Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 638

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2016_091
id	ecaade2016_091
authors	Monesi, Roberto and Erioli, Alessio
year	2016
title	Homeorhetic Assemblies - Turning beehive formation dynamics into high-res tectonics
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 435-444
doi	https://doi.org/10.52842/conf.ecaade.2016.1.435
wos	WOS:000402063700048
summary	This thesis research investigates the architectural and tectonic potential that can stem from behavioral complexity of collective construction in biological systems and its dynamic relations with the colony in terms of the continuous construction and adaptation process over the time. The role model considered as a case study regards the dynamics of honeycomb formation, and in particular three fundamental behaviours have been extracted from this biological process: stigmergic behavior, structural self-stabilization capacity and environmental adaptability. All these features were then coded into a multi agent system interacting in an heterogeneous environment and capable of selectively adding elements to a particle-spring system that is periodically self-adjusting, simulating material behavior. The outcomes, strongly rich and heterogeneous in their spatial organization, are characterized by a continuous tectonic of emerging singularities seamlessly flowing into one another.
keywords	tectonics; beehive; stigmergy; multi-agent system; robotics
series	eCAADe
email
last changed	2022/06/07 07:58

_id	lasg_whitepapers_2016_fulltext
id	lasg_whitepapers_2016_fulltext
year	2016
title	Living Architecture Systems Group White Papers 2016
source	Living Architecture Systems Group White Papers 2016 [ISBN 978-1-988366-10-4 (EPUB)] Riverside Architectural Press 2016: Toronto, Canada
summary	Living Architecture Systems Group "White Papers 2016" is a dossier produced for the occasion of the Living Architecture Systems Group launch event and symposium hosted on November 4 and 5 at the Sterling Road Studio in Toronto and the University of Waterloo School of Architecture at Cambridge. The "White Papers 2016" presents research contributions from the LASG partners, forming an overview of the partnership and highlighting oppportunities for future collaborations.
keywords	design, dissipative methods, design methods, synthetic cognition, neuroscience, metabolism, STEAM, organicism, field work, responsive systems, space, visualizations, sensors, actuators, signal flows, art and technology, new media art, digital art, emerging technologies, citizen building, bioinspiration, performance, paradigms, artificial nature, virtual design, regenerative design, 4DSOUND, spatial sound, biomanufacturing, eskin, delueze, bees, robotics
last changed	2019/07/29 14:02

_id	ecaade2016_210
id	ecaade2016_210
authors	Abdelmohsen, Sherif, Massoud, Passaint and Elshafei, Ahmed
year	2016
title	Using Tensegrity and Folding to Generate Soft Responsive Architectural Skins
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 529-536
doi	https://doi.org/10.52842/conf.ecaade.2016.1.529
wos	WOS:000402063700058
summary	This paper describes the process of designing a prototype for a soft responsive system for a kinetic building facade. The prototype uses lightweight materials and mechanisms to generate a building facade skin that is both soft (less dependent on hard mechanical systems) and responsive (dynamically and simultaneously adapting to spatial and environmental conditions). By combining concepts stemming from both tensegrity structures and folding mechanisms, we develop a prototype that changes dynamically to produce varying facade patterns and perforations based on sensor-network data and feedback. We use radiation sensors and shape memory alloys to control the prototype mechanism and allow for the required parametric adaptation. Based on the data from the radiation sensors, the lengths of the shape memory alloys are altered using electric wires and are parametrically linked to the input data. The transformation in the resulting overall surface is directly linked to the desired levels of daylighting and solar exposure. We conclude with directions for future research, including full scale testing, advanced simulation, and multi-objective optimization.
keywords	Soft responsive systems; tensegrity; folding; kinetic facades
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2016_049
id	ascaad2016_049
authors	Abdelsabour, Inas; Heba Farouk
year	2016
title	Impact of Using Structural Models on Form Finding - Incorporating Practical Structural Knowledge into Design Studio
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 483-492
summary	Physical Models as an architectural design tool, had major effect on architecture learning process. In structural form finding, it helped in improving visual design thinking to track form creation processes during form finding design stage. The aim is to study the impact of using physical models for second year architecture students in design studios learning. By analyzing and comparing students’ performance and progress; to clarify the effect of using physical models as a tool for designing progression, followed by analytical study on the students' structural models, in order to investigate the influence of models on their design educational progress. Research achieved that there were three basic phases the students pass through during form finding process when used manual physical models that improve the students' design capability.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ecaade2016_048
id	ecaade2016_048
authors	Abramovic, Vasilija and Achten, Henri
year	2016
title	From Moving Cube to Urban Interactive Structures - A case study
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 661-668
doi	https://doi.org/10.52842/conf.ecaade.2016.1.661
wos	WOS:000402063700071
summary	When thinking about the future vision of a city, having in mind recent development in digital technologies and digital design tools we are inclined to expect new building structures which incorporate this technology to better help us manage the complexity of life, and to simplify our daily lives and tasks. The idea behind this research paper lies in design of such structures, which could be put inside an urban context and engage in creating a built environment that can add more to the quality of life. For us Interactive architecture is architecture that is responsive, flexible, changing, always moving and adapting to the needs of today. The world is becoming more dynamic, society is constantly changing and the new needs it develops need to be accommodated. As a result architecture has to follow. Spaces have to become more adaptive, responsive and nature concerned, while having the ability for metamorphosis, flexibility and interactivity. Taken as a starting point of this idea is a specific module from graduation project in 2014 "The Unexpected city", where it was possible to test out first ideas about interactive and flexible objects in an urban environment.
keywords	Flexible architecture; Interactive architecture; Responsive systems
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2016_537
id	sigradi2016_537
authors	Abreu, Sandro Canavezzi de; Vasconcelos, Guilherme Nunes de; Stralen, Mateus van
year	2016
title	Meta-Lab: programação de um laboratório interativo [Metal-Lab: the programming of an interactive lab]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.769-775
summary	Here we discuss the technological and theoretical issues that conform the restructuring proposal of the Computer Laboratory of Escola de Arquitetura e Urbanismo da UFMG, reconfiguring it in what we call “Meta-Lab”: a space composed of programmable modules that make up the so called Sistema Hidra(!), a system structured in three levels (sensory, processor and actuator level) which receives environmental information via sensors, processes these information and changes the environment using actuators. We will address in more detail the processing level, a fundamental layer for enabling the implementation of “interactive permanency” through continuous reprogramming of interactions in Meta-Lab.
keywords	Interactivity; Combinatory; Interactive Architecture
series	other
type	normal paper
email
last changed	2017/06/21 14:52

_id	caadria2016_777
id	caadria2016_777
authors	Aditra, Rakhmat F. and Andry Widyowijatnoko
year	2016
title	Combination of mass customisation and conventional construction: A case study of geodesic bamboo dome
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 777-786
doi	https://doi.org/10.52842/conf.caadria.2016.777
summary	With the development of advance fabrication, several digi- tal fabrication approaches have been developed. These approaches en- able better form exploration than the conventional manufacturing pro- cess. But, the built examples mostly rely on advance machinery which was not familiar or available in developed country where construction workers are still abundant. Meanwhile, much knowledge gathers in the field practice. This research is aimed to explore an alternative con- struction workflow and method with the combination of mass custom- ization and conventional construction method and to propose the structure system that emphasized this alternative workflow and meth- od. Lattice structure was proposed. The conventional construction method was used in the struts production and mass customization method, laser cutting, and was used for connection production. The algorithmic process was used mainly for data mining, details design, and component production. The backtracking was needed to be pre- dicted and addressed previously. Considerations that will be needed to be tested by further example are on the transition from the digital pro- cess to the manual process. Next research could be for analysing the other engineering aspect for this prototype and suggesting other struc- tural system with more optimal combination of conventional construc- tion and mass customization.
keywords	Mass customisation; algorithmic design; digital fabrication; geodesic dome; lattice structure
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2016_059
id	ascaad2016_059
authors	Admed, Mohammad H.K.
year	2016
title	Towards Developing BIM Curriculum in Higher Education in Egypt
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 589-598
summary	The paper surveys and discusses the current state of teaching BIM in departments of architecture in Egypt. It also connects it to the increasing professional market demand for technologically qualified architects. In specific, the paper explores the reasons behind the fact that the local BIM curriculum is lagging behind its international counterpart. It also explores the need to utilise BIM software capabilities. A further comparative survey is carried out between local case studies and international cases through identifying several stages of BIM implementation in both teaching and design. The advantages and disadvantages of the current method of teaching are explored in an effort to improve performance of BIM curriculum.
series	ASCAAD
email
last changed	2017/05/25 13:34

_id	sigradi2016_448
id	sigradi2016_448
authors	Afsari, Kereshmeh; Eastman, Charles M.; Shelden, Dennis R.
year	2016
title	Data Transmission Opportunities for Collaborative Cloud-Based Building Information Modeling
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.907-913
summary	Collaboration within Building Information Modeling process is mainly based on file transfer while BIM data being exchanged in either vendor specific file formats or neutral format using Industry Foundation Classes (IFC). However, since the Web enables Cloud-based BIM services, it provides an opportunity to exchange data via Web transfer services. Therefore, the main objective of this paper is to investigate what features of Cloud interoperability can assist a network-based BIM data transmission for a collaborative work flow in the Architecture, Construction, and Engineering (AEC) industry. This study indicates that Cloud-BIM interoperability needs to deploy major components such as APIs, data transfer protocols, data formats, and standardization to redefine BIM data flow in the Cloud and to reshape the collaboration process.
keywords	BIM; Cloud Computing; Data Transmission; Interoperability; IFC
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2016_026
id	ecaade2016_026
authors	Agkathidis, Asterios
year	2016
title	Implementing Biomorphic Design - Design Methods in Undergraduate Architectural Education
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 291-298
doi	https://doi.org/10.52842/conf.ecaade.2016.1.291
wos	WOS:000402063700033
summary	In continuation to Generative Design Methods, this paper investigates the implementation of Biomorphic Design, supported by computational techniques in undergraduate, architectural studio education. After reviewing the main definitions of biomorphism, organicism and biomimicry synoptically, we will assess the application of a modified biomorphic method on a final year, undergraduate design studio, in order to evaluate its potential and its suitability within the framework of a research led design studio, leading to an RIBA accredited Part I degree. Our research findings based on analysis of design outputs, student performance as well as moderators and external examiners reports initiate a constructive debate about accomplishments and failures of a design methodology which still remains alien to many undergraduate curricula.
keywords	CAAD Education; Strategies, Shape Form and Geometry; Generative Design; Design Concepts
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2016_797
id	caadria2016_797
authors	Agusti?-Juan, Isolda and Guillaume Habert
year	2016
title	An environmental perspective on digital fabrication in architecture and construction
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 797-806
doi	https://doi.org/10.52842/conf.caadria.2016.797
summary	Digital fabrication processes and technologies are becom- ing an essential part of the modern product manufacturing. As the use of 3D printing grows, potential applications into large scale processes are emerging. The combined methods of computational design and robotic fabrication have demonstrated potential to expand architectur- al design. However, factors such as material use, energy demands, du- rability, GHG emissions and waste production must be recognized as the priorities over the entire life of any architectural project. Given the recent developments at architecture scale, this study aims to investi- gate the environmental consequences and opportunities of digital fab- rication in construction. This paper presents two case studies of classic building elements digitally fabricated. In each case study, the projects were assessed according to the Life Cycle Assessment (LCA) frame- work and compared with conventional construction with similar func- tion. The analysis highlighted the importance of material-efficient de- sign to achieve high environmental benefits in digitally fabricated architecture. The knowledge established in this research should be di- rected to the development of guidelines that help designers to make more sustainable choices in the implementation of digital fabrication in architecture and construction.
keywords	Digital fabrication; LCA; sustainability; environment
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia16_10
id	acadia16_10
authors	Ahlquist, Sean
year	2016
title	Procedural Design
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 10-11
doi	https://doi.org/10.52842/conf.acadia.2016.010
series	ACADIA
type	introduction
email
last changed	2022/06/07 07:54

_id	acadia16_152
id	acadia16_152
authors	Ahlquist, Sean
year	2016
title	Generative Robotics
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 152-153
doi	https://doi.org/10.52842/conf.acadia.2016.152
series	ACADIA
type	introduction
email
last changed	2022/06/07 07:54

_id	ijac201614105
id	ijac201614105
authors	Ahlquist, Sean
year	2016
title	Sensory material architectures: Concepts and methodologies for spatial tectonics and tactile responsivity in knitted textile hybrid structures
source	International Journal of Architectural Computing vol. 14 - no. 1, 63-82
summary	As the knowledge of material computation advances, continuing the seamless integration of design and fabrication, questions beyond materialization can be addressed with a focus on sensing, feedback, and engagement as critical factors of design exploration. This article will discuss a series of prototypes, design methodologies, and technologies that articulate a textile’s micro-architecture, at the scale of fibers and stitches, to instrumentalize simultaneous structural, spatial, and sensory-responsive qualities. The progression of research displays an ever-deepening instrumentalization of fiber structure and its implications to form definition and responsivity, in creating form- and bending-active structures. The research results in a more refined definition of material behavior as the innate phenomena which emerge at the moment of textile fabrication. Ultimately, the architecture, in its materiality and physical, visual, and auditory responsivity, is designed to address specific challenges for children in filtering multiple sensory inputs, an underlying factor of autism spectrum disorder.
keywords	CNC Knitting, Form-active, Bending-active, Textile hybrid, Mutli-sensory
series	journal
last changed	2016/06/13 08:34

_id	acadia16_234
id	acadia16_234
authors	Ahlquist, Sean
year	2016
title	Programmable Matter
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 234-235
doi	https://doi.org/10.52842/conf.acadia.2016.234
series	ACADIA
type	introduction
email
last changed	2022/06/07 07:54

_id	ascaad2016_014
id	ascaad2016_014
authors	Ahmed, Zeeshan Y.; Freek P. Bos, Rob J.M. Wolfs and Theo A.M. Salet
year	2016
title	Design Considerations Due to Scale Effects in 3D Concrete Printing
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 115-124
summary	The effect of scale on different parameters of the 3D printing of concrete is explored through the design and fabrication of a 3D concrete printed pavilion. This study shows a significant gap exists between what can be generated through computer aided design (CAD) and subsequent computer aided manufacturing (generally based on CNC technology). In reality, the 3D concrete printing on the one hand poses manufacturing constraints (e.g. minimum curvature radii) due to material behaviour that is not included in current CAD/CAM software. On the other hand, the process also takes advantage of material behaviour and thus allows the creation of shapes and geometries that, too, can’t be modelled and predicted by CAD/CAM software. Particularly in the 3D printing of concrete, there is not a 1:1 relation between toolpath and printed product, as is the case with CNC milling. Material deposition is dependent on system pressure, robot speed, nozzle section, layer stacking, curvature and more – all of which are scale dependent. This paper will discuss the design and manufacturing decisions based on the effects of scale on the structural design, printed and layered geometry, robot kinematics, material behaviour, assembly joints and logistical problems. Finally, by analysing a case study pavilion, it will be explore how 3D concrete printing structures can be extended and multiplied across scales and functional domains ranging from structural to architectural elements, so that we can understand how to address questions of scale in their design.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	ecaade2016_ws-folding
id	ecaade2016_ws-folding
authors	Akleman, Ergun, Kalantar, Negar and Borhani, Alireza
year	2016
title	Folding The Unfoldable - A Method For Constructing Complex-Curved Geometry With Quad Edge Panels
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 69-72
doi	https://doi.org/10.52842/conf.ecaade.2016.1.069
wos	WOS:000402063700007
summary	This paper explains a method will be used during a workshop for constructing complex-curved geometry with quad edge panels. In this workshop, we demonstrate that quad-edge mesh data structure can efficiently be used to construct complex large shapes. With hands-on experiments, we will show a vast variety of shapes can be constructed using square, rectangular, parallelogram and extruded-line shaped panels. In addition, using a system we have recently developed to unfold polygonal mesh, we will demonstrate how desired shapes can be constructed by using laser-cut quadrilateral panels. This approach is particularly suitable to construct complicated sculptural and architectural shapes from anisotropic materials that can only be bended in one direction.
keywords	Shape Modeling; Physical Construction; Complex-Curved Geometry; Digital Fabrication
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2016_048
id	ascaad2016_048
authors	Al Shiekh, Bassam
year	2016
title	Arabic Calligraphy and Parametric Architecture - Translation from a calligraphic force to an architectural form
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 469-482
summary	This paper describes an on-going research that unites two distinct and seemingly unrelated interests. One is Arabic calligraphy and the other is parametric architecture. The effort is to integrate these interests and, in doing so, balance cultural issues with technological ones, traditional with contemporary and spiritual with material. Moreover, this paper is inspired by Arabic calligraphy and its influence on Zaha Hadid’s designs; it is invigorated by parametric systems and their capacity as a source of architectural forms. This paper will observe the rising importance of computation technologies to architecture, which has always been a form of negotiation between ‘function and fiction’ and ‘force and form’. The paper proposes a Parametric Calligraphic Machine that simultaneously produces, connects and separates calligraphic surfaces, calligraphic images and calligraphic reality. Therefore, the goal is to examine this hypothesis in order to produce a set of techniques, tools and methods that inform the three-dimensional design process of Arabic calligraphy’s contemporary possibilities by addressing a process description rather than a state description of creating calligraphic images and calligraphic surfaces. The theoretical approach highlights issues pertaining to calligraphy, spatiality, translation, generative systems, parametric design, visual structure, force and form.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ascaad2016_001
id	ascaad2016_001
authors	Al-Attili, Aghlab; Anastasia Karandinou and Ben Daley
year	2016
title	Parametricism vs Materialism - Evolution of digital technologies for development
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, 597 p.
summary	We build on previous technological developments in CAAD by looking into parametric design exploration and the development of the concept of parametricism. We use the phenomenological backdrop to account for our physical experiences and encounters as well as our mental ones; both evident in the link between parametric design as a process and an outcome. In specific, we previously examined two particular metaphors. The first metaphor addressed aspects of virtual environments that resemble our physical world; In other words, computer model as physical model and digital world as material world. In this volume, we extend the exploration into aspects of virtual environments and their resemblance to physical environments by looking at ‘performance’ aspects: the way in which environments are sensed, measured, tracked and visualised. Moreover, we reflect on matters and materiality in both virtual and physical space philosophically, theoretically, practically and reflectively. The second metaphor looked into the modes and means of interaction between our bodies and such virtual environment. Here we extend the investigation to look at the ways in which measures of environmental performance influence human interaction in real environments. The exploration takes us further to look into the area of design fabrication of the built environment, and methods in which developed processes meet environmental performance requirements, and the innovative outcomes that lead to disruptive technologies getting introduced into design and we revisit parametric design under this focus area.
series	ASCAAD
type	normal paper
email
last changed	2024/02/13 14:28

_id	ascaad2016_052
id	ascaad2016_052
authors	Al-Badry, Sally; Cesar Cheng, Sebastian Lundberg and Georgios Berdos
year	2016
title	Living on the Edge - Reinventing the amphibiotic habitat of the Mesopotamian Marshlands
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 513-526
summary	The Mesopotamian Marshlands form one of the first landscapes where people started to transform and manipulate the natural environment in order to sustain human habitation. For thousands of years, people have transformed natural ecosystems into agricultural fields, residential clusters and other agglomerated environments to sustain long-term settlement. In this way, the development of human society has been intricately linked to the extraction, processing and consumption of natural resources. The Mesopotamian Marshlands, located in one of the hottest and most arid areas on the planet, formed a unique wetlands ecosystem, which apart from millions of people, sustained a very high number of wildlife and endemic species. Several historical, political, social and climatic changes, which densely occurred during the past century, completely destroyed the unique civilisation of the area, made all the wild flora and fauna disappear and forced hundreds of thousands of people to migrate. During the last decade, many efforts have been made to restore the marshlands. However, these efforts are lacking a comprehensive design strategy, coherent goals and deep understanding of the complex current geopolitical situation, making the restoration process an extremely difficult task. This work aims at providing strategies for recovering the Mesopotamian Marshlands, organising productive functions in order to sustain the local population and design a new inhabitation model, using advanced computational tools while taking into account the extreme climatic conditions and several unique cultural aspects. Part of the aim of this work is to advance the use of computation and explore the opportunities that digital tools afford in helping find solutions to complex design problems where various design variables need to be coordinated to satisfy the design goals. Today, advanced computation enables designers to use population consumption demands, ecological processes and environmental inputs as design parameters to develop more robust and resilient regional planning strategies. This work has the double aim of first, presenting a framework for re-inhabiting the Marshlands of Mesopotamia. Second, the work suggests a design methodology based on computer-aided design for developing and organising productive functions and patterns of human occupation in wetland environments.
series	ASCAAD
email
last changed	2017/05/25 13:34

For more results click below: