Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1496

Reformat results as: short short into frame detailed detailed into frame

_id	acadia16_318
id	acadia16_318
authors	Huang, Alvin
year	2016
title	From Bones to Bricks: Design the 3D Printed Durotaxis Chair and La Burbuja Lamp
doi	https://doi.org/10.52842/conf.acadia.2016.318
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 318-325
summary	Drawing inspiration from the variable density structures of bones and the self-supported cantilvers of corbelled brick arches, the Durotaxis Chair and the La Burbuja lamp explore a material-based design process by responding to the challenge of designing a 3D print, rather than 3D printing a design. As such, the fabrication method and materiality of 3D printing define the generative design constraints that inform the geometry of each. Both projects are seen as experiments in the design of 3D printed three-dimensional space packing structures that have been designed specifically for the machines by which they are manufactured. The geometry of each project has been carefully calibrated to capitalize on a selection of specific design opportunities enabled by the capabilities and constraints of additive manufacturing. The Durotaxis Chair is a half-scale prototype of a fully 3D printed multi-material rocking chair that is defined by a densely packed, variable density three-dimensional wire mesh that gradates in size, scale, density, color, and rigidity. Inspired by the variable density structure of bones, the design utilizes principal stress analysis, asymptotic stability, and ergonomics to drive the logics of the various gradient conditions. The La Burbuja Lamp is a full scale prototype for a zero-waste fully 3D printed pendant lamp. The geometric articulation of the project is defined by a cellular 3D space packing structure that is constrained to the angles of repose and back-spans required to produce un-supported 3D printing.
keywords	parametic design, digital fabrication, structural analysis, additive manufacturing, 3d printing
series	ACADIA
type	paper
email
last changed	2022/06/07 07:50

_id	acadia18_312
id	acadia18_312
authors	Ariza, Inés; Mirjan, Ammar; Gandia, Augusto; Casas, Gonzalo; Cros, Samuel; Gramazio, Fabio; Kohler, Matthias.
year	2018
title	In Place Detailing. Combining 3D printing and robotic assembly
doi	https://doi.org/10.52842/conf.acadia.2018.312
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 312-321
summary	This research presents a novel construction method that links robotic assembly and in place 3D printing. Rather than producing custom joints in a separate prefabrication process, our approach enables creating highly customized connection details that are 3D printed directly onto off-the-shelf building members during their assembly process. Challenging the current fashion of highly predetermined joints in digital construction, detailing in place offers an adaptive fabrication method, enabling the expressive tailoring of connection details addressing its specific architectural conditions. In the present research, the in place detailing strategy is explored through robotic wire arc additive manufacturing (WAAM), a metal 3D printing technique based on MIG welding. The robotic WAAM process coupled with localization and path-planning strategies allows a local control of the detail geometry enabling the fabrication of customized welded connections that can compensate material and construction tolerances. The paper outlines the potential of 3D printing in place details, describes methods and techniques to realize them and shows experimental results that validate the approach.
keywords	work in progress, fabrication & robotics, robotic production, materials/adaptive systems, architectural detailing
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	caadria2022_299
id	caadria2022_299
authors	Cui, Qiang, Zhang, Huikai, Pawar, Siddharth Suhas, Yu, Chuan, Feng, Xiqiao and Qiu, Song
year	2022
title	Topology Optimization for 3D-Printable Large-Scale Metallic Hollow Structures With Self-Supporting
doi	https://doi.org/10.52842/conf.caadria.2022.2.101
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 101-110
summary	Design for Additive Manufacturing (DfAM), is a one of the most commonly used and foundational techniques used in the development of new products, and particularly those that involve large-scale metallic structures composed of hollow components. One such AM technique is Wire Arc Additive Manufacturing (WAAM), which is the application of robotic welding technology applied to Additive Manufacturing. Due to the lack of a simple method to describe the fabricating constraint of WAAM and the complex hollow morphology, which difficultly deploys topology optimization structural techniques that use WAAM. In this paper, we develop a design strategy that unifies ground-structure optimization method with generative design that considers the features of hollow components, WAAM overhang angle limits and manufacturing thickness limits. The method is unique in that the user can interact with the design results, make changes to parameters, and alter the design based on the user‚s aesthetic or specific manufacturing setup needs. We deploy the method in the design and 3D printing of an optimized Electric Vehicle Chassis and successfully test in under different loading conditions.
keywords	Topology optimization, Generative design, Self-supporting, Hollow structures, Metallic 3D printing, SDG 12
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	acadia22pr_106
id	acadia22pr_106
authors	Sabin, Jenny E.; Paraszczak, Michael; Pranger, Dillon; Hilla, John
year	2022
title	Convergence: Advancing Robotic Wire Arc Additive Manufacturing to the Architectural Scale in an Urban Context
source	ACADIA 2022: Hybrids and Haecceities [Projects Catalog of the 42nd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-7-4]. University of Pennsylvania Stuart Weitzman School of Design. 27-29 October 2022. edited by M. Akbarzadeh, D. Aviv, H. Jamelle, and R. Stuart-Smith. 106-111.
summary	Convergence celebrates the thriving, vibrant, and rich heritage of excellence of the University of Nebraska Medical Center through materialized concepts that embed change, transformation, and contemplation. The project incorporates the most advanced methods and innovations in digital and robotic fabrication with the integration of timeless and contextually sensitive materials that interact with the sun and human perception. The project features stainless steel wire arc additive manufacturing through robotic 3D printing, nonstandard CNC machined polycarbonate panels laminated with responsive wavelength-dependent dichroic film, and stainless-steel stiffener rings. Sited in the new Northwall Plaza, Convergence serves as the outdoor threshold to the buildings and the campus welcome center facilitating an ideal setting for conversations, fellowship, and engagement by students and faculty.
series	ACADIA
type	project
email
last changed	2024/02/06 14:06

_id	caadria2019_664
id	caadria2019_664
authors	Zhou, Yifan, Zhang, Liming, Wang, Xiang, Chen, Zhewen and Yuan, Philip F.
year	2019
title	Exploration of Computational Design and Robotic Fabrication with Wire-Arc Additive Manufacturing Techniques
doi	https://doi.org/10.52842/conf.caadria.2019.1.143
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 143-152
summary	This paper discussed the exploration of computational design and robotic fabrication with Wire-Arc Additive Manufacturing techniques in a robotic metal printing workshop in Digital Futures 2018. Based on the previous research on structural-performance based design and robotic fabrication, this year's workshop mainly focused on the Wire-Arc Additive Manufacturing techniques and its possible outcomes. A prototype chair was tested for preparation. And the final target of the workshop was to build a bridge about 11m across the river. Through this metal printed bridge project, several computational optimization methods were applied to fulfill the final design. And Wire-Arc Additive Manufacturing techniques with robotic fabrication were carried out during the fabrication process.
keywords	computational design; robotic fabrication; wire-arc additive manufacturing techniques
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	acadia23_v1_166
id	acadia23_v1_166
authors	Chamorro Martin, Eduardo; Burry, Mark; Marengo, Mathilde
year	2023
title	High-performance Spatial Composite 3D Printing
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 166-171.
summary	This project explores the advantages of employing continuum material topology optimization in a 3D non-standard lattice structure through fiber additive manufacturing processes (Figure 1). Additive manufacturing (AM) has gained rapid adoption in architecture, engineering, and construction (AEC). However, existing optimization techniques often overlook the mechanical anisotropy of AM processes, resulting in suboptimal structural properties, with a focus on layer-by-layer or planar processes. Materials, processes, and techniques considering anisotropy behavior (Kwon et al. 2018) could enhance structural performance (Xie 2022). Research on 3D printing materials with high anisotropy is limited (Eichenhofer et al. 2017), but it holds potential benefits (Liu et al. 2018). Spatial lattices, such as space frames, maximize structural efficiency by enhancing flexural rigidity and load-bearing capacity using minimal material (Woods et al. 2016). From a structural design perspective, specific non-standard lattice geometries offer great potential for reducing material usage, leading to lightweight load-bearing structures (Shelton 2017). The flexibility and freedom of shape inherent to AM offers the possibility to create aggregated continuous truss-like elements with custom topologies.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	ascaad2016_019
id	ascaad2016_019
authors	Ibrahim, Magdy M.
year	2016
title	3D Printed Architecture - A new practical frontier in construction methods
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 169-178
summary	It is important to discuss and compare the rationale behind the success of the additive manufacturing technology in particular industries and at a particular scale versus full-scale building construction. The comparison should include structural qualities of the possible used materials, the cost effectiveness of the process, the time factor and its value in the construction process, the mass customization potential of the technology and its effect on building forms. The current state of technology in architecture, despite huge potential, has not produced new architectural forms.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	ijac201614403
id	ijac201614403
authors	Kontovourkis, Odysseas and George Tryfonos
year	2016
title	Design optimization and robotic fabrication of tensile mesh structures: The development and simulation of a custom-made end-effector tool
source	International Journal of Architectural Computing vol. 14 - no. 4, 333-348
summary	This article presents an ongoing research, aiming to introduce a fabrication procedure for the development of tensile mesh systems. The purpose of current methodology is to establish an integrated approach that combines digital form- finding and robotic manufacturing processes by extracting data and information derived through elastic material behavior for physical implementation. This aspires to extend the capacity of robotically driven mechanisms to the fabrication of complex tensile structures and, at the same time, to reduce the defects that might occur due to the deformation of the elastic material. In this article, emphasis is given to the development of a custom-made end-effector tool, which is responsible to add elastic threads and create connections in the form of nodes. Based on additive fabrication logic, this process suggests the development of physical prototypes through a design optimization and tool-path verification.
keywords	Robotic fabrication, tensile mesh structures, real-time response, end-effector tool, multi-objective gentic algorithms, structure optimization, form-finding
series	journal
email
last changed	2016/12/09 10:52

_id	sigradi2016_801
id	sigradi2016_801
authors	Matson, Carrie Wendt; Sweet, Kevin
year	2016
title	Simplified for Resilience: A parametric investigation into a bespoke joint system for bamboo
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.405-411
summary	Research reveals that most of the structural failures in a natural disaster are related to improper construction assembly methodologies related to human errors. This paper aims to reduce human errors in the building process by taking advantage of computational tools, and using a renewable building material. The research investigates the creation of a novel structural system for bamboo that is able to be repaired, replaced, altered, and easily assembled to restore any damaged building structure. Bamboo is an organic product with diameters that are irregular and unpredictable. The inconsistency in this natural product requires an adaptable construction methodology that responds to its organic nature. A customised joint system is created using parametric software that quickly adapts to the irregularity of the bamboo and are then fabricated using additive printing techniques. The parametric software gives unlimited control of the joint system based on the programmed relationships between the differentiations of each unique bamboo connection. Fabricating each unique joint gives a secure connection at each intersection facilitating an adaptable architecture, whilst reducing construction waste. This paper introduces the groundwork for the implementation of “on-site” manufacturing of a framework joint system. The manufacturing utilises the power and performance of a parametric platform with the technology of bespoke three-dimensionally printed joints – a flexible system that can respond to organic materials and natural external conditions
keywords	Parametric design; Three-dimensional printing; Bamboo construction
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2016_161
id	ecaade2016_161
authors	Nan, Cristina, Patterson, Charlie and Pedreschi, Remo
year	2016
title	Digital Materialization: Additive and Robotical Manufacturing with Clay and Silicone
doi	https://doi.org/10.52842/conf.ecaade.2016.1.345
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 345-354
summary	Through the use of algorithmic design methods and an ever growing variety of digital fabrication tools the complexity of process in the architectural discipline seems to be increasing. As this statement might apply to a variety of different areas of computational design and process management, this perceived growing complexity does not have to be viewed as unnecessary complication of design processes, if palpable and justifiable benefits occur. This paper intends to analyse and investigate the potential arising from digital tools of fabrication, specifically robots and 3D printers, and from open source platforms on exploring and managing complexity while enabling both simplicity of process and simplicity of implementation through emerging open source cultures. Building on this assumptions, this paper explores the professional possibilities generated the implementation of robotics as part of the academic curriculum. The theoretical concept of Machinecraft will be introduced and showcased on two research project, both focussing on advanced digital tools, additive manufacturing and machine engineering. Please write your abstract here by clicking this paragraph.
wos	WOS:000402063700039
keywords	Additive Manufacturing; 3D Printing; Robotics; Digital Fabrication; Open Source; Architectural Education
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2016_771
id	sigradi2016_771
authors	Raspall, Felix; Ba?ón, Carlos
year	2016
title	vMESH : How to print Architecture?
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.394-398
summary	The use of 3D printing in architectural research, education and practice has been almost exclusively destined to produce physical representations – models— of designed building. Recent advances in Additive Manufacturing (AM) have exponentially increased the mechanical properties of 3D printed parts, opening new opportunities for this technology to be directly applied to functional architectural components at an increasingly larger scale. Thus, this paper examines the design, structural and aesthetic implications, as well as the feasibility of advanced 3D printing technologies in the production of functional architectural components through the design and prototyping of a customized, non-regular spatial frame system.
keywords	Metal 3D Printing, Volumetric Mesh, Digital Fabrication, Parametric Design, Spatial Frames
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	ecaade2016_142
id	ecaade2016_142
authors	Rejepava, Alina, Haring, Mario and Gruber, Anna
year	2016
title	AMA - Additive Merged Appliance
doi	https://doi.org/10.52842/conf.ecaade.2016.1.179
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 179-184
summary	The production of concrete structure components is often a backbreaking process due to the inconvenient and time-consuming process of producing the formwork. Depending on the geometry, this can be a very time-consuming activity. A trial will be made to solve these problems within the manufacturing process using adapted binder jetting technology. First of all, the research will deal with the behavior of concrete as well as the bond between the cement paste and the aggregate. Various additives and grain sizes will be determined to find an appropriate result. On the other hand, different spray and drop systems will be analyzed to compare the new method and the common binder jetting setup. After fabricating some geometrical shapes manually the study is going to be continued using computer-aided manufacturing.
wos	WOS:000402063700020
keywords	3D Print ; Binder Jetting; Concrete; Robotics; Additive Fabrication
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia16_332
id	acadia16_332
authors	Retsin, Gilles; Garcia, Manuel Jimenez
year	2016
title	Discrete Computational Methods for Robotic Additive Manufacturing: Combinatorial Toolpaths
doi	https://doi.org/10.52842/conf.acadia.2016.332
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 332-341
summary	The research presented in this paper is part of a larger, emerging body of research into large-scale 3D printing. The research attempts to develop a computational design method specifically for large-scale 3D printing of architecture. Influenced by the concept of Digital Materials, this research is situated within a critical discussion of what fundamentally constitutes a digital object and process. This requires a holistic understanding, taking into account both computational design and fabrication. The intrinsic constraints of the fabrication process are used as opportunities and generative drivers in the design process. The paper argues that a design method specifically for 3D printing should revolve around the question of how to organize toolpaths for the continuous addition or layering of material. Two case-study projects advance discrete methods as efficient ways to compute a continuous printing process. In contrast to continuous models, discrete models allow users to serialize problems and errors in toolpaths. This allows a local optimization of the structure, avoiding the use of global, computationally expensive, problem-solving algorithms. Both projects make use of a voxel-based approach, where a design is generated directly from the combination of thousands of serialized toolpath fragments. The understanding that serially repeated elements can be assembled into highly complex and heterogeneous structures has implications stretching beyond 3D printing. This combinatorial approach for example also becomes highly valuable for construction systems based on modularity and prefabrication.
keywords	prgrammable materials, simulation and design optimization, digital fabrication, big data
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	caadria2016_529
id	caadria2016_529
authors	Rust, Romana; David Jenny, Fabio Gramazio and Matthias Kohler
year	2016
title	Spatial Wire Cutting: Cooperative robotic cutting of non-ruled surface geometries for bespoke building components
doi	https://doi.org/10.52842/conf.caadria.2016.529
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 529-538
summary	The research project Spatial Wire Cutting (SWC) investi- gates a multi-robotic cutting technique that allows for an efficient production of geometrically complex architectural components. Being pursued by the group of Gramazio Kohler Research at ETH Zurich, this approach involves a spatially coordinated movement of two six- axis robotic arms that control the curvature of a hot-wire, which adopts itself against the resistance of the processed material (e.g. pol- ystyrene). In contrast to standard CNC hot-wire cutting processes, in which the cutting medium remains linear, it allows the automated fab- rication of non-ruled, doubly curved surfaces. This pursuit includes the development of a custom digital design and robotic control framework that combines computational simulation and manufactur- ing feedback information. Ultimately, SWC enables a considerably expanded design and fabrication space for complex architectural ge- ometries and their construction through automated robotic technology. This paper addresses the applied workflow and technology 1) such as computational design and simulation, robotic control and adaptive fabrication, 2) results of application within a two-week design and building workshop, and 3) will conclude with further steps of future research.
keywords	Computational design and digital fabrication; feedback-based automated manufacturing; multi-robot control; digital simulation; hot-wire cutting
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2024_361
id	ecaade2024_361
authors	Sochùrková, Petra; Devyatkina, Svetlana; Kordová, Sára; Vaško, Imrich; Tsikoliya, Shota
year	2024
title	Bioreceptive Parameters for Additive Manufacturing of Clay based Composites
doi	https://doi.org/10.52842/conf.ecaade.2024.1.045
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 1, pp. 45–54
summary	Due to climate change and the problematic amount of waste and CO2 emissions in the construction industry, non-human organisms and sustainable solutions are key motivators of the study. This paper focuses on developing a bioreceptive (Guillitte, 1995) composite suitable for additive manufacturing, composed to support growth of various organisms. It investigates key properties which have shown to be beneficial for promoting biological growth, such as water absorption, water permeability, humidity, and surface texture. The study evaluates the effect of two groups of clay-based waste additives, wooden sawdust (Arslan, et al., 2021) and sediment material sourced from local tunnel excavation in Prague. Simultaneously the need for intelligent reintegration and waste use is prevalent. Additive fabrication offers the ability to test a variety of composites and (re-)integrate them into the manufacturing processes. Current approach explores how to design artificial environments/skins for greenery and small life with the potential to improve both diversity and survivability while maintaining a better climate in its immediate surroundings. Bioreceptive design has the potential to improve the quality of the urban environment and bring new aesthetic influences into it (Cruz and Beckett 2016, p. 51-64).
keywords	Digital Design, Material Research, Bioreceptive Design, Robotic Fabrication, Additive Manufacturing, Experimental Pastes, Bio compatibility, Waste Materials, Clay Composites
series	eCAADe
email
last changed	2024/11/17 22:05

_id	caadria2016_745
id	caadria2016_745
authors	Suzuki E., Seiichi
year	2016
title	Extruded Architectures: Grading weight-to-strength ratio of cement based materials through extrusion techniques
doi	https://doi.org/10.52842/conf.caadria.2016.745
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 745-754
summary	In recent years, a growing research agenda on the subject of additive manufacturing for architectural design has been established on the basis of jetting and extrusion technology. While jetting pro- vides enough flexibility to print multiple digital materials in a single run, extrusion has proven to be the most viable technique for large- scale and on-site manufacturing. Because major contributions of both research lines cannot be combined due to technological differences, special attention has been devoted towards the development of print- ing strategies that could approximate similar material flexibility of jet- ting by means of extrusion techniques. In this context, this paper pre- sents a computational design methodology for architectural components that enables grading weight-strength ratio of cement based materials through extrusion. Built upon the integration of mod- elling, analysis and fabrication, such methodology allows to optimize material distribution and geometric definition on the basis of physical and fabrication constraints. A case study is presented for describing the design processes of a circular column and the fabrication of a sec- tion it.
keywords	Additive manufacturing; cement based materials; computational design
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2016_097
id	ecaade2016_097
authors	Turunen, Heidi
year	2016
title	Additive Manufacturing and Value Creation - in Architectural Design, Design Process and End-products
doi	https://doi.org/10.52842/conf.ecaade.2016.1.103
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 103-111
summary	The objective of this paper is to clarify how value creation can be a part of architectural design and end-products when using the new emerging technology of additive manufacturing. Different kinds of values that have emerged from the research material have been analysed and summarised using selected case studies of recent building-scale projects. In applying this technique to architecture, the result can be visually and functionally novel, smarter and more sustainable buildings or products. A new individually manufactured or customised architecture can be created to serve different cultural and well-being needs cost effectively and without any waste. This new production method can lead to unique joint structures with the use of traditionally produced new or old building parts to enhance architecture, prevent climate change or aid environmental issues. However, most research projects and applications done by commercial companies are at the early stages.
wos	WOS:000402063700012
keywords	Large-scale additive manufacturing; 3D printed architecture; Digital design; New materials; New production methods
series	eCAADe
email
last changed	2022/06/07 07:58

_id	caadria2016_569
id	caadria2016_569
authors	Williams, Nicholas and Dharman Gersch
year	2016
title	Developing the Termite Plug-In: Abstracting operations to link 5-axis CNC routers with para-metric CAAD tools
doi	https://doi.org/10.52842/conf.caadria.2016.569
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 569-578
summary	Since the turn of the millennium, architects and designers have used greater access to Computer Aided Manufacturing (CAM) machines to explore links between design and fabrication. This trend is recently manifested in plug-ins for CAD software packages, which enable designers to program industrial robots and additive manufac- turing machines. However, amongst the array of contemporary tools, few connect CAD packages to commercial 5-axis routers and, as a re- sult, designers are forced to use complex CAM software to operate these machines with limited exploration of the interface with design. This paper reports on the development of a CAD plug-in for driving such routers and targeted at designers. It discusses key aspects in the conception of the software libraries for an alpha release of the tool, a plug-in for McNeel Grasshopper named Termite. Primary considera- tions for the development team include the areas and extent of flexi- bility offered in order to enable non-expert users of such machines to use them to in an effective and efficient manner. Key elements of the tools are discussed, including the definition of machining tools, the creation of generic toolpaths and the subsequent writing machine-code files. A set of example pieces are presented to demonstrate the pro- posed approach for flank-milling, patterning and connecting timber components at a furniture scale. These are compared to plug-ins for industrial robot with similar technical knowledge and experience amongst the target audience.
keywords	Digital fabrication; parametric design; architectural proto-types; digital material
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2016_043
id	ecaade2016_043
authors	Wit, Andrew and Kim, Simon
year	2016
title	rolyPOLY - A Hybrid Prototype for Digital Techniques and Analog Craft in Architecture
doi	https://doi.org/10.52842/conf.ecaade.2016.1.631
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 631-638
summary	The rapid emergence of computational design tools, advanced material systems and robotic fabrication within the disciplines of architecture and construction has granted designers immense freedom in form and assembly, while retaining pronounced control over output quality throughout the entirety of the design and fabrication process. Simultaneously, the complexity inherent within these tools and processes can lead to a loss of craft though the production of methodologies, forms and artifacts left with extremely recognizable residues from tooling processes utilized during their production. This paper investigates the fecund intersection of digital technologies and handcraft through core-less carbon fiber reinforced polymer (CFRP) winding as a means of creating a new typology of digital craft blurring the line between human and machine. Through the lens of an innovative wound CFRP shelter rolyPOLY completed during the winter of 2015, this paper will show the exigencies and affordances between the realms of digital and analog methodologies of CFRP winding on large-scale structures.
wos	WOS:000402063700068
keywords	additive manufacturing; composites; form finding; craft; analog / digital
series	eCAADe
email
last changed	2022/06/07 07:57

For more results click below: