Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2445

Reformat results as: short short into frame detailed detailed into frame

_id	ecaadesigradi2019_068
id	ecaadesigradi2019_068
authors	Agirbas, Asli
year	2019
title	The Effect of Complex Wall Forms on the Room Acoustics - An experimental case study
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 97-102
doi	https://doi.org/10.52842/conf.ecaade.2019.2.097
summary	The complexity of the wall form affects the acoustics of the space. In this study, the effect of the complex form walls produced by nCloth dynamic simulation on the acoustics of an office space was investigated. In this research, reverberation time and Speech Transmission Index (STI) values of the pilot office space with one wall having complex form and the office space with all of the walls as flat were measured by acoustic simulation. As a result of the comparison, it has been found that, within speech intelligibility and reverberation time, the acoustics of the space with one wall having complex form is better than the acoustics of the space with all the walls as flat.
keywords	nCloth; Acoustics; Complex forms; Modeling & simulation
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_318
id	ecaadesigradi2019_318
authors	Al Bondakji, Louna, Lammich, Anne-Liese and Werner, Liss C.
year	2019
title	ViBe (Virtual Berlin) - Immersive Interactive 3D Urban Data Visualization - Immersive interactive 3D urban data visualization
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 83-90
doi	https://doi.org/10.52842/conf.ecaade.2019.3.083
summary	The project investigates the possibility of visualizing open source data in a 3D interactive virtual environment. We propose a new tool, 'ViBe'. We programmed 'ViBe' using Unity for its compatibility with HTC VIVE glasses for virtual reality (VR). ViBe offers an abstract visualization of open source data in a 3D interactive environment. The ViBe environment entails three main topics a) inhabitants, b) environmental factors, and c) land-use; acting as representatives of parameters for cities and urban design. Berlin serves as a case study. The data sets used are divided according to Berlin's twelve administrative districts. The user immerses into the virtual environment where they can choose, using the HTC Vive controllers, which district (or Berlin as a whole) they want information for and which topics they want to be visualized, and they can also teleport back and forth between the different districts. The goal of this project is to represent different urban parameters an abstract simulation where we correlate the corresponding data sets. By experiencing the city through visualized data, ViBe aims to provide the user with a clearer perspective onto the city and the relationship between its urban parameters. ViBe is designed for adults and kids, urban planners, politicians and real estate developers alike.
keywords	3D-Visualization; open source data; immersive virtual reality; interactive ; Unity
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_061
id	ecaadesigradi2019_061
authors	Alkadri, Miktha Farid, De Luca, Francesco, Turrin, Michela and Sariyildiz, Sevil
year	2019
title	Making use of Point Cloud for Generating Subtractive Solar Envelopes
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 633-640
doi	https://doi.org/10.52842/conf.ecaade.2019.1.633
summary	As a contextual and passive design strategy, solar envelopes play a great role in determining building mass based on desirable sun access during the predefined period. With the rapid evolution of digital tools, the design method of solar envelopes varies in different computational platforms. However, current approaches still lack in covering the detailed complex geometry and relevant information of the surrounding context. This, consequently, affects missing information during contextual analysis and simulation of solar envelopes. This study proposes a subtractive method of solar envelopes by considering the geometrical attribute contained in the point cloud of TLS (terrestrial laser scanner) dataset. Integration of point cloud into the workflow of solar envelopes not only increases the robustness of final geometry of existing solar envelopes but also enhances awareness of architects during contextual analysis due to consideration of surface properties of the existing environment.
keywords	point cloud data; solar envelopes; subtractive method; solar access
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_335
id	ecaadesigradi2019_335
authors	Amorim, Luiz and Griz, Cristiana
year	2019
title	Amorim's Law - A modern grammar
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 393-402
doi	https://doi.org/10.52842/conf.ecaade.2019.2.393
summary	In normative or prescriptive theories, architectural requirements are set as parameters to support design decisions. A set of formal parameters is suffice to generate a wide variety of compositions, but associated to the same formal language. This paper looks at the work of the Portuguese-Brazilian architect, Delfim Fernandes Amorim, whose contributions to the dissemination of modern ideas and the development of a particular architectural lexicon is quite relevant, particularly his addendum to the municipal land use and occupation act, which became generally known as the Amorim's Law. It consists basically in allowing spaces of transitory occupation and specific architectural elements to be built beyond the mandatory setback limits. This paper presents the development of a grammar that shows how some of the parameters described in Amorim's law are able to create a strong formal language and influence the building's architectural composition. The grammar was developed in two successive stages: the first allows the generation of the pattern of adjacency of the apartment's rooms; the second, guide the insertion of the openings and architectural elements as defined by the Amorim's Law.
keywords	Shape grammar; Parametric design; Design building; Modern architecture
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_605
id	ecaadesigradi2019_605
authors	Andrade Zandavali, Bárbara and Jiménez García, Manuel
year	2019
title	Automated Brick Pattern Generator for Robotic Assembly using Machine Learning and Images
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 217-226
doi	https://doi.org/10.52842/conf.ecaade.2019.3.217
summary	Brickwork is the oldest construction method still in use. Digital technologies, in turn, enabled new methods of representation and automation for bricklaying. While automation explored different approaches, representation was limited to declarative methods, as parametric filling algorithms. Alternatively, this work proposes a framework for automated brickwork using a machine learning model based on image-to-image translation (Conditional Generative Adversarial Networks). The framework consists of creating a dataset, training a model for each bond, and converting the output images into vectorial data for robotic assembly. Criteria such as: reaching wall boundary accuracy, avoidance of unsupported bricks, and brick's position accuracy were individually evaluated for each bond. The results demonstrate that the proposed framework fulfils boundary filling and respects overall bonding structural rules. Size accuracy demonstrated inferior performance for the scale tested. The association of this method with 'self-calibrating' robots could overcome this problem and be easily implemented for on-site.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_182
id	ecaadesigradi2019_182
authors	Argin, Gorsev, Pak, Burak and Turkoglu, Handan
year	2019
title	Post-flâneur in Public Space - Altering walking behaviour in the era of smartphones
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 649-658
doi	https://doi.org/10.52842/conf.ecaade.2019.1.649
summary	Smartphones have become an ordinary accompanier of our walks and created new modes of appropriation of public space. This study aims to research these modes by observing the altering visual attention and walking behavior of people using smartphones in public space, and in this way, to reveal the emergence of different types of post-flâneurs. In order to address these aims, 346 (195 females, 151 males) smartphone users were observed in a central public square in Ghent, Belgium for seven days in 10-minute time intervals. Each person's gender, age, number of accompanies and their dominant mode of smartphone usage(s) were identified. Afterward, each person's walking timeline was organized into seconds and coded according to their focus of visual attention in 24 different modes which grouped under the three gaze types; visual attention on the environment, on the environment through the smartphone screen, and on the smartphone screen. Results of the descriptive statistics, multivariate graph, and rhythm-based in-depth analysis show that different types of smartphone activities affect visual attention and speed differently. Different types of post-flâneurs such as navigators and photo takers were identified based upon their high percentage of visual attention on the environment and slower walking speed. The study also revealed the frequent presence of phone-walkers (who walk while only holding the smartphone) and smartphone zombies (who walk slowly and without attention to their surrounding) in public space. In addition to these, our research revealed rapid smartphone zombies who walk faster than the average walking speed, a finding contrary to the former studies reviewed.
keywords	visual attention; public space; smartphone; walking behaviour; post-flâneur
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_290
id	ecaadesigradi2019_290
authors	Assem, Ayman, Abdelmohsen, Sherif and Ezzeldin, Mohamed
year	2019
title	A Fuzzy-Based Approach for Evaluating Existing Spatial Layout Configurations
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 35-44
doi	https://doi.org/10.52842/conf.ecaade.2019.2.035
summary	This paper proposes a fuzzy-based approach for the automated evaluation of spatial layout configurations. Our objective is to evaluate soft and interdependent design qualities (such as connectedness, enclosure, spaciousness, continuity, adjacency, etc.), to satisfy multiple and mutually inclusive criteria, and to account for all potential and logical solutions without discarding preferable, likely or even less likely possible solutions. Using fuzzyTECH, a fuzzy logic software development tool, we devise all possible spatial relation inputs affecting physical and non-physical outputs for a given space using descriptive rule blocks. We implement this fuzzy logic system on an existing residential space to evaluate different layout alternatives. We define all linguistic input variables, output variables, and fuzzy sets, and present space-space relations using membership functions. We use the resulting database of fuzzy agents to evaluate the design of the existing residential spaces.
keywords	Fuzzy logic; Space layout planning; Heuristic methods
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_340
id	ecaadesigradi2019_340
authors	Azambuja Varela, Pedro and Sousa, José Pedro
year	2019
title	Digital Expansion of Stereotomy - A semantic classification
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 387-396
doi	https://doi.org/10.52842/conf.ecaade.2019.1.387
summary	This paper presents a critical analysis and reflection on stereotomy with the purpose of updating its theoretical discourse. Having risen to the apex of architecture technological possibilities in the 17th century, stereotomic construction lost its importance in favour of iron, steel and other materials and construction techniques brought by the Industrial Revolution. More recently, much owing to the possibilities offered by digital technologies, a resurgence of interest in the subject has spawned various researches which bring stereotomy back to the architectural discourse. Although technological applications and design innovations in service of stereotomy have developed in multiple interesting paths, there is a lack of a common theory on the subject which is capable of relating these multiple apparently diverging stereotomic approaches between each other and, maybe even more importantly, to the classical practice which sparked the development this discipline. The research presented in this paper shows how the digital tools were instrumental in bringing this tradition to architecture contemporaneity and how a current stereotomy is largely supported by these technologies, while keeping strong relations to its classic origin.
keywords	stereotomy; classification; history; digital
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_449
id	ecaadesigradi2019_449
authors	Becerra Santacruz, Axel
year	2019
title	The Architecture of ScarCity Game - The craft and the digital as an alternative design process
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-52
doi	https://doi.org/10.52842/conf.ecaade.2019.3.045
summary	The Architecture of ScarCity Game is a board game used as a pedagogical tool that challenges architecture students by involving them in a series of experimental design sessions to understand the design process of scarcity and the actual relation between the craft and the digital. This means "pragmatic delivery processes and material constraints, where the exchange between the artisan of handmade, representing local skills and technology of the digitally conceived is explored" (Huang 2013). The game focuses on understanding the different variables of the crafted design process of traditional communities under conditions of scarcity (Michel and Bevan 1992). This requires first analyzing the spatial environmental model of interaction, available human and natural resources, and the dynamic relationship of these variables in a digital era. In the first stage (Pre-Agency), the game set the concept of the craft by limiting students design exploration from a minimum possible perspective developing locally available resources and techniques. The key elements of the design process of traditional knowledge communities have to be identified (Preez 1984). In other words, this stage is driven by limited resources + chance + contingency. In the second stage (Post-Agency) students taking the architects´ role within this communities, have to speculate and explore the interface between the craft (local knowledge and low technological tools), and the digital represented by computation data, new technologies available and construction. This means the introduction of strategy + opportunity + chance as part of the design process. In this sense, the game has a life beyond its mechanics. This other life challenges the participants to exploit the possibilities of breaking the actual boundaries of design. The result is a tool to challenge conventional methods of teaching and leaning controlling a prescribed design process. It confronts the rules that professionals in this field take for granted. The game simulates a 'fake' reality by exploring in different ways with surveyed information. As a result, participants do not have anything 'real' to lose. Instead, they have all the freedom to innovate and be creative.
keywords	Global south, scarcity, low tech, digital-craft, design process and innovation by challenge.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	caadria2019_459
id	caadria2019_459
authors	Behmanesh, Hossein and Brown, AndrÃ© G.P.
year	2019
title	Classification and Review of Software Applications in the Context of Urban Design Processes
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 211-220
doi	https://doi.org/10.52842/conf.caadria.2019.2.211
summary	We have seen increasing expectations from our cities: as we aim to enable them to become smarter, more efficient and more sustainable. Having these goals makes the urban designing process increasingly complex. Undertaking contemporary urban design and analysis requires a rounded and inclusive approach. In the discussion relating to the smart city there has been attention to infrastructure technology solutions. But ways of estimating the success of more comprehensive urban design interventions is also extremely important. In response to these needs, digital urban design simulation and analysis software packages have been developed to help urban designers model and evaluate their designs before they take shape in the real world. We analyse, and reflect on the current aids available, classifying the urban design software packages which were used in the body of knowledge. In addition, more influential urban design software packages have been reviewed to figure out in which stages of the urban design process, they have applied. This review also helpful for software developer to understand which software packages more useful and which ones need to be developed in future.
keywords	Smart city; Urban Design Process; software application; classification
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ijac201917103
id	ijac201917103
authors	Bejarano, Andres; and Christoph Hoffmann
year	2019
title	A generalized framework for designing topological interlocking configurations
source	International Journal of Architectural Computing vol. 17 - no. 1, 53-73
summary	A topological interlocking configuration is an arrangement of pieces shaped in such a way that the motion of any piece is blocked by its neighbors. A variety of interlocking configurations have been proposed for convex pieces that are arranged in a planar space. Published algorithms for creating a topological interlocking configuration start from a tessellation of the plane (e.g. squares colored as a checkerboard). For each square S of one color, a plane P through each edge E is considered, tilted by a given angle ? against the tessellated plane. This induces a face F supported by P and limited by other such planes nearby. Note that E is interior to the face. By adjacency, the squares of the other color have similarly delimiting faces. This algorithm generates a topological interlocking configuration of tetrahedra or antiprisms. When checked for correctness (i.e. for no overlap), it rests on the tessellation to be of squares. If the tessellation consists of rectangles, then the algorithm fails. If the tessellation is irregular, then the tilting angle is not uniform for each edge and must be determined, in the worst case, by trial and error. In this article, we propose a method for generating topological interlocking configurations in one single iteration over the tessellation or mesh using a height value and a center point type for each tile as parameters. The required angles are a function of the given height and selected center; therefore, angle choices are not required as an initial input. The configurations generated using our method are compared against the configurations generated using the angle-choice approach. The results show that the proposed method maintains the alignment of the pieces and preserves the co-planarity of the equatorial sections of the pieces. Furthermore, the proposed method opens a path of geometric analysis for topological interlocking configurations based on non-planar tessellations.
keywords	Topological interlocking, surface tessellation, irregular geometry, parametric design, convex assembly
series	journal
email
last changed	2019/08/07 14:04

_id	ecaadesigradi2019_498
id	ecaadesigradi2019_498
authors	Bermek, Mehmet Sinan, Shelden, Dennis and Gentry, T. Russel
year	2019
title	A Holistic Approach to Feature-based Structural Mapping in Cross Laminated Timber Buildings
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 789-796
doi	https://doi.org/10.52842/conf.ecaade.2019.2.789
summary	Mass Engineered Timber products provide a unique opportunity in configuring panelized building systems that are suitable for both prefabrication and onsite customization. The structural nature of these large section elements also brings about the need for a coordinated design-fabrication-assembly workflow. These products can assume different geometric configurations and their behaviour can be approximated globally by simplifying framing schemas. Current BIM Interoperability standards such as STEP or IFC already acknowledge and support the interconnected nature of component properties, yet these Data Models are component focused. Expanding on the relationships between components and using sets to define part to whole, or exteriority relationships could yield a more flexible and agile querying of building information.This would be a framework fit for automated feature derivation and rule based design applications. To this end Graph structures and Graph Databases, alongside existing ontology authoring tools are studied to probe new cognitive possibilities in collaborative AEC workflows
keywords	Graph theory; BIM; CLT; IFC
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:52

_id	ecaadesigradi2019_110
id	ecaadesigradi2019_110
authors	Bernal, Marcelo, Marshall, Tyrone, Okhoya, Victor, Chen, Cheney and Haymaker, John
year	2019
title	Parametric Analysis versus Intuition - Assessment of the effectiveness of design expertise
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 103-110
doi	https://doi.org/10.52842/conf.ecaade.2019.2.103
summary	This paper explores through professional case studies how design solutions produced by expert teams compares to those developed through systematic parametric analysis. While the expert intuition of either single designer or teams helps to rapidly identify relevant aspects of the design problem and produce viable solutions, it has limitation to address multi-criteria design problems with conflicting objectives and searching for design alternatives. On the other hand, parametric analysis techniques in combination with data analysis methods helps to construct and analyze large design spaces of potential design solutions. For the purpose of this study, the specifications of geometric features and material properties of the building envelopes proposed by the expert design teams define the base line to measure the extent of the performance improvements of two typically conflicting objectives: Daylight quality and energy consumption. The results show consistently significant performance improvement after systematic optimization.
keywords	Performance Analysis; Parametric Analysis; Design Space; Design Expertise; Optimization
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:52

_id	ecaadesigradi2019_425
id	ecaadesigradi2019_425
authors	Betti, Giovanni, Aziz, Saqib and Ron, Gili
year	2019
title	Pop Up Factory : Collaborative Design in Mixed Rality - Interactive live installation for the makeCity festival, 2018 Berlin
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 115-124
doi	https://doi.org/10.52842/conf.ecaade.2019.3.115
summary	This paper examines a novel, integrated and collaborative approach to design and fabrication, enabled through Mixed Reality. In a bespoke fabrication process, the design is controlled and altered by users in holographic space, through a custom, multi-modal interface. Users input is live-streamed and channeled to 3D modelling environment,on-demand robotic fabrication and AR-guided assembly. The Holographic Interface is aimed at promoting man-machine collaboration. A bespoke pipeline translates hand gestures and audio into CAD and numeric fabrication. This enables non-professional participants engage with a plethora of novel technology. The feasibility of Mixed Reality for architectural workflow was tested through an interactive installation for the makeCity Berlin 2018 festival. Participants experienced with on-demand design, fabrication an AR-guided assembly. This article will discuss the technical measures taken as well as the potential in using Holographic Interfaces for collaborative design and on-site fabrication.Please write your abstract here by clicking this paragraph.
keywords	Holographic Interface; Augmented Reality; Multimodal Interface; Collaborative Design; Robotic Fabrication; On-Site Fabrication
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:52

_id	ecaadesigradi2019_619
id	ecaadesigradi2019_619
authors	Beyer, Bastian, Suárez, Daniel and Palz, Norbert
year	2019
title	Microbiologically Activated Knitted Composites - Reimagining a column for the 21st century
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 541-552
doi	https://doi.org/10.52842/conf.ecaade.2019.2.541
summary	A column is an archetypal constituent of architecture which historically underwent constant reiteration in accordance with the prevalent architectural style, material culture or technical and structural possibilities. The project reimagined this architectural element through harnessing the synergies of digital design, textile logic, and contemporary biotechnology. Textile materiality and aesthetic are deeply rooted in architectural history as a soft and ephemeral antipode to rigid building materials. An investigation in historic mechanical hand-knitting techniques allowed to extract their underlying structural and geometric logic to develop a structural optimisation pipeline with a graded yarn as a base material and a geometric optimization based on local distribution of knitting patterns. Bacterially driven biocalcification was applied to transform the soft textile structure into a rigid material. Hereby an active textile microbiome was established through colonizing of the yarn with the bacterium S. pasteurii which successively precipitated calcite on microscale within the textile substrate hence ultimately influencing the global structural behaviour of the column.
keywords	textile microbiome; material customization; knitting; yarn augmentation
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:52

_id	ecaade2024_222
id	ecaade2024_222
authors	Bindreiter, Stefan; Sisman, Yosun; Forster, Julia
year	2024
title	Visualise Energy Saving Potentials in Settlement Development: By linking transport and energy simulation models for municipal planning
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 2, pp. 79–88
doi	https://doi.org/10.52842/conf.ecaade.2024.2.079
summary	To achieve Sustainable Development Goals, in addition to the switch to sustainable energy sources and energy-efficient buildings, transport offers a major lever for reducing energy consumption and greenhouse gases. The increasing demand for emission-free mobility (e.g. through electromobility) but also heat pumps has a direct impact on the electricity consumption of buildings and settlements. It is still difficult to simulate the effects and interactions of different measures as sector coupling concepts require comprehensible tools for ex ante evaluation of planning measures at the community level and the linking of domain-specific models (energy, transport). Using the municipality of Bruck an der Leitha (Austria) as an example, a digital twin based on an open data model (Bednar et al., 2020) is created for the development of methods, which can be used to simulate measures to improve the settlement structure within the municipality. Forecast models for mobility (Schmaus, 2019; Ritz, 2019) and the building stock are developed or applied and linked via the open data model to be able to run through development scenarios and variants. The forecasting and visualisation options created in the project form the basis for the ex-ante evaluation of measures and policies on the way to a Positive-Energy-District. By identifying and collecting missing data, data gaps are filled for the simulation of precise models in the specific study area. A digital, interactive 3D model is created to examine the forecast results and the different scenarios.
keywords	visualisation, decision support, sector coupling, holistic spatial energy models for municipal planning, (energy) saving potentials in settlement development
series	eCAADe
email
last changed	2024/11/17 22:05

_id	ecaadesigradi2019_555
id	ecaadesigradi2019_555
authors	Bomfim, Kyane and Tavares, Felipe
year	2019
title	Building facade optimization for maximizing the incident solar radiation
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 171-180
doi	https://doi.org/10.52842/conf.ecaade.2019.2.171
summary	The technological breakthrough on photovoltaic facades and the high potential for installing photovoltaic (PV) systems in the city of Salvador are the motivation for this article. This case study explores the feasibility of implementing solar energy technology on a building facade, proposing a design method for optimizing insolation performance by the form-finding process in a parameterized shape. The goal was to generate a parametric design workflow, in which it could be found some facade shapes, generating triangle and quadrilateral supporting grids, leading to better results in the total amount of radiation in comparison to the basic flat facade. In these supporting grids were evaluated also the fitting in the distribution of quadrilateral commercial PV cells, measuring its geometric compatibility. By the results, it could be verified the gains and losses in PV potential in several instances obtained by the form-finding process, as the potentials to consider this in the design of every building.
keywords	Radiation skydome; Shape parameterization; Form-finding; Genetic Algorithm; PV facade
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_628
id	ecaadesigradi2019_628
authors	Borunda, Luis, Ladron de Guevara, Manuel and Anaya, Jesus
year	2019
title	Design Method for Optimized Infills in Additive Manufacturing Thermoplastic Components
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 493-502
doi	https://doi.org/10.52842/conf.ecaade.2019.1.493
summary	The following article extends and tests computational methodologies of design to consider Finite Element Analysis in the creation of optimized infill structures based on regular and semi-regular patterns that comply with the geometrical constraints of deposition. The Stress-Deformation relationship manifested in Finite Element Analysis is structured in order to influence the geometrical arrangement of the complex spatial infill. The research presents and discusses a program of performance informed infill design, and validates the generalizability of a method of internalizing and automating Finite Element Method (FEM) processing in Fused Deposition Modeling (FDM) workflows, and tests manufacturability of the methods through its ability to handle the FDM process constraints of FEM influenced intricate geometries.
keywords	Additive Manufacturing; Finite Element Analysis; Fused Deposition Modeling; 3D infill
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_459
id	ecaadesigradi2019_459
authors	Bourdakis, Vassilis and Tsangrassoulis, Aris
year	2019
title	Dynamic Façade Design Studio - From sketches to microcontrollers
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 725-730
doi	https://doi.org/10.52842/conf.ecaade.2019.2.725
summary	The paper presents the outcome of two semesters running a dynamic façade design studio (2014 and 2018) to 3rd and 4th year undergraduates, using computational design, simulation and visualization tools in designing environmentally activated building envelopes. The paper discusses the problems faced by the students and the teaching team throughout the design process and finally suggests ways of integrating microcontrollers as a teaching tool enabling students to comprehend the logic, complexities and overall mechanics of responsive environmental design.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_473
id	ecaadesigradi2019_473
authors	Brandao, Filipe, Paio, Alexandra and Lopes, Adriano
year	2019
title	Interactive algorithm for generating accurate as-built plans by building owners
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 69-78
doi	https://doi.org/10.52842/conf.ecaade.2019.2.069
summary	Mass Customization systems in architecture have yet to adequately address the problem of capturing physical context, a fundamental aspect of dealing with building renovation, which has limited their scope of application. Previous research has demonstrated that existing methods of capturing as-built plans of rooms by non-expert users do not produce sufficiently accurate results for digital fabrication. The present paper reports on research into the development of an algorithm for semi-automated survey of convex or non-convex rooms by building owners. The improved workflow is tested by expert and non-expert users in a to-be renovated building and the results are compared with existing methods of survey.
keywords	Mass Customization; As-built Plans; Building renovation; Polygon partition;
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

For more results click below: