Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 3259

Reformat results as: short short into frame detailed detailed into frame

_id	acadia18_286
id	acadia18_286
authors	Claire Im, Hyeonji; AlOthman, Sulaiman; García del Castillo, Jose Luis
year	2018
title	Responsive Spatial Print. Clay 3D printing of spatial lattices using real-time model recalibration
doi	https://doi.org/10.52842/conf.acadia.2018.286
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 286-293
summary	Additive manufacturing processes are typically based on a horizontal discretization of solid geometry and layered deposition of materials, the speed and the rate of which are constant and determined by the stability criteria. New methods are being developed to enable three-dimensional printing of complex self-supporting lattices, expanding the range of possible outcomes in additive manufacturing. However, these processes introduce an increased degree of formal and material uncertainty, which require the development of solutions specific to each medium. This paper describes a development to the 3D printing methodology for clay, incorporating a closed-loop feedback system of material surveying and self-correction to recompute new depositions based on scanned local deviations from the digital model. This Responsive Spatial Print (RSP) method provides several improvements over the Spatial Print Trajectory (SPT) methodology for clay 3D printing of spatial lattices previously developed by the authors. This process compensates for the uncertain material behavior of clay due to its viscosity, malleability, and deflection through constant model recalibration, and it increases the predictability and the possible scale of spatial 3D prints through real-time material-informed toolpath generation. The RSP methodology and early successful results are presented along with new challenges to be addressed due to the increased scale of the possible outcomes.
keywords	work in progress, closed loop system, spatial clay printing, self-supporting lattice, in-situ printking, extrusion rate, material behavior
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	acadia18_302
id	acadia18_302
authors	Zivkovic, Sasa; Battaglia, Christopher
year	2018
title	Rough Pass Extrusion Tooling. CNC post-processing of 3D-printed sub-additive concrete lattice structures
doi	https://doi.org/10.52842/conf.acadia.2018.302
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 302-311
summary	Rough Pass Extrusion Tooling advances the manufacturing precision of full-scale Sub-Additive 3D printed concrete lattices in a three-step process that involves spatial 3D printing, high precision 3D scanning, and CNC post-processing. Utilizing robotics and computation, Sub-Additive Manufacturing (Battaglia et al. 2018) leverages digital workflows to produce structurally, materially, and spatially optimized lightweight concrete building components. Instead of further refining the 3D printing practice towards accuracy, and unlike other research projects that investigate 3D printing and subsequent post-processing, the method proposes to deliberately print a “rough pass”, accommodating any fabrication inaccuracy inevitably resulting from the concrete material and nozzle extrusion process. In a second step, supported by the advancement of 3D scanning, accuracy and geometric intricacy are achieved through locally post-processing components along edges, in pockets, on surfaces, and in areas of joinery. Rough Pass Extrusion Tooling enables the incorporation of higher fabrication tolerances as well as the integration of building systems, hardware, and complex connections. The method takes full advantage of the 3D printing process while introducing means to dramatically increase fabrication precision. Procedural infidelity – not aiming to solve accuracy through 3D printing alone – enables the development of a technically, methodologically, aesthetically, and performatively progressive multi-process fabrication method which opens a new realm for concrete printing accuracy. This paper closely examines CNC post-processing for Sub-Additive concrete print assemblies, addressing methodologies, opportunities, and shortcomings of such an approach.
keywords	full paper, fabrication & robotics, materials/adaptive systems, digital craft, fabrication tolerances
series	ACADIA
type	paper
email
last changed	2022/06/07 07:57

_id	acadia22pr_148
id	acadia22pr_148
authors	Jung,, Francisco; Al Othman, Sulaiman; Im, Hyeonji Claire; García del Castillo y López, Jose Luis; Bechthold, Martin
year	2022
title	Responsive Spatial Print Trajectory: 3D Printing of Clay Lattices with Self-Corrective Recalibration
source	ACADIA 2022: Hybrids and Haecceities [Projects Catalog of the 42nd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-7-4]. University of Pennsylvania Stuart Weitzman School of Design. 27-29 October 2022. edited by M. Akbarzadeh, D. Aviv, H. Jamelle, and R. Stuart-Smith. 148-153.
summary	This project presents a novel method of spatially printing clay lattices by controlling fabrication parameters such as the printing head speed and the material extrusion rate following a 3D-choreographed toolpath. Spatial printing refers to the unrestricted movement of the printer nozzle in three axes (x, y, z) when extruding material, as opposed to the conventional 2-axis layer-by-layer deposition that is very slow and results in increased operational costs. This method—enhanced with an integrated industrial laser displacement sensor to collect deflection data subsequently used to calibrate the next layer toolpath geometry in real- time—works optimally with carbon-fiber reinforcements for increased tensile performance.
series	ACADIA
type	project
email
last changed	2024/02/06 14:06

_id	acadia18_394
id	acadia18_394
authors	Adel, Arash; Thoma, Andreas; Helmreich, Matthias; Gramazio, Fabio; Kohler, Matthias
year	2018
title	Design of Robotically Fabricated Timber Frame Structures
doi	https://doi.org/10.52842/conf.acadia.2018.394
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 394-403
summary	This paper presents methods for designing nonstandard timber frame structures, which are enabled by cooperative multi-robotic fabrication at building-scale. In comparison to the current use of automated systems in the timber industry for the fabrication of plate-like timber frame components, this research relies on the ability of robotic arms to spatially assemble timber beams into bespoke timber frame modules. This paper investigates the following topics: 1) A suitable constructive system facilitating a just-in-time robotic fabrication process. 2) A set of assembly techniques enabling cooperative multi-robotic spatial assembly of bespoke timber frame modules, which rely on a man-machine collaborative scenario. 3) A computational design process, which integrates architectural requirements, fabrication constraints, and assembly logic. 4) Implementation of the research in the design and construction of a multi-story building, which validates the developed methods and highlights the architectural implications of this approach.
keywords	full paper, fabrication & robotics, generative design, computation, timber architecture
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	acadia18_216
id	acadia18_216
authors	Ahrens, Chandler; Chamberlain, Roger; Mitchell, Scott; Barnstorff, Adam
year	2018
title	Catoptric Surface
doi	https://doi.org/10.52842/conf.acadia.2018.216
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 216-225
summary	The Catoptric Surface research project explores methods of reflecting daylight through a building envelope to form an image-based pattern of light on the interior environment. This research investigates the generation of atmospheric effects from daylighting projected onto architectural surfaces within a built environment in an attempt to amplify or reduce spatial perception. The mapping of variable organizations of light onto existing or new surfaces creates a condition where the perception of space does not rely on form alone. This condition creates a visual effect of a formless atmosphere and affects the way people use the space. Often the desired quantity and quality of daylight varies due to factors such as physiological differences due to age or the types of tasks people perform (Lechner 2009). Yet the dominant mode of thought toward the use of daylighting tends to promote a homogeneous environment, in that the resulting lighting level is the same throughout a space. This research project questions the desire for uniform lighting levels in favor of variegated and heterogeneous conditions. The main objective of this research is the production of a unique facade system that is capable of dynamically redirecting daylight to key locations deep within a building. Mirrors in a vertical array are individually adjusted via stepper motors in order to reflect more or less intense daylight into the interior space according to sun position and an image-based map. The image-based approach provides a way to specifically target lighting conditions, atmospheric effects, and the perception of space.
keywords	full paper, non-production robotics, representation + perception, performance + simulation, building technologies
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	sigradi2018_1277
id	sigradi2018_1277
authors	Alani, Mostafa
year	2018
title	Heritage at Stake: Computational Design Processes for Rescuing Mosul’s Architectural Identity
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 165-169
summary	A generative algorithm for exploring the virtual design space of historic houses in the city of Mosul is presented. The method aims to progressively engage the spatial organization of traditional houses through investigating existing examples.
keywords	Traditional Mosul houses; Generative design; Shape grammar; Computation
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2018_1535
id	sigradi2018_1535
authors	Almeida, Caio; Brandão, Guilherme; Lima, Fernando; Borges, Marcos
year	2018
title	Spatial Proxemics: experiments and contributions of anthropological relationships in digital media
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1279-1284
summary	Proxemics was first defined by Edward. T. Hall as being the relations between non-verbal communications in a determined space. This paper aims to promote a theoretical interpolation between diverse study fields with new contemporary urbanism paradigms supported by technology and anthropological relations. In this optics, to provide a better understanding of possible characteristics within the proxemics theory can translate into a better spatial understanding and city improvement from an analysis methodology using digital tools.
keywords	Proxemics; Architecture; Urbanism; Phenomenology; Digital space
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2018_309
id	ecaade2018_309
authors	Aºut, Serdar, Eigenraam, Peter and Christidi, Nikoletta
year	2018
title	Re-flex: Responsive Flexible Mold for Computer Aided Intuitive Design and Materialization
doi	https://doi.org/10.52842/conf.ecaade.2018.1.717
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 717-726
summary	The paper presents an ongoing research about the design and a possible use of a responsive flexible mold. The mold is developed by integrating its precedents with automation and Human-Computer Interaction (HCI). The objective of the design is to provide an immersive design tool which has direct link to fabrication. It allows intuitive interaction to its user in order to help with the design and production of complex forms by supporting the designer's implicit skills with computer. The paper presents the design by illustrating the use of the hardware such as the actuators, the sensor and the projector; and by defining the workflow within the software. The paper concludes with the description of a possible use case in which the system is used to design and materialize an object in different scales.
keywords	Design tools development; Digital fabrication and robotics; Human-computer interaction in design; Shape, form and geometry; Inventive Making
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_w08
id	ecaade2018_w08
authors	Aºut, Serdar, Gouwetor, Friso and Latka, Jerzy
year	2018
title	Form-Adapt - Using Adaptable Form-work for Fabricating Double-Curved Surfaces
doi	https://doi.org/10.52842/conf.ecaade.2018.1.047
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 47-48
summary	This workshop will introduce the use of FlexiMold, an adaptable form-work device for fabricating double-curved surfaces; and Marionette, the parametric design tool of Vectorworks. The participants will have the opportunity to experience the entire workflow from the design to the production of a spatial object which has a complex form. The object will be composed of separate panels each of which will be designed by a participant and will be fabricated by team work.
keywords	Computational Design; Computer Aided Manufacturing; Double-Curved Surfaces
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2018_1565
id	sigradi2018_1565
authors	Ba??k, Altan; Alaçam, Sema
year	2018
title	Sharing Background Noise: Enactive Approach in Reading Auditory Space
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 100-108
summary	This paper conceptualizes the Auditory space in terms of hearing process by employing the Enactive Approach. In this context, this study aims investigate the spatial awareness and proposes a research methodology to achieve access to the auditory space where places share similar background noise. This methodology consists of two phases: field recording of the pre-determined route first explored by the Spectrogram Sound Analysis (SSA) technique, secondly with the participation of 8 subjects, a survey analysis based on listening to records captured from the predefined route. This research aims to reveal potential use of SSA by relating to survey examination as a new way of reading space.
keywords	Background Noise, Auditory Space, Enactive Approach, Spectrogram, Survey Examination
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2018_1359
id	sigradi2018_1359
authors	Bertola Duarte, Rovenir; Ziger Dalgallo, Ayla; Consalter Diniz, Maria Luisa; Romão Magoga, Thais
year	2018
title	A window to the autism: the political role of the difference of an objectile in the homogeneous school
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 848-853
summary	This paper approaches the insertion of an objectile in the homogeneous space of a school, looking to bring flexibility and responsiveness to assist a user with Autism Spectrum Disorder (ASD). The research concerns with photosensitivity, a problem faced by almost 25% of the children with autism (Miller-Horn; Spence; Takeoka, 2011). The study is based on the theories for ASD environments that speak of ‘sensorial perception’ and ‘thinking with imagery’ (Mostafa, 2008), and the coexistence of Sensory Design Theory and Neuro-Typical Method (Pomana, 2015). The result consists of a gadget developed in MIT App Inventor tool and a curtain that interact responsively through an Arduino code, for a new connection between the user and his surroundings.
keywords	Objectile; Responsive Architecture; Architecture and autism; ASD; Inclusive school
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia18_276
id	acadia18_276
authors	Bilotti, Jeremy; Norman, Bennett; Rosenwasser, David; Leo Liu, Jingyang; Sabin, Jenny
year	2018
title	Robosense 2.0. Robotic sensing and architectural ceramic fabrication
doi	https://doi.org/10.52842/conf.acadia.2018.276
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 276-285
summary	Robosense 2.0: Robotic Sensing and Architectural Ceramic Fabrication demonstrates a generative design process based on collaboration between designers, robotic tools, advanced software, and nuanced material behavior. The project employs fabrication tools which are typically used in highly precise and predetermined applications, but uniquely thematizes the unpredictable aspects of these processes as applied to architectural component design. By integrating responsive sensing systems, this paper demonstrates real-time feedback loops which consider the spontaneous agency and intuition of the architect (or craftsperson) rather than the execution of static or predetermined designs. This paper includes new developments in robotics software for architectural design applications, ceramic-deposition 3D printing, sensing systems, materially-driven pattern design, and techniques with roots in the arts and crafts. Considering the increasing accessibility and advancement of 3D printing and robotic technologies, this project seeks to challenge the erasure of materiality: when mistakes or accidents caused by inconsistencies in natural material are avoided or intentionally hidden. Instead, the incorporation of material and user-input data yields designs which are imbued with more nuanced traces of making. This paper suggests the potential for architects and craftspeople to maintain a more direct and active relationship with the production of their designs.
keywords	full paper, fabrication & robotics, robotic production, digital fabrication, digital craft
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_459
id	ecaadesigradi2019_459
authors	Bourdakis, Vassilis and Tsangrassoulis, Aris
year	2019
title	Dynamic Façade Design Studio - From sketches to microcontrollers
doi	https://doi.org/10.52842/conf.ecaade.2019.2.725
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 725-730
summary	The paper presents the outcome of two semesters running a dynamic façade design studio (2014 and 2018) to 3rd and 4th year undergraduates, using computational design, simulation and visualization tools in designing environmentally activated building envelopes. The paper discusses the problems faced by the students and the teaching team throughout the design process and finally suggests ways of integrating microcontrollers as a teaching tool enabling students to comprehend the logic, complexities and overall mechanics of responsive environmental design.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	sigradi2018_1671
id	sigradi2018_1671
authors	Brito, Michele; de Sá, Ana Isabel; Borges, Jéssica; Rena, Natacha
year	2018
title	IndAtlas - Technopolitic platform for urban investigation
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1305-1312
summary	This article presents the project of the urban research platform IndAtlas, currently in early development stage by UFMG’s Research Group Indisciplinar. Through the association of crowdsourcing tools, a spatial database and the production of visualizations of different types, it is intended to create a Web platform for collecting, analyzing and depicting information about processes of production and transformation of urban space. It is proposed that the phenomena (themes) investigated in the platform are approached mainly from four axes: 1) spatial / territorial; 2) temporal; 3) social; 4) communicational. To do this, we try to combine online collaborative maps with the production of dynamic timelines and visualizations of networks of social actors (graphs), connected with social networks and Wiki pages. The article will address the development of Indisciplinar’s working method, which guided the proposal of the platform, as well as the functional and technical aspects to be observed for its implementation, the proposed architecture and the importance of interoperability for the project. Finally, the inquiries derived from the first test experiment of an IndAtlas test prototype will be presented. The experiment took place in a workshop belonging to the Cidade Eletrônika 2018 Festival – an arts and technology event. The workshop was offered in January of the same year, and it proposed a collaborative cartography of the Santa Tereza neighborhood, in Belo Horizonte / MG – a traditional neighborhood of great importance for historical heritage, currently subject to great real estate pressure and the focus of a series of territorial disputes.
keywords	IndAtlas, Crowdsourcing, Urban Technopolitics,, Digital Cartographies,, Spatial Data.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia23_v1_166
id	acadia23_v1_166
authors	Chamorro Martin, Eduardo; Burry, Mark; Marengo, Mathilde
year	2023
title	High-performance Spatial Composite 3D Printing
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 166-171.
summary	This project explores the advantages of employing continuum material topology optimization in a 3D non-standard lattice structure through fiber additive manufacturing processes (Figure 1). Additive manufacturing (AM) has gained rapid adoption in architecture, engineering, and construction (AEC). However, existing optimization techniques often overlook the mechanical anisotropy of AM processes, resulting in suboptimal structural properties, with a focus on layer-by-layer or planar processes. Materials, processes, and techniques considering anisotropy behavior (Kwon et al. 2018) could enhance structural performance (Xie 2022). Research on 3D printing materials with high anisotropy is limited (Eichenhofer et al. 2017), but it holds potential benefits (Liu et al. 2018). Spatial lattices, such as space frames, maximize structural efficiency by enhancing flexural rigidity and load-bearing capacity using minimal material (Woods et al. 2016). From a structural design perspective, specific non-standard lattice geometries offer great potential for reducing material usage, leading to lightweight load-bearing structures (Shelton 2017). The flexibility and freedom of shape inherent to AM offers the possibility to create aggregated continuous truss-like elements with custom topologies.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	ecaade2018_164
id	ecaade2018_164
authors	Chang, Mei-Chih, Buš, Peter, Tartar, Ayça, Chirkin, Artem and Schmitt, Gerhard
year	2018
title	Big-Data Informed Citizen Participatory Urban Identity Design
doi	https://doi.org/10.52842/conf.ecaade.2018.2.669
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 669-678
summary	The identity of an urban environment is important because it contributes to self-identity, a sense of community, and a sense of place. However, under present-day conditions, the identities of expanding cities are rapidly deteriorating and vanishing, especially in the case of Asian cities. Therefore, cities need to build their urban identity, which includes the past and points to the future. At the same time, cities need to add new features to improve their livability, sustainability, and resilience. In this paper, using data mining technologies for various types of geo-referenced big data and combine them with the space syntax analysis for observing and learning about the socioeconomic behavior and the quality of space. The observed and learned features are identified as the urban identity. The numeric features obtained from data mining are transformed into catalogued levels for designers to understand, which will allow them to propose proper designs that will complement or improve the local traditional features. A workshop in Taiwan, which focuses on a traditional area, demonstrates the result of the proposed methodology and how to transform a traditional area into a livable area. At the same time, we introduce a website platform, Quick Urban Analysis Kit (qua-kit), as a tool for citizens to participate in designs. After the workshop, citizens can view, comment, and vote on different design proposals to provide city authorities and stakeholders with their ideas in a more convenient and responsive way. Therefore, the citizens may deliver their opinions, knowledge, and suggestions for improvements to the investigated neighborhood from their own design perspective.
keywords	Urban identity; unsupervised machine learning; Principal Component Analysis (PCA); citizen participated design; space syntax
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2018_227
id	ecaade2018_227
authors	Chatzitsakyris, Panagiotis
year	2018
title	EventMode - A new computational design tool for integrating human activity data within the architectural design workflow
doi	https://doi.org/10.52842/conf.ecaade.2018.1.649
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 649-656
summary	Architectural designers are currently depending on a multitude of elaborate computational tools in order to explore, manipulate and visualize the geometric form of their building projects. However, if architecture can be perceived as the manipulation of geometric form in direct relation to human activities and events that take place inside it, then it is evident that such design parameters are not sufficiently represented in the currently available modeling software. Would it be possible to introduce the human activity element in the aforementioned computational tools in a way that informs the design process and improves the final building product? This paper attempts to answer this question by introducing a new experimental design tool that enables the creation of parametric human activity envelopes within three-dimensional digital models. The novel approach is that this tool enables the parametric interaction of these components with the actual building geometry and generates novel visual and data representations of the 3D model. The goal is to improve the decision-making process of architects as well as their clients by enabling them to evaluate and iterate their designs based not only on the building's form but also on the human spatial events that take place inside it. A prototype implementation demonstrates the tool's practical application through three design examples.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia18_386
id	acadia18_386
authors	Chen, Canhui; Burry, Jane
year	2018
title	(Re)calibrating Construction Simplicity and Design Complexity
doi	https://doi.org/10.52842/conf.acadia.2018.386
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 386-393
summary	Construction simplicity is crucial to cost control, however design complexity is often necessary in order to meet particular spatial performance criteria. This paper presents a case study of a semi-enclosed meeting pod that has a brief that must contend with the seemingly contradictory conditions of the necessary geometric complexities imperative to improved acoustic performance and cost control in construction. A series of deep oculi are introduced as architectural elements to link the pod interior to the outside environment. Their reveals also introduce sound reflection and scattering, which contribute to the main acoustic goal of improved speech privacy. Represented as a three-dimensional funnel like shape, the reveal to each opening is unique in size, depth and angle. Traditionally, the manufacturing of such bespoke architectural elements in many cases resulted in lengthy and costly manufacturing processes. This paper investigates how the complex oculi shape variations can be manufactured using one universal mold. A workflow using mathematical and computational operations, a standardized fabrication approach and customization through tooling results in a high precision digital process to create particular calculated geometries, recalibrated at each stage to account for the paradoxical inexactitudes and inevitable tolerances.
keywords	work in progress,tolerance, developable surface, form finding, construction simplicity, material behavior
series	ACADIA
type	paper
email
last changed	2022/06/07 07:55

_id	sigradi2018_1609
id	sigradi2018_1609
authors	Chia, Hsu Yi; Hsien, Hsu Pei
year	2018
title	The fabrication and application of parametric inflatable structure
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 684-689
summary	This study uses parametric design to optimize the process and application of the inflatable method. Inflatable design has advantages of light weight, integral forming, volume change, etc., but the manufacturing process often requires the development of molds, a large number of manual heat seals, etc. Inspired by the structure principle of amputated wing tube structure, coupled with the advantages of parameterization and digital tool heat sealing, The same material can be made at different tightness, because the tight design with different angles has more structural characteristics and bending properties, thereby generating more complex spatial structures. Different materials also have corresponding manufacturing methods, which also increase the opportunities for application in architectural design.
keywords	Robotic arms fabrication; Inflatable Shape-change; pneumatic; bending mechanism; pavilion design;
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaadesigradi2019_249
id	ecaadesigradi2019_249
authors	Chiarella, Mauro, Gronda, Luciana and Veizaga, Martín
year	2019
title	RILAB - architectural envelopes - From spatial representation (generative algorithm) to geometric physical optimization (scientific modeling)
doi	https://doi.org/10.52842/conf.ecaade.2019.3.017
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 17-24
summary	Augmented graphical thinking operates by integrating algorithmic, heuristic, and manufacturing processes. The Representation and Ideation Laboratory (RILAB-2018) exercise begins with the application of a parametric definition developed by the team of teachers, allowing for the construction of structural systems by the means of the combination of segmental shells and bending-active. The main objetive is the construction of a scientific model of simulation for bending-active laminar structures has brought into reality trustworthy previews for architectural envelopes through the interaction of parametrized relational variables. This way we put designers in a strategic role for the building of the pre-analysis models, allowing more preciseness at the time of picking and defining materials, shapes, spaces and technologies and thus minimizing the decisions based solely in the definition of structural typological categories, local tradition or direct experience. The results verify that the strategic integration of models of geometric physical optimization and spatial representation greatly expand the capabilities in the construction of the complex system that operates in the act of projecting architecture.
keywords	architectural envelopes; augmented graphic thinking; geometric optimization; bending-active
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

For more results click below: