Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1516

Reformat results as: short short into frame detailed detailed into frame

_id	acadia17_324
id	acadia17_324
authors	Kilian, Axel; Sabourin, François
year	2017
title	Embodied Computation – An Actuated Active Bending Tower: Using Simulation-Model-Free Sensor Guided Search To Reach Posture Goals
doi	https://doi.org/10.52842/conf.acadia.2017.324
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 324- 329
summary	The concept of Embodied Computation is to leverage the combination of abstract computational and material artifact as a method for exploration in the design process. A common approach for the integration of the two realms is to use computational simulation based on the geometric form of the artifact for the prediction of material behavior. This leads to the integration of a geometric model abstraction of the physical artifact into the control software of the actuated device and can produce deviations between the state of the physical construct and the computational state. Here an alternative approach of a soft, actuated, active bending structure is explored. Six fluidic actuators are combined with a six degree of freedom (DOF) sensor for posture feedback. Instead of relying on simulated kinematics to reach a particular posture, the sensor-enabled posture feedback guides a simplex search algorithm to find combinations of pressures in the six actuators that minimize the combined tilting angles for the goal of a level tower top. Rather than simulating the structure computationally, the model is shifted to one of feedback and control, and the structure operates as a physical equation solver returning an x-y-z tilting angle for every set of actuation pressures. Therefore the computational model of the search process is independent of the physical configuration of the structure itself and robust to changes in the environment or the structure itself. This has the future potential for more robust control of non-determined structures and constructs with heterogeneous DOF common in architecture where modeling behavior is difficult.
keywords	material and construction; smart buildings
series	ACADIA
email
last changed	2022/06/07 07:52

_id	caadria2017_185
id	caadria2017_185
authors	McGinley, Tim, Abroe, Brett, Kroll, David, Murphy, Matt, Sare, Tessa and Gu, Ning
year	2017
title	Agile X UniSA Pavilion: Agile Principles and the Parametric Paradox
doi	https://doi.org/10.52842/conf.caadria.2017.169
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 169-178
summary	The world is experiencing an ever increasing pace of change and yet our design processes typically follow a waterfall model that make can make change and adaptation difficult. Digital design approaches provide an opportunity to develop agile solutions that are more open to change in the design process. This paper proposes the development of immaterial architectures wherein the material expression is left to later in the design process when there is greater certainty. We describe a series of 3 workshops that employ aspects of agile software development methodologies into architecture. The workshops proposed 3 immaterial pavilions for Delft, Adelaide and Tianjin. This first cycle of three workshops resulted in the design, fabrication and installation of the Agile X UniSA Pavilion in Adelaide. This paper discusses the applicability of agile development methodologies to this process and details a series of adaptations to provide a set of appropriate agile development principles for architecture.
keywords	Agile; Architecture pavilion; Immaterial architecture; Parametric paradox; Collaboration
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	acadia17_436
id	acadia17_436
authors	Nagy, Danil; Villaggi, Lorenzo; Zhao, Dale; Benjamin, David
year	2017
title	Beyond Heuristics: A Novel Design Space Model for Generative Space Planning in Architecture
doi	https://doi.org/10.52842/conf.acadia.2017.436
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 436- 445
summary	This paper proposes a novel design space model that can be used in applications of generative space planning in architecture. The model is based on a novel data structure that allows fast subdivision and merge operations on planar regions in a floor plan. It is controlled by a relatively small set of input parameters and evaluated for performance using a set of congestion metrics, which allows it to be optimized by a metaheuristic such as a genetic algorithm (GA). The paper also presents a set of guidelines and methods for analyzing and visualizing the quality of the model through low-resolution sampling of the design space. The model and analysis methods are demonstrated through an application in the design of an exhibit hall layout. The paper concludes by speculating on the potential of such models to disrupt the architectural profession by allowing designers to break free of common "heuristics" or rules of thumb and explore a wider range of design options than would be possible using traditional methods.
keywords	design methods; information processing; simulation & optimization; generative system; data visualization
series	ACADIA
email
last changed	2022/06/07 07:59

_id	lasg_whitepapers_2019_291
id	lasg_whitepapers_2019_291
authors	Sabin, Jenny
year	2019
title	Lumen
source	Living Architecture Systems Group White Papers 2019 [ISBN 978-1-988366-18-0] Riverside Architectural Press: Toronto, Canada 2019. pp.291 - 318
summary	This paper documents the computational design methods, digital fabrication strategies, and generative design process for [Lumen], winner of MoMA & MoMA PS1’s 2017 Young Architects Program. The project was installed in the courtyard at MoMA PS1 in Long Island City, New York, during the summer of 2017. Two lightweight 3D digitally knitted fabric canopy structures composed of responsive tubular and cellular components employ recycled textiles, photo-luminescent and solar active yarns that absorb and store UV energy, change color, and emit light. This environment offers spaces of respite, exchange, and engagement as a 150 x 75-foot misting system responds to visitors’ proximity, activating fabric stalactites that produce a refreshing micro-climate. Families of robotically prototyped and woven recycled spool chairs provide seating throughout the courtyard. The canopies are digitally fabricated with over 1,000,000 yards of high tech responsive yarn and are supported by three 40+ foot tensegrity towers and the surrounding matrix of courtyard walls. Material responses to sunlight as well as physical participation are integral parts of our exploratory approach to the 2017 YAP brief. The project is mathematically generated through form-finding simulations informed by the sun, site, materials, program, and the material morphology of knitted cellular components. Resisting a biomimetic approach, [Lumen] employs an analogic design process where complex material behavior and processes are integrated with personal engagement and diverse programs. The comprehensive installation was designed by Jenny Sabin Studio and fabricated by Shima Seiki WHOLEGARMENT, Jacobsson Carruthers, and Dazian with structural engineering by Arup and lighting by Focus Lighting.
keywords	living architecture systems group, organicism, intelligent systems, design methods, engineering and art, new media art, interactive art, dissipative systems, technology, cognition, responsiveness, biomaterials, artificial natures, 4DSOUND, materials, virtual projections,
email
last changed	2019/07/29 14:02

_id	acadia18_444
id	acadia18_444
authors	Sabin, Jenny; Pranger, Dillon; Binkley, Clayton; Strobel, Kristen; Liu, Jingyang (Leo)
year	2018
title	Lumen
doi	https://doi.org/10.52842/conf.acadia.2018.444
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 444-455
summary	This paper documents the computational design methods, digital fabrication strategies, and generative design process for Lumen, winner of MoMA & MoMA PS1’s 2017 Young Architects Program. The project was installed in the courtyard at MoMA PS1 in Long Island City, New York, during the summer of 2017. Two lightweight 3D digitally knitted fabric canopy structures composed of responsive tubular and cellular components employ recycled textiles, photo-luminescent and solar active yarns that absorb and store UV energy, change color, and emit light. This environment offers spaces of respite, exchange, and engagement as a 150 x 75-foot misting system responds to visitors’ proximity, activating fabric stalactites that produce a refreshing micro-climate. Families of robotically prototyped and woven recycled spool chairs provide seating throughout the courtyard. The canopies are digitally fabricated with over 1,000,000 yards of high tech responsive yarn and are supported by three 40+ foot tensegrity towers and the surrounding matrix of courtyard walls. Material responses to sunlight as well as physical participation are integral parts of our exploratory approach to the 2017 YAP brief. The project is mathematically generated through form-finding simulations informed by the sun, site, materials, program, and the material morphology of knitted cellular components. Resisting a biomimetic approach, Lumen employs an analogic design process where complex material behavior and processes are integrated with personal engagement and diverse programs. The comprehensive installation was designed by Jenny Sabin Studio and fabricated by Shima Seiki WHOLEGARMENT, Jacobsson Carruthers, and Dazian with structural engineering by Arup and lighting by Focus Lighting.
keywords	full paper, materials & adaptive systems, digital fabrication, flexible structures, performance + simulation
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	caadria2017_030
id	caadria2017_030
authors	Wang, Shuo, Zhao, Yuezhe and Wu, Shuoxian
year	2017
title	Seat Selection System for Theatres and Concert Halls Based on Audio-Visual Integration Technology
doi	https://doi.org/10.52842/conf.caadria.2017.157
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 157-165
summary	It is of great significance to establish the virtual visual/audio simulation in building environment or indoor auditorium, as this is also a key issue which has drawn attention from other research fields including computer-aided design, virtual reality and acoustic simulation. This paper introduces the architecture and realization of a seat selection system based on audio-visual integration technology and the subjective preference test based on the seat selection system. The visual/audio subjective evaluation experiments on Xiamen Concert Hall and Ferrara Opera House were carried out, the experiments show that visual-audio factors have impact on the visual-audio preference and subjective evaluation of concert halls and theatres. The combined effect of acoustic and non-acoustic parameters (such as visual factors) on hearing and the perception of acoustics is also discussed in the paper.
keywords	Virtual Building Environment; Audio-Visual Integration; Subjective Preference of Seats
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	caadria2018_209
id	caadria2018_209
authors	Yao, Jiawei, Lin, Yuqiong, Zhao, Yao, Yan, Chao, Li, Changlin and Yuan, Philip F.
year	2018
title	Augmented Reality Technology based Wind Environment Visualization
doi	https://doi.org/10.52842/conf.caadria.2018.1.369
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 369-377
summary	Considering the outdoor environment at the initial stage of design process plays a significant role on future building performance. Augmented Reality (AR) technology applied in this research can integrate real world building morphology information and virtual world ventilation information seamlessly that rapidly and directly provides designers information for observation and evaluation. During the case study of "2017 Shanghai DigitalFUTURE" summer workshop, a research on augmented reality technology based wind environment visualization was carried on. The achievement with an application software not only showed the geometric information of the real world objects (such as buildings), but also the virtual wind environment has displayed. Thus, these two kinds of information can complement and superimpose each other. This AR technology based software brings multiple synthetic together, which can (1) visualize the air flow around buildings that provides designers rapid and direct information for evaluation; (2) deal with wind-environment-related data quantitatively and present in an intuitive, easy-to-interpret graphical way; and (3) be further developed as a visualization system based on built-in environments in the future, which contributes to rapid evaluation of a series of programs at the beginning of the building design.
keywords	Environment visualization; Augmented reality technology; Fast response; Outdoor ventilation
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	acadia17_18
id	acadia17_18
authors	Abdel-Rahman, Amira; Michalatos, Panagiotis
year	2017
title	Magnetic Morphing
doi	https://doi.org/10.52842/conf.acadia.2017.018
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 18-27
summary	In an attempt to design shape-morphing multifunctional objects, this thesis uses programmable matter to design self-organizing multi-agent systems capable of morphing from one shape into another. The research looks at various precedents of self-assembly and modular robotics to design and prototype passive agents that could be cheaply mass-produced. Intelligence will be embedded into these agents on a material level, designing different local interactions to perform different global goals. The initial exploratory study looks at various examples from nature like plankton and molecules. Magnetic actuation is chosen as the external actuation force between agents. The research uses simultaneous digital and physical investigations to understand and design the interactions between agents. The project offers a systemic investigation of the effect of shape, interparticle forces, and surface friction on the packing and reconfiguration of granular systems. The ability to change the system state from a gaseous, liquid, then solid state offers new possibilities in the field of material computation, where one can design a "material" and change its properties on demand.
keywords	material and construction; construction/robotics; smart materials; smart assembly/construction; simulation & optimization
series	ACADIA
email
last changed	2022/06/07 07:52

_id	caadria2017_131
id	caadria2017_131
authors	Abe, U-ichi, Hotta, Kensuke, Hotta, Akito, Takami, Yosuke, Ikeda, Hikaru and Ikeda, Yasushi
year	2017
title	Digital Construction - Demonstration of Interactive Assembly Using Smart Discrete Papers with RFID and AR codes
doi	https://doi.org/10.52842/conf.caadria.2017.075
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 75-84
summary	This paper proposes and examines a new way of cooperation between human workers and machine intelligence in architectural scale construction. For the transfer of construction information between the physical and digital world, mature technologies such as Radio Frequency IDentifier (RFID), and emerging technologies like Augmented Reality (AR) are used in parallel to supplement each other. Dynamic data flow is implemented to synchronize digital and physical models by following the ID signatures of individual building parts. The contributions of this paper includes the demonstration of current technological limitations, and the proposal of a hybrid system between human and computer, which is tested in order to explore the possibilities of digitally enhanced construction methods.
keywords	Digital Construction; Augmented Reality; Human-Machine interaction
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2017_054
id	ecaade2017_054
authors	Abramovic, Vasilija, Glynn, Ruairi and Achten, Henri
year	2017
title	ROAMNITURE - Multi-Stable Soft Robotic Structures
doi	https://doi.org/10.52842/conf.ecaade.2017.1.327
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 327-336
summary	The rise in robotics is not only changing fabrication research in architecture but increasingly providing opportunities for animating the materiality of architecture, offering responsive, performative and adaptive design possibilities for the built environment. A fundamental challenge with robotics is its suitability to safe, and comfortable use in proximity to the human body. Here we present the preliminary results of the Roamniture Project, a hybrid approach to developing kinetic architecture based on a combination of rigid and soft body dynamics.
keywords	Kinetic Architecture; Soft Robotics; Soft Architecture; Furniture
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
doi	https://doi.org/10.52842/conf.acadia.2021.530
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	ijac201715301
id	ijac201715301
authors	Afsari, Kereshmeh; Charles Eastman and Dennis Shelden
year	2017
title	Building Information Modeling data interoperability for Cloud-based collaboration: Limitations and opportunities
source	International Journal of Architectural Computing vol. 15 - no. 3, 187-202
summary	Collaboration within Building Information Modeling process is mainly based on the manual transfer of document files in either vendor-specific formats or neutral format using Industry Foundation Classes. However, since the web enables Cloud-based Building Information Modeling services, it provides an opportunity to exchange data with web technologies. Alternative data sharing solutions include the federation of Building Information Modeling models and an interchange hub for data exchange in real time. These solutions face several challenges, are vendor locked, and integrate Building Information Modeling applications to a third new system. The main objective of this article is to investigate current limitations as well as opportunities of Cloud interoperability to outline a framework for a loosely coupled network-based Building Information Modeling data interoperability. This study explains that Cloud-Building Information Modeling data exchange needs to deploy major components of Cloud interoperability such as Cloud application programming interfaces, data transfer protocols, data formats, and standardization to redefine Building Information Modeling data flow in Cloud-based applications and to reshape collaboration process.
keywords	Building Information Modeling, Cloud, data exchange, interoperability, Industry Foundation Classes
series	journal
email
last changed	2019/08/07 14:03

_id	caadria2017_147
id	caadria2017_147
authors	Agirachman, Fauzan Alfi, Ozawa, Yo, Indraprastha, Aswin, Shinozaki, Michihiko, Sitompul, Irene Debora Meilisa, Nuraeni, Ruri, Chirstanti, Augustine Nathania, Putra, Andrew Cokro and Zefanya, Teresa
year	2017
title	Reimagining Braga - Remodeling Bandung's Historical Colonial Streetscape in Virtual Reality
doi	https://doi.org/10.52842/conf.caadria.2017.023
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 23-32
summary	This paper presents the experience of the first phase of remodeling existing historical and colonial district in Bandung, Indonesia, including existing building façade, streetscape and street furniture. Braga Street is chosen as study case because it is a well-known historical street in Bandung with art deco style buildings constructed during Dutch colonial era. By remodeling it, it could help stakeholders to evaluate existing Braga street condition, to test any modification of buildings along the street and to determine specific regulation for the street. In this case, we use Unity3D and Oculus Rift DK2 for remodeling current situation. We gathered feedback from respondents using a questionnaire given after they experienced the model in VR. Many lessons learned from modeling process and respondents' feedback: higher frame rate to make seamless VR experience by having all components on a low poly model and provide smoother movement to prevent visual discomfort. This paper's conclusion gives suggestions for anyone who want to start architecture modeling in virtual reality for the very first time and how to optimize it.
keywords	Virtual reality; historical building; digital reconstruction; streetscape
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ijac201715203
id	ijac201715203
authors	Agirbas, Asli and Emel Ardaman
year	2017
title	Macro-scale designs through topological deformations in the built environment
source	International Journal of Architectural Computing vol. 15 - no. 2, 134-147
summary	Design studies are being done on contemporary master-plans which may be applied in many locations worldwide. Advances in information technology are becoming the base model of design studies, and these may be more effective than the efforts of humans in the field of architecture and urban design. However, urban morphology variables and constants must be considered while designing contemporary master-plans in the existing built environment. The aims of this study were to extend the use of computer software for different applications and to make a topological work in the regional context. Accordingly, a case study was made using the nCloth simulation tools to create non-Euclidean forms while protecting the road system, which is one of the constant parameters of urban morphology in the built environment.
keywords	Conceptual design, built environment, simulation, contemporary master-plans, urban morphology, topology
series	other
type	normal paper
email
last changed	2019/08/02 08:30

_id	ecaade2017_021
id	ecaade2017_021
authors	Agirbas, Asli
year	2017
title	The Use of Simulation for Creating Folding Structures - A Teaching Model
doi	https://doi.org/10.52842/conf.ecaade.2017.1.325
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 325-332
summary	In architectural education, the demand for creating forms with a non-Euclidean geometry, which can only be achieved by using the computer-aided design tools, is increasing. The teaching of this subject is a great challenge for both students and instructors, because of the intensive nature of architecture undergraduate programs. Therefore, for the creation of those forms with a non-Euclidean geometry, experimental work was carried out in an elective course based on the learning visual programming language. The creation of folding structures with form-finding by simulation was chosen as the subject of the design production which would be done as part of the content of the course. In this particular course, it was intended that all stages should be experienced, from the modeling in the virtual environment to the digital fabrication. Hence, in their early years of architectural education, the students were able to learn versatile thinking by experiencing, simultaneously, the use of simulation in the environment of visual programming language, the forming space by using folding structures, the material-based thinking and the creation of their designs suitable to the digital fabrication.
keywords	Folding Structures; CAAD; Simulation; Form-finding; Architectural Education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2017_249
id	cf2017_249
authors	Agirbas, Asli
year	2017
title	Teaching Design by Coding in Architecture Undergraduate Education: A Case Study with Islamic Patterns
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 249-258.
summary	Computer-aided design has found its role in the undergraduate education of architects, and presently design by coding is also gradually finding further prominence in accord with the increasing demand by students who wish to learn more about this topic. This subject is included in an integrated manner in some studio courses on architecture design in some schools, or it is taught separately in elsewhere. In terms of the separate course on coding, the principal difficulty is that actual applications of the method can rarely be included due to time limitations and the fact that it is conducted separately from the studio course on architecture. However, within the framework of the architectural education, in order to learn about the coding it is necessary to consider it along with the design process, and this versatile thinking can only be achieved by the application of the design. In this study, an elective undergraduate course is considered in the context of design and to yield a versatile thinking strategy while learning the language of visual programming. The course progressed under the theoretical framework of shape grammar from the design stage through to the digital fabrication process, and the experimental studies were carried out on the selected topic of Islamic pattern. A method was proposed to improve the productivity of such courses, and an evaluation of the results is presented.
keywords	Islamic Patterns, Shape Grammars, Architectural Education, Parametric Design, CAAD.
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	acadia17_28
id	acadia17_28
authors	Aguiar, Rita; Cardoso, Carmo; Leit?o,António
year	2017
title	Algorithmic Design and Analysis Fusing Disciplines
doi	https://doi.org/10.52842/conf.acadia.2017.028
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 28-37
summary	In the past, there has been a rapid evolution in computational tools to represent and analyze architectural designs. Analysis tools can be used in all stages of the design process, but they are often only used in the final stages, where it might be too late to impact the design. This is due to the considerable time and effort typically needed to produce the analytical models required by the analysis tools. A possible solution would be to convert the digital architectural models into analytical ones, but unfortunately, this often results in errors and frequently the analytical models need to be built almost from scratch. These issues discourage architects from doing a performance-oriented exploration of their designs in the early stages of a project. To overcome these issues, we propose Algorithmic Design and Analysis, a method for analysis that is based on adapting and extending an algorithmic-based design representation so that the modeling operations can generate the elements of the analytical model containing solely the information required by the analysis tool. Using this method, the same algorithm that produces the digital architectural model can also automatically generate analytical models for different types of analysis. Using the proposed method, there is no information loss and architects do not need additional work to perform the analysis. This encourages architects to explore several design alternatives while taking into account the design’s performance. Moreover, when architects know the set of design variations they wish to analyze beforehand, they can easily automate the analysis process.
keywords	design methods; information processing; simulation & optimization; BIM; generative system
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaade2017_085
id	ecaade2017_085
authors	Agustí-Juan, Isolda, Hollberg, Alexander and Habert, Guillaume
year	2017
title	Integration of environmental criteria in early stages of digital fabrication
doi	https://doi.org/10.52842/conf.ecaade.2017.2.185
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 185-192
summary	The construction sector is responsible for a big share of the global energy, resource demand and greenhouse gas emissions. As such, buildings and their designers are key players for carbon mitigation actions. Current research in digital fabrication is beginning to reveal its potential to improve the sustainability of the construction sector. To evaluate the environmental performance of buildings, life cycle assessment (LCA) is commonly employed. Recent research developments have successfully linked LCA to CAD and BIM tools for a faster evaluation of environmental impacts. However, these are only partially applicable to digital fabrication, because of differences in the design process. In contrast to conventional construction, in digital fabrication the geometry is the consequence of the definition of functional, structural and fabrication parameters during design. Therefore, this paper presents an LCA-based method for design-integrated environmental assessment of digitally fabricated building elements. The method is divided into four levels of detail following the degree of available information during the design process. Finally, the method is applied to the case study "Mesh Mould", a digitally fabricated complex concrete wall that does not require any formwork. The results prove the applicability of the method and highlight the environmental benefits digital fabrication can provide.
keywords	Digital fabrication; Parametric LCA; Early design; Sustainability
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia17_38
id	acadia17_38
authors	Ahlquist, Sean; McGee, Wes; Sharmin, Shahida
year	2017
title	PneumaKnit: Actuated Architectures Through Wale- and Course-Wise Tubular Knit-Constrained Pneumatic Systems
doi	https://doi.org/10.52842/conf.acadia.2017.038
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 38-51
summary	This research explores the development of seamless pneumatically actuated systems whose motion is controlled by the combination of differentially knitted textiles and standardized thin-walled silicone tubing. This work proposes a fundamental material strategy that addresses challenges ranging from soft robotics to pneumatic architecture. Research in soft robotics seeks to achieve complex motions through non-mechanical monolithic systems, comprised of highly articulated shapes molded with a combination of elastic and inelastic materials. Inflatables in architecture focus largely on the active structuring of static forms, as facade systems or as structured envelopes. An emerging use of pneumatic architecture proposes morphable, adaptive systems accomplished through differentiated mechanically interconnected components. In the research described in this paper, a wide array of capabilities in motion and geometric articulation are accomplished through the design of knitted sleeves that generate a series of actuated “elbows.” As opposed to molding silicone bladders, differentiation in motion is generated through the more facile ability of changing stitch structure, and shaping of the knitted textile sleeve, which constrains the standard silicone tubing. The relationship between knit differentiation, pneumatic pressure, and the resultant motion profile is studied initially with individual actuators, and ultimately in propositions for larger seamless assemblies. As opposed to a cellular study of individual components, this research proposes structures with multi-scalar articulation, from fiber and stitch to overall form, composed into seamless, massively deformable architectures.
keywords	material and construction; fabrication; construction/robotics
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia17_52
id	acadia17_52
authors	Ajlouni, Rima
year	2017
title	Simulation of Sound Diffusion Patterns of Fractal-Based Surface Profiles
doi	https://doi.org/10.52842/conf.acadia.2017.052
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 52-61
summary	Acoustical design is one of the most challenging aspects of architecture. A complex system of competing influences (e.g., space geometry, size, proportion, material properties, surface detail, etc.) contribute to shaping the quality of the auditory experience. In particular, architectural surfaces affect the way that sound reflections propagate through space. By diffusing the reflected sound energy, surface designs can promote a more homogeneous auditory atmosphere by mitigating sharp and focused reflections. One of the challenges with designing an effective diffuser is the need to respond to a wide band of sound wavelengths, which requires the surface profile to precisely encode a range of detail sizes, depths and angles. Most of the available sound diffusers are designed to respond to a narrow band of frequencies. In this context, fractal-based surface designs can provide a unique opportunity for mitigating such limitations. A key principle of fractal geometry is its multilevel hierarchical order, which enables the same pattern to occur at different scales. This characteristic makes it a potential candidate for diffusing a wider band of sound wavelengths. However, predicting the reflection patterns of complicated fractal-based surface designs can be challenging using available acoustical software. These tools are often costly, complicated and are not designed for predicting early sound propagation paths. This research argues that writing customized algorithms provides a valuable, free and efficient alternative for addressing targeted acoustical design problems. The paper presents a methodology for designing and testing a customized algorithm for predicting sound diffusion patterns of fractal-based surfaces. Both quantitative and qualitative approaches were used to develop the code and evaluate the results.
keywords	design methods; information processing; simulation & optimization; data visualization
series	ACADIA
email
last changed	2022/06/07 07:54

For more results click below: