Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 14737

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2021_122
id	ascaad2021_122
authors	Georgiou, Michail; Odysseas Georgiou, Pavlos Fereos, Eftihis Efthimiou
year	2021
title	X-Max \| A Digitally Fabricated, Component-Based, Scrap Metal Assembly
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 536-549
summary	The paper presents the outcome, titled X-MAX, of an educational, intensive 2-week workshop that focused in digitally fabricated, 3D component-based, non-Euclidean geometries using sheet metal forming. Related case studies are analyzed, compared, and grouped to identify the position and contribution of the research in the field. Early design proposals are compared and evaluated based on the hypothesis that improvements in material efficiency and construction/fabrication logistics can contribute towards more affordable design solutions. The fittest solution is further developed and optimized for construction, resulting in a full-scale prototype demonstrating expedited assembly times and decrease in manual labor with parallel savings in material resources. A purposely built design workflow is supported by a comprehensive computational model, enabling information input and output and control via various design parameters. The methodologies of registering scrap sheet metal for fabrication and simulating material bending behavior implementing K-factors are presented and discussed as novel and integral parts of the above workflow.
series	ASCAAD
email
last changed	2021/08/09 13:13

_id	cf2011_p145
id	cf2011_p145
authors	Georgiou, Odysseas
year	2011
title	Interactive Structural Analysis
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 833-846.
summary	This paper re-approaches structural engineering through an interactive perspective by introducing a series of tools that concatenate parametric design with structural analysis, thus achieving interoperability between form and its structural performance. Parametric Design is linked to Structural Analysis using computer programming to establish a common interactive framework that leads to performance based designs that respond to structural constrains and conditions in an interactive manner. A series of examples illustrate the synergy between form and structure by interactively modelling, analysing and visualizing its response.
keywords	Structural engineering, parametric design, interoperability,free form,interactive,analysis
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	fc3c
authors	Hoppe, H., DeRose, T.D., DuChamp, T., Halstead, M., Jin, H., McDonald, J., Schweitzer, J. and Stuetzle, W.
year	1994
title	Piecewise smooth surface reconstruction
source	A. S. Glassner, (ed), Computer Graphics (Siggraph'94 proc.), Annual Conference Series, pp 295-302, July 1994
summary	We present a general method for automatic reconstruction of accurate, concise, piecewise smooth surface models from scattered range data. The method can be used in a variety of applications such as reverse engineering - the automatic generation of CAD models from physical objects. Novel aspects of the method are its ability to model surfaces of arbitrary topological type and to recover sharp features such as creases and corners. The method has proven to be effective, as demonstrated by a number of examples using both simulated and real data. A key ingredient in the method, and a principal contribution of this paper, is the introduction of a new class of piecewise smooth surface representations based on subdivision. These surfaces have a number of properties that make them ideal for use in surface reconstruction: they are simple to implement, they can model sharp features concisely, and they can be fit to scattered range data using an unconstrained optimization procedure.
series	other
last changed	2003/04/23 15:50

_id	f85d
authors	Geraedts, Rob P and Pollalis, Spiro N.
year	2001
title	Remote Teaching in Design Education - Educational and Organizational Issues and Experiences
doi	https://doi.org/10.52842/conf.ecaade.2001.305
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 305-310
summary	The Department of Real Estate and Project Management (BMVB) of the Faculty of Architecture at the Delft University of Technology has been working closely with Professor Spiro N. Pollalis of Harvard University, Graduate School of Design in Cambridge, USA since 1991. His case-based interactive seminars about the management of the design & construction process have been highly appreciated by many generations of students. In Spring 2000, Pollalis suggested to extend the scope of his involvement by introducing a remote teaching component, the subject of his research in the last few years. As Information and Communication Technology (ICT) in the Design and Construction Industry is part of his lectures, it was appropriate to provide the students with a first hand experience on the subject. In the following experiment, the teacher would remain in his office at Harvard while the interactive work and discussion sessions with 130 students in a full lecture room would take place in Delft as planned. The consequences this experiment has had for the course, for the techniques and facilities used, how teachers and students experienced these, and which conclusions and recommendations can be made, are the topics of this paper.
keywords	Remote Teaching, Design & Construction Education, And ICT
series	eCAADe
last changed	2022/06/07 07:51

_id	caadria2012_107
id	caadria2012_107
authors	Gerber, David and A. Senel Solmaz
year	2012
title	PARA-Typing the making of difference: Associative parametric design methodologies for teaching the prototyping of material affect
doi	https://doi.org/10.52842/conf.caadria.2012.233
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 233–242
summary	PARA-Typing the Making of Difference presents design research and instruction into the use of constraint based digital and analogue modelling techniques and the development of associative parametric models to simulate highly differentiated fabricated form. These design research projects were conceived as manual analogue generative processes for prototyping modularity and serial differentiation. Then through associative parametric design technologies and methodologies, modular fields were design explored and developed in concert with material properties and constraints. Utilising digital fabrication full-scale installations were designed, manufactured, and constructed as tiled walls that created differentiated space within site-specific configurations.
keywords	Generative design; parametric modelling; prototyping; digital fabrication; tectonics
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	caadria2012_108
id	caadria2012_108
authors	Gerber, David and Shih-Hsin (Eve) Lin
year	2012
title	Designing-in performance through parameterisation, automation, and evolutionary algorithms: ‘H.D.S. BEAGLE 1.0’
doi	https://doi.org/10.52842/conf.caadria.2012.141
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 141–150
summary	Design is both a goal oriented and decision making activity. It is ill-defined by nature as designing includes weighing and understanding trade-offs amongst soft and hard objectives or in other words vague or imprecise and computationally definable criteria and goals. In this regard designers in most contemporary practices face a crisis of sorts. How do we achieve performance or sustainability under these large degrees of uncertainty or with limited design cycle times? Fundamentally design collaborations, teams of domain experts, are not typically given enough time to design-explore, generate design alternatives in order to find or evolve solution quality through expansive design search spaces. Given these limitations of time and the ever more complex criteria for ‘designing-in’ performance our research approach provides a computational strategy to expand the solution space as well as pre-sort and qualify candidate designs. The research presents a novel methodology and technology framework and an initial implementation that was developed to enhance the human activity of design exploration, domain integration, and further evolve design process for performance goals. The research does so through generating and optimising a highly correlated solution space in conjunction with a near simultaneous evaluation of design alternative fitness.
keywords	Parametric design; multi-disciplinary design optimisation (MDO); evolutionary algorithms; performative design process
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ijac201210403
id	ijac201210403
authors	Gerber, David J.
year	2012
title	PARA-Typing Informing Form and the Making of Difference
source	International Journal of Architectural Computing vol. 10 - no. 4, 501-520
summary	This paper presents design research and instruction into the use of constraint based digital and analogue modelling techniques and the development of associative parametric models to simulate highly differentiated fabricated form. One set of these design research projects were conceived as manual analogue generative processes for prototyping modularity and serial differentiation.Then through parametric design techniques, modular aggregations were design explored and developed in concert with material properties and constraints. Utilizing digital fabrication full-scale installations were designed, manufactured, and for site-specific configurations. A second set of projects provides an extension of the design instruction that includes the integration of performance criteria into these design objectives.The objectives of the research are to present benefits and limitations of the incorporation of parametric design, performance analysis, and prototyping techniques in comprehensive studio instruction.The paper discusses the resultant informed materialized difference and the impacts on achieving reinforced and hands on learning objectives.
keywords	Generative design; parametric modelling; prototyping; digital fabrication; design pedagogy; performative design
series	journal
last changed	2019/05/24 09:55

_id	cf2017_601
id	cf2017_601
authors	Gerber, David Jason; Pantazis, Evangelos; Wang, Alan
year	2017
title	Interactive Design of Shell Structures Using Multi Agent Systems: Design Exploration of Reciprocal Frames Based on Environmental and Structural Performance
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 601-616.
summary	This paper presents a continuation of research on the prototyping of multi-agent systems for architectural design with a focus on generative design as a means to improve design exploration in the context of multiple objectives and complexity. The interactive design framework focuses on coupling force, environmental constraints and fabrication parameters as design drivers for the form finding of shell structures. The objective of the research is to enable designers to intuitively generate free form shells structures that are conditioned by multiple objectives for architectural exploration in early stages of design. The generated geometries are explored through reciprocal frames, and are evaluated in an automated fashion both on local and global levels in terms of their structural and environmental performance and constructability. The analytical results along with fabrication constraints are fed back into the generative design process in order to more rapidly and expansively design explore across complexly coupled objectives. The paper describes the framework and presents the application of this methodology for the design of fabrication aware shell structures in which environmental and structural trade offs drive the final set of design options.
keywords	Generative Design, Parametric Design, Multi-Agent Systems, Digital Fabrication, Form Finding, Reciprocal Frames
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	caadria2012_109
id	caadria2012_109
authors	Gerber, David; Mohamed M. ElSheikh and Aslihan Senel Solmaz
year	2012
title	Associative parametric design and financial optimisation - 'Cash Back 1.0': Parametric design for visualising and optimising Return on Investment for early stage design decision-making
doi	https://doi.org/10.52842/conf.caadria.2012.047
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 47–56
summary	Cash-Back 1.0 presents research on the development of methodologies and technologies to simulate the cause and effect of early stage geometric design alternatives of buildings and the real time results upon financial pro-forma. Through the encoding of design rules and their associative relationships to financial pro-forma the research illustrates enhanced visualization of early stage building design decisions and their cumulative impact on financial goals and constraints. The research presents value an associative parametric design process affords often-disparate domains through correlation and visualization. The paper describes incorporation of a feedback loop between pro-forma and geometric models in conjunction with an optimization method. Given the level of uncertainty in early stage design decision making the research contributes partial solutions to the domain problems of design decision uncertainty and design cycle latency and is further argumentation for increased use of parametric design methods and automation to support design domain integration.
keywords	Parametric design; genetic algorithm; design decision support; multi domain optimisation; domain integration
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ascaad2007_001
id	ascaad2007_001
authors	Germen, M.
year	2007
title	Virtual Architecture: Reconstructing Architecture Through Photography
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 1-16
summary	The concept of construction in architectural design process is a temporary action that exists for a while and transforms itself into another product; i.e. the final building to be inhabited. Construction site can be taken as a podium where a play-to-remain-incomplete is being staged. The incompleteness causes us to dream, due to the fact that a complete building loses its narrative potential as it informs us about all the necessary pieces that constitute the whole: There is no puzzle to solve... Construction in this sense is like a historical ruin; Paul Zucker asserts that "ruins have held for a long time a unique position in the visual, emotional, and literary imagery of man. They have fascinated artists, poets, scholars, and sightseers alike. Devastated by time or willful destruction, incomplete as they are, they represent a combination of man-made forms and of organic nature." Architectural photography has the potential of re-creating this puzzle back again in order to bring an alternative representation to architecture. The architectural photographer is sometimes offered the freedom of reinterpreting, reconstructing architecture in order to be able to present a novel virtual perception to the audience. The idea here is to get some spatial clues that can later be used in other architectural projects. I was personally invited to two different concept exhibits in which I was given the freedom of inventing a virtual architecture through photography. The concept text written for one of these exhibits goes as follows: “I went, saw, stopped, attempted to grasp and enter it, looked at construction process and workers with respect, tried to internalize, wanted to claim it for a while, dreamed of creating a microcosm out of the macrocosm I was in, shot and shot and shot and finally selected: The created world, though intended for all, was probably quite a personal illusion...” Virtual architecture is a term used for architecture specifically created in the computer environment and never used in the realm of architectural photography. People like Piranesi, Lebbeus Woods, M.C. Escher, Marcos Novak, etc. previously dreamed about architectures that could exist virtually on paper, screen, digital environments. This paper will try to prove that this practice of (re)designing architecture virtually can be transferred to one of the most important realms of visuality: Photography. Various digital processes like stitching multiple photos together and mirroring images in image editing software like Photoshop, allow this virtual architecture to take place in the computer environment. Following this, I propose to raise the term “snap architecture” to connect it to the frequently referred concept of “paper architecture.”
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ecaade2010_029
id	ecaade2010_029
authors	Germen, Murat; Kavlak, Emrah
year	2010
title	Future Users, Future Cities: Dweller as Designer
doi	https://doi.org/10.52842/conf.ecaade.2010.057
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.57-64
summary	As technology advances, users get more detached from the way things work and are produced. Users end up being pure consumers and leave their positions as decision makers behind. Before the architecture and buildings processes were industrialized, most practitioners of the so-called vernacular architecture were in fact the dwellers of what they built and they easily met the specific personal needs since they were in total control. Some “architectural theorists have turned to vernacular construction with the conviction that such buildings and settlements express the interconnectedness between humans and the landscapes they live in.” (Beesley and Bonnemaison 2008). Considering the present day intense building activity, such relationship of dweller and architecture seems not possible excepting a very few examples to later referred to. This paper will instead focus on the possibility of the non-architect users of architectures as decision makers in order to reach designs that meet the requirements of their addressees.
wos	WOS:000340629400005
keywords	User driven architecture; Architecture without architects; Architecture as interface; Sustainability; User involvement
series	eCAADe
email
last changed	2022/06/07 07:51

_id	476d
authors	Gero, J. and Maher, M.
year	1988
title	Future Roles of Knowledge-based Systems in the Design Process
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 81-90
summary	This paper examines the future roles of knowledge-based systems in the design process. It commences with a brief review of computer-aided design and knowledge-based systems prior to examining the present and future roles of knowledge-based systems in design under the headings of: design analysis/formulation; design synthesis; and design evaluation. The paper concludes with a discussion on design integration, novel design, and detail design.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	46ce
id	46ce
authors	Gero, J. S.
year	1991
title	Ten problems for AI in design
source	Workshop on AI in Design, IJCAI-91, un-numbered
summary	Modern design research dates back to the end of the eighteenth century when French theorists attempted to describe design as a process. The notion of process in design dates back to the Roman engineer/architect/writer Vitruvius who described both process and performance aspects of designing. Since the 1940s there has been a variety of attempts to provide formal models of design ranging from prescriptive algorithmic-like descriptions through mathematical model and systems theoretic descriptions to the current paradigm based on the precepts and notions of artificial intelligence. All of these, including the current work, is primarily concerned with treating the process aspects of design.
series	other
type	normal paper
email
more	http://www.arch.usyd.edu.au/~john/
last changed	2006/05/27 18:38

_id	e994
id	e994
authors	Gero, J. S.
year	1993
title	The role of visual emergence in collaborative design
source	Computational Support for Distributed Collaborative Design, Key Centre of Design Computing, University of Sydney, pp. 103-115
summary	There are two fundamental approaches to the use of computers to support collaborative design: (i) to use the computer as a device which increases the efficiency of what designers could do previously, and (ii) to use the computer as an active device which allows designers to do what they could not readily do previously. // This paper is concerned with the latter approach by introducing the concept of visual or graphical emergence as one form of collaboration at a distance that can not readily be carried out without the aid of the computer.
series	other
type	normal paper
email
more	http://www.arch.usyd.edu.au/~john/
last changed	2006/05/27 18:21

_id	5ed1
authors	Gero, J.S. and Fujii, H.
year	1999
title	A computational framework for concept formation for a situated design agent
source	K. Hori and L. Candy (Eds.), Proceedings Second International Workshop on Strategic Knowledge and Concept Formation, Iwate Prefectural University, Iwate, Japan, pp. 59-71
summary	This paper takes the approach that designing is situated and that concepts are formed as a consequence od the this situatedness of designing. The papers presents a framework for concept formation that draws on a structure of a a design agent that includes sensors, perceptors and conceptors that interact with each other and the external and internal environment of the agent to produce the situation that is a contingent basis for the formation and use of concepts.
keywords	Concept Formation, Situatedness
series	other
email
last changed	2003/04/06 09:10

_id	c681
authors	Gero, J.S. and Kazakov, V.
year	1995
title	Evolving building blocks for design using genetic engineering: A formal approach
source	J.S. Gero and F. Sudweeks (eds), Advances in Formal Design Methods for CAD , IFIP-University of Sydney, Sydney, pp. 29-48
summary	This paper presents a formal approach to the evolution of a representation for use in a design process. The approach adopted is based on concepts associated with genetic engineering. An initial set of genes representing elementary building blocks is evolved into a set of complex genes representing targeted building blocks. These targeted building blocks have been evolved because they are more likely to produce designs which exhibit desired characteristics than the commencing elementary building blocks. The targeted building blocks can then be used in a design process. The paper presents a formal evolutionary model of design representations based on genetic algorithms and uses pattern recognition techniques to execute aspects of the genetic engineering. The paper describes how the state space of possible designs changes over time and illustrates the model with an example from the domain of two-dimensional layouts. It concludes with a discussion of style in design.
series	other
email
last changed	2003/04/06 07:29

_id	c91a
authors	Gero, J.S. and Kazakov, V.
year	1999
title	Adapting evolutionary computing for exploration in creative designing
source	J.S. Gero and M.L. Maher (Eds.), Computational Models of Creative Design IV, Key Centre of Design Computing and Cognition, University of Sydney, Sydney, Australia, pp. 175-186
summary	This paper introduces a modification to genetic algorithms which provides computational support to creative designing by adaptively exploring design structure spaces. This modification is based on the re-interpretation of the GA's crossover as a random sampling of interpolations and its replacement with the random sampling of direct phenotype-phenotype interpolation and phenotype-phenotype extrapolation. Examples of the process are presented
keywords	Creative Design, Evolutionary Computation
series	other
email
last changed	2003/04/06 09:11

_id	b98f
authors	Gero, J.S. and Sosa, R.
year	2002
title	Creative Design Situations: Artificial Creativity in Communities of Design Agents
doi	https://doi.org/10.52842/conf.caadria.2002.191
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 191-198
summary	This paper presents the outline of experiments with a behaviour-based computational model of creativity in design called Creative Design Situations. This model aims to allow the study of social creativity through the computational implementation of a community of creative design agents.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	b07d
authors	Gero, J.S., Chase, S. and Rosenman, M. (Eds.)
year	2001
title	CAADRIA 2001 [Conference Proceedings]
doi	https://doi.org/10.52842/conf.caadria.2001.
source	Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6 / Sydney 19-21 April 2001, 506 p.
summary	Computer-aided architectural design research and teaching has a long history going back to the 1960s. However, the last ten years has seen a dramatic upsurge in activity brought about by factors such as the increasing use of CAD systems in practice, the increase in computer literacy generally and perhaps, equally importantly, the development and widespread use of the World Wide Web. The CAADRIA conference series provides a forum for the presentation and exchange of ideas and experiences in CAAD, particularly focussed on Asian research and teaching. This, the proceedings of the Sixth International Conference on Computer-Aided Architectural Design Research and Teaching in Asia, presents 57 (31 long and 26 short) papers. The 57 papers were selected from the 114 submissions following a blind review of extended abstracts. Each submission was reviewed by two referees and the decision to accept was based on a committee's assessment of all the submissions. The final papers were assessed to determine if the reviewers' recommendations had been complied with. The authors of the selected papers represent 17 countries, making this an international as well as an Asian conference.
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:51

_id	cad3
authors	Gero, J.S.
year	1998
title	Conceptual designing as a sequence of situated acts
source	I. Smith (Ed.), Artificial Intelligence in Structural Engineering, Springer, Berlin, pp. 165-177
summary	This paper introduces conceptual designing within an F-B-S framework. It then goes on to describe a number of models of designing before introducing the notions of situatedness and situated acts. The remainder of the paper describes the role of situatedness and situated acts in conceptual designing. It attempts to show that a number of otherwise difficult design phenomena are modelable using situatedness and situated acts. A demonstration example concludes the paper along with some of the research issues this view of designing brings with it.
keywords	Conceptual Designing, Situatedness
series	other
email
last changed	2003/04/06 09:01

For more results click below: