary	In this study, we revisit the concepts of abstraction and materialization with regards to the theoretical framework of new materialism. Underlining the changing relationship between design through abstraction (DtA) and design through materialization (DtM) in design history, we propose an integration of the two towards achieving design emergence. Additional to a theoretical framework, we provide a showcase through material experiments of plaster and abstractions in the form of shape computation. We discuss results as parameters for future digital implementations and potentials for design practice and education.
keywords	Shape computation, new materialism.
series	CAAD Futures
type	normal paper
email
last changed	2015/06/29 09:30

_id	ecaade2023_421
id	ecaade2023_421
authors	Aydin, Serdar, ªik, Büºra, Yörük, Merve ªule and Aktaº, Begüm
year	2023
title	Assessment of Correlative Digital Drawing Features in the Design Processes of Unstructured Creativity
doi	https://doi.org/10.52842/conf.ecaade.2023.1.231
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 231–240
summary	This research critically challenges the conventional perception of drawings as mere technical blueprints and delves into the intricate integration of design ideation, abstraction, and speculation with geometrical manipulations and semantic labelling. By focusing on unconventional architectural design studio experiments at the undergraduate level, the study aims to explore the role of creativity in speculative drawing. It adopts a 3- dimensional design thinking process that transcends the rigid constraints of traditional drawings and embraces the fluidity of representational norms. Furthermore, the paper elucidates on the pedagogical aspects of the design studio, including the unstructured creativity inherent in the design process. The methodology employed in this study is exemplified through different stages of the design studio, incorporating a variety of representations such as 2D, 2.5D, and 3D,encompassing scalar, geometric, and material transfigurations. To assess the outcomes of the studio, the research utilises correlation diagrams that establish connections between digital drawing features at different stages and the unstructured creativity manifested in the final design. These scatter and correlation diagrams capture the syntactic relationships between the objects within digital drawings. The findings of this study reveals insight on the nuanced interplay between intuitive, reflective, and retrospective aspects of unstructured creativity during the design ideation process. By unraveling the intricate role of digital design tools and methods this research contributes to a deeper understanding of of how design ideation is generated and manifested through the dynamic interplay of the modulating compounds of drawing objects. It highlights the significance of meaningful, conceptual, and speculative representations that directly relate to the creation of buildable forms and architectural spaces. Through its critical insights, this study paves the way for advancements in the field of CAAD and offers valuable perspective for architectural education and practice.
keywords	Digital design, Correlation, Intuitive Design, Speculative Architectural Drawing
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ddss9405
id	ddss9405
authors	Ayeni, Bola
year	1994
title	The Design of Decision Support Systems in Urban and Regional Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Planning methodology over the years, has shifted from situations whereby planners think, plan and design for the people to one whereby both people and planners have become important components of the planning process. Consequently, the important urban planning methodology of the last two decades that utilized mathematical models in the planning process is fast becoming obsolete. The paper argues that model building should move to the creation of urban decision support systems for the planning process through the development of expert systems shells that interfaces existing planning models with the knowledge content of planning and planners. The expert system shells as the set of decision rules for determining how existing supply and demand relationships are applied for modelling land use and transportation would be responsible forguiding the development of appropriate geographical information systems, supporting land use and other models in a coordinated manner, for communicating with these other systems componentsand for guiding interactions between them and the user. Furthermore, decision support systems should be designed to bring the whole of the knowledge base to bear on a problem through a flexible and adaptive solution system that makes explicit use of both the analysts models and the decision makers expert knowledge. It is argued that this understanding leads to the development of three crucial issues for the design of decision support systems in urban and regional planning;namely the development of user friendly integrated urban land-use transportation models, the development of expert geographical information systems and the development of expert systemshells for many of the routine tasks planners deal with.
series	DDSS
last changed	2003/08/07 16:36

_id	ecaade2017_101
id	ecaade2017_101
authors	Ayoub, Mohammed and Wissa, Magdi
year	2017
title	Daylight Optimization - A Parametric Study of Urban Façades Design within Hybrid Settlements in Hot-Desert Climate
doi	https://doi.org/10.52842/conf.ecaade.2017.2.193
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 193-202
summary	Unprecedented growth of hybrid settlements causes deterioration to the indoor environmental quality. Due to their narrow street-networks and fully packed urban fabric, lower floors are subjected to severe overshadow condition, which has adverse effects on the health of the inhabitants. This paper aims to investigate techniques to mitigate the under-lit indoor environment for a group of buildings with variable heights and orientations, with regard to the urban façades parameters. It reflects an intervention in an existing hybrid settlements, within hot-desert climate, to alter façades configurations for daylight optimization, and ultimately recover the lost indoor quality of users in such contexts.
keywords	Daylight Optimization; Urban Façade; Simulation; Hybrid Settlements ; Parametric Design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia23_v3_129
id	acadia23_v3_129
authors	Ayres, Phil
year	2023
title	Sensitive Scaffolds – Cultivating Spatio-temporal Dialogues with Living Complexes
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	Thank you to the ACADIA team for extending the invitation to come here. For me, it's a really fantastic moment to reconnect with the ACADIA community. I've been dipping in and out of it since -- I think my first ACADIA was in Savannah, Georgia. Does anyone remember what year that was? 2001? 2002? I've been dipping in and out. And I really see this community as a model. You know, we could talk about the Mississippi and how it meanders, and passages of energy and matter and information begin to change. And the ACADIA community meanders across these different territories, but somehow it maintains its particular identity. And that identity, I think, is shrouded within ideals of sharing -- knowledge sharing -- and within a kind of creative design research, you know, rigor, which I find really fascinating.
series	ACADIA
type	keynote
email
last changed	2024/04/17 13:59

_id	27d2
authors	Ayrle, Hartmut
year	1991
title	Computers for Architects - Only a Tool?
doi	https://doi.org/10.52842/conf.ecaade.1991.x.i9j
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
summary	The paper states that, as a result of the schism between architecture as art and engineering as rationalism, the architectural community underestimates the computer as tool with a potential to substantially enlarge the possibilities of building design. It is claimed that the computer could serve as coordination tool for the ruptured design process, as a virtual workbench where all design disciplines sit together and develop their designs in enhanced conscience of what the whole design demands. The paper then concludes, that to develop such software tools, architects must participate in the development of software and may no longer be restricted to the role of applicants, especially during their universitary instruction. The corresponding research and training facilities at the University of Karlsruhe, Faculty of Architecture are described.
series	eCAADe
last changed	2022/06/07 07:50

_id	ecaadesigradi2019_340
id	ecaadesigradi2019_340
authors	Azambuja Varela, Pedro and Sousa, José Pedro
year	2019
title	Digital Expansion of Stereotomy - A semantic classification
doi	https://doi.org/10.52842/conf.ecaade.2019.1.387
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 387-396
summary	This paper presents a critical analysis and reflection on stereotomy with the purpose of updating its theoretical discourse. Having risen to the apex of architecture technological possibilities in the 17th century, stereotomic construction lost its importance in favour of iron, steel and other materials and construction techniques brought by the Industrial Revolution. More recently, much owing to the possibilities offered by digital technologies, a resurgence of interest in the subject has spawned various researches which bring stereotomy back to the architectural discourse. Although technological applications and design innovations in service of stereotomy have developed in multiple interesting paths, there is a lack of a common theory on the subject which is capable of relating these multiple apparently diverging stereotomic approaches between each other and, maybe even more importantly, to the classical practice which sparked the development this discipline. The research presented in this paper shows how the digital tools were instrumental in bringing this tradition to architecture contemporaneity and how a current stereotomy is largely supported by these technologies, while keeping strong relations to its classic origin.
keywords	stereotomy; classification; history; digital
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	ecaade2021_222
id	ecaade2021_222
authors	Azambuja Varela, Pedro, Sousa, José Pedro and Silva Dias, Joana
year	2021
title	Drawing-to-Factory Process - Using freehand drawing to drive robotic assembly of brick walls
doi	https://doi.org/10.52842/conf.ecaade.2021.1.189
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 1, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 189-194
summary	The developments of digital technology applied to architecture in the recent decades has allowed for direct communication from the studio to fabrication. However, this process is typically dependent on complicated computational processes, enlarging the distance from the benefits of the traditional drawing approaches employed by architects. This research intends to explore possibilities of reenacting the drawing as a means of computational generative design which feeds automated systems of construction. By using a Cobot directed by an algorithm which reads a simple drawn curve on paper, an automated brick wall is built, as demonstrated in two exhibitions. This mixed approach allows for technology in architectural design and construction to be more accessible to a wider audience, while blurring the boundaries between concept and materialization.
keywords	robotic assembly; human-robot collaboration; non-standard structures; digital fabrication; computational design; interactive fabrication
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia22_128
id	acadia22_128
authors	Azel, Nicolas; Pachuca, Brandon; Wilson, Lucien
year	2022
title	Closing the Gap
source	ACADIA 2022: Hybrids and Haecceities [Proceedings of the 42nd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. University of Pennsylvania Stuart Weitzman School of Design. 27-29 October 2022. edited by M. Akbarzadeh, D. Aviv, H. Jamelle, and R. Stuart-Smith. 128-137.
summary	This paper shares KPF Cloud Tools, a platform for using Rhino Compute (McNeel’s REST API for RhinoCommon and Grasshopper) to run a library of Grasshopper tools through a cloud server via a Rhino plugin with a procedurally generated user interface, making it quick to deploy new tools (Robert McNeel & Associates 2010). We describe the professional challenges that the KPF Cloud Tools platform solves, document the technical implementation of the platform, and illustrate its benefit through the impact on a large architectural practice.
series	ACADIA
type	paper
email
last changed	2024/02/06 14:00

_id	sigradi2011_290
id	sigradi2011_290
authors	Azevedo de Oliveira, Fabiana Mabel
year	2011
title	Redes sociotécnicas: a concepção de uma interface [Sociotechnical network: design of an interface]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 568-570
summary	This paper aims to examine the forms of representation of the processes of creation of Web interfaces for platforms. Its origin is associated with a proposal that understands the new communications technologies, specifically the Internet, and the possibility of formation of a sociotechnical network, as a tool to expand the ways of social interaction (Egler, 2007). Increasing access to information and communication, making the process more open, redefining the relationships and social exchanges, and allowing its mediation by digital processes.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	architectural_intelligence2024_35
id	architectural_intelligence2024_35
authors	Azuka Odiah & Samuel D. Gosling
year	2024
title	Laying the foundations for using generative AI images in architectural research: do images convey the intended spaces and ambiances?
doi	https://doi.org/https://doi.org/10.1007/s44223-024-00076-x
source	Architectural Intelligence Journal
summary	The advent of Generative Artificial Intelligence (GenAI) models, such as Stable Diffusion, Open AI's DALL-E2, and MidJourney, has opened the door to a huge range of new possibilities in architectural research and practice. Before architects and researchers can fully leverage these models, it is crucial to assess their proficiency in generating images that accurately depict real spaces and ambiances. Here, we assessed the proficiency of DALL-E2 in depicting intended spaces and intended ambiances, using real photographs from Google Images as a comparative benchmark. Images of eighteen distinct home spaces, each intended to evoke three different ambiances, were generated and presented to human observers. The images were evaluated in terms of their perceived realism, their accuracy in depicting the space and ambiance intended. Findings highlight GenAI's capability in depicting spaces and point to its potential in convincingly conveying ambiances. Beyond the substantive findings, this research highlights the importance of evaluating the rapidly emerging tools enabled by recent developments in AI.
series	Architectural Intelligence
email
last changed	2025/01/09 15:05

_id	ecaade2018_309
id	ecaade2018_309
authors	Aºut, Serdar, Eigenraam, Peter and Christidi, Nikoletta
year	2018
title	Re-flex: Responsive Flexible Mold for Computer Aided Intuitive Design and Materialization
doi	https://doi.org/10.52842/conf.ecaade.2018.1.717
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 717-726
summary	The paper presents an ongoing research about the design and a possible use of a responsive flexible mold. The mold is developed by integrating its precedents with automation and Human-Computer Interaction (HCI). The objective of the design is to provide an immersive design tool which has direct link to fabrication. It allows intuitive interaction to its user in order to help with the design and production of complex forms by supporting the designer's implicit skills with computer. The paper presents the design by illustrating the use of the hardware such as the actuators, the sensor and the projector; and by defining the workflow within the software. The paper concludes with the description of a possible use case in which the system is used to design and materialize an object in different scales.
keywords	Design tools development; Digital fabrication and robotics; Human-computer interaction in design; Shape, form and geometry; Inventive Making
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_w08
id	ecaade2018_w08
authors	Aºut, Serdar, Gouwetor, Friso and Latka, Jerzy
year	2018
title	Form-Adapt - Using Adaptable Form-work for Fabricating Double-Curved Surfaces
doi	https://doi.org/10.52842/conf.ecaade.2018.1.047
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 47-48
summary	This workshop will introduce the use of FlexiMold, an adaptable form-work device for fabricating double-curved surfaces; and Marionette, the parametric design tool of Vectorworks. The participants will have the opportunity to experience the entire workflow from the design to the production of a spatial object which has a complex form. The object will be composed of separate panels each of which will be designed by a participant and will be fabricated by team work.
keywords	Computational Design; Computer Aided Manufacturing; Double-Curved Surfaces
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2005_a_1a_b
id	caadria2005_a_1a_b
authors	B. Senyapili, I. Basa
year	2005
title	RECONCILING COMPUTER AND HAND: THE CASE OF AUTHOR IDENTITY IN DESIGN PRESENTATIONS
doi	https://doi.org/10.52842/conf.caadria.2005.013
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 13-22
summary	As computers were newly emerging in the field of architectural design, it was claimed that the impact of computers would change the way architects design and present. However, within the course of computer use in design, although the field of architectural practice might have been altered extremely, in architectural education there still seems to be a bond to conventional mind-hand-paper relation. One of the reasons for that bond is the fact that although being r 1000 elated to many technologies, architecture essentially positions itself around an artistic core that is still fed with conventional modes of creation. Architectural education aims at adopting and working on this very core. One of the major contributors in the formation of this core is the presence of author identity. This paper makes a critical approach to computers in terms of expressing author identity in design presentations especially during design education. We believe that the author identity is important in design education in terms of identifying the potential and skills of the student. Especially in design education the final step of design process turns out to be the presentation, unlike architectural practice where the presented design is actually built. Within this conception, two different studies were held in an educational environment with 160 design students and 20 design instructors. The results of both studies pointed at the fact that the digital opportunities that exist for design education should evolve around preserving and underlining the author identity in design presentations.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia17_456
id	acadia17_456
authors	Page, Mitchell
year	2017
title	A Robotic Fabrication Methodology for Dovetail and Finger Jointing: An Accessible & Bespoke Digital Fabrication Process for Robotically-Milled Dovetail & Finger Joints
doi	https://doi.org/10.52842/conf.acadia.2017.456
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 456- 463
summary	Since the advent of industrialized processes in modern construction industries, the development of and relationship between computer-aided tools of design and computer-controlled tools of fabrication has steadily yielded new and innovative construction methodologies. Whilst industry has adopted many of these innovations for use by highly efficient machines and flexible processes, their operation is often highly dependent on industrial scales of production, and thus often inaccessible for small-scale, bespoke and affordable application. The prototype integrated joint milling methodology, case study and open-source software plugin ‘Dove’ presented in this paper, explores the efficacy of algorithmic processes in dynamically generating complex tooling paths and machine code for fabrication of bespoke dovetail and finger joints on a 6-axis industrial robot. The versatility, speed and precision of 6-axis robotic milling, allows us to liberate the efficiency, integrity and aesthetic of the dovetail and finger joint types from traditional application, and apply them to new architectures involving mass-customisation, complex form, and diverse materialities. In the development of full-immersion milling toolpaths and back-face filleting techniques that drastically reduce cutting times, tool path complexity and material waste, this study seeks to build upon past and current research by proposing a comparatively simple, efficient and more intuitive approach to robotically-fabricated integrated jointing for application at a variety of scales.
keywords	material and construction; fabrication; construction/robotics; digital craft; manual craft
series	ACADIA
email
last changed	2022/06/07 07:58

_id	sigradi2003_047
id	sigradi2003_047
authors	Baccaglio, S., Brebbia, V. Bueno, R., Lagorio, L., Noya, A., Salgado, M., Rucq, M. and Pons, A.
year	2003
title	Una Herramienta Alternativa Para La Comunicación Académica (An Alternative Tool for the Academic Communication)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The aim of this report is to develop a digital pattern easy to use, which will be a suitable tool to display images and texts for academic purposes. The proposal is done through the configuration of a html code page. Besides the study proposes to carry out a digital catalog in order to make easy the files and communication of graphic and photographic documentation. The case of some urban transformations in Rosario's riverside sets an example of its use and verifies its potential condition.
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: