Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 17626

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2015_10.377
id	sigradi2015_10.377
authors	Lima, Pedro Gabriel de Sousa; Sousa, Débora de Oliveira; Romcy, Neliza Maria e Silva
year	2015
title	Epistemological basis to a contemporary approach for design teaching. The digital media, the reflective professional and the paradigm shift
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 602-608.
summary	We now live on the digital era. Technological innovations don’t stop to come to light, and our society little by little become more permeable and sensible to the present-day. The architect who refuses to just repeat architecture styles enters in a avant-garde position and gives intellectual impulses towards finding through your work a original proposal that will answer in fact the demands of a society that is correlate with your present-time. How to teach him to deal with the novel situations of the digital era and the paradigms to be used as basis and how should be the new pedagogical structure?
keywords	Digital Media, Parametric Architecture, Design Teaching, Digital Fabrication, Re ection-in-action
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2009_779
id	sigradi2009_779
authors	Lima, Thais Borges Sanches; Cláudia Naves David Amorim; Giselle Marie Cormier Chaim
year	2009
title	Simulação do Desempenho Energético de Edifícios de Escritórios em Brasília [Energy performance simulation of Brasília’s office buildings]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This paper presents a parametric analysis where WWR and color glass was varied to determine their influence in the thermal performance of an office building’s room. Design Builder tool was used to calculate the thermal load and the internal gains. The WWR variation in different orientations resulted in a significant increase of the thermal load. The reflective glass allowed a better thermal performance of the room. With the use of computer simulation was possible to analyse many constructive and design characteristics of the facade and its influence on the results, when considered together.
keywords	Energy performance; office buildings; computer simulation; Design Builder
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	cf2005_2_37_117
id	cf2005_2_37_117
authors	LIN Chieh-Yen and CHIU Mao-Lin
year	2005
title	The Concept Space Explorer
source	Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 139-148
summary	Design is often initiated by some ideas or concepts to form the design process, while design cases provide the impetus for design inspiration and conception. This paper is aimed at establishing a knowledge retrieval mechanism based on design concepts and their semantic relations. This research is based on a case library (CBA) implemented on the web as a repository of house cases and a learning environment for case-based design. The implementation and discussion is presented.
keywords	design knowledge, semantic web, ontology, concept space, case library
series	CAAD Futures
email
last changed	2005/05/05 07:06

_id	caadria2023_304
id	caadria2023_304
authors	Lin, Bing-Xuan and Hou, June-Hao
year	2023
title	Design of Bistable Deployable Scissor Structures Consisting of Translational Units Based on Flat Retraction Logic
doi	https://doi.org/10.52842/conf.caadria.2023.2.541
source	Immanuel Koh, Dagmar Reinhardt, Mohammed Makki, Mona Khakhar, Nic Bao (eds.), HUMAN-CENTRIC - Proceedings of the 28th CAADRIA Conference, Ahmedabad, 18-24 March 2023, pp. 541–550
summary	The subject of this research is the study of the retraction change mode of deployable scissor grids based on the Hoberman mechanism. The retraction logic of this type of flat mechanism can be changed mainly by moving the pivot point of the rod and using bistable deployable scissor structures consisting of translational units. Therefore, the mechanism can remain flat while it retracts, and the irregular translational units allow for a greater variety of surface variations in the shape of the mechanism. Through the study of the scissor system, a simplified mathematical model is used to explore the geometric potential, and a formula for complete flat retraction is derived. Following the input of defined data using digital tools, the remaining translational scissor units that conform to the retraction logic are generated. Then, irregular linkage mechanisms are created that can retract from 3D to 2D, with the opening mode not being limited to the radial sphere or other mean geometries. These results provide a unique retraction mode for deployable scissor grids, thus facilitating the collection and transportation of such mechanisms in practical applications.
keywords	flat retraction logic, geometric design, translational units, pivot point, bistable deployable scissor structures
series	CAADRIA
email
last changed	2023/06/15 23:14

_id	caadria2024_91
id	caadria2024_91
authors	Lin, Bo-Young and Lin, Wei
year	2024
title	A Parametric Method in Room Acoustics Simulation With Performance Verification: Real-Time Ray Tracing Techniques in Parametric Modeling
doi	https://doi.org/10.52842/conf.caadria.2024.1.405
source	Nicole Gardner, Christiane M. Herr, Likai Wang, Hirano Toshiki, Sumbul Ahmad Khan (eds.), ACCELERATED DESIGN - Proceedings of the 29th CAADRIA Conference, Singapore, 20-26 April 2024, Volume 1, pp. 405–414
summary	Since not all architectural projects can be involved in performance design calculations or optimizations, this study aims to reduce user technical barriers and enhance the visualization of the evaluation process. This paper introduces a parametric approach to room acoustics simulation, offering an interactive interface for modeling and simulation. By using Rhino-Grasshopper as a real-time ray tracing interface, both the Image Source Method (ISM) and Early Scattered Method (ESM) are employed for ray particle rebound tracking and analysis. The feasibility and analysis of spatial acoustic assessment tools are explored through the combination of data visualization and open-source parameter design meth. This research diversifies spatial models using various modeling tools like Revit, ArchiCAD 25, Rhinoceros 3ds, and SketchUp. This approach enables the evaluation of the effects and disparities caused by different modeling systems on simulation calculations. Furthermore, this paper also highlights the potential optimization of the Building Information Modeling (BIM) design workflow process. The results underscore the relationship between improved simulation accuracy and the utilization of numerical calculations, referencing benchmark simulation software ODEON for data comparison and review.
keywords	room acoustics simulation, parametric modeling, rhino-grasshopper, real-time analysis, ray tracing methods, SDG 9
series	CAADRIA
email
last changed	2024/11/17 22:05

_id	fc4f
authors	Lin, C.Y.
year	2002
title	A Place Where People Are Free to Move: Exploring Dynamic Texture Mapping in Computer Graphic Systems
doi	https://doi.org/10.52842/conf.caadria.2002.117
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 117-122
summary	Recent studies, both collaborative design system and scenario scripting, attempt to explore further CG media. Corbusier pointed out that good architecture is a place where people can walk unrestrainedly and feel free in spirit. However, it is apparent that the human figures are still in animation, whereas they are free to move in the real world. The human figure always plays an important role in the development of design media. The objective of this paper is to develop a new design method using CG media and to study the process of dynamic human texture mapping within the CG. This research conducted a design experiment using computer as the sole design medium. The results show that the new design method not only altered the behavior of the designer, but also impacted design thinking cognition.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2021_127
id	caadria2021_127
authors	Lin, Chaohe and Lo, Tian Tian
year	2021
title	Expanding the Methods of Human-VR Interaction (HVRI) for Architectural Design Process
doi	https://doi.org/10.52842/conf.caadria.2021.2.173
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 2, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 173-182
summary	The emergence of virtual reality technology now brings the possibility of new design methods. Virtual reality technology allows architects to feel space better and express design ideas more intuitively. With the interactive perception equipment and VR glasses, geometric shapes can be created and modified in a virtual environment, replacing the mouse and keyboard to complete the creation of space in the early stage of the design process. At present, the application of virtual reality in the architectural design process has some problems include unnatural interaction, low accuracy, high work cost. This paper will summarize the interactive methods of virtual reality technology in various current cases and compare the input and output of the device by analyzing the matrix method. We can explore interactions that are beneficial to architectural design. Using these interactive methods, we can expand the interface relationship between humans and the virtual environment.
keywords	HCI; HVRI; Interaction; Digital Architecture Design; Virtual Reality
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2021_081
id	ecaade2021_081
authors	Lin, Chaohe, Lo, Tiantian and Hu, Xinchuang
year	2021
title	Exploring the Possibilities of a Virtual Reality Aided Architectural Design System
doi	https://doi.org/10.52842/conf.ecaade.2021.2.555
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 555-564
summary	Creating a visual 3D model is a vital part of the architectural design process. In architectural scenes, immersion is important to perceive the connection between various aspects. The general interaction cannot meet the needs of immersion. The immersion and interaction of virtual reality (VR) allows architects to feel and design spaces better. However, VR is currently mainly used only for visualization and walkthrough of the architectural space. The design process is still done using modeling software. This paper proposes a method of architectural design in virtual reality, allowing designers to experience the model created in real-time and improve the design. The use of visual mesh positioning and ray limits can help users create accurate architectural models. The paper also applied the innovative design method to the participatory design process and showed that architectural design in virtual reality can improve design quality and better meet the needs of users.
keywords	Digital Architecture Design; Interaction; Virtual Reality; Design tool; Virtual modeling
series	eCAADe
email
last changed	2022/06/07 07:59

_id	f55c
authors	Lin, Cheng-Yuan
year	2001
title	A digital procedure of building construction: A practical project
doi	https://doi.org/10.52842/conf.caadria.2001.459
source	CAADRIA 2001 [Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6] Sydney 19-21 April 2001, pp. 459-468
summary	The process of building electric-mechanical design held only by shop drawings now. The physical models were rarely used in this field. This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. This paper foresees that digital models will become an indispensable tool for building electric-mechanical design, in the near future.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade03_033_55_lin
id	ecaade03_033_55_lin
authors	Lin, Cheng-Yuan
year	2003
title	Introducing Virtual Reality CAVE into Non-geometrically Curved Space Design
doi	https://doi.org/10.52842/conf.ecaade.2003.033
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 33-36
summary	Digital models can make visible non-geometrically curved space, and in this wayso doing realize the artistic/abstract conceptions of the designer. However, the question as to whether or not geometrically curved space can actually serve as the original design concept remains an unanswered question. This research aims to explore the relationship between virtual reality CAVE and the design of non-geometrically curved interior space. In this paper we make use of the PC-based virtual reality CAVE system — which is aimed at the design of large-scale interior space. It is possible that VR CAVE provides solutions to the problems inherent in non-geometrically curved space design.
keywords	Virtual Reality; CAVE; non-geometrically curved space
series	eCAADe
email
more	http://www.arch.nctu.edu.tw/~gage/
last changed	2022/06/07 07:59

_id	cf2003_m_032
id	cf2003_m_032
authors	LIN, Chieh-Jen and CHIU, Mao-Lin
year	2003
title	Smart Semantic Query of Design Information in a Case Library
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 125-136
summary	This paper is aimed to establish a smart query mechanism based on the semantic relationship among design cases in a case library, Case Base for Architecture (CBA). A case is composed with three levels of design information: “general”, “analytical” and “recommendation”. The data mining technique is applied to analyse the case information of CBA and extract a list of keywords of design concepts and knowledge from the analytic information and recommendation. By clustering and ranking the semantic relations of those keywords on the strength of machine and addressing them to selected design cases, we can organise the semantic relations among cases. Based on the results, we build a primary query interface to help users to retrieve and inspire their associative reasoning for design thinking. The semantic query mechanism is presented and discussed.
keywords	associative reasoning, case-based reasoning, data mining, design case, semantic
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	caadria2016_435
id	caadria2016_435
authors	Lin, Chieh-Jen
year	2016
title	The STG Pattern: Application of a “Semantic-Topological-Geometric” Information Conversion Pattern to Knowledge Modeling in Architectural Conceptual Design
doi	https://doi.org/10.52842/conf.caadria.2016.435
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 435-444
summary	Generative modelling tools have become a popular means of composing algorithms to generate complex building forms at the conceptual design stage. However, composing algorithms in order to meet the requirements of general design criteria, and communicating those criteria with other disciplines by means of generative algorithms still faces technical challenges. This paper proposes the use of a “Se- mantic-Topological-Geometric (STG)” pattern to guide architects in composing algorithms for representing, modelling, and validating de- sign knowledge and criteria. The STG pattern aims to help architects for converting semantic information concerning the situations of a project into design criteria, which are usually composed of topological relations among design elements, in order to explore the geometric properties of building components by means of generated 3D models.
keywords	Generative modelling; design criteria; design pattern; semantic ontology; BIM
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2003_b2-3
id	caadria2003_b2-3
authors	Lin, Chieh-Jen and Chiu, Mao-Lin
year	2003
title	Information Mining within a Case Library Visual Links of Correlation among Cases
doi	https://doi.org/10.52842/conf.caadria.2003.249
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 249-262
summary	This paper is aimed to establish the visual links of correlations among design cases in a case library for architecture, CBA. The study found that the keywords extracted from cases usually present certain information related to design concept, knowledge, problems or situations; and therefore, the links of those keywords can represent the correlations of those concepts or knowledge. Then the links of keywords can help users to understand the correlation between those concept or knowledge and further to prompt the correlation of cases where contain the design concepts or knowledge. Based on the previous works, the collected cases are clustered by the semantic relationships of keywords extracted from cases and the links of cases are presented with the links of keywords. Furthermore, the links of those keywords and the ranking of those linkages can be visualized to represent the correlation among cases for helping users to retrieve appropriate cases and facilitate associative reasoning based on the information embedded in those cases. The interface implementation and feedbacks are discussed.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2010_014
id	caadria2010_014
authors	Lin, Chieh-Jen and Mao-Lin Chiu
year	2010
title	Spatial topology retrieval: a visual approach for representing and retrieving spatial topology in a case library
doi	https://doi.org/10.52842/conf.caadria.2010.147
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 147-154
summary	This paper aims to develop a visual tool named Spatial Topology Retrieval (STR) for integrating a physical-based spatial allocation tool, which offers a visual interactive interface for architectural space layout in early design stage, into an online case library, which is based on rational database technology with ontology-based authoring tools of metadata of case features. STR services the case library as a tool for representing and retrieving the plane views of a design case.
keywords	Case-based design; case library; knowledge representation; implicit knowledge; spatial topology
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2009_087
id	caadria2009_087
authors	Lin, Chieh-Jen
year	2009
title	Smart Topology
doi	https://doi.org/10.52842/conf.caadria.2009.451
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 451-460
summary	This paper describes a prototype of an intuitive tool named Smart Topology for the architectural space allocation in the early design phase. Smart Topology focuses on the manipulations of virtual spaces and can build and operate the topological relation among them by instantly modifying the geometric properties of spatial allocation so as to comply with the topological relation defined by the user. Based on a prototype of an interactive tool for the spatial allocation named Spatial Layout Game (SLG), Smart Topology adds more topological operations into SLG, such as the connective, combining, orientating, and opening. It also tracks the manipulating process and results by applying the database technology.
keywords	Spatial allocation; spatial topology; knowledge representation; intuitive manipulation
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	cf2009_342
id	cf2009_342
authors	Lin, Chieh-Jen
year	2009
title	Smart topological geometry: An interactive tool for coordination of spatial topology and geometry
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 342-352
summary	This paper describes a prototype of an interactive tool named Smart Topology Geometry (STG) for coordination between spatial topology and geometry in the early design phase. STG focuses on the manipulations of virtual spaces and can manipulate the topological relations among them by instantly modifying the geometric properties of spaces so as to comply with the topological relation defined by the user.
keywords	Spatial allocation, spatial topology, interactive manipulation and design representation
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	caadria2011_051
id	caadria2011_051
authors	Lin, Chieh-Jen
year	2011
title	Topology pattern mining: A visual approach for representing and retrieving design patterns of spatial topology in a case library
doi	https://doi.org/10.52842/conf.caadria.2011.535
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 535-544
summary	This paper aims to apply the clustering analysis algorithm to analyze and classify the pattern of spatial topology of floor plans within a case library named “Open Case Study (OCS)”. Based on the results of classifications, this paper proposes a visual interface named “Topology Pattern Mining (TPM)” to present and rank searching results in response to user’s queries. The purpose of TPM is to extend the capacity of OCS for representing implicit knowledge of spatial topology. TPM can retrieve and classify design patterns of spatial topology, and thereby helps users to learn the design knowledge within relevant cases.
keywords	Case-based design; case library; knowledge representation; spatial topology; data mining
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2014_506
id	caadria2014_506
authors	Lin, Chieh-Jen
year	2014
title	Architectural Knowledge Modeling
doi	https://doi.org/10.52842/conf.caadria.2014.925
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 925–926
series	CAADRIA
type	poster
email
last changed	2022/06/07 07:59

_id	caadria2015_069
id	caadria2015_069
authors	Lin, Chieh-Jen
year	2015
title	Design Criteria Modeling
doi	https://doi.org/10.52842/conf.caadria.2015.479
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 479-488
summary	This paper proposed an ontology-based parametric modeling tool, “Design Criteria Modeling (DCM),” which applies a graphic predicative tool and semantic ontologies of architectural topology. DCM was intended to help architects in representing, exploring, and validating design criteria with parametric 3D model at the early design stage. By applying a reasoner of semantic ontology, architects could use DCM to determine whether conceptual models meet the semantic ontology of proposed design criteria.
keywords	Architectural information modeling; architectural design criteria; semantic ontology; parametric design.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2009_097
id	caadria2009_097
authors	Lin, Chieh-Jen; Mao-Lin Chiu
year	2009
title	Open Case Study
doi	https://doi.org/10.52842/conf.caadria.2009.393
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 393-399
summary	The aim of the paper is to establish an ontology-based case encoding tool with sufficient formalization and expansibility to assist users for organizing the case information and increasing the feasibility of the design knowledge in a case library. The tool is named Open Case Study (OCS). OCS is a formalized and expandable tool for authoring metadata of a case library and organizing them by their semantic ontology. By using the templates constructed by design experts, such as design teachers or experienced architects, OCS provides the user with explicit but adaptable guidelines for case analysis and encoding. OCS then performs the searching and mapping function provided by Open Ontology. Thus, when the user is encoding the information segments of cases, relevant knowledge chunks in the case library can then be immediately provided, such as relevant senses in similar cases, all atoms of a relevant sense, and known value ranges of a relevant property. This assists users to avoid data mistake and duplication in encoding design cases.
keywords	Case library; design knowledge; knowledge representation; semantic ontology; and metadata
series	CAADRIA
email
last changed	2022/06/07 07:59

For more results click below: